If the key_seq we get in the first messages matches the last_tuple, then
both we and the MS already know the key to use and we don't need the
AUTH REQUEST/RESPONSE cycle.
Security wise ... not so good, and so IMHO the 'auth required' option
in the MSC should always be set. But this allows to turn on ciphering on
a channel without doing any MM transaction, and so the MS doesn't turn
on the T3240 timer which allows to have a ciphered silent-call channel
that won't timeout.
Change-Id: Ief840a2ae7a0ffd2bf0bf726f209a79e3f787646
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
It may happen that either the MS or an EUSE would become
unresponsive during a call independent SS session, e.g.
due to a bug, or a dropped message. In such cases, the
corresponding transaction would remain unfreed forever.
This change introduces a guard timer, that prevents keeping
'stalled' NCSS sessions forever. As soon as it expires, both
sides (i.e. MS and EUSE) are getting notified, and the
transaction is being released.
By default, the timer expires after 30 seconds. As soon as
either the MS, or an EUSE initiates any activity,
the watchdog timer is rescheduled.
The timeout value can be configured from the VTY:
msc
...
! Use 0 to disable this timer
ncss guard-timeout 30
Please note that changing the timeout value at run-time
doesn't affect the existing NCSS sessions, excepting the
case when the timer is disabled at run-time.
This change makes TC_lu_and_ss_session_timeout pass.
Change-Id: Icf4d87c45e90324764073e8230e0fb9cb96dd9cb
Related Change-Id: (TTCN) I3e1791773d56617172ae27a46889a1ae4d400e2f
Related: OS#3655
According to GSM 04.07, the TI flag takes one bit and can be
either of the following:
'0'B - transaction is allocated by sender of a message,
'1'B - transaction is allocated by receiver of a message.
Since we store transaction ID in gsm_trans structure, we also store
TI flag (as a part of transaction ID), which in this context means:
'0'B - transaction is allocated by us (OsmoMSC),
'1'B - transaction is allocated by some MS.
In 100% cases, trans_assign_trans_id() is used to assign transaction IDs
to transactions allocated by us (i.e. OsmoMSC) for MT connections. And
there is no need to use it for MO transactions, because they basically
already do contain a valid transaction ID assigned by the MS.
Change-Id: Ie11999900b1789652ee078d34636dcda1e137eb0
According to GSM 04.80, section 2.5.1, Release complete message
may have an optional Cause IE. Let's add a new function, that
allows to specify cause location and value.
This function will be used by the upcoming changes.
Change-Id: I3b9e8e4f473d113d5b9e9e5d33f7914202077203
Depends Change-Id: (libosmocore) Ie3ac85fcef90a5e532334ba3482804d5305c88d7
The previous implementation of msc_send_ussd_release_complete() was
based on gsm0480_create_ussd_release_complete(), that doesn't
allow to specify GSM 04.07 transaction identifier.
The ability to specify particular transaction identifier
is required for handling multiple SS/USSD transactions.
Change-Id: Id2975c3383f18e83124ba38927c03980d67ddadb
Depends Change-Id: (libosmocore) Ie3ac85fcef90a5e532334ba3482804d5305c88d7
Add an SGs interface (3GPP TS 29.118) to osmo-msc in order to support
SMS tunneling and Circuit Switched Fallback (CSFB)
Change-Id: I73359925fc1ca72b33a1466e6ac41307f2f0b11d
Related: OS#3615
Initially, it was assumed that if there is no active RAN connection,
we can just start counting from 0x00, as there are no other SMS
related transactions, and transaction itself is allocated using
talloc_zero(). Until now it was looking good, but...
As soon as we establish RAN connection with subscriber, we already
have a transaction with SM-RP-MR 0x00, but conn->next_rp_ref also
remains 0x00 - it isn't being increased!
It means that we can face a SM-RP-MR conflict (or collision) if
another MT SMS would arrive to the MSC (from SMSC over GSUP)
when this transaction is still active, i.e. the first SMS is
still being sent, because conn->next_rp_ref++ would
return 0x00 again.
Moreover, there might be already a MO SMS transaction, and using
the conn->next_rp_ref counter wouldn't prevent us from having
duplicate SM-RP-MR value.
Let's get rid of this per-connection counter, and introduce a
function instead, that would iterate over existing transactions
and look for an unused SM-RP-MR value.
This change makes the following test cases pass:
- TC_gsup_mt_sms_rp_mr,
- TC_gsup_mo_mt_sms_rp_mr.
Discovered by: Neels Hofmeyr
Related Change-Id: (TTCN) I3a52d44f4abde9b6b471b9108c1cee905884c9bc
Related Change-Id: (TTCN) I17cbbaa64d9bce770f985588e93cd3eecd732120
Change-Id: Ife6d954c46b7d8348a4221ab677d0355eb3ee7ac
The need to pass a pointer to RAN connection in order to find
a transaction limits possible use cases of trans_find_by_sm_rp_mr(),
e.g. when we need to find a transaction, but RAN connection is not
established yet.
Moreover, the pointer to RAN connection was only used to obtain
pointers to gsm_network and vlr_subscr, so we can just
pass them directly.
Change-Id: I093f36d63e671e50e54fc6236e97a777cc6da77b
There's no need to use 'void *' because we have forward declaration for
'struct gsm_network' in the very same header.
Change-Id: I5078ffcf2706adaca1b5df107f8b6a44062ca28c
When check-imei-req is enabled in the VTY config, do not accept IMEIs
sent by the ME directly anymore. Send the IMEI to the EIR/HLR and wait
for its ACK or NACK.
OsmoHLR also accepts all IMEIs at this point, but this allows to
optionally store the IMEI in the HLR DB.
Depends: Ib240474b0c3c603ba840cf26babb38a44dfc9364 (osmo-hlr)
Related: OS#3733
Change-Id: Ife868ed71c36cdd02638072abebf61fc949080a7
ran_conn_get_conn_id(): instead of a talloc allocated string, return a static
buffer in ran_conn_get_conn_id(). So far this function had no callers.
Refactor ran_conn_update_id() API: during early L3-Complete, when no subscriber
is associated yet, update the FSM Id by the MI type seen in the L3 Complete
message: ran_conn_update_id_from_mi(). Later on set the vsub and re-update.
Call vlr.ops->subscr_update when the TMSI is updated, so that log context
includes the TMSI from then on.
Enrich context for vlr_subscr_name and ran_conn fi name.
Include all available information in vlr_subscr_name(); instead of either IMSI
or MSISDN or TMSI, print all of them when present. Instead of a short log,
rather have more valuable context.
A context info would now look like:
Process_Access_Request_VLR(IMSI-901700000014706:MSISDN-2023:TMSI-0x08BDE4EC:GERAN-A-3:PAGING_RESP)
It does get quite long, but ensures easy correlation of any BSSAP / IuCS
messages with log output, especially if multiple subscribers are busy at the
same time.
Print TMSI and TMSInew in uppercase hexadecimal, which is the typical
representation in the telecom world.
When showing the RAN conn id
GERAN_A-00000017
becomes
GERAN-A-23
- We usually write the conn_id in decimal.
- Leading zeros are clutter and might suggest hexadecimal format.
- 'GERAN-A' and 'UTRAN-Iu' are the strings defined by osmo_rat_type_name().
Depends: I7798c3ef983c2e333b2b9cbffef6f366f370bd81 (libosmocore)
Depends: Ica25919758ef6cba8348da199b0ae7e0ba628798 (libosmocore)
Change-Id: I66a68ce2eb8957a35855a3743d91a86299900834
For each conn, set a default logging category, to distinguish categories for
BSSMAP and RANAP based conns.
LOG_RAN_CONN(): log with the conn's default category,
LOG_RAN_CONN_CAT(): log with a manually set category (mostly for keeping
previous DMM logging on the same category).
In some places, replace LOGP() using manual context with LOG_RAN_CONN(), and
remove the manual context info, now provided by the conn->fi->id.
This is loosely related to inter-BSC and inter-MSC handover: to speed up
refactoring, I want to avoid the need for manual logging context and just use
this LOG_RAN_CONN().
Change-Id: I0a7809840428b1e028df6eb683bc5ffcc8df474a
Make the vsub argument of both vlr_subscr_msisdn_or_name()
and vlr_subscr_name() a const.
The LOGVSUBP() macro uses vlr_subscr_name() and will not generate a
warning anymore when used with a const vsub.
Change-Id: If609269191f4df6186d823a2eee14012846328e2
Replace locally defined enum ran_type with libosmocore's new enum
osmo_rat_type, and value_string ran_type_names with osmo_rat_type_names.
The string representations change, which has cosmetic effects on the test suite
expectations.
Depends: I659687aef7a4d67ca372a39fef31dee07aed7631 (libosmocore)
Change-Id: I2c78c265dc99df581e1b00e563d6912c7ffdb36b
If Assignment fails in the BSC, trigger an EV_TEARDOWN_ERROR in the mgcp_ctx
FSM instance, so that the call gets torn down immediately. Before this, the
non-call would idle around without anything happening.
Related: OS#3236
Depends: I11b182a03f5ecb6df7cd8f260757d3626c8e945d (libosmocore)
Change-Id: I358cfbaf0f44f25148e8b9bafcb9257b1952b35a
The flag is set to true when an assignment has been started, and it is only
relevant for a CC transaction. So fix naming and place in cc struct.
Cosmetic preparation for I1f8746e7babfcd3028a4d2c0ba260c608c686c76 and
I0ba216b737909e92080a722db26e3577726c63cb/
Change-Id: I8dacf46141ba0b664e85b0867ade330c97d8495f
Various places in the code check a flag whether assignment was started and
launch it. To fix incoming-call-during-ongoing-call, I will tweak that logic.
To be able to do that only in one place, remove code dup.
Cosmetic preparation for I1f8746e7babfcd3028a4d2c0ba260c608c686c76 and
I0ba216b737909e92080a722db26e3577726c63cb/
Depends: I11b182a03f5ecb6df7cd8f260757d3626c8e945d (libosmocore: LOGPFSMSL)
Change-Id: I11c0b7dc3f1a747028629b48e522bb3b864884ba
In rare cases, a conn is already associated with a subscriber. So far, we
abort()ed on that, bringing the entire osmo-msc down. Rather log an error and
keep the service running.
In vlr.ops.subscr_assoc, add success/failure return value, and abort the
LU/PARQ on error.
I haven't figured out in detail yet why/how a subscriber would re-launch a
LU/PARQ on a conn that is already associated, so far it is merely clear that we
do not want to crash the MSC if that happens. A log is in OS#3742.
Related: OS#3742, OS#3743
Change-Id: Ic0d54644bc735700220b1ef3a4384c217d57d20f
As a rudiment of OsmoNiTB, OsmoMSC is still involved in SMS
processing, storage (in SQLite DB), and routing (via SMPP).
In real networks this is done by the external entity called
SMSC (SMS Centre), while the MSC is doing re-encapsulation
of GSM 04.11 SM-TL (Transport Layer) payload (i.e. TPDU)
between SM-RL (Relay Layer) and MAP.
Since OsmoMSC itself is not a 'Network in The Box' anymore, it
makes sense to replicate the 'traditional' behaviour of MSC.
The problem is that this behaviour cannot co-exist with the
current implementation, so the key idea is to rip out the
local SMS storage and routing from OsmoMSC, and (re)implement
it in a separate process (OsmoSMSC?).
As a temporary solution, this change introduces a 'kill-switch'
VTY option that enables routing of SMS messages over GSUP
towards ESME (through VLR and HLR), but breaks the local
storage and routing. This is why it's disabled by default.
As soon as we move the SMS processing and storage away from
OsmoMSC, this behaviour would be enabled by default, and
the VTY option would be hidden and deprecated. At the moment,
this option basically does nothing, and will take an effect
in the follow-up changes.
Change-Id: Ie57685ed2ce1e4c978e775b68fdffe58de44882b
Related: OS#3587
We can check if we're parsing the config file by checking
whether vty->type equals VTY_FILE. This avoids the use of
an extra local variable to track the parsing state.
Change-Id: I85161575e025f7c389832427a434bd8e2d6ecc75
Fixes: 1051c42088
Related: OS#3355
Always use LAC which is part of Cell Global ID otherwise we might end up
in a situation where separately stored LAC differs.
Both are described in 3GPP TS 23.008 $2.4 as temporary subscriber data
to be stored in VLR. Both are defined in 3GPP TS 23.003. The LAC is part
of LAI which is part of CGI so there should be no case when those values
differ for a given subscriber.
Change-Id: I993ebc3e14f25e83124b6d3f8461a4b18f971f8e
The 'ipa-name' option can now only be set via the configuration file
because changing the IPA name at run-time conflicts with active
GSUP connections and routes configured in the HLR. The osmo-msc
program must be restarted if its IPA name needs to change.
Change-Id: I6cff91793e646e0396e8f1bc87d0f52709e5f12a
Related: OS#3355
Two reasons:
- the caller of msc_mgcp_ass_complete() from Iu, iucs_rx_rab_assign(), failed
to be adjusted, breaking IuCS, as an --enable-iu --enable-werror build shows.
Unfortunately our gerrit verification doesn't --enable-werror for osmo-msc.
- the condition of requiring ST_MDCX_RAN is faulty, breaking GSM CS.
This reverts commit 212c0c9bda.
Change-Id: I8348675c2f7c8856ea1682d05ee54160d4cfeb96
Add a 'ipa-name' VTY command which overrides the default IPA name
used by the MSC. This is a prerequisite for inter-MSC handover.
Related: OS#3355
Change-Id: I317d6c59f77e92fbb2b875a83dc0ec2fa5cb6006
BSSMAP Assignment Complete: sort MGCP handling upon Assignment Complete to the
proper locations. a_iface_bssap.c is not the right place to invoke the MGCP
related procedures.
- in a_iface_bssap.c only decode the IEs.
- call ran_conn_assign_compl() and pass decoded values.
- drop msc_assign_compl(), it was dead code; instead:
- add ran_conn_assign_compl()
- pass on all MGCP related info to msc_mgcp_ass_complete()
- move all MGCP ctx related handling from a_iface_bssap.c to msc_mgcp.c.
I'm dropping some comments to save some time, because if I adjust them IMHO
they would still anyway restate the obvious.
ran_conn_assign_compl() is now quite a thin shim, but it makes sense to have
it:
- This is the place that should tear down the ran_conn in case assignment
failed, left for a future patch.
- In the light of upcoming inter-MSC handover, ran_conn_assign_compl() will be
the place where the Assignment Complete message might be relayed to a remote
MSC.
Change-Id: I8137215c443239bddf3e69b5715839a365b73b6c
So far the only way to use external MNCC is to pass the -M cmdline arg:
osmo-msc -M /path/to/socket
However, the osmo-msc.service file for systemd is installed by 'make install',
and hence it is quite impractical to depend on such a config item to be
required in the service file:
- It defies any scheme an operator may have in place to compose the
osmo-msc.cfg file -- this option doesn't go in the .cfg file but needs
separate action to add to the installed service file.
- After a make install or package upgrades / re-installations, this option will
be plain overwritten silently, or lead to the need for resolving file
conflicts.
The initial spark for this came from configuring the 35c3 GSM from cfg
templates.
Change-Id: I2ec59d5eba407f83295528b51b93678d446b9cee
gsm_subscriber.h contains some legacy cruft, part of which is that the VLR's
max MSISDN length should rather be defined in vlr.h. Same for GSM_NAME_LENGTH
-> VLR_NAME_LENGTH.
Adjust some sms_queue stuff that anyway includes vlr.h already.
Drop gsm_subscriber.h from vlr.h.
Add other (more concise) includes that thus become necessary, since the include
chain vlr.h->gsm_subscriber.h->gsm_data.h is no longer in place.
Change-Id: Iab5c507ec04fc2884187cf946f6ae2240e4a31f8
Along goes GSM_KEYSEQ_INVAL as VLR_*.
It's where it logically belongs, and is almost the only reason why vlr.h
includes gsm_data.h. The remaining reason, GSM_EXTENSION_LENGTH, will be moved
by upcoming patch.
Change-Id: I122feae7ee3cbc59e941daef35a954bce29fec76
For hysterical raisins, there are some header files that contain few
declarations, and where the name doesn't reflect the content. Combine them to
new msc_common.h:
- common.h
- common_cs.h
- osmo_msc.h
Change-Id: I9e3a587342f8d398fb27354a2f2475f8797cdb28
With the dawn of inter-BSC,MSC handover, adopting the MSC-A,-I,-T roles from
3GPP TS 49.008, the RAN connection shall soon be a neatly separated corner of
osmo-msc, so gravitate ran_conn decarations to files of matching name.
Also, the current chaos of API defined in files with mismatching/meaningless
names drives me crazy.
Change-Id: Ice31e6c43e46678538c65261f150c67e1d0845e5
Following previous rename of gsm_subscriber_connection:
Some functions and #defines are still called like "msc_conn" or just "msc_",
while they are clearly about a RAN conn.
To avoid confusion with the future separate concepts of MSC roles and a RAN
connection, rename all those to match the common "ran_conn" prefix.
Change-Id: Ia17a0a35f11911e00e19cafb5d7828d729a69640
In preparation for inter-BSC and inter-MSC handover, we need to separate the
subscriber management logic from the actual RAN connections. What better time
to finally rename gsm_subscriber_connection.
* Name choice:
In 2G, this is a connection to the BSS, but even though 3GPP TS commonly talk
of "BSS-A" and "BSS-B" when explaining handover, it's not good to call it
"bss_conn": in 3G a BSS is called RNS, IIUC.
The overall term for 2G (GERAN) and 3G (UTRAN) is RAN: Radio Access Network.
* Rationale:
A subscriber in the MSC so far has only one RAN connection, but e.g. for
inter-BSC handover, a second one needs to be created to handover to. Most of
the items in the former gsm_subscriber_connection are actually related to the
RAN, with only a few MM and RTP related items. So, as a first step, just rename
it to ran_conn, to cosmetically prepare for moving the not strictly RAN related
items away later.
Also:
- Rename some functions from msc_subscr_conn_* to ran_conn_*
- Rename "Subscr_Conn" FSM instance name to "RAN_conn"
- Rename SUBSCR_CONN_* to RAN_CONN_*
Change-Id: Ic595f7a558d3553c067f77dc67543ab59659707a
msc_compl_l3() always returns MSC_CONN_ACCEPT, because the conn FSM handles (or
should handle) all reject cases. The accept/reject return value is a legacy
from libbsc internally passing a conn over to libmsc, in osmo-nitb.
Drop enum msc_compl_l3_rc.
Change msc_compl_l3_rc() to return void.
Change all callers to always act like for acceptance, as they always did anyway.
Drop some local variables now no longer needed.
Adjust the comment to msc_compl_l3().
Drop a bunch of #if-0'd code from msc_compl_l3().
Change-Id: I759d15f4e820d5fc16397ed7210ce92308e52a09
On UTRAN, Security Mode is used instead of Ciphering Command, which does not
feature an A5 algorithm id.
Change-Id: Idc7ca9da1aa13ae16f5db2cb1024676cbc770820