For hysterical raisins, there are some header files that contain few
declarations, and where the name doesn't reflect the content. Combine them to
new msc_common.h:
- common.h
- common_cs.h
- osmo_msc.h
Change-Id: I9e3a587342f8d398fb27354a2f2475f8797cdb28
In preparation for inter-BSC and inter-MSC handover, we need to separate the
subscriber management logic from the actual RAN connections. What better time
to finally rename gsm_subscriber_connection.
* Name choice:
In 2G, this is a connection to the BSS, but even though 3GPP TS commonly talk
of "BSS-A" and "BSS-B" when explaining handover, it's not good to call it
"bss_conn": in 3G a BSS is called RNS, IIUC.
The overall term for 2G (GERAN) and 3G (UTRAN) is RAN: Radio Access Network.
* Rationale:
A subscriber in the MSC so far has only one RAN connection, but e.g. for
inter-BSC handover, a second one needs to be created to handover to. Most of
the items in the former gsm_subscriber_connection are actually related to the
RAN, with only a few MM and RTP related items. So, as a first step, just rename
it to ran_conn, to cosmetically prepare for moving the not strictly RAN related
items away later.
Also:
- Rename some functions from msc_subscr_conn_* to ran_conn_*
- Rename "Subscr_Conn" FSM instance name to "RAN_conn"
- Rename SUBSCR_CONN_* to RAN_CONN_*
Change-Id: Ic595f7a558d3553c067f77dc67543ab59659707a
When the VLR requests a Ciphering Mode with vlr_ops.set_ciph_mode(), and if we
need a ciph algo flag from a Classmark information that is not yet known
(usually CM 2 during LU), send a BSSMAP Classmark Request to get it.
To manage the intermission of the Classmark Request, add
- msc_classmark_request_then_cipher_mode_cmd(),
- state SUBSCR_CONN_S_WAIT_CLASSMARK_UPDATE,
- event SUBSCR_CONN_E_CLASSMARK_UPDATE.
From state AUTH_CIPH, switch to state WAIT_CLASSMARK_UPDATE. Once the BSSMAP
Classmark Response, is received, switch back to SUBSCR_CONN_S_AUTH_CIPH and
re-initiate Ciphering Mode.
To be able to re-enter the Ciphering Mode algo decision, factor it out into
msc_geran_set_cipher_mode().
Rationale:
In the following commit, essentially we stopped supporting A5/3 ciphering:
commit 71330720b6
"MSC: Intersect configured A5 algorithms with MS-supported ones"
Change-Id: Id124923ee52a357cb7d3e04d33f585214774f3a3
A5/3 was no longer supported because from that commit on, we strictly checked
the MS-supported ciphers, but we did not have Classmark 2 available during
Location Updating.
This patch changes that: when Classmark 2 is missing, actively request it by a
BSSMAP Classmark Request; continue Ciphering only after the Response. Always
request missing Classmark, even if a lesser cipher were configured available.
If the Classmark Update response fails to come in, cause an attach failure.
Instead, we could attempt to use a lesser cipher that is also enabled. That is
left as a future feature, should that become relevant. I think it's unlikely.
Technically, we could now end up requesting a Classmark Updating both during LU
(vlr_lu_fsm) and CM Service/Paging Response (proc_arq_fsm), but in practice the
only time we lack a Classmark is: during Location Updating with A5/3 enabled.
A5/1 support is indicated in CM1 which is always available, and A5/3 support is
indicated in CM2, which is always available during CM Service Request as well
as Paging Response. So this patch has practical relevance only for Location
Updating. For networks that permit only A5/3, this patch fixes Location
Updating. For networks that support A5/3 and A5/1, so far we always used A5/1
during LU, and after this patch we request CM2 and likely use A5/3 instead.
In msc_vlr_test_gsm_ciph, verify that requesting Classmark 2 for A5/3 works
during LU. Also verify that the lack of a Classmark Response results in attach
failure.
In msc_vlr_test_gsm_ciph, a hacky unit test fakes a situation where a CM2 is
missing during proc_arq_fsm and proves that that code path works, even though
the practical relevance is currently zero. It would only become interesting if
ciphering algorithms A5/4 and higher became relevant, because support of those
would be indicated in Classmark 3, which would always require a Classmark
Request.
Related: OS#3043
Depends: I4a2e1d3923e33912579c4180aa1ff8e8f5abb7e7 (libosmocore)
Change-Id: I73c7cb6a86624695bd9c0f59abb72e2fdc655131
Previously the '*#100#' USSD-request was abused in order to
conclude the current subscriber connection. This makes the unit
tests depend on each other, for example, if one break something
in the GSM 09.11 implementation, a half of tests would fail.
Moreover, the further changes in the GSM 09.11 implementation
will make the results less predictable (i.e. session ID, etc.).
So let's introduce a separate unit test with simple request-
response logic, while more complex tests will be in TTCN.
Change-Id: I40b4caac3113263f5a06c861dff5e10d43c319b5
Remove subscribers which fail to send periodic Location Updates from the
list of subscribers known to the VLR. This complements the IMSI detach
procedure: periodic LU expiry triggers an implicit IMSI detach.
Expired subscribers are purged from a periodic timer which iterates
over all subscribers once per minute.
Subscribers with an active connection do not expire. This is controlled
by the subscriber conn FSM which sets a subscriber's the LU expiry timeout
value to GSM_SUBSCRIBER_NO_EXPIRATION while a connection is active.
Add support for fake time with osmo_clock_gettime() to msc_vlr tests.
This functionality existed in OpenBSC but was lost during the nitb split.
This code took some inspiration from the OpenBSC implementation.
Related: OS#1976
Change-Id: Iebdee8b12d22acfcfb265ee41e71cfc8d9eb3ba9
When sending a BSSMAP Clear or Iu Release, do not immediately discard the conn,
but wait until a BSSMAP Clear Complete / Iu Release Complete has been received.
Hence we will no longer show in the log that an incoming Release/Clear Complete
belongs to an unknown subscriber, but will still be around to properly log the
release.
Related: OS#3122
Change-Id: Ie4c6aaba3866d6e5b98004e8870a215e8cf8ffc1
Clearly distinguish between Ciphering Mode Command on GERAN and Security Mode
Control on UTRAN.
Cosmetic: explicitly verify the key strings in the testing code (not only in
the expected output).
Change-Id: Ica93ed06c4c63dc6768736d25231de8068001114
Three recently merged commits take the msc_vlr_tests in a wrong direction.
The IMSI is usually encoded in the hex streams. The rationale behind hex
streams is that it is a) easily copied from a wireshark trace and b) exactly
the bytes as sent by an actual phone. It is hard to parameterize the IMSI
because we would have to employ our encoding functions, which I intentionally
want to keep out of the loop here.
The test number should not appear in the normal test output, so that adding a
test or changing their order does not affect expected output for following
tests. The nr is simply for manual invocation, only seen when invoked with -v.
Revert
- "VLR tests: always print test parameters"
b0a4314911.
- "Expand VLR tests"
d5feadeee8.
- "Move IMSI into test parameters"
093300d141.
Change-Id: Ie1b49237746751021da88f6f07bbb9f780d077c9
For each test print:
* the test number
* IMSI
Unfortunately tests are organized in such a way that we don't know the
number of particular test in advance. Nevertheless, it make sense to
always print it regardless of -v option presense.
Related: OS#2864
Change-Id: I2e1d7701f5322d2311f32b796148a8b414f53b8e
This makes test routines more flexible and allows to easier re-use them
for tests with different IMSIs.
Change-Id: I74d46fdb7e87dc04c6b82a0b6f3ce6bef60bde58
Related: OS#2864
On MT call, there is a bug in CC conn use which leads to an early free and
use-after-free.
Add msc_vlr_test_call to show both MO and MT call legs separately and reproduce
the failure. It is visible in a sanitizer build (on debian 9).
A subsequent patch will fix the bug: If0659a878deb383ed0300217e2c41c8c79b2b6a5
Related: OS#2672
Change-Id: I6c3ca0c660388b1e2c82df17ec540c846201b0c7
This was originally a long series of commits converging to the final result
seen in this patch. It does not make much sense to review the smaller steps'
trial and error, we need to review this entire change as a whole.
Implement AoIP in osmo-msc and osmo-bsc.
Change over to the new libosmo-sigtran API with support for proper
SCCP/M3UA/SCTP stacking, as mandated by 3GPP specifications for the IuCS and
IuPS interfaces.
From here on, a separate osmo-stp process is required for SCCP routing between
OsmoBSC / OsmoHNBGW <-> OsmoMSC / OsmoSGSN
jenkins.sh: build from libosmo-sccp and osmo-iuh master branches now for new
M3UA SIGTRAN.
Patch-by: pmaier, nhofmeyr, laforge
Change-Id: I5ae4e05ee7c57cad341ea5e86af37c1f6b0ffa77
osmo-nitb becomes osmo-msc
add DIUCS debug log constant
add iucs.[hc]
add msc vty, remove nitb vty
add libiudummy, to avoid linking Iu deps in tests
Use new msc_tx_dtap() instead of gsm0808_submit_dtap()
libmgcp: add mgcpgw client API
bridge calls via mgcpgw
Enable MSC specific CTRL commands, bsc_base_ctrl_cmds_install() still needs to
be split up.
Change-Id: I5b5b6a9678b458affa86800afb1ec726e66eed88
Neels Hofmeyr
Philipp Maier
Neels Hofmeyr