This program tests the gbproxy implementation by passing NS messages
to a modified gbproxy that dumps the resulting messages, signals, and
state.
It focusses on testing abnormal situations like port changes.
Ticket: OW#874
Sponsored-by: On-Waves ehf
This adds a per BTS control command 'timezone' which expects a value
of the format '<hours>,<mins>,<dst>' or 'off' to set the value of
bts->tz. It has the same functionality like the existing VTY command
'timezone' in network/bts.
Sponsored-by: On-Waves ehf
Ticket: OW#978
This adds in-place patching of the time information in the
MM INFORMATION message. The timezone in the 'Local time zone' and
the 'Universal time and local time zone' information elements
and the offset in the 'Network Daylight Saving Time' information
element are optionally set.
The new values are determined by the 'timezone' vty command in the
config_net_bts node. That command is extended by an optional
DST offset parameter.
Tests are provided for the vty part and for the plain
bsc_scan_msc_msg() function.
Sponsored-by: On-Waves ehf
Ticket: OW#978
When verification failed and the reply string was not updated, the
message "Someone forgot to fill in the reply." was shown instead
of the default "Value failed verification." message.
This patch changes the default reply handling in ctrl_cmd_handle()
by setting the reply to NULL initially and then checking it at the
end. If it hasn't been set, a generic message is assigned and an
error is logged.
This script is similar to vty_test_runner.py but tests the control
interface instead.
It currently tests some error cases, BTS status queries, and
setting/clearing rf_locked.
This stores the last SET rf_locked control command along with a
timestamp. The 'show network' vty command is extended to show
this information.
Ticket: OW#659
This prevents the application from crashing when there is a half
configured BTS (e.g. by using the command 'bts 1' when there isn't
a BTS 1) and the 'write' command is used.
Send an USSD message to the mobile station requesting a connection
for a call or a SMS when the link to the MSC is down or in the
grace period.
The messages can be set (and this feature activated) by setting
bsc/missing-msc-text resp. msc/bsc-grace-text via the vty.
The generation of both messages has been tested manually.
Ticket: OW#957
In case of the RLSD coming from the MSC we are patching the address
in-situ but for local calls set con = NULL. We then answered the RLSD
with the wrong reference and the MSC kept on trying.
It was possible to cause a crash by enabling and disabling the
MSC connection. The enabling lead to scheduling a connection
and the second call was not stopping the timer.
Assign a static name to a MSC Connection and use it. In case there
are multiple connections we can now more easily identify them.
This is only used for the NAT right now, the BSC could start to
name the various MSC connections too.
Currently the 'mgcp' command fails in the 'config-nat' node, because
it get confused with 'mgcp-through-msc-ipa' which is executed
instead because of the prefix based command selection. Thus the
latter command is renamed by this patch to avoid the common prefix.
The workaround in the test suite is removed.
Add bsc_install_default() and replace all install_default()
This patch adds bsc_install_default() which calls install_default()
and add 'exit' and 'end'. All other calls to install_default() are
replaced by calls to bsc_install_default().
Since 'exit' and 'end' are now added automatically to each node, the
explicit registrations of these commands are removed by this patch,
too.
The related tests succeed now without work-arounds (except for the
'config' node itself which is part of libosmocore).
ournode_exit() duplicates most of bsc_vty_go_parent(). This patch
fixes the inconsistencies of both functions within
bsc_vty_go_parent() and replaces the implementation of
ournode_exit() by a call to it. This makes 'exit' behave exactly
like ^D in all openbsc nodes.
ournode_end() has been changed to walk through the intermediate
nodes until one of the top nodes is reached. This allows for
cleanups to be done on the way.
Note that in config mode if the tree is searched along the nodes
toward the config node and a command is not found this way, a
rollback is done by just replacing the vty's node and index member
variable by the saved old values which might break the whole thing, when
there has been a free() on the way.
These tests check for the availability of 'exit' and 'end' in each
configuration node and for the node specific commands to traverse
the tree.
In addition, using these commands from within inner contexts is
checked. This will detect problems, when an outer command word is
a prefix of an inner command, like with 'mgcp' and
'mgcp-through-msc-ipa'.
Several assertions are disabled due to inconsistencies and missing
commands (see above).
Addresses:
osmo_bsc_sccp.c:280:2: warning: implicit declaration of function ‘gsm0480_send_ussdNotify’ [-Wimplicit-function-declaration]
osmo_bsc_sccp.c:281:2: warning: implicit declaration of function ‘gsm0480_send_releaseComplete’ [-Wimplicit-function-declaration]
It was possible that the wrong NSEI information was sent to the
BTS. This is because patch_nm_tables is not called before sending
the data to the BTS. This will break when two BTS connect more or
less at the same time.
Stop using the arrays directly and instead introduce a method
that will patch the table and return the data and length. This
makes sure that all users patch the table before we send the
data to the BTS.
I bootstrapped a sysmoBTS and I can bring up rsl. The device is
running with a dummy load so I couldn't do more verification.
Change '%s(bsc)#' to '%s(config-bsc)# '. The missing trailing blank
breaks osmopy's VTYInteract.command() because the blank is contained
in the end patterns which are checked to decide whether to leave the
select loop. Thus trying to execute the 'bsc' command there blocks
the test script forever.
Send an USSD message on each MS connection if the connection to
the MSC has been lost.
Add a vty config command 'bsc-msc-loss-txt' in 'config-msc' to set
the notification string and to enable the feature.
Ticket: OW#957
This command returns the current state of the connection to the USSD
side channel provider. It shows whether a provider has been connected
and authorized or not.
Fixes: OW#953
These commits have been deployed by sysmocom and it should qualify
as some form of smoke testing. Let's see how things go from here.
The by IMSI alertion has not been used, the rest should have been
executed by the system.
There's a VTY option by which for every ESME the user can specify if the
E.212 or E.164 number should be used in DELIVER-SM. The ALERT
notifications generate by subscriber LU have so far always contained the
E.212 (IMSI) rather than E.164 (MSISDN) which is a bit inconsistent.
Rather than copying code, we create a new function that implements
ALERTing all ESMEs.
Jacob Erlbeck
Alexander Huemer
Harald Welte