Get rid of the legacy name bscconfig.h from osmo-nitb times.
Remove the #include from some of the files that aren't actually using it.
Instead of '#include "../../config.h"', use plain '#include "config.h"'
because we're anyway passing $top_srcdir as -I during compilation.
Change-Id: Id4f683be1f36f0630c83da54e02868aae847aeec
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
This looks like a rudiment from OpenBSC, where we have:
#define BSC_API __attribute__((visibility("default")))
However, we don't use this attribute in OsmoMSC.
Change-Id: Ie2f18e9b47eca478f6e4702606068814546e34ce
Moved to doc/manuals/, with full commit history, in preceding merge commit.
Now incorporate in the build system.
Build with:
$ autoreconf -fi
$ ./configure --enable-manuals
$ make
Shared files from osmo-gsm-manuals.git are found automatically if
- the repository is checked out in ../osmo-gsm-manuals; or
- if it osmo-gsm-manuals was installed with "make install"; or
- OSMO_GSM_MANUALS_DIR is set.
Related: OS#3385
Change-Id: Ic3c5add3c87f0aadb1ffab668ce16be6d0805d33
osmo-hlr has recently (as of Change-Id
Iad227bb477d64da30dd6bfbbe1bd0c0a55be9474) a working shared library
implementation of libosmo-gsup-client.
We can remove the local implementation in osmo-msc and use the
system-installed shared library instead.
Change-Id: I6f542945403cf2e3ddac419186b09ec0e2d43b69
The configure script should only check for libsmpp with --enable-smpp.
Also, disable the build of smpp_mirror with --disable-smpp.
Change-Id: Ic4a8a5c970c04a6257ee4c8e3977e98c4ddfda13
Fixes: a55dda703f
Related: If7e1af11cdac8587bb4d66fb4eacee4b79945359
Related: OS#3232
All that is left in libcommon now are the GSUP and OAP client implementations.
These are duplicated in osmo-sgsn.git and make sense to remain somewhat
separate from libmsc. So now they get their own little lib.
Change-Id: Ic71aa119c233b6a0ae169a5b2a53819903d2be82
Provide a sane means of adding the -Werror compiler flag.
Currently, some of our jenkins.sh add -Werror by passing 'CFLAGS="-Werror"',
but that actually *overwrites* all the other CFLAGS we might want to have set.
Maintain these exceptions from -Werror:
a) deprecation (allow upstream to mark deprecation without breaking builds);
b) "#warning" pragmas (allow to remind ourselves of errors without breaking
builds)
As a last configure step before generating the output files, print the complete
CFLAGS and CPPFLAGS by means of AC_MSG_RESULT.
Change-Id: I0528dcb14bf79d0920905a718cc2edea1434c0e5
This avoids potential licensing incompatibility and makes integration of
Debian packaging patches easier.
Related: OS#1694
Change-Id: I71cd631704a4dc155c6c752fee2a42cd6e2fa336
The ipa.py has been moved to osmo-python-tests as osmo_ipa - use it for
vty and ctrl tests instead of local copy. The soap.py and twisted_ipa.py
are not MSC-specific: leftovers from repository split which are now
available in osmo-python-tests as well.
Change-Id: Ia3ab77846c9beae7eca32a81079a4a9bfa4dcc75
libmsc/a_iface.c and libmsc/a_iface_bssap.c still include
osmocom/sccp/sccp_types.h to get access to enums defining SCCP
cause values. Until that is resolved, we have to keep the build
dependency to libosmo-sccp-dev
Change-Id: I957dcb2bcce216d0fd81a58bfe869aca0e4624a8
Related: OS#2601
This is the safe choice, as in absence of automatic testing we don't
know if we actually still build against the [sometimes] ancient
dependencies. Would be great to automatize this, but until we have that,
better be safe.
Change-Id: Idf5cad1dc17a5136d00c970c326cdf3b7ee18e3c
After osmo-mgw changes I8e0b2d2a399b77086a36606f5e427271c6242df1 and
I99f7faab637cfcc22ece64a1dbcbe590f2042187, apply linking of new
libosmo-mgcp-client and renames to drop the "gw" from mgcp_client_*.
Also rename the gsm_network.mgcpgw to mgw, to indicate that the MGCP client is
used to contact the MGW (Media Gateway).
Depends: I8e0b2d2a399b77086a36606f5e427271c6242df1 (osmo-mgw)
I99f7faab637cfcc22ece64a1dbcbe590f2042187 (osmo-mgw)
Change-Id: I093ad02ca0e532f659447c785e09678b3e6f220d
If libosmo-legacy-mgcp is built with --enable-mgcp-transcoding, we need to link
-lgsm here as well. This autodetects whether -lgsm is necessary.
Todo: how about --with-g729?
Todo: osmo-msc is only using the mgcp client and should not actually need
transcoding nor -lgsm.
Change-Id: Iab55a089ae36017b79e7cbc3cac45ef9fd85dd43
Rewire build and includes to libosmo-legacy-mgcp.
Drop osmo-bsc_mgcp and related python tests, now found in osmo-mgw.git.
libosmo-legacy-mgcp is installed from osmo-mgw, hence add the dependency to
jenkins.sh (so far using the pre_release branch).
Change-Id: Ic99d681759edce11564da62500c2aac5cf5fffe2
Remove libiu here, use the functions from libosmo-ranap instead, by applying
the ranap_ / RANAP_ prefix.
Corresponding change-id in osmo-iuh.git is I6a3f7ad15be03fb94689b4af6ccfa828c25f45c0
To be able to run the msc_vlr tests for RAN_UTRAN_IU without Iu client headers
available, add iu_dummy.h, containing mere function signatures that match
iu_dummy.c and a mostly empty struct ranap_ue_conn_ctx.
Make sure we can build with and without --enable-iu: include osmo-iuh headers
only with --enable-iu.
Change-Id: Ib8c4fcdb4766c5e575618b95ce16dce51063206b
This was originally a long series of commits converging to the final result
seen in this patch. It does not make much sense to review the smaller steps'
trial and error, we need to review this entire change as a whole.
Implement AoIP in osmo-msc and osmo-bsc.
Change over to the new libosmo-sigtran API with support for proper
SCCP/M3UA/SCTP stacking, as mandated by 3GPP specifications for the IuCS and
IuPS interfaces.
From here on, a separate osmo-stp process is required for SCCP routing between
OsmoBSC / OsmoHNBGW <-> OsmoMSC / OsmoSGSN
jenkins.sh: build from libosmo-sccp and osmo-iuh master branches now for new
M3UA SIGTRAN.
Patch-by: pmaier, nhofmeyr, laforge
Change-Id: I5ae4e05ee7c57cad341ea5e86af37c1f6b0ffa77
osmo-nitb becomes osmo-msc
add DIUCS debug log constant
add iucs.[hc]
add msc vty, remove nitb vty
add libiudummy, to avoid linking Iu deps in tests
Use new msc_tx_dtap() instead of gsm0808_submit_dtap()
libmgcp: add mgcpgw client API
bridge calls via mgcpgw
Enable MSC specific CTRL commands, bsc_base_ctrl_cmds_install() still needs to
be split up.
Change-Id: I5b5b6a9678b458affa86800afb1ec726e66eed88
Original libvlr code is by Harald Welte <laforge@gnumonks.org>,
polished and tweaked by Neels Hofmeyr <nhofmeyr@sysmocom.de>.
This is a long series of trial-and-error development collapsed in one patch.
This may be split in smaller commits if reviewers prefer that. If we can keep
it as one, we have saved ourselves the additional separation work.
SMS:
The SQL based lookup of SMS for attached subscribers no longer works since the
SQL database no longer has the subscriber data. Replace with a round-robin on
the SMS recipient MSISDNs paired with a VLR subscriber RAM lookup whether the
subscriber is currently attached.
If there are many SMS for not-attached subscribers in the SMS database, this
will become inefficient: a DB hit returns a pending SMS, the RAM lookup will
reveal that the subscriber is not attached, after which the DB is hit for the
next SMS. It would become more efficient e.g. by having an MSISDN based hash
list for the VLR subscribers and by marking non-attached SMS recipients in the
SMS database so that they can be excluded with the SQL query already.
There is a sanity limit to do at most 100 db hits per attempt to find a pending
SMS. So if there are more than 100 stored SMS waiting for their recipients to
actually attach to the MSC, it may take more than one SMS queue trigger to
deliver SMS for subscribers that are actually attached.
This is not very beautiful, but is merely intended to carry us over to a time
when we have a proper separate SMSC entity.
Introduce gsm_subscriber_connection ref-counting in libmsc.
Remove/Disable VTY and CTRL commands to create subscribers, which is now a task
of the OsmoHLR. Adjust the python tests accordingly.
Remove VTY cmd subscriber-keep-in-ram.
Use OSMO_GSUP_PORT = 4222 instead of 2222. See
I4222e21686c823985be8ff1f16b1182be8ad6175.
So far use the LAC from conn->bts, will be replaced by conn->lac in
Id3705236350d5f69e447046b0a764bbabc3d493c.
Related: OS#1592 OS#1974
Change-Id: I639544a6cdda77a3aafc4e3446a55393f60e4050
Original libvlr code is by Harald Welte <laforge@gnumonks.org>,
polished and tweaked by Neels Hofmeyr <nhofmeyr@sysmocom.de>.
This is a long series of trial-and-error development collapsed in one patch.
This may be split in smaller commits if reviewers prefer that. If we can keep
it as one, we have saved ourselves the additional separation work.
Related: OS#1592
Change-Id: Ie303c98f8c18e40c87c1b68474b35de332033622
- bscs.config needed by the vty tests was not picked up as a dist file, because
its suffix is not 'cfg'. Rename to *.cfg. Apply this rename in
vty_test_runner.py and osmo-bsc_nat.cfg.
- Remove restart counters after external tests, otherwise distcheck complains
about uncleaned files.
- Add contrib/ipa.py to EXTRA_DIST, hence add a Makefile.am to contrib/.
Otherwise the python tests cannot find that dependency.
Change-Id: I42b55cb1125099afc3a8e3f87c0e398426b2e2a9
This is the first step in creating this repository from the legacy openbsc.git.
Like all other Osmocom repositories, keep the autoconf and automake files in
the repository root. openbsc.git has been the sole exception, which ends now.
Change-Id: I9c6f2a448d9cb1cc088cf1cf6918b69d7e69b4e7
Neels Hofmeyr
Harald Welte
Oliver Smith
Pau Espin
Alexander Huemer
Neels Hofmeyr
Philipp Maier