Looking at 'perf top' of osmo-msc under load shows that there's a
significant amount of time spent in terms of locking (mutex,...)
which is useless as osmo-msc is a single-threaded application.
Unfortunately libdbi doesn't provide a mechanism to perform
sqlite3_config(), so we have to do it directly here, introducing an
explicit build-time dependency (and linkage) to libsqlite3.
Related: OS#5559
Change-Id: I5bbea90d28b6d73b64b9e5124ff59304b90a8a75
With comments, clarify the code paths where a CM Service use count has
not yet been placed on the conn (just send CM Service Reject) and where
the use count is placed (decrement count on CM Service Reject).
Place the CM Service use count slightly earlier:
- it is then correctly present when checking the mobile identity in
cm_serv_reuse_conn(), avoiding the crash reported in OS#5532.
- there is only one place incrementing the use count instead of two.
Related: OS#5532
Change-Id: I6c735b79b67108bcaadada3f01c7046e262f939b
When using 'check_PROGRAMS', autoconf/automake generates smarter
Makefiles, so that the test programs are not being compiled during
the normal 'make all', but only during 'make check'.
Change-Id: I13b519e61ca0d9ce038e8c989ddac012de4a6c61
RAB Assignment Complete contains no codec info, hence
assignment_complete.codec is not set and
assignment_complete.codec_present is false.
As a result a wrong value is passed to rtp_stream_set_codec.
This fixes osmo-msc sending "a=rtpmap:112 AMR/8000/1" during MDCX in the
RAT-side connection of the call leg after having properly sent
VND.3GPP.IUFP/16000 in CRCX.
Change-Id: Ic028d35893d29f7d72f22f82ef89695229c9b01b
This way the MGW knows it has to handle IuUP in that connection (answer
IuUP Initialization, etc.).
Depends: osmo-mgw.git 1de5ed6f979bd4c1380789c9a82f8e396f05c5f8
Change-Id: I7aca671e00ed27ac03f0d106b5a6b665a9bed4c1
Ciphering is optional in both GERAN and UTRAN, however for the later
it's *required* to enable integrity protection for the signalling.
Thus we must always send Security Mode Command in UTRAN, even in
case if ciphering is disabled (UEA0) in the configuration.
The actual decision whether to send CMC/SMC or not is taken in:
* vlr_access_req_fsm.c / _proc_arq_vlr_node2(), and
* vlr_lu_fsm.c / vlr_loc_upd_post_auth().
depending on the value returned by is_ciph_required(). Let's
rename this function to is_cmc_smc_required() and ensure that
it always returns true in UTRAN.
This change fixes the Iu test cases in ttcn3-msc-test.
Change-Id: I6205f13453eff7afbf25e013d72ae98a78fcd31b
Fixes: OS#5333
RANAP Security Command can include an encryption IE. If it includes
it the RNC can still ignore it (e.g. unsupported encryption) and
return the Security Command Complete with an choosen encryption IE:
"no encryption".
Validate the encryption element and ensure the encryption is included in
the encryption mask.
Closes: OS#4144
Change-Id: Icfc135c8b8ae862defe7114db492af600c26407f
Allow the user fine-grained control over which UMTS encryption
algorithms are permitted, rather than always permitting UEA1 and UEA2
or neither.
This brings the handling of UEA in line with the handling of A5 for
GERAN.
Change-Id: I91f9e50f9c1439aa19528f887b83ae9de628fcfd
Closes: OS#4144
Depends: osmo-iuh.git I6d2d033b0427bdc84fee61e0f3cb7b29935214bf
The log output of libosmo-mgcp-client has changed. This change causes
the unit tests to fail because the log output does not match anymore.
Lets disable the DLMGCP log output since it is of minor importance
for VLR testing anyway.
Change-Id: Id197e4ab9ba12e284299ef520edee9c362513bf1
Related: SYS#5091
As seen in a running osmo-msc:
"vlr_access_req_fsm.c:153
msc_a(IMSI-....:MSISDN-...:TMSI-0x...:GERAN-A-8:CM_SERVICE_REQ){MSC_A_ST_RELEASING}:
Event MSC_A_EV_CN_CLOSE not permitted"
Also seen in several unit tests, which need update.
The action event handler for that state is actually already
expecting/handling the event by ignoring it, so we should allow it.
Change-Id: I4d30cffab693529aab3ba736419dec116a4dd7ef
Let's disable category here since we don't care about its formatting here.
In any case, every test relying on logging output validation should
always explicitly state the config to avoid issues in the future if
default values change.
Change-Id: I089c0001fc75e81558c3e860827e4d434cf1eab3
Related: OS#5034
Calling gsm48_cc_tx_release() before mncc_release_ind() has a side
effect: the former may change CC state to GSM_CSTATE_RELEASE_REQ.
This makes the later send MNCC_REL_CNF instead of MNCC_REL_IND, so
if one of the call leg disconnects due to RF failure, the other one
will not be terminated correctly.
Makes both TC_{mo,mt}_call_clear_request TTCN-3 test cases pass.
Change-Id: I3ad4a99757878de3796027325627c87d9a4e93f1
Related: Id16969fe0de04445d1320a96d35cf1d48cc8cf09
Related: SYS#5340
The msc_vlr_tests verify whether any of the tests run contain msgb or
talloc memory leaks. So far they did so by fixating a specific number of
talloc blocks, which may break by library implementations changing.
Instead, verify that the test leaks no allocations by comparing talloc
blocks before and after each test.
When a leak is detected, print the full talloc report to stderr, which
makes the expected output mismatch the actual output and fails the test.
Related: OS#4311
Change-Id: I8537fa76d460c951302932a1bad4299f7fe398c9
So far, the cmdline argument was the only way to set a database file.
Add a similar config to VTY as 'msc' / 'sms-database'. The cmdline arg is stronger
than the 'database' cfg item. DB is not reloaded from VTY command.
Change-Id: I18d954c30fcceb0b36a620b927fd3a93dcc79f49
We're already sending the RANAP CommonID message to the RNC,
let's do the same using BSSMAP CommonId towards the BSC. This
way the BSC knows about the IMSI of the served subscriber, which
is very useful for logging/debugging.
Change-Id: I2552736477663adb250c55728093500e8ae83ebb
Closes: OS#2969
Depends: libosmocore.git I353adc1aa72377f7d4b3336d2ff47791fb73d62c
This patch served for a manual testing counterpart for osmo-bsc to implement
MSC pooling.
This enables a basic MSC pooling setup, but for a production setup, osmo-msc
would still lack various features related to unloading subscribers to another
MSC as explained in 3GPP TS 23.236.
Change-Id: Iafe0878a0a2c8669080d757b34a398ea75fced36
There is an invalid Mobile Identity in the msc_vlr_test_gsm_ciph test data.
This became apparent when applying the new osmo_mobile_identity API (in a
following patch). Current Mobile Identity API ignores the error.
Change-Id: Ib1d54c59acc8b716de471ca275f54f9d22da3574
Since the split of OsmoNiTB, OsmoMSC does not deal with the radio
access network directly. Therefore the only purpose of T3212 is to
control subscriber expiration in the local VLR. The timeout value
indicated in System Information Type 3 needs to be configured
separately in the BSC/RNC.
This means that we don't need to store it in deci-hours anymore.
Let's move T3212 to the group of VLR specific timers, so it can
be configured and introspected using the generic 'timer' command,
and deprecate the old '[no] periodic location update' command.
It should be also noted that in the old code subscriber expiration
timeout was actually set to twice the T3212 value plus one minute.
After this change, we apply the configured value 'as-is', but
keep the old behaviour for 'periodic location update' command.
Change-Id: I9b12066599a7c834a53a93acf5902d91273bc74f
In order for osmo-hlr to be able to 100% guarantee distinct INDs for CS and PS,
set CN-Domain = CS in all SendAuthInfo Requests.
In Milenage auth, it is highly desirable that osmo-hlr guarantees use of
distinct INDs for CS and PS domains. If an MSC and SGSN attached at the same
time use the same IND bucket to generate Milenage SQN, that collision would
rapidly waste SQNs and load osmo-hlr with requesting new auth tuples on each
CS/PS Complete-Layer3.
So far, osmo-msc did not indicate the CN domain in the GSUP SendAuthInfo
Request, which was neither required nor evaluated. The CN-Domain is only sent
for the UpdateLocation Request that usually follows later.
Related: OS#4318
Change-Id: I22f44068268e62801cadbf6542efaf153423cd65
Substantial parts of the CC / MNCC call establishment were so far completely
missing from the msc_vlr_test_call.c tests. With my new insights on CC and MNCC
procedures, complete the tests.
Root reason: since I am going to re-order the sequence of events to enable
codec negotiation via SDP in MNCC, I want to have comprehensive tests of the CC
procedures to see the effect as diffs in the test output.
Change-Id: Ie995e264eb1e3dd9558a1753ff6f9b55c1d084e1
If an incoming MNCC_SETUP_REQ ends up in Paging (as usually it does), the early
return so far skipped logging of that MNCC message. Add this logging.
Change-Id: I1495dd562a06cf6c1e9453a1fe111bdf8f4be081
So far, the logging said only "RAN encode: BSSMAP: DTAP", but not *which* DTAP
message, which is in fact a very interesting detail when reading osmo-msc logs.
Change-Id: I0cb8d1e3307737ffe53730c64bb984adacedb2da
For all CC type transaction logging, log the current trans->cc.state string for
all LOG_TRANS*() logging.
Change-Id: I67be12c74c679ce684f8c0b9b4e0d96299849dc6
We sometimes see errors like
libmsc/msc_a.c:361 msc_a(...){MSC_A_ST_RELEASING}: transition to state MSC_A_ST_RELEASING not permitted!
i.e. changing state to the state msc_a is already in.
Ignore re-entering the same state for most state changes. However, there is one
state change in msc_a where re-entering the MSC_A_ST_VALIDATE_L3 is necessary
to start the timeout.
Hence add msc_a_state_chg_always() and use that for re-entering
MSC_A_ST_VALIDATE_L3. Change msc_a_state_chg() to skip no-op state changes.
This should silence all no-op state change error messages for msc_a.
Related: OS#4169
Change-Id: I0c74c10b5fa7bbdd6ae3674926cc0393edf15a35
To not break the msc_vlr tests by new GSUP IEs added to some of the GSUP
messages, make msc_vlr_tests only match the start of the GSUP message and not
care about extra IEs. The extra IEs are anyway seen in the expected logs.
The reason to drop the msgb_eq_data_print() is because it is useless for
mismatching lengths. It will always print only the length mismatch, instead we
need to be able to compare with what was expected.
Change-Id: I38d51eeafab04ece83e4bb87bfaa967506f97b11
Distinguish the enclosed DTAP RR Ciphering Mode Complete message from the outer
BSSMAP Cipher Mode Complete message in the DEBUG log.
Change-Id: I80c69b491e2ddb932bc4295a01caaf6a903b1fe4
Recently, the ability to run UTRAN without encryption was added, but the config
for it was tied to the A5 GERAN encryption configuration. This affected
osmo-msc's default behavior of Iu, breaking osmo-msc ttcn3 Iu tests: the ttcn3
test suite sets A5 to 0 (no encryption) but still expects Iu to enable air
encryption. Fix this "regression".
Add a separate vty config option for UEA encryption, even if it does not
provide full granularity to select individual UEA algorithms yet.
As a result, Iu default behavior remains to enable encryption regardless of the
A5 config. UTRAN encryption can be disabled by the new cfg option
"encryption uea 0" alone.
Even though the new vty command already allows passing various combinations of
the UEA algorithm numbers, only '0' and '1 2' are accepted as valid
combinations, to reflect current osmo-msc capabilities.
Revert most changes to the msc_vlr test suite in commit "do not force
encryption on UTRAN" (I04ecd7a3b1cc603b2e3feb630e8c7c93fc36ccd7): use new
net->iu_encryption instead of net->a5_encryption_mask.
Adjust/add to test_nodes.vty transcript tests.
Related: OS#4144
Change-Id: Ie138f2fcb105533f7bc06a6d2e6deccf6faccc5b
Following I04ecd7a3b1cc603b2e3feb630e8c7c93fc36ccd7, have tests for UMTS
authentication both for cases with and without encryption.
- Rename test_umts_authen_utran to test_umts_auth_ciph_utran() (uses
encryption).
- Again add test_umts_authen_utran() not using encryption.
- Likewise with test_umts_authen_resync_utran().
Some permutations are still missing, like UMTS AKA on GERAN with encryption
enabled; not bothering at the moment.
Related: OS#2783
Change-Id: I54227f1f08c38c0bf69b9c48924669c4829b04b9
Remove the conditions that always enable encryption on UTRAN.
We so far lack an explicit configuration for UTRAN encryption, and this patch
does not add any either. Instead, whether UTRAN encryption is enabled is simply
triggered on whether GERAN has A5 encryption enabled (A5/n with n > 0). Though
GERAN and UTRAN encryption are not technically related at all, this makes UTRAN
behave like GERAN for now, until we implement a proper separate configuration
for UTRAN encryption.
Adjust the msc_vlr_test_* configuration by setting the net->a5_encryption_mask
such that the expected output remains unchanged. A subsequent patch
(I54227f1f08c38c0bf69b9c48924669c4829b04b9) will add more tests, particularly
cases of UTRAN without encryption.
Adjust manual and vty doc.
Related: OS#2783
Change-Id: I04ecd7a3b1cc603b2e3feb630e8c7c93fc36ccd7
GSM 04.08 10.5.4.11
The Release indication needs to have the Coding Standard set.
For phones that would display a message on screen, such as
"Number not in use", if the coding standard is not defined,
the display may show "Error in Connection"
Change-Id: Ib28b62a41d433e231cff5910d19455296b284df6
Don't call tx_lu_rej() in the "vlr_lu_compl" FSM. It is always getting
called in the parent "lu" FSM and is therefore redundant:
_vlr_lu_compl_fsm_done(fi, VLR_FSM_RESULT_FAILURE, cause)
-> osmo_fsm_inst_state_chg(fi, LU_COMPL_VLR_S_DONE, 0, 0)
-> vlr_lu_compl_fsm_dispatch_result()
-> lu_fsm_wait_lu_compl()/lu_fsm_wait_lu_compl_standalone()
-> lu_fsm_failure()
-> lfp->vlr->ops.tx_lu_rej()
I have noticed the bug with the TTCN3 tests. This patch fixes
TC_lu_imsi_auth_tmsi_check_imei_{nack,err} after stricter checking
in [1] and also TC_iu_mo_crcx_ran_reject.
[1] I836f76242463789c4c003feec757714827f2a31b (osmo-ttcn3-hacks)
Change-Id: I127b27937613ea0ff29d67991c0414fca6d441d9
osmo_counter will be soon deprecated. Use the newer and more flexible
osmo_stat_item instead.
Depends on: Id2462c4866bd22bc2338c9c8f69b775f88ae7511 (libosmocore)
Change-Id: I6a20123b263f4f808153794ee8a735092deb399e
The function name implies OSMO_RAT_GERAN_A, and it has nothing
to do with other OSMO_RAT_* types. Found using clang:
warning: too many arguments in call to 'expect_bssap_clear'
expect_bssap_clear(OSMO_RAT_GERAN_A);
^^^^^^^^^^^^^^^^
Change-Id: Id3a3af33fcc5da4ca4c48a2f589a69f3568d2586
In gsm0911_gsup_rx() we do call vlr_subscr_find_by_imsi(), which
increases subscriber's reference count by one using the function
name as the token. However, we never release this token, so the
reference count grows on every received GSUP PROC-SS message.
Change-Id: I5540556b1c75f6873883e46b78656f31fc1ef186
In case of network-originated SS/USSD session establishment, we
need to verify the received GSUP PROC_SS_REQ message and make
sure that all mandatory IEs are present.
There is no sensible need to allocate a new transaction before
doing all the checks, other than the ability to use LOG_TRANS().
This complicates the code, so let's avoid the early allocation.
Change-Id: I4e027b19e8065a39324a1647957cef4066b82ce7
It is expected that establish_nc_ss_trans() returns an allocated
transaction in successful case, or NULL in case of error. The
function assumes two scenarios:
- the subscriber already has an active RAN connection,
- RAN connection needs to be established (Paging).
In the first case, a pointer to the transaction is returned as
expected, but in case of Paging, NULL has always been returned,
even if there were no errors. Let's fix this.
Change-Id: I9dcee64dd0b435ef29630c223132b81724701f93
We also need stubs for the upcoming db_sms tests.
Due to a known bug of automake [1], we cannot use 'subdir-objects',
so as a side effect this change introduces some autoreconf warnings.
[1] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=752993
Change-Id: I8846c940f2695fd33e1007fecac83e73f508bb34
When 'check-imei-rqd 1 early' is set in the config, send the IMEI to
the HLR before doing the location update with the HLR.
The OsmoHLR documentation referenced in the code will be added in
osmo-hlr.git's Change-Id I2dd4a56f7b8be8b5d0e6fc32e04459e5e278d0a9.
Related: OS#2542
Change-Id: I88283cad23793b475445d814ff49db534cb41244
Harald Welte
Neels Hofmeyr
Vadim Yanitskiy
Pau Espin
Alexander Couzens
Philipp Maier
Keith Whyte
Martin Hauke
Oliver Smith