Looking at 'perf top' of osmo-msc under load shows that there's a
significant amount of time spent in terms of locking (mutex,...)
which is useless as osmo-msc is a single-threaded application.
Unfortunately libdbi doesn't provide a mechanism to perform
sqlite3_config(), so we have to do it directly here, introducing an
explicit build-time dependency (and linkage) to libsqlite3.
Related: OS#5559
Change-Id: I5bbea90d28b6d73b64b9e5124ff59304b90a8a75
With comments, clarify the code paths where a CM Service use count has
not yet been placed on the conn (just send CM Service Reject) and where
the use count is placed (decrement count on CM Service Reject).
Place the CM Service use count slightly earlier:
- it is then correctly present when checking the mobile identity in
cm_serv_reuse_conn(), avoiding the crash reported in OS#5532.
- there is only one place incrementing the use count instead of two.
Related: OS#5532
Change-Id: I6c735b79b67108bcaadada3f01c7046e262f939b
When using 'check_PROGRAMS', autoconf/automake generates smarter
Makefiles, so that the test programs are not being compiled during
the normal 'make all', but only during 'make check'.
Change-Id: I13b519e61ca0d9ce038e8c989ddac012de4a6c61
RAB Assignment Complete contains no codec info, hence
assignment_complete.codec is not set and
assignment_complete.codec_present is false.
As a result a wrong value is passed to rtp_stream_set_codec.
This fixes osmo-msc sending "a=rtpmap:112 AMR/8000/1" during MDCX in the
RAT-side connection of the call leg after having properly sent
VND.3GPP.IUFP/16000 in CRCX.
Change-Id: Ic028d35893d29f7d72f22f82ef89695229c9b01b
This way the MGW knows it has to handle IuUP in that connection (answer
IuUP Initialization, etc.).
Depends: osmo-mgw.git 1de5ed6f979bd4c1380789c9a82f8e396f05c5f8
Change-Id: I7aca671e00ed27ac03f0d106b5a6b665a9bed4c1
Ciphering is optional in both GERAN and UTRAN, however for the later
it's *required* to enable integrity protection for the signalling.
Thus we must always send Security Mode Command in UTRAN, even in
case if ciphering is disabled (UEA0) in the configuration.
The actual decision whether to send CMC/SMC or not is taken in:
* vlr_access_req_fsm.c / _proc_arq_vlr_node2(), and
* vlr_lu_fsm.c / vlr_loc_upd_post_auth().
depending on the value returned by is_ciph_required(). Let's
rename this function to is_cmc_smc_required() and ensure that
it always returns true in UTRAN.
This change fixes the Iu test cases in ttcn3-msc-test.
Change-Id: I6205f13453eff7afbf25e013d72ae98a78fcd31b
Fixes: OS#5333
RANAP Security Command can include an encryption IE. If it includes
it the RNC can still ignore it (e.g. unsupported encryption) and
return the Security Command Complete with an choosen encryption IE:
"no encryption".
Validate the encryption element and ensure the encryption is included in
the encryption mask.
Closes: OS#4144
Change-Id: Icfc135c8b8ae862defe7114db492af600c26407f
Allow the user fine-grained control over which UMTS encryption
algorithms are permitted, rather than always permitting UEA1 and UEA2
or neither.
This brings the handling of UEA in line with the handling of A5 for
GERAN.
Change-Id: I91f9e50f9c1439aa19528f887b83ae9de628fcfd
Closes: OS#4144
Depends: osmo-iuh.git I6d2d033b0427bdc84fee61e0f3cb7b29935214bf
Using *unpacked* 'struct osmo_gcr_parsed' in the MNCC PDUs makes
the protocol even more complicated than it currently is, and
moreover complicates implementing MNCCv8 in the ttcn3-sip-test.
Replace 'struct osmo_gcr_parsed' in 'struct gsm_mncc' with a
fixed-length buffer, which is supposed to hold the Global Call
Reference encoded as per 3GPP TS 29.205.
Indicate presence of GCR using the MNCC_F_GCR flag.
Change-Id: I259b6d7e4cbe26159b9b496356fc7c1c27d54521
Fixes: I705c860e51637b4537cad65a330ecbaaca96dd5b
Related: OS#5164, OS#5282
This commit is largely based on work by
Max <msuraev@sysmocom.de>
Adds LCLS parameters for A-interface transactions
This commit also adds a vty option to facilitate globally
disabling LCLS for all calls on this MSC.
Add a global call reference (GCR) to MNCC and therefore
bump the MNCC version to version 8. (This commit has to be
merged at the same time as the corresponing commit in the
osmo-sip-connector for mncc-external use.)
Depends: osmo-sip-connector Id40d7e0fed9356f801b3627c118150055e7232b1
Change-Id: I705c860e51637b4537cad65a330ecbaaca96dd5b
The log output of libosmo-mgcp-client has changed. This change causes
the unit tests to fail because the log output does not match anymore.
Lets disable the DLMGCP log output since it is of minor importance
for VLR testing anyway.
Change-Id: Id197e4ab9ba12e284299ef520edee9c362513bf1
Related: SYS#5091
As seen in a running osmo-msc:
"vlr_access_req_fsm.c:153
msc_a(IMSI-....:MSISDN-...:TMSI-0x...:GERAN-A-8:CM_SERVICE_REQ){MSC_A_ST_RELEASING}:
Event MSC_A_EV_CN_CLOSE not permitted"
Also seen in several unit tests, which need update.
The action event handler for that state is actually already
expecting/handling the event by ignoring it, so we should allow it.
Change-Id: I4d30cffab693529aab3ba736419dec116a4dd7ef
Add A5/4 to the internal mask of allowed algorithms.
(Not actually working yet, A5/4 implementation follows in other
patches.)
Related: SYS#5324
Change-Id: I5b46aaa8579f8d069ca39caf996a8795ffe63dd7
Let's disable category here since we don't care about its formatting here.
In any case, every test relying on logging output validation should
always explicitly state the config to avoid issues in the future if
default values change.
Change-Id: I089c0001fc75e81558c3e860827e4d434cf1eab3
Related: OS#5034
Calling gsm48_cc_tx_release() before mncc_release_ind() has a side
effect: the former may change CC state to GSM_CSTATE_RELEASE_REQ.
This makes the later send MNCC_REL_CNF instead of MNCC_REL_IND, so
if one of the call leg disconnects due to RF failure, the other one
will not be terminated correctly.
Makes both TC_{mo,mt}_call_clear_request TTCN-3 test cases pass.
Change-Id: I3ad4a99757878de3796027325627c87d9a4e93f1
Related: Id16969fe0de04445d1320a96d35cf1d48cc8cf09
Related: SYS#5340
The msc_vlr_tests verify whether any of the tests run contain msgb or
talloc memory leaks. So far they did so by fixating a specific number of
talloc blocks, which may break by library implementations changing.
Instead, verify that the test leaks no allocations by comparing talloc
blocks before and after each test.
When a leak is detected, print the full talloc report to stderr, which
makes the expected output mismatch the actual output and fails the test.
Related: OS#4311
Change-Id: I8537fa76d460c951302932a1bad4299f7fe398c9
In this case we are fine with simply updating test result because anyway
ABI breakage in some libosmo-mgcp-client structs was needed, so new
versions of osmo-msc will require new versions of libosmo-mgcp-client.
Change-Id: I1fbdb95f71d3b9a2dc88e1ba79892ae16485aa99
So far, the cmdline argument was the only way to set a database file.
Add a similar config to VTY as 'msc' / 'sms-database'. The cmdline arg is stronger
than the 'database' cfg item. DB is not reloaded from VTY command.
Change-Id: I18d954c30fcceb0b36a620b927fd3a93dcc79f49
We're already sending the RANAP CommonID message to the RNC,
let's do the same using BSSMAP CommonId towards the BSC. This
way the BSC knows about the IMSI of the served subscriber, which
is very useful for logging/debugging.
Change-Id: I2552736477663adb250c55728093500e8ae83ebb
Closes: OS#2969
Depends: libosmocore.git I353adc1aa72377f7d4b3336d2ff47791fb73d62c
Adopt the same way to run manual vty transcript tests as in
osmo-bsc/test/Makefile.am.
There are different ways to select a specific test to run in osmo-bsc and here
in osmo-msc. The osmo-bsc way is more convenient when building outside the src
tree, because it does not need the full absolute path of the test file.
Change-Id: If1e2abfa321a5e9fb60358d1f0e4e448b33184af
This patch served for a manual testing counterpart for osmo-bsc to implement
MSC pooling.
This enables a basic MSC pooling setup, but for a production setup, osmo-msc
would still lack various features related to unloading subscribers to another
MSC as explained in 3GPP TS 23.236.
Change-Id: Iafe0878a0a2c8669080d757b34a398ea75fced36
There is an invalid Mobile Identity in the msc_vlr_test_gsm_ciph test data.
This became apparent when applying the new osmo_mobile_identity API (in a
following patch). Current Mobile Identity API ignores the error.
Change-Id: Ib1d54c59acc8b716de471ca275f54f9d22da3574
The example configs suggest to use a random ip-address as MGW address.
Lets use a loopback address here. This will suit the usual case where
MGW and MSC run together on the same machine.
Change-Id: Ie2b2094fdcfed45353d9ba22cb07eed626fd143c
Since the split of OsmoNiTB, OsmoMSC does not deal with the radio
access network directly. Therefore the only purpose of T3212 is to
control subscriber expiration in the local VLR. The timeout value
indicated in System Information Type 3 needs to be configured
separately in the BSC/RNC.
This means that we don't need to store it in deci-hours anymore.
Let's move T3212 to the group of VLR specific timers, so it can
be configured and introspected using the generic 'timer' command,
and deprecate the old '[no] periodic location update' command.
It should be also noted that in the old code subscriber expiration
timeout was actually set to twice the T3212 value plus one minute.
After this change, we apply the configured value 'as-is', but
keep the old behaviour for 'periodic location update' command.
Change-Id: I9b12066599a7c834a53a93acf5902d91273bc74f
These timers so far were implemented as a list of unsigned integers,
which has never been initialized to any reasonable defaults. Since
they are used as state timeouts in several FSMs, we might end up
staying in some state forever.
Let's migrate to generic osmo_tdef API and use default values from
table 11.2 of 3GPP TS 24.008. This way the user can introspect and
change their values from the VTY / configuration file.
Change-Id: Ia8cf98da0aea0e626c5ff088a833d7359c43847f
Related: OS#4368
This change introduces several new VTY commands letting the user
a possibility to introspect and reconfigure some of the existing
timers implemented using libosmocore's osmo_tdef API.
At the moment this covers the following timers:
- MGW specific timers:
- X1 - MGCP response timeout,
- X2 - RTP stream establishing timeout,
- RAN specific timers (same names for GERAN and UTRAN):
- X1 - Authentication and Ciphering timeout,
- X2 - RAN connection release sanity timeout,
- X3 - Handover procedure timeout.
The following commands are introduced:
- 'enable' node:
- show timer [(mgw|mncc|sccp|geran|utran|sgs)] [TNNNN]
- 'config-msc' node:
- timer [(mgw|mncc|sccp|geran|utran|sgs)] [TNNNN] [(<0-2147483647>|default)]
Both MNCC and SCCP related timer definitions are empty at the
moment. Achieved by using osmo_tdef_group API of libosmovty.
Change-Id: I6024c104b6101666c8aa1108a043910eb75db9a5
Related: OS#4368
Make build and external tests work with python3, so we can drop
the python2 dependency.
This should be merged shortly after osmo-python-tests was migrated to
python3, and the jenkins build slaves were (automatically) updated to
have the new osmo-python-tests installed.
Related: OS#2819
Depends: osmo-python-tests I3ffc3519bf6c22536a49dad7a966188ddad351a7
Change-Id: I53ccde96dd3785098df0f7d693c504c8b8302e90
In order for osmo-hlr to be able to 100% guarantee distinct INDs for CS and PS,
set CN-Domain = CS in all SendAuthInfo Requests.
In Milenage auth, it is highly desirable that osmo-hlr guarantees use of
distinct INDs for CS and PS domains. If an MSC and SGSN attached at the same
time use the same IND bucket to generate Milenage SQN, that collision would
rapidly waste SQNs and load osmo-hlr with requesting new auth tuples on each
CS/PS Complete-Layer3.
So far, osmo-msc did not indicate the CN domain in the GSUP SendAuthInfo
Request, which was neither required nor evaluated. The CN-Domain is only sent
for the UpdateLocation Request that usually follows later.
Related: OS#4318
Change-Id: I22f44068268e62801cadbf6542efaf153423cd65
Add a char buffer of 1024 characters length as space for SDP to pass to /
receive from MNCC.
Actually support receiving MNCC without such an SDP tail. The main reason for
this is to avoid the need to adjust the ttcn3 implementation of MNCC: it would
stop working for older osmo-msc.
Older or non-SIP MNCC peers could operate the previous MNCC protocol unchanged
(save the protocol number bump) without having to implement SDP.
The SDP part in the MNCC protocol will be used in upcoming patch
I8c3b2de53ffae4ec3a66b9dabf308c290a2c999f.
This patch must be merged at the same time as osmo-sip-connector patch
Iaca9ed6611fc5ca8ca749bbbefc31f54bea5e925, so that both sides have a matching
MNCC protocol version number.
Change-Id: Ie16f0804c4d99760cd4a0c544d0889b6313eebb7
Rationale: in order to add full SDP to the MNCC protocol (upcoming patch
I8c3b2de53ffae4ec3a66b9dabf308c290a2c999f), we need to parse and compose SDP
messages. Obviously, libosmo-mgcp-client already contains similar code, but
that is unfortunately heavily glued to the actual MGCP implementation. The
simplest solution is to create this separate implementation, copy-pasting from
the existing libosmo-mgcp-client code as is convenient.
This API is added here to probe whether it works well. When it does, the
intention is to "move it up" to osmo-mgw and overhaul the SDP parsing in our
MGCP client and MGCP server APIs using this same API.
Change-Id: If3ce23cd5bab15e2ab4c52ef3e4c75979dffe931
Substantial parts of the CC / MNCC call establishment were so far completely
missing from the msc_vlr_test_call.c tests. With my new insights on CC and MNCC
procedures, complete the tests.
Root reason: since I am going to re-order the sequence of events to enable
codec negotiation via SDP in MNCC, I want to have comprehensive tests of the CC
procedures to see the effect as diffs in the test output.
Change-Id: Ie995e264eb1e3dd9558a1753ff6f9b55c1d084e1
If an incoming MNCC_SETUP_REQ ends up in Paging (as usually it does), the early
return so far skipped logging of that MNCC message. Add this logging.
Change-Id: I1495dd562a06cf6c1e9453a1fe111bdf8f4be081
Fix vty tests that are failing since libosmocore change
Ic225232fbfca49ba868427eaf898e1f6e34e1ca8. If OsmoMSC is built without
IU support, it fails with "cs7-instance-iu" in the config.
Change-Id: Ie56da9167badfd2399b566af91a345103f46c2a1
So far, the logging said only "RAN encode: BSSMAP: DTAP", but not *which* DTAP
message, which is in fact a very interesting detail when reading osmo-msc logs.
Change-Id: I0cb8d1e3307737ffe53730c64bb984adacedb2da
For all CC type transaction logging, log the current trans->cc.state string for
all LOG_TRANS*() logging.
Change-Id: I67be12c74c679ce684f8c0b9b4e0d96299849dc6
We sometimes see errors like
libmsc/msc_a.c:361 msc_a(...){MSC_A_ST_RELEASING}: transition to state MSC_A_ST_RELEASING not permitted!
i.e. changing state to the state msc_a is already in.
Ignore re-entering the same state for most state changes. However, there is one
state change in msc_a where re-entering the MSC_A_ST_VALIDATE_L3 is necessary
to start the timeout.
Hence add msc_a_state_chg_always() and use that for re-entering
MSC_A_ST_VALIDATE_L3. Change msc_a_state_chg() to skip no-op state changes.
This should silence all no-op state change error messages for msc_a.
Related: OS#4169
Change-Id: I0c74c10b5fa7bbdd6ae3674926cc0393edf15a35
Add a network -> callwaiting VTY command as boolean.
When this is enabled (default) there is no change to
operation previous to this commit.
When this switch is disabled with "no call-waiting" in vty
then when a call arrives, we will check if we have an active
call transaction for this subscriber, no matter if it is
establishing, established, or alerting, in any of these cases we
will return USER BUSY to the calling party.
Change-Id: I3eb6f23f7103e3002874fb5d3a30c9de952202ae
To not break the msc_vlr tests by new GSUP IEs added to some of the GSUP
messages, make msc_vlr_tests only match the start of the GSUP message and not
care about extra IEs. The extra IEs are anyway seen in the expected logs.
The reason to drop the msgb_eq_data_print() is because it is useless for
mismatching lengths. It will always print only the length mismatch, instead we
need to be able to compare with what was expected.
Change-Id: I38d51eeafab04ece83e4bb87bfaa967506f97b11