According to TS 44.008 Section 3.2.1.31, the "Layer 3 Message Contents"
IE of the BSSMAP Cipher Mode Complete is optional. The BSC may hence
inlcude that IE or not include it.
Without this patch, OsmoMSC is crashing if that IE was missing:
<000a> a_iface_bssap.c:699 Rx BSC DT: 00 03 55 2c 02
<000a> a_iface_bssap.c:629 Rx MSC DT1 BSSMAP CIPHER MODE COMPLETE
<001f> a_iface_bssap.c:91 Found A subscriber for conn_id 1
<000a> a_iface_bssap.c:415 BSC sends cipher mode complete (conn_id=1)
==5611== Invalid read of size 8
==5611== at 0x128D0F: msc_cipher_mode_compl (osmo_msc.c:159)
==5611== by 0x114F62: bssmap_rx_ciph_compl.isra.8 (a_iface_bssap.c:432)
==5611== by 0x113267: sccp_sap_up (a_iface.c:520)
Change-Id: I722f9b468b157b3736918f090daaa9489a6028ee
Closes: OS#2871
Even if we're not implementing CM re-establishment, we should give
the MS a clear indication that we don't do and follow the related
procedures of TS 24.008 by sending CM SERVICE REJECT.
Closes: OS#2869
Change-Id: I1c0473647295456fd635b8df6079ee48695dcf2e
Measurement reporting (and the relate feed) are functions of the BSC,
not the MSC. This code should never have been inherited from OsmoNITB
to OsmoMSC in the first place, let's remove it.
Change-Id: I0d57ac214e574e267fa9752daf76566197b9aa64
When we receive a CM Service Request, OsmoMSC should eventually verify
what kind of service it is the phone requests, and whether we support
that service.
Change-Id: I499730d760dc9ac7f599e09959c6eac4452f2eab
Closes: OS#2668
OsmoMSC rejects an Emergency Call with IMEI as mobile identity with
"semantically incorrect message" which is clearly wrong. According to TS
24.008 4.5.1.5 we should reject with cause 5 "IMEI not accepted"
Found with TTCN-3 test case MSC_Tests.TC_emerg_call_imei
Change-Id: I2f7ab0e32b914a112c0b17c523d149ccd0299099
Closes: #2866
MNCC has a MNCC_F_EMERGENCY flag to indicate that the mncc.emergency
field is present. However, OsmoMSC never sets this flag.
Change-Id: I0ebd8f88e483172988f4a0cb0636b4160688d8ad
Closes: OS#2865
An emergency call should be logged different from a normal call,
and we also increase the log level from INFO to NOTICE in such a
situation.
Change-Id: I83f3b8bd0aeda70f03aa7b8d264a9008d10d5687
There appears to have been no input validation whatsoever on MNCC
messages. Hence it was very easy for an external MNCC handler to
crash OsmoMSC, such as in OS#2853
Change-Id: Idaf3b8e409c84564b1eb26d01a19c605f89b14f4
Closes: OS#2853
Quote the argument to sqlite's datetime(). Otherwise, the timestamp
stored in the database reads back as a negative value for some reason.
Before:
1032 validity_timestamp = dbi_result_get_datetime(result, "valid_until");
(gdb) p validity_timestamp
$2 = -1516814654
After:
1032 validity_timestamp = dbi_result_get_datetime(result, "valid_until");
(gdb) p validity_timestamp
$2 = 1516814654
Change-Id: Icf786f9b1efabfe7407fb6414ec0d326d8f7244a
As the include file gsm_data.h is generic (does not depend on osmo-iuh0s
iu_client.h), rab_assign_addr_enc is declared as "int" instead of "enum ranap_nsap_addr_enc".
osmo-msc/src/libmsc/msc_vty.c: In function ‘msc_vty_init’:
osmo-msc/src/libmsc/msc_vty.c:212:30: warning: passing argument 2 of ‘ranap_iu_vty_init’ from incompatible pointer type [-Wincompatible-pointer-types]
ranap_iu_vty_init(MSC_NODE, &msc_network->iu.rab_assign_addr_enc);
^
Change-Id: I1b63ee350911bdf772a2324fff55035275a455c4
Compute a validity timestamp based on SMS validity time.
Store the computed value in the database and recompute the validity
time when an SMS is read from the database.
Change-Id: Id27c250d3a64cd109416450e8ca155b18a8b9568
Currently the SMS database keeps accumulating entries for each SMS.
These entries are never deleted automatically. With this change, we
start deleting SMS which have successfully been sent to subscriber B.
Change-Id: I3749855fe25d9d4e37ec96b0c2bffbc692b66a78
If we cannot open a connection to the sqlite3 database, show the name of the
database we failed to access, and also hint at the fact that a likely reason
for the problem is a missing sqlite3 driver for libdbi.
Change-Id: If1c0026e882984b4358ce116ec4a7ad40340517c
There is no any significant reason to define static function
'send_own_number' after the code that calls it.
Change-Id: I7f76f278c09489dccd96921610e8d06efa679ff2
* move log helpers to generic header
* log subscriber update
It's handy for troubleshooting issues with subscriber update via GSUP
from HLR.
Change-Id: I1958aeeb3ea99831c7e2c5ee9a6b59834baf4520
The expire_lu is never used but is printed for every subscriber. Let's
remove it to avoid confusion.
Change-Id: I6f7ad1670836384d1e6a58f47a13464fdbbf8509
This avoids potential licensing incompatibility and makes integration of
Debian packaging patches easier.
Related: OS#1694
Change-Id: I71cd631704a4dc155c6c752fee2a42cd6e2fa336
It's not clear cut which code is responsible for canceling pending requests,
since the requests list is kept in vlr_subscr, but sending out Paging does
certainly not belong in the VLR. Place the requests cleanup in gsm_04_08.c.
Add to test_ms_timeout_paging() in msc_vlr_test_ms_timeout.c to verify that a
pending paging is canceled on IMSI Detach.
Change-Id: Ib8874a9d92f02b0826525b55518332f6899688fd
Currently, if there is no reply from the BSS / RNC, a subscriber will remain as
"already paged" forever, and is never going to be paged again. Even on IMSI
Detach, the pending request will keep a ref count on the vlr_subscr.
Add a paging timeout, as gsm_network->paging_timeout and in the VTY on the
'msc' node as 'paging timeout (default|<1-65535>'. (There is a 'network' /
'T3113' in OsmoBSC, but to not confuse the two, give this a different name.)
Add test_ms_timeout_paging() test to verify the timeout works.
I hit this while testing Paging across multiple hNodeB, when a UE lost
connection to the hNodeB. I noticed that no matter how long I wait, no Paging
is sent out anymore, and found this embarrassing issue. Good grief...
The choice of 10 seconds is taken from https://osmocom.org/issues/2756
Change-Id: I2db6f1e2ad341cf9c2cc7a21ec2fca0bae5b2db5
These rx functions are only used for the A interface, hence the names should
not suggest general SCCP rx (which Iu also has).
Change-Id: I6815c3d4dea4c2abfdff1cf0239ada6a9254f351
Add LOGPBSCCONN for struct bsc_conn.
Use LOGPCONN or LOGPBSCCONN whereever possible.
Tweak a few log messages and remove one redundant log.
Change-Id: If9cb0e7a5cef2ec37a1a7c548aecf11a11c22eec
The target buffer in libsmpp is 16 bytes long, and snprintf() may omit the
terminating zero. There seems to be no handling for unterminated strings, so
osmo_strlcpy() is the safer (and presumably more optimal) choice.
Change-Id: I5845666201f945ea9f83da62f2dd4bec52eb74cf
In case of UMTS AKA, the Kc for ciphering must be derived from the 3G auth
tokens. tuple->vec.kc was calculated from the GSM algorithm and is not
necessarily a match for the UMTS AKA tokens.
So far we were always sending the Kc retrieved from osmo-hlr. If the 2G auth
algo is set to milenage, the 2G Kc coincides with the one derived from 3G
tokens, but if 2G is set to a different algorithm, the Kc received from the
osmo-hlr is not usable for ciphering when UMTS AKA was used for authentication
(on R99 capable GERAN and MS).
Implementation: To decide whether to use UMTS AKA derived Kc or the Kc from the
auth vector, use the umts_aka flag added to set_ciph_mode() in a previous
patch. Use osmo_auth_c3() to derive the GSM AKA Kc from the UMTS AKA CK and KI.
Related: OS#2745
Requires: I85a1d6ae95ad9e5ce9524ef7fc06414848afc2aa (libosmocore)
Change-Id: If04e405426c55a81341747a9b450a69188525d5c
In case of UMTS AKA, the Kc for ciphering must be derived from the 3G auth
tokens. tuple->vec.kc was calculated from the GSM algorithm and is not
necessarily a match for the UMTS AKA tokens.
To decide (in an upcoming patch) whether to use UMTS AKA derived Kc or the Kc
from the auth vector, the set_ciph_mode() from vlr_ops needs to know whether
UMTS AKA is being used. This could possibly derived from the msc_conn_ref, but
all flags are already available in the vlr_lu_fsm and vlr_access_req_fsm. Hence
add a umts_aka flag to the set_ciph_mode() callback invocation. The VLR FSMs
thus decide whether UMTS AKA or GSM AKA is to be used during Ciphering Mode
Command, which makes more sense than re-implementing the same decision process
in the MSC.
I considered placing the Kc derivation in vlr_set_ciph_mode() and only tell the
MSC's set_ciph_mode() implementation the precise keys it should use, but the
RAN particulars, and whether a Kc is used at all, rather belong with the MSC.
Related: OS#2745
Prepares: If04e405426c55a81341747a9b450a69188525d5c
Change-Id: I983c48347faf4ee1b405d8174b4e006c904157cf
During Set Ciphering Mode on GERAN, it is required to know whether UMTS AKA is
used to decide which Kc to pick. Change static function is_umts_auth() into
public vlr_use_umts_aka(), so future patches can re-use it.
Prepares: If04e405426c55a81341747a9b450a69188525d5c
Change-Id: I85d784c62ecbabdb6186a3dae4dcd554e7921041
a_iface_tx_cipher_mode() is a bit too far away from the VLR to be handling its
ciphering enums. Instead, construct the gsm0808_encrypt_info in the
msc_vlr_set_ciph_mode() callback.
Greatly simplify the sanity checking code: a_iface_tx_cipher_mode() no longer
needs to re-verify the presence of the gsm0808_encrypt_info contents.
Change-Id: Id46f9a513b555d0a481f7124c9984c2b5b196b3e
The bit shifting is performed in gsm0808_enc_encrypt_info(), and must not be
done when populating the gsm0808_encrypt_info struct.
Provide vlr_ciph_to_gsm0808_alg_id() to translate the enum vlr_ciph to the
GSM0808_* constants we need to put in the gsm0808_encrypt_info struct instead.
Related: OS#2745
Change-Id: If75f95e8a5cc8b9979610ce6d746c1f0073ee39a
When the subscriber has no MSISDN, we might construct an invalid SQL statement
such as
... AND dest_addr= AND ...
Instead, don't even query for empty MSISDNs.
Related: OS#2706
Change-Id: I7d6169d774b2da04b3051957e364fe620feed51e
The commandline option -m has already been deprecated before the
split. Use the split as an opportunity to get rid of this option.
Change-Id: Ie23d492a839aae85470e39b0d0ad8f57b0d38f7e
The log output of the reset FSM duplicates lots of the built in
FSM log output.
Remove duplicate logging, use more expressive log messages where
needed.
Change-Id: Ie031d947a5b8097bd656c0271081af215605ba02
Adjust test expectations accordingly.
The error was:
==16084==ERROR: AddressSanitizer: heap-use-after-free on address 0x61500000f5f4 at pc 0x561be639ac2b bp 0x7ffc0aabbe40 sp 0x7ffc0aabbe38
READ of size 4 at 0x61500000f5f4 thread T0
#0 0x561be639ac2a in _msc_subscr_conn_put ../../../../src/osmo-msc/src/libmsc/osmo_msc.c:384
#1 0x561be636070b in rx_from_ms ../../../../src/osmo-msc/tests/msc_vlr/msc_vlr_tests.c:204
#2 0x561be6360b21 in ms_sends_msg ../../../../src/osmo-msc/tests/msc_vlr/msc_vlr_tests.c:217
#3 0x561be635b40a in test_call_mt ../../../../src/osmo-msc/tests/msc_vlr/msc_vlr_test_call.c:328
#4 0x561be6363bb7 in run_tests ../../../../src/osmo-msc/tests/msc_vlr/msc_vlr_tests.c:802
#5 0x561be63524ea in main ../../../../src/osmo-msc/tests/msc_vlr/msc_vlr_tests.c:849
#6 0x7f6eebb3e2b0 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x202b0)
#7 0x561be6352fb9 in _start (/n/s/osmo/make-3G/osmo-msc/tests/msc_vlr/msc_vlr_test_call+0xdafb9)
Related: OS#2672
Change-Id: If0659a878deb383ed0300217e2c41c8c79b2b6a5
If a conn is attempted to be used when in release, log an error, but don't skip
tracking.
No current code path apparently hits this, according to msc_vlr_tests. Just
making sure that we will prominently see such errors when we introduce any.
Change-Id: I8dd20ee56ce5ad7a90fcd03a06604c383e5eed54
When hunting a conn use count bug, it was very hard to figure out who's (not)
using the conn. To ease tracking down this bug and future bugs, explicitly name
what a conn is being reserved for, and track in a bit mask.
Show in the DREF logs what uses and un-uses a conn. See the test expectation
updates, which nicely show how that clarifies the state of the conn in the
logs.
On errors, log them, but don't fail hard: if one conn use/un-use fails, we
don't want to crash the entire MSC before we have to.
Change-Id: I259aa0eec41efebb4c8221275219433eafaa549b
We usually have both A and IuCS on 0.23.1, using differing SSNs.
0.23.2 was used only if there was a separate cs7 instance for Iu, which is not
practical, and even if used does not conflict with 0.23.1 (since it would be on
a different STP).
Just use 0.23.1 for all SCCP clients.
This needs adjustment of
https://osmocom.org/projects/cellular-infrastructure/wiki/Point_Codes
Change-Id: I3d5466eff5680cb5aa95a76a9e179fdf88ce8aa0
The BSC rate counters are a leftover from the nitb split.
Accessing them would result into a null-pointer exception,
because the struct isn't initialized.
Change-Id: I8c72ab8bf781d3f9a436eb1a27ac4d13df5e656b
Terminating one of the FSM instances may effect termination and deallocation of
the others, as well as the vlr_subscr itself. So, reserve the vlr_subscr
locally, and then dispatch events to exactly those FSM instances that exist.
The changes in expected output in the msc_vlr_tests shows that the subscriber
was deallocated from the first FSM termination, and now sticks around until
we've checked both FSMs are gone.
Change-Id: I56551ecc10f5295fe75944bdde4b583b1b621811
If dispatching a conn timeout, the conn fsm will already have been discarded,
and we cannot fire any more events to it.
The expected test output changes illustrate that we are now omitting event
dispatches that happen *after* the same FSM was already deallocated.
Change-Id: I25af3e5a1b04e3a5c9f41956cbcbbdd8439c6457
osmo_gsup_decode() doesn't actually decode everything, it does leave quite a
number of pointers into the original msgb. Hence we must not deallocate the
gsup msgb before dispatching GSUP events.
Move msgb_free() to the bottom of vlr_gsupc_read_cb() and use rc and gotos to
early-exit if needed.
Change-Id: I16fc92dcf84e29fcf34712a2e8b0464ef08425ad
When sub_pres_vlr_fsm_start() is called, it dispatches an event which may in
some cases already cause tear down and free of the parent FSM instance, after
which storing the returned instance pointer in that parent's metadata will use
freed memory. Instead, pass the target pointer to remember the instance at to
sub_pres_vlr_fsm_start() and assign the pointer *before* firing the event.
Explain so in a new comment.
I haven't checked whether that pointer is actually used at all -- this is the
easiest way to fix the use-after-free without getting sucked into semantic
questions.
Change-Id: Ibdc0b64cd12ba3e2b9737e3517d8484e67abcf04
The log message after the nullpointer check for conn tricks Coverity
Scan into detecting a nullpointer deref.
Include the log message into else branch to state the program flow
more clearly
Fixes: Coverity CID#178656
Change-Id: If6e962f4033c955ecd3539a719031a83c9b6205a
The reset context contains a string buffer to allow for setting
a human readable name, that is then displayed in the logs. Since
OSMO-FSMs already have such a feature there is no need for an
extra name variable.
Use LOGPFSML and the name parameter of osmo_fsm_inst_alloc()
to display the name of the FSM
Fixes: Coverity CID#178664
Change-Id: I5b051606791c5e085ca6bb1be20592127d48ceb5
Wen there's no SMPP support compiled in, and routing was successful,
we shouldn't return an uninitialized value.
Change-Id: I4abbbb5ab336a7e8da08d682f396baec3b56fa3a
Fixes: Coverity CID#174176
vty_install_default() and install_default() will soon be deprecated.
Depends: I5021c64a787b63314e0f2f1cba0b8fc7bff4f09b
Change-Id: I34708c73d8084db4e6c83a39be8fdaeaa492d743
When using ciphering, the TMSI is an important part of the ciphering. To guard
against users forgetting to set 'assign tmsi' in the config and compromising
their ciphering unknowingly, the default should be to use a TMSI.
To optimize in an unencrypted network, 'no assign tmsi' config can still switch
off TMSI use.
Change-Id: If115e95bebc314bedb50faf3993b52071fee5c1e
The name auth_tuple_max_use_count suggests that if I want to use each auth
tuple exactly once, I need to set it to 1. Curiously, so far you need to set
to intended uses - 1.
Reflect this in its name by renaming to auth_tuple_max_reuse_count.
I first considered to not rename but change the if-conditions so that == 1
means each tuple is used once, and upon struct vlr allocation, set the default
to 1. That would also logically entail that setting to 0 means to re-use
vectors infinitely often, like now a value < 0 does. That means, when
allocating a vlr struct zeroed out, we would by default have the most
dangerous/unsafe configuration. It's no problem to set a default to 1 upon
allocation, but by renaming the variable instead, we get safer alloc-zero
behavior and don't need to change any conditionals in the code (even though the
patch ends up considerably larger from all the renaming).
Change-Id: I0b036cae1536d5d6fb2304f837ed1a6c3713be55
libmsc/a_iface.c and libmsc/a_iface_bssap.c still include
osmocom/sccp/sccp_types.h to get access to enums defining SCCP
cause values. Until that is resolved, we have to keep the build
dependency to libosmo-sccp-dev
Change-Id: I957dcb2bcce216d0fd81a58bfe869aca0e4624a8
Related: OS#2601
osmo-msc doesn't use any API/symbols of libasn1c directlry. Rather,
we use libosmo-ranap which in turn uses libasn1c. Let the linker
work out that dependency.
This fixes the following dpkg-shlibdeps warning:
Change-Id: I2f840884d8f1cc542de1e26acd3d4215bd2fd899
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/osmo-msc/usr/bin/osmo-msc was not linked against libasn1c.so.0 (it uses none of the library's symbols)
A FSM doesn't need "FSM" in its name, as it is obvious that it is a
FSM. Also, having two that are called RESET is confusing, so let's
try to come up with better names.
Also, after Change-Id I9ef59432f43a3cdb94e4cbb0c44ac3f9b2aac0f2 in
libosmocore, we now enforce that no FSM identifiers contain spaces
or other illegal characters.
Closes: OS#2593
Change-Id: I858a81b8a4e01b2e802e3159f2835e5ca515953d
Currently, OSMO_ASSERT() is defined such that it ends in a semicolon, hence an
added ';' is redundant. However, the usual way this kind of macro should be
defined is
#define OSMO_ASSERT(x) do { ... } while(0)
so that the compiler requires a trailing semicolon.
To prepare for such a change possibly coming up in libosmocore, add ';' to all
OSMO_ASSERT() users.
Change-Id: Ic79c8b8f98a7f3bef761751d55a7e6125cf2c46d
In vlr_core.h, "pre-declare" a struct used in function declaration.
In vlr_lu_fsm.c, gsup.h is not used, drop the #include.
Change-Id: I61d793c3001abbe6d381be1ae0bb350b07403e88
Add required msgb_free() to vlr_gsupc_read_cb().
Adjust msc_vlr_tests.c gsup_rx() to *not* free the msgb again after
vlr_gsupc_read_cb() did.
Related: OS#2476
Change-Id: I347c53f57a7fa79921aed3f6e42599841acf27c0
Since Ifb8f3fc2b399662a9dbba174e942352a1a21df3f libosmo-mgcp-client has its own
definitions in mgcp_common.h, which conflict with legacy_mgcp/mgcp.h. This
cross-inclusion to support libosmo-mgcp-client is no longer necessary.
In the future, including libosmo-mgcp-client together with libosmo-mgcp will be
made possible, but not with libosmo-legacy-mgcp (because we don't care enough).
That is why including libosmo-legacy-mgcp headers would cause build failure.
Depends: Ifb8f3fc2b399662a9dbba174e942352a1a21df3f
Change-Id: I8e3359bedf973077c0a038aa04f5371a00c48fa0
The MSC should not fiddle with low-level SI details like rest octets
anyway. Unfortunately simply removing the header is impossible as it
causes massive fallout due to missing includes. Fixed it as well.
The only other parameter which required removal is cell_ro_sel_par which
is not referenced anywhere in the code anyway.
Change-Id: Ibff77330de056fad4288cd4c48d016aad8105354
I would have liked to add a regression test to verify this, but currently there
is no easy way to run CTRL tests and at the same time have access to the
osmo-msc in a way that simulates an attached subscriber.
Related: OS#2285
Change-Id: I003542b208ecf3713e9e67712d84ccb4c61af14e
After osmo-mgw changes I8e0b2d2a399b77086a36606f5e427271c6242df1 and
I99f7faab637cfcc22ece64a1dbcbe590f2042187, apply linking of new
libosmo-mgcp-client and renames to drop the "gw" from mgcp_client_*.
Also rename the gsm_network.mgcpgw to mgw, to indicate that the MGCP client is
used to contact the MGW (Media Gateway).
Depends: I8e0b2d2a399b77086a36606f5e427271c6242df1 (osmo-mgw)
I99f7faab637cfcc22ece64a1dbcbe590f2042187 (osmo-mgw)
Change-Id: I093ad02ca0e532f659447c785e09678b3e6f220d
The function gsm0408_dispatch() accepts a message buffer pointer
and accesses the l3h pointer. Even in a properly allocated
message buffer, this may lead into a segfault if the user forgets
to set the l3h pointer. This commit adds assertions to popup a
more expressive error message.
Change-Id: I43bd9bd1c170559aaa8dacaef25dba090744bcd5
Rewire build and includes to libosmo-legacy-mgcp.
Drop osmo-bsc_mgcp and related python tests, now found in osmo-mgw.git.
libosmo-legacy-mgcp is installed from osmo-mgw, hence add the dependency to
jenkins.sh (so far using the pre_release branch).
Change-Id: Ic99d681759edce11564da62500c2aac5cf5fffe2
Remove libiu here, use the functions from libosmo-ranap instead, by applying
the ranap_ / RANAP_ prefix.
Corresponding change-id in osmo-iuh.git is I6a3f7ad15be03fb94689b4af6ccfa828c25f45c0
To be able to run the msc_vlr tests for RAN_UTRAN_IU without Iu client headers
available, add iu_dummy.h, containing mere function signatures that match
iu_dummy.c and a mostly empty struct ranap_ue_conn_ctx.
Make sure we can build with and without --enable-iu: include osmo-iuh headers
only with --enable-iu.
Change-Id: Ib8c4fcdb4766c5e575618b95ce16dce51063206b
Currently the force_realloc feature is turnd on and of in a
hardcoded way. This patch makes the option available via VTY.
Change-Id: Ic8740512c5ea0766ff6ceb1c28b9c2b3fe46e75f
This was originally a long series of commits converging to the final result
seen in this patch. It does not make much sense to review the smaller steps'
trial and error, we need to review this entire change as a whole.
Implement AoIP in osmo-msc and osmo-bsc.
Change over to the new libosmo-sigtran API with support for proper
SCCP/M3UA/SCTP stacking, as mandated by 3GPP specifications for the IuCS and
IuPS interfaces.
From here on, a separate osmo-stp process is required for SCCP routing between
OsmoBSC / OsmoHNBGW <-> OsmoMSC / OsmoSGSN
jenkins.sh: build from libosmo-sccp and osmo-iuh master branches now for new
M3UA SIGTRAN.
Patch-by: pmaier, nhofmeyr, laforge
Change-Id: I5ae4e05ee7c57cad341ea5e86af37c1f6b0ffa77
When somebody kills the process, it's best to handle the signal
and to use the opportunity for some cleanup. We always did this
in the NITB on SIGINT, but never on SIGTERM. Let's change it.
Change-Id: Iea6804325a6575ceab5edfd28dd20249462f143b
This option was present in very early versions of the NITB, but
at least since 2011 it is no longer supported. It's still listed
in --help output, which is wrong.
Change-Id: I1d2cceb588ec5fb34ec5e2c05a7d8c93310bee88
Set the time on the status report to the time the message was delivered, as
this may not be the same as the time when we are delivering the report to the
originating MS.
Change-Id: I9056429d40bf02731f004b7833f1de45a0d1add8
libsmpp34 already converts received TLV integer values to native
endianess in libsmpp34_(un)pack.
Converting them again at receive time swaps the 2 bytes of
user_message_reference, then using a wrong value. As GSM03.40 spec
uses only 1 byte for the id, then only the high byte of the initial
value is used and eventually sent back to the ESME. Again, at that time,
htons() is not needed because libsmpp34 already handles that part.
See OS-#2429 for more details.
Change-Id: If748548a4a223e529a1110c89e483b599b406e8b
I already stumbled into 2 compilation environments which had Werror
enabled for -Wmaybe-uninitialized and the build failed, so let's
workaround this warning.
| smpp_openbsc.c: In function 'handle_smpp_submit':
| smpp_openbsc.c:216:9: error: 'sms_msg_len' may be used uninitialized in this function [-Werror=maybe-uninitialized]
| memcpy(sms->user_data, sms_msg, sms_msg_len);
| ^
| smpp_openbsc.c💯15: note: 'sms_msg_len' was declared here
| unsigned int sms_msg_len;
| ^
| cc1: some warnings being treated as errors
Change-Id: I0901ddadb5f72e1585cb1797ac22c8ab95e83146
gsm_04_11.c sms_report_alloc()
Use the sms->text, not the sms->user_data to construct the report body.
This also prevents the potential output of non printable characters to
the log and or vty.
Change-Id: Id51bc9483ad6f52d6da74135605cfd12434c7c96
gsm_04_11.c: gsm340_gen_sms_status_report_tpdu()
When we construct the status report PDU, use sms->src
instead of sms->dst as the destination address
This way we tell the MS that the message was delivered
to the destination and not to itself.
This is relevant for phones that display a textual
representation of the delivery report.
Change-Id: I2d4f87ac777465de9bfb5a775a789a2691755ee9
Use new definitions in libsmpp34 to set the registered_delivery field
accordingly, as provided by I5b3afff1b3b77cccd949e0606914c7ac3ba6114c.
Moreover, do not set this header field to zero if status reports are
off, the deliver_t structure has been already zeroed so this not
required.
Change-Id: Ie78e17323796120f576b9c0e1bc5ccc32da8ee12
In 2015, Jacob moved/copied related functions to libosmocore, but
for some reason didn't remove the copies here. Let's follow-up on
that and remove duplicated code.
The libosmocore commit introducing osmo_apn_to_str() was
8114294bf29ac6e44822c0ae43d4b0819f11b022
Change-Id: I7315ffcbed8a54cca2056f313bb7783ad82d0ee9
We can only print libgtp pdp information if a library context is
attached to this pdp context. This is not always the case,
particuarly during some teardown scenarios.
Change-Id: Ia3184877f9709db65f5f93a98403f2ef5b04a8ca
When converting from GSM_PCHAN_PDCH, we should generate
a RSL channel number IE with the osmocom extension
RSL_CHAN_OSMO_PDCH rather than claiming it is a regular
TCH/F channel.
This is important as this function is used by
osmo-bts, too - and it decides which channel number IE is
put in the GSMTAP header for both GSMTAP tracing as well
as the GSMTAP based osmo-bts-virtual.
In order to avoid any unintended effect on libbsc,
we make sure to modify rsl_ipacc_pdch_activate() to
always use GSM_PCHAN_TCH_F in related RSL message.
Change-Id: Ie34219e64a6d89da4a79f2db8ec73d1909fb8280
In the PDP Context Create from SGSN to GGSN, we include information
about the RAN type (GERAN/UTRAN) and the Cell of the MS. This was
all hard-coded to GERAN, and wasn't updated when we added UTRAN
support to the SGSN.
Change-Id: I6c79e42c5e08b28fe8182555302a5505fbbaa313
Commit 5754206379 introduced
OSMUX_STATE_NEGOTIATING to fix a race condition present in osmo-bsc_nat.
However, after this change osmo-bsc_mgcp cannot switch to
OSMUX_STATE_ACTIVATING anymore, which means during osmux_send_dummy time
it won't call osmux_enable_endpoint(), which in turn won't set endp type
to MGCP_OSMUX_BSC.
If MGCP_OSMUX_BSC is not set, uplink streams are sent using regular RTP
instead of Osmux not matter it is enabled in config or not.
Change-Id: Ibcb59aa1ca25408f82cc88c2d5b81177b5f276dc
In case of successful completion of handover gsm_subscriber_connection could be moved from one bts to another,
so connection link to bts should be replaced by link to bts, which owns new_lchan.
This bug was detected, because conn->bts->nr is used in call control log messages
and wrong number of bts was observed in these messages after handover.
Change-Id: Idc7dd412b7580c451e716b73ef7549826c60b0d9
Fixes regression probably introduced in c696cc28.
For bts>0 logging doesn't show bts number correctly when printing lchan
identification string - it will always show it as "bts=0". The reason for
this is that the identification string is cached before bts->nr value is
set to a proper value.
This patch sets bts->nr as part of the first step of the bts structure
initialization, before caching happens thus making sure the cached
identification string is cached with the correct values.
Change-Id: I61c18a7f021fcb1ec00d34a745f4e3ab03416c2d
Replace magic numbers by esm_class definitions, which
have been added to latest libsmpp34 in Change-Id
I91afd8b462b8fd3b2c4c5b54f4eeb7ec5b730b65
Change-Id: I6c458690da60c8f3637680efbd718f6e8c6feb4c
submit_to_sms() now handles two TLVs, so find_tlv() is suboptiomal and
it can be removed, since it would result in two passes on the TLV list.
Use new smpp34_tlv_for_each() helper to iterate over the list of TLVs
that is available since I446929feed049d0411e1629ca263e2bc41f714cc.
Change-Id: I53a65164a6cc4abc6bf57d9a8dc275cf21c90222
The change-id I7276d356d805a83ebeec72b02c8563b7135ea0b6 added msg_ref to
the databse but forgot to remove the comment stating it's not being
stored.
Change-Id: I204f098c8f2a480405446113e2181b2c53700cf3
gsm340_gen_oa() returns a negative value if the output buffer that the
caller passes is too small, so we have to check the return value of this
function.
Fixes: CID 174178
Fixes: CID 174179
Change-Id: I47215d7d89771730a7f84efa8aeeb187a0911fdb
This patch adds gsm340_sms_send_status_report_tpdu() to build a
status-report. Moreover, set sms->report field if we see a SMPP
SUBMIT_SM with Delivery Acknowledgment esm_class, so this identifies
that this is a delivery report.
MS GSM 03.40 SMSC SMPP 3.4 ESME
| | |
| | SUBMIT-SM |
| | esm_class = Delivery Ack |
| |<-------------------------------|
| | SUBMIT-SM-RESP |
| |------------------------------->|
| | |
| SMS-STATUS-REPORT | |
|<----------------------------| |
| GSM 04.11 RP-ACK | |
|---------------------------->| |
| | |
There is a FIXME message in this patch, that I just copied from
gsm340_gen_sms_deliver_tpdu() since TP-MMS is not supported by OpenBSC.
Change-Id: Ib70e534840308ed315f7add440351e649de3f907
Simple patch to test the new status-report support code, remove previous
code before Delivery Acknowledgement support was in place. Use
LOGL_DEBUG for logging messages here as suggested by Neels and Harald.
Change-Id: I877e228d8e174430f700631edbf9955972da7892
SMPP DELIVER_SM messages with esm_class = Delivery Receipt need to send
this message reference (that the mobile phone allocates) to the ESME.
Thus, the ESME propagates it via SUBMIT_SM with esm_class = Delivery
Acknoledgment so that the SMSC sends the GSM 03.40 status-report to the
origin including this. Given this field is useful for status-reports, we
need to store it in the HLR database.
Moreover, we need a new field that specifies if the entry represents a
SMS status-report, to do the right handling from the gsm411_send_sms() -
such new handling comes in a follow up patch entitled "libmsc: handle
delivery ack via SMPP SUBMIT SM / send GSM 03.40 status report".
This patch includes the migration routines to the new database schema
revision 5, it's quite a bit of dbi boilerplate code - copied-pasted and
adapted.
Change-Id: I7276d356d805a83ebeec72b02c8563b7135ea0b6
If the mobile phone requests a status report via SMS, send a DELIVER_SM
with esm_class = Delivery Receipt to ESME to indicate that the SMS has
been already delivered to its destination.
MS GSM 03.40 SMSC SMPP 3.4 ESME
| | |
| SMS-DELIVER | |
|<----------------------------| |
| GSM 04.11 RP-ACK | |
|---------------------------->| |
| | DELIVER-SM |
| | esm_class = Delivery Receipt |
| |------------------------------->|
| | DELIVER-SM-RESP |
| |<-------------------------------|
| | |
This patch implements "Appendix B. Delivery Receipt Format" as specified
in the SMPP 3.4 specs. This string is conveyed in the SMS message as
data, and it is only meaningful to the ESME, for logging purposes. The
"submit date" and "done date" are not yet set, and other fields are just
sent with dummy values, so they are left to be finished as future work.
The new SMPP TLV tag TLVID_user_message_reference is added to the SMPP
messages inconditionally now since this information is required by
delivery-reports to associate the status-report with the original SMS.
Change-Id: Ic1a9023074bfa938099377980b6aff9b262fab2a
Just munch and log SMPP delivery receipts by now, don't mirror this, it
is going to break things in openbsc.
Follow up patch removes this and mirrors this SMPP message as a
SUBMIT_SM with esm_class = Delivery Acknowledgement.
Change-Id: I78e93bc4034679e238c8642ccf6a0e844b1d6d8b
Propagate the status report request field to the SMPP message through
the registered_delivery field, so the ESME knows that the mobile phone
is asking for explicit delivery acknowledgment is required. See SMPP 3.4
specs section 5.2.17.
Change-Id: I59af60fa89cd10ae973c5e122789e3e03e3728ee
Rationale: allows seeing all timer defaults at once by doing
OsmoBSC(config-net)# timer ?
Before, defaults are visible only by doing on each timer:
OsmoBSC(config-net)# timer t1234 <tab>
Change-Id: I8259234e5c62e058dde56d531071440bbab11462
The VTY parsing already ensures the parameter range being 1..65535, no need to
check the range again.
Change-Id: I1cffa5b01cd5c589f1e42998e32135f1da8c960b
Move the sms message-type-identifier (mti) handling away from the
routing logic. This patch allows us to reuse the sms_route_mt_sms()
function in a follow up patch for sms reports send through SMPP
DELIVER_SM with esm_class = Delivery Receipt whose Change-Id is
Ic1a9023074bfa938099377980b6aff9b262fab2a.
Change-Id: I3f3d30e0762b91e2099243b0be1a4b67cbb5e9c0
No need to cache the sms object, just cache what we need into the
smpp_cmd structure. This simplifies what that I introduced in
93ffbd0029 ("libmsc: send RP-ACK to MS after ESME sends SMPP
DELIVER-SM-RESP").
Change-Id: Iba5f864f9bb963baff95969e306b1b7cff00c1e3
The following branch:
if (!rc && !gsms->receiver)
rc = GSM411_RP_CAUSE_MO_NUM_UNASSIGNED;
at the end of sms_route_mt_sms() always evaluates false.
Just a bit before, in such function, we have this:
if (!gsms->receiver) {
...
#ifdef BUILD_SMPP
...
#else
...
#endif
return rc;
}
So, if there is no receiver, we just stop running code and return the RP
cause via the rc variable. Same applies to the smpp_first check under
the BUILD_SMPP ifdef (that I have removed in this snippet to keep this
commit message small).
Change-Id: Ic3502b5b169bc7a73a67fd6ff53d8b6c0dc045c8
libgtp is calling gtpie_tv2 which will convert this uint16_t from host
to network order. So far libosmogsm and the sgsn treated the charging
characteristics as opaque data. So when moving from byte array to the
uint16_t do the swapping.
Change-Id: I977aec2e2f8d57802e45f591754e5733562d5c2a
We no longer permit timers with a 0 value, so this case can never
happen. Also, if it should happen, I'd rather have a timter expiring
immediately (and breaking something) than not being started in the
first place.
Change-Id: Ibfcdd3ddc0155caee89c501498329bde247621a0
It typically doesn't make sense to configure any of the GSM RR timer
to 0 (Seconds). In fact, accidentially configuring any of the timers
to zero might have severe side effects, such as "stuck channels"
described in https://osmocom.org/issues/2380
Change-Id: I517828f2f0c80ec01cb63648db2626f17a67fe57
A number of the GSM timers (including T3109) had no reasonable
default values if not specified in the VTY / config file. Together
with unconditional writing to the config file, this created
config files with a persistent setting for important timers as '0'.
To make things worse, many of our example cofig files suffered from the
same problem.
Let's avoid this from happening by
* having reasonable defaults if nothing specified in the config file
* conditionally savingg timers only if they differ from default
* reject any timer values that state zero during start-up (see previous
commit)
Change-Id: Iaac0bfca423852b61d8b9eb1438157ef00d0d8c8
Closes: OS#2380
Using this new command (introduced in OsmoBSC + OsmoNITB), you can
simulate the generation of TRAP events for testin purposes.
start the control interface monitor as an example client program:
./openbsc/contrib/bsc_control.py -m -d localhost -p 4249
then start OsmoBSC or OsmoNITB, telnet to the VTY and enter 'enable'
mode and issue the following (example) command:
ctrl-interface generate-trap my.foo.var 2342
As a result, on the bsc_control.py you will see:
Got message: TRAP 0 my.foo.var 2342
Change-Id: Ib1d2ec38290dc94797c1b365d9b733e5215ab7d1
In case the counter group allocation fails, we must handle this
gracefully and fail the allocation of the parent object, too.
The recent change (Id I7dad4a4d52fe05f6b990359841b4408df5990e21) seems
to have missed one instance, so let's follow-up.
Change-Id: I1ee9e3d26dcc18e7f979fd9a786162cbcc50942c
Related: OS#2361
If we previously had a given SI present/active, we must send a
zero-length BCCH FILLING for that SI type to the BTS to stop it from
further transmitting this SI.
Change-Id: I33e356e2fa3a69efac9080813e3e9ef4e6438ed1
Closes: OS#2368
If we want to instruct the BTS to stop sending a given SI, we must be
able to send the respective BCCH INFO / SACCH FILLING with a header but
without any L3 data IE. This patch enables the related functions to do
this whenever their data argument points to NULL.
Change-Id: I88b85614951a108574f05db3b706884afe7e87a9
In commit 8b1a2f8cd7 we started to
initialize bts->si_valid to 0. This means we are skipping the manually
configured static system information.
Instead, we have to initialize bts->si_valid to bts->si_mode_static,
i.e. start with those that are static and not to be auto-generated.
Found while developing
http://git.osmocom.org/osmo-ttcn3-hacks/tree/sysinfo
Change-Id: Iab9cc93cf6d54560a72cc393cc3721a8d10e04bf
Closes: #2367
In case the counter group allocation fails, we must handle this
gracefully and fail the allocation of the parent object, too.
RelateD: OS#2361
Change-Id: I7dad4a4d52fe05f6b990359841b4408df5990e21