Drop extern definitions of talloc_msgb_ctx and use msgb_talloc_ctx_init()
instead.
In sgsn_test.c, use a local variable msgb_ctx to do the talloc report
from the return value of msgb_talloc_ctx_init().
Change-Id: I2f9ace855f0ecbdc9adf5d75bcb1a3d666570de4
After libosmocore 38d232ee5d2ceb045d9ad6d3a23afcb4972523f7 which outputs
'CTRL at <ip> <port>' from ctrl_interface_setup_dynip(), there's no need to log
the CTRL bind here anymore.
Change-Id: I1a874efe365a1ecf8ec37b058215b95b9a635ec2
After libosmocore 55dc2edc89c1a85187ef8aafc09f7d922383231f which outputs
'telnet at <ip> <port>' from telnet_init_dynif(), there's no need to log the
telnet VTY bind here anymore.
Change-Id: I97a730b28759df1d549a5049f47a3da1c16a3447
Introduce new configuration option bscs-config-file which includes BSC
configuration from the given file. Both absolute and relative (to the
main config file) paths are supported.
Add 'show bscs-config' command to display current BSC configuration.
Note: it is still possible to have BSC configuration in the main
file (provided proper index number is used) and in runtime but BSC
configuration is no longer saved automatically. The management of
included configuration file is left to external tools.
Update configuration examples.
Fixes: OS#1669
Sponsored-by: On-Waves ehf
Replace hardcoded protocol discriminator and message type bitmasks with
function calls recently introduced in libosmocore.
Note that the release 98 bitmasks slightly differ from the release 99 bitmasks.
This patch uses the "default" gsm48_hdr_msg_type invocation, thus it depends on
libosmocore whether 98 or 99 bitmasks are used.
In some places, use of the bitmask was erratic. Fix these implicitly by
employing the bitmask functions:
* silent_call.c: silent_call_reroute(): add missing bitmask for MM.
* bsc_msg_filter.c: bsc_msg_filter_initial(): RR vs. MM messages.
* osmo_bsc_filter.c: bsc_find_msc() and bsc_scan_bts_msg(): RR vs. MM
messages.
* bsc_nat_rewrite.c: bsc_nat_rewrite_msg(): SMS vs. CC messages.
* bsc_ussd.c: no bitmask is applicable for the message types used here.
* gb_proxy.c: gbproxy_imsi_acquisition(): missing bit mask for pdisc.
In gprs_gb_parse.c: gprs_gb_parse_dtap(), add a log notice for unexpected
message types.
Add ctrl_vty_init() calls and feed the ctrl_vty_get_bind_addr() return value to
ctrl_interface_setup() in the following programs:
osmo-bsc
osmo-bsc_nat
osmo-nitb
osmo-sgsn
For osmo-sgsn, move the control interface setup invocation below the config
parsing, so that the ctrl_vty_get_bind_addr() can return the configured
address.
Following the 'line vty'/'bind A.B.C.D' command added in libosmocore, use the
configured address to set the telnet bind for the VTY line. It is now possible
to publish the VTY on a specific local interface (including 0.0.0.0 aka "any").
Implement in all of:
osmo-gbproxy
osmo-gtphub
osmo-sgsn
osmo-bsc
osmo-bsc_nat
osmo-bsc_mgcp
osmo-nitb
In some of these main programs, move the telnet initialization below the
configuration parsing.
Historically, this was not a good idea for programs using bsc_init.c (aka
bsc_bootstrap_network()), since they expected a gsm_network struct pointer in
((struct telnet_connection*)vty->priv)->priv, so that telnet had to be either
initialized or replaced by a dummy struct. In the meantime, the gsm_network
struct is not actually looked up in a priv pointer but in the static bsc_vty.c
scope (bsc_gsmnet), so this limitation is mere legacy (even though said legacy
is still there in an "#if 0" chunk).
In the other binaries I have briefly looked at the init sequence dependencies
and found no reason to initialize telnet above the config file parsing. In any
case, I have tested every single one of abovementioned binaries to verify that
they still parse the example config successfully and launch, allowing VTY
connections on the configured address(es). I hope this suffices.
In all of the above, log VTY address and port. LOGL_INFO is disabled by default
in some of the logging scopes, and since it is a single log message right at
program launch, I decided for the slightly more aggressive LOGL_NOTICE.
Remove unused talloc.h from bsc_vty.c.
In bsc_nat.c, use OSMO_CTRL_PORT_BSC_NAT instead of hardcoding port number, and
include ctrl/ports.h for that.
Fix comment typo "COMAMND"
Add new kitchen sink openbsc/utils.h and libcommon/utils.c to make three so far
static functions public (so I can use them in the upcoming OAP code).
A place to put them could have been the gprs_utils.h, but all general functions
in there have a gprs_ prefix, and todo markings to move them away. All other
libcommon headers are too specific, so I opened up this kitchen sink header.
Replace the implementation of encode_big_endian() with a call to
osmo_store64be_ext(). See comments.
Apply the change in Makefiles and C files.
We don't need to consume all the entropy of the kernel but can
use libcrypto (OpenSSL) to generate random data. It is not clear
if we need to call RAND_load_file but I think we can assume that
our Unices have a /dev/urandom.
This takes less CPU time, provides good enough entropy (in theory)
and leaves some in the kernel entropy pool.
We are using the token to find the right bsc_config and
then we can use the last_rand of the bsc_connection to
calculate the expected result and try to compare it with
a time constant(???) memcmp.
Check if the NAT has sent 16 bytes of RAND and if a key
has been configured in the system and then generate a
result using milenage. The milenage res will be sent and
noth the four byte GSM SRES derivation.
Generate 16 byte of random data to be used for A3A8 by
the BSC in the response. We can't know which BSC it is
at this point and I don't want to send another message
once the token has been received so always send the data
with an undefined code. The old BSCs don't parse the
message and will happily ignore the RAND.
/dev/urandom can give short reads on Linux so loop
around it until the bytes have been read from the kernel.
Instead of doing open/read/close all the time, open the
FD in the beginning and keep it open. To scare me even
more I have seen /dev/urandom actually providing a short
read and then blocking but it seems to be the best way
to get the random byes we need for authentication.
So one should/could run the cheap random generator on
the system (e.g. haveged) or deal with the NAT process
to block.
Unfortunately the basic structure of the response is broken.
There is a two byte length followed by data. The concept of
a 'tag' happens to be the first byte of the data.
This means we want to write strlen of the token, then we
want to write the NUL and then we need to account for the
tag in front.
Introduce a flag if the new or old format should be used.
This will allow to have new BSCs talk to old NATs without
an additional change. In the long run we can clean that up.
In case the token was not correct, just close the connection.
It is not clear that forcing a new TCP connection is going to
give us any extra security here. But with the upcoming auth
handling it does make sense to have both case look similar.
Move the filter methods to the filter module. This is
still only usable for the NAT and the _dt/_cr filter
routines need to move back to the bsc_nat in the long
run.
On DT messages we directly write into the tracked SCCP
connection. This means "imsi" will always be NULL at
this check. Change the code to use con->imsi
Fixes: Coverity CID 1293151
I used strdup in case the data would not be valid from after
the call to getopt and this creates a potential leak if a user
is specifying multiple configuration files. If I depend on the
fact that the string is a pointer into the argv[] array I can
kill the strdup and fix the unlikely leak.
Fixes: Coverity CID 1206578
The code in the BSC/NAT called ipaccess_rcvmsg_base without
checking if the protocol is IPA. This lead the BSC to respond
to SCCP messages with an "ID ACK". From a quick look neither
the code of ipaccess_rcvmsg_base in OpenBSC nor the copy of
libosmo-abis ever checked the protocol header. So this code
has been wrong since initially being created in 2010.
Coverity complains about checking connection->cfg in
bsc_close_connection() at one place but not at the second.
This patch fixes this by adding a check before accessing cfg when
generating the 'partial message' log message.
Fixes: Coverity CID 1195180
Sponsored-by: On-Waves ehf
The log message lacked a lot of context. A SCCP connection is
created on behalf of a configured BSC. This way we should be
able to always list this information.
The old ipa_msg_recv() implementation didn't support partial receive,
so IPA connections got disconnected when this happened.
This patch adds the handling of the temporary message buffers and uses
ipa_msg_recv_buffered().
It has been successfully tested by jerlbeck with osmo-nitb and
osmo-bsc.
Ticket: OW#768
Sponsored-by: On-Waves ehf
In case of the RLSD coming from the MSC we are patching the address
in-situ but for local calls set con = NULL. We then answered the RLSD
with the wrong reference and the MSC kept on trying.
Assign a static name to a MSC Connection and use it. In case there
are multiple connections we can now more easily identify them.
This is only used for the NAT right now, the BSC could start to
name the various MSC connections too.
* It is a trie. The max depth of the trie is the length of the
longest prefix. The lookup is O(lookuped_prefix), but as the prefix
length is limited, the lookup time is constant.
* Each node can hold the entire prefix, has place for the rewrite
rule with up to three digits.
* A trie with 20k entries will take about 3MB ram.
* Filling the trie 100 times takes ~800ms on my i7 laptop
* 10.000.000 lookups take 315ms.. (for the same prefix).
* 93/99 lines are tested, 6/6 functions are tested, 49 of 54 branches
are tested. Only memory allocation failures are not covered
* A late addition is to handle the '+' sign and to increase the number
of chars in the rewrite prefix. The timing/line coverage has not
been updated after this change.
Coverity pointed out that this code is logically dead. Quickly
judging the code we will forward the RSLD message anyway. Remove
the code for now and next time I work on the NAT/USSD bridge I
will have a look at the flow of the RLSD messages.
Fixes: Coverity CID 1042327
Find the Cell Identifier from the Complete Layer3 Information and
store it for future reference. We could begin to verify that the
LAC/CI used really belongs to the BSC.
The name sccp_connection is used in the osmo-sccp code, sccp_connections
was used in the NAT for tracking a sccp_connection. Rename it so it is
obvious that the struct belongs to the nat.
The rename was done with sed:
$ sed -i s,"struct sccp_connections","struct nat_sccp_connection",g \
include/openbsc/*.h src/osmo-bsc_nat/* tests/*/*
Neels Hofmeyr
Harald Welte
Max