This patch adds GPRS specific functions for gsm_subscriber objects
(allocation, retrieval, deletion) and subscriber data
requests/updates. The sgsn_update_subscriber_data callback is used to
notify the sgsn about updates and is extended by a parameter that
passes a reference to a gsm_subscriber.
Sponsored-by: On-Waves ehf
Currently the keep_subscr flag in gsm_subscriber_group refers to a
whole group of subscribers which makes it difficult to really delete
single entries if the flag is set.
This patch adds a keep_in_ram field to gsm_subscriber which allows for
keeping subscriber objects in RAM while deleting others.
Note that really deleting an entry requires that both flags
(subscr_group->keep_subscr and subscr->keep_in_ram) are set to 0. So
only the latter should be used if a specification requires the
deletion of a subscriber entry.
Sponsored-by: On-Waves ehf
Currently every subcriber object directly refers to the gsm_network
which contains a flag shared by every related subscriber
(keep_subscr). This adds a dependency on gsm_network even if only the
function defined in gsm_subscriber_base.c are used.
This patch adds a new struct gsm_subscriber_group which contains the
keep_subscr flag and a back reference to the network object. The
latter is not dereferenced in gsm_subscriber_base.c, so it can safely
be set to NULL when only that part of the gsm_subscriber API is being
used. It also changes that API to use gsm_subscriber_group instead of
gsm_network parameters.
Since there are some places where a pointer to the gsm_network is
needed but where only a gsm_subscriber is available, a 'net' back
pointer is added to the group struct, too. Nevertheless subscr group
and network could be separated completely, but this is not the topic
of this commit.
Sponsored-by: On-Waves ehf
The commit "sgsn: Don't send XID reset after Detach Accept" fixed the
SGSN to not respond to a Detach Accept message when there is no MM
context.
This patch adds a test case to verify, that there is really no
message sent in that case.
The test fails when the commit mentioned aboved is reverted.
Sponsored-by: On-Waves ehf
Currently the expected P-TMSI generated by the SGSN is hard-coded
into the test. This adds a dependency on the implementation of rand()
and thus the libc used. This breaks the test e.g. on FreeBSD.
This patch modifies test_gmm_attach() to srand(1) first, generate the
P-TMSI, and finally srand(1) again before starting the test.
Sponsored-by: On-Waves ehf
Currently when the MS does a re-attach without doing a proper detach
first, the gbproxy uses the old local TLLI if patching and the keep
mode are enabled. This leads to a failing attachment procedure when
TLLI patching is also enabled.
This patch changes gbproxy_update_link_state_ul to reset all TLLIs
within the link_info if the message contains an unknown TLLI and an
MI. This is generally the case with Attach Request messages.
The gbproxy_get_link_info_ul gets an additional tlli_is_valid
output parameter that is set, when a TLLI was present and found.
This flag is then used instead of checking tlli.current == 0 to
set TLLI/P-TMSI e.g. Attach Requests when a link_info was already
present for the P-TMSI/IMSI used in such a request.
Ticket: OW#1324
Sponsored-by: On-Waves ehf
Increase the bcch_change_mark and generate a new copy of the
system information. Make the method public, add a small test
case. Manually verified using the FakeBTS. I don't know if
the MS will re-read these SIs.
Related: SYS#739
The session name must be present in a SDP file. The RFC proposes
to use a space for it but the other equipment is using the dash
so I have picked that as well.
RFC 4566:
The "s=" field is the textual session name. There MUST be one and
only one "s=" field per session description. The "s=" field MUST NOT
be empty and SHOULD contain ISO 10646 characters (but see also the
"a=charset" attribute). If a session has no meaningful name, the
alue "s= " SHOULD be used (i.e., a single space as the session
name).
Fixes: RT#2196
Currently the function in sgsn_auth.c either have an sgsn_config or
an sgsn_instance parameter. Since then global sgsn variable is
already being used in that file and since other parts of the SGSN
related code also rely on a global sgsn singleton, these parameters
pretend to provide a flexibility that is not really supported.
Therefore this patch removes these parameters except for the ACL
related functions, which do not call code that uses the sgsn
variable.
Sponsored-by: On-Waves ehf
Currently every time an RA Update Req or an Attach Req is processed, a
new P-TMSI is allocated. When an MS issues another of these messages
before it has completed the first procedure, old_ptmsi is replaced by
ptmsi (and thus lost) and ptmsi is replaced by the newly allocated
P-TMSI. This can confuse the gbproxy, which can loose track of the
logical link then. At least a Blackberry emits a double set of RA Upd
Req messages from time to time which may be just 20ms apart.
This patch adds a check whether mm->ptmsi or mm->old_ptmsi are set.
If both are set, the P-TMSI is not re-allocated. This is only the
case, when the Complete message has not been received yet, since that
message will reset old_ptmsi.
Sponsored-by: On-Waves ehf
Currently, the LLME is not cleaned up after sending an RA Update
Reject. This happens after entering a routing area from outside,
since in that case the SGSN sends an RA Update Reject (implicitly
detached) which causes the MS to restart the attach procedure.
The LLME is also not updated if an Attach Request with message errors
(encoding, invalid MI type) is received or if an MM context cannot be
allocated.
This patch changes gsm48_rx_gmm_ra_upd_req and gsm48_rx_gmm_att_req
to unassign the LLME or free the MM context (if available) after a
Reject message has been sent.
Ticket: OW#1324
Sponsored-by: On-Waves ehf
Currently the VTY 'auth-policy' command results in setting or clearing
the acl_enabled flag. This also enables the matching of the MCC/MNC
prefix of the IMSI.
This patch adds an additional policy 'acl-only' which disables the
MCC/MNC matching and relies on the ACL only.
Sponsored-by: On-Waves ehf
Currently the IMSI is only checked immediately when an Attach Request
is received that contains an IMSI IE. If it contains a P-TMSI
instead, access is always granted.
This commit moves the IMSI check to gsm48_gmm_authorize where it is
applied when IMSI and IMEI have been acquired. This fixes the
authorization when the Attach Accept doesn't contain an IMSI.
Sponsored-by: On-Waves ehf
Currently the GMM state is set to GMM-REGISTERED when an Attach
Accept or a RA Update Accept message is sent, even if a new P-TMSI is
included. In this case 04.08 requires (see 4.7.3.1.3 and 4.7.5.1.3),
that the state is set to GMM-COMMON-PROCEDURE-INITIATED when the
Accept is sent. When the Complete is received, the SGSN shall set
the state to GMM-REGISTERED.
This patch modifies the state updates accordingly.
Sponsored-by: On-Waves ehf
Currently libcommon depends on libbsc, because gsm_network_init
(libcommon/gsm_data.c) directly calls gsm_net_update_ctype
(libbsc/gsm_04_08_utils.c).
This patch moves gsm_network_init to a new file libbsc/net_init.c.
Sponsored-by: On-Waves ehf
This test checks the attach procedure until the Attach Complete is
received.
Note that authorization and GMM state updates are not working
properly yet.
Sponsored-by: On-Waves ehf
This replaces serveral occurences of duplicated code for message
creation and sending (passing to gsm0408_gprs_rcvmsg) into a single
function. In addition, the sgsn_tx_counter is always reset within
send_0408_message to simplify the code that checks for the number of
messages sent.
Sponsored-by: On-Waves ehf
Currently the LLME is not deleted when a GMM Status message is
received for which a mmctx cannot be found. This can fill the LLME
list with unneeded entries.
This patch adds code to unassign the LLME in that case.
Ticket: OW#1324
Sponsored-by: On-Waves ehf
Some switches do not like to receive the IPA PING/PONG messages.
Allow to disable the handling with "no timeout-ping" and create
test cases that verify the switching between the modes. Change the
code to trat <= 0 as an invalid timeout.
Fixes: SYS#713
Currently, when a Detach Request is received with an unknown TLLI,
it is answered by another Detach Request (!), even when a power_off
Type is used.
This patch uses gsm48_rx_gmm_det_req to handle the message instead.
So this function is changed to cope with a NULL mmctx. In that case
it doesn't unassign the llme, so this must be done manually
afterwards.
Sponsored-by: On-Waves ehf
Currently, every time the SGSN received a Detach Request from the MS
via an established logical link, it is answered by a Detach Accept.
This violates the specification (GSM 04.08, 4.7.4.1.2 and .3), which
states, that it should only be sent, if "the detach type IE value
indicates that the detach request has not been sent due to switching
off".
This patch adds a conditional to limit the sending of Detach Accept
accordingly.
Sponsored-by: On-Waves ehf
Currently only a Detach Request (MO) message with power_off = 0 is
checked.
This commit adds a new test case with power_off set to 1. It also
adds checks for the number of messages generated by the SGSN to
verify that these messages are handled differently.
Note that the handling of power_off isn't implemented yet. Therefore
the corresponding assertion is being disabled yet.
Sponsored-by: On-Waves ehf
Currently the ACL code is located in sgsn_vty.c.
This commit moves this to a new file sgsn_auth.c as a first step to
make authorization more flexible in order to implement remote
acquisition on subsciber data.
Sponsored-by: On-Waves ehf
Currently the P-TMSI IE in PAGING_PS is not patched.
This commit adds code to patch BSSGP P-TMSI IE in
gbproxy_patch_bssgp independently from the P-TMSI patching at the LLC
layer. It also extends gbproxy_update_link_state_dl to use the IMSI
to find the link_info if the TLLI is not present in the message.
Note that the spec (GSM 08.18, 7.2) requires to use of the P-TMSI
instead of the IMSI to select the MS if that IE is available.
Nevertheless as long as the IMSI is always present in downlink BSSGP
messages and as long as the optional P-TMSI refers to the same MS
(which is the case currently), this is not an issue.
Sponsored-by: On-Waves ehf
Currently, when P-TMSI patching is enabled, a new BSS P-TMSI is
generated for each Attach Accept. So two duplicated, subsequent
Attach Accept messages will be mapped to different BSS side P-TMSI.
Because the last one will replace former ones in the link_info
struct, the MS will fail to access the SGSN if it uses the former
P-TMSI to derive the new TLLI.
This patch checks the SGSN P-TMSI already assigned to the link_info
and only generates a new BSS P-TMSI on mismatch (or if the BSS P-TMSI
hasn't been set yet).
Ticket: OW#1322
Sponsored-by: On-Waves ehf
This adds a test case to check gbproxy's behaviour when processing
two subsequent but identical Attach Accept messages.
Ticket: OW#1322
Sponsored-by: On-Waves ehf
This patch adds assertions to check the LLC/GMM message received from
the gbproxy by the test framework within the function
test_gbproxy_keep_info.
It also fixes the source address of the DETACH ACC messages.
Sponsored-by: On-Waves ehf
Coverity complains about having side effects in OSMO_ASSERT argument
expressions. This would be an issue in this case, because that
variable is only reference in other OSMO_ASSERT expressions.
Nevertheless this patch changes this to assign the variable outside
of OSMO_ASSERT.
Fixes: Coverity CID 1244239
Sponsored-by: On-Waves ehf
Currently one regexp ('patching') is used for all matching.
This patch adds a second category 'routing' which is exclusively used
for SGSN selection. It also adds a corresponding VTY command:
- match-imsi patching RE : MS related patching (currently APN)
- match-imsi routing RE : Select secondary SGSN on match only
- no match-imsi : Clear all filter expressions
Ticket: OW#1258
Sponsored-by: On-Waves ehf
Currently, patch filter configurations are leaking between tests.
This adds a call to gbproxy_clear_patch_filter() to the end of each
test that calls gbproxy_set_patch_filter().
Sponsored-by: On-Waves ehf
The current implementation makes it difficult to add further match
expressions.
This patch adds a new struct gbproxy_match that contains the fields
needed for each match expression. The matches (config) and the
results (link_info) are stored in arrays. All related functions are
updated to use them. The old fields in the config structure are
removed.
Sponsored-by: On-Waves ehf
This patch adds assertions to check the LLC/GMM message received from
the gbproxy by the test framework within the function
test_gbproxy_ra_patching.
Sponsored-by: On-Waves ehf
Currently the only way to check, whether the right message have been
generated is to look into the generated text output. This is
error-prone if there are many messages.
This patch adds a way to optionally store all received messages into
a FIFO. They can then be checked by calling expect_msg() which
removes the first message from the FIFO and returns a pointer to it
or NULL if there is none. The pointer is only valid until the next
call to this function.
A few convenience functions are added to check for common message
types:
- expect_gmm_msg checks for certain GSM 04.08 messages in LLC/GMM
- expect_llc_msg checks for arbitrary LLC messages in BSSGP/UD
- expect_bssgp_msg checks for arbitrary BSSG messages
Each of their arguments can be set by MATCH_ANY to ignore it while
matching. On success, they return a pointer to a statically
allocated struct containing the pointer to the msg and the full parse
context.
Recording is enabled by setting the global variable received_messages
to a pointer to a struct llist_head. It can be disabled again by
setting it to NULL.
Sponsored-by: On-Waves ehf
This patch adds und uses the function gbproxy_gsm48_to_peer() which
takes a GSM 04.08 message, encapsulates it in BSSGP and LLC, and
sends it to the BSS peer. This function increments vu_gen_tx_bss
which is now used instead of imsi_acq_retries to set the N(U) of the
outgoing message.
Since imsi_acq_retries isn't currently incremented before a Detach
Accept is generated, this patch also fixes the N(U) of such messages.
Sponsored-by: On-Waves ehf
Currently then link_info is not cleaned up completely, when
gbproxy_unregister_link_info is called.
This patch adds a function gbproxy_reset_link that must be defined
externally. This is done in gb_proxy.c, where it resets the IMSI
acquisition.
Sponsored-by: On-Waves ehf
That message is currently ignored but should invalidate the TLLI and
de-register the logical link instead.
This patch extends the parser to recognize such messages and to set
the invalidate_tlli flag.
Sponsored-by: On-Waves ehf
The TLLI should also be invalidated:
- when an Attach Reject info is received from the SGSN
- when an Attach Req is immediately followed by a Detach Req
- when an Attach Req is immediately followed by an MT detach
procedure
To verify that, this patch adds corresponding message sequences to
the test.
Sponsored-by: On-Waves ehf
This fixes the IMSI length assertion, which currently uses a
greater-or-equal than zero comparison which always yields true. It is
replaced by a greater than zero check.
Fixes: Coverity CID 1239442
Sponsored-by: On-Waves ehf
Jacob Erlbeck