Currently the APN IE in the Activate PDP Contex Request and the PDP
data that is stored with the subscriber is ignored completely.
This commit adds the sgsn_mm_ctx_find_ggsn_ctx that checks the APN IE
against the subscriber's PDP data entries if both are present. If
there is no match, the request is rejected.
If an APN IE has not been included but PDP data entries are present,
the function checks all of these entries against the static 'apn'
configuration to find a suitable entry.
If an APN has not been determined so far and any APN is allowed, the
configuration is checked with an empty APN string, to allow for
default configurations based on the IMSI prefix only.
If nothing of this succeeded but the request wasn't rejected either,
and there is no 'apn' configuration at all or if any APN is allowed
but a default configuration ist not present, the GGSN with id 0 is
used (if present).
Otherwise the request is rejected ('missing APN').
Ticket: OW#1334
Sponsored-by: On-Waves ehf
This commit adds the exported functions apn_ctx_find_alloc,
apn_ctx_free, apn_ctx_by_name, and apn_ctx_match to manage and
retrieve APN to GGSN mappings.
The following VTY commands are added to 'config-sgsn':
- apn APN ggsn <0-255>
- apn APN imsi-prefix PREFIX ggsn <0-255>
which maps an APN gateway string to an SGSN id. The SGSN must be
configured in advance. When matching an APN string, entries with a
leading '*' are used for suffix matching, otherwise an exact match is
done. When a prefix is given, it is matched against the IMSI. If
several entries match, a longer matching IMSI prefix has precedence.
If there are several matching entries with the same PREFIX, the entry
with longest matching APN is returned.
Ticket: OW#1334
Sponsored-by: On-Waves ehf
Currently the PDP info that is transmitted via GSUP is just parsed
and then discarded.
This commit adds a new data structure sgsn_subscriber_pdp_data and
maintains a list of those in sgsn_subscriber_data. The PDP data is
copied from an incoming GSUP UpdateLocationResult message. If that
message contains the PDPInfoComplete flag, the list is cleared before
new entries are added. The 'show subscriber cache' output now also
shows the PDP data entries.
Note that the InsertSubscriberData message is still not supported.
[hfreyther: Added talloc_free in gprs_subscr_pdp_data_clear]
Sponsored-by: On-Waves ehf
Currently the MM context is not deleted when a GSUP location
cancellation message is processed, because the real
sgsn_update_subscriber_data function has been wrapped to a dummy
implementation.
This commit adds an explicit call to sgsn_mm_ctx_cleanup_free which
also unassigns the LLME, so the call to gprs_llgmm_assign is removed.
It also adds an assertion to check that there are no talloc'ed blocks
left in tall_bsc_ctx.
Addresses:
== 372 bytes in 1 blocks are possibly lost in loss record 7 of 9
== at 0x402A17C: malloc (in /usr/lib/valgrind/vgpreload_memcheck-x86-linux.so)
== by 0x4059FB8: _talloc_zero (talloc.c:354)
== by 0x8055B82: sgsn_mm_ctx_alloc (gprs_sgsn.c:167)
== by 0x804A336: alloc_mm_ctx (sgsn_test.c:140)
== by 0x804B24D: test_subscriber_gsup (sgsn_test.c:503)
== by 0x804EC99: main (sgsn_test.c:1853)
Sponsored-by: On-Waves ehf
This commit adds a check after a GSUP message has been decoded
whether it is an error message and does not contain a cause value.
If his is the case, the cause value is set to 'Network failure', so
that this cause if effectively the default value for error messages.
Sponsored-by: On-Waves ehf
Currently there are not any test cases for PurgeMS GSUP messages in
test_subscriber_gsup.
This commit adds tests for incoming PurgeMSResult and -Error
messages.
Sponsored-by: On-Waves ehf
Currently the MM context cleanup code is distributed over several
functions. sgsn_mm_ctx_free not only frees data structure but also
eventually stops the timer and does the subscriber clean-up.
mm_ctx_cleanup_free (gprs_gmm.c) cleans up the PDP contexts and
unassign the TLLI.
This commit moves the cleanup code from both functions into a new
unifying function sgsn_mm_ctx_cleanup_free that cares about the
clean-up of all related sub-systems.
Sponsored-by: On-Waves ehf
Currently, sgsn_update_subscriber_data can be called with mmctx ==
NULL and will find and associate the right context (if present) based
on the subscriber's IMSI. This will not happen in regular use
any more, since sgsn_update_subscriber_data will only be called when
subscribers are used (auth mode 'remote') and in this case
gprs_subscr_get_or_create_by_mmctx will already be called by
sgsn_auth_request. Therefore, MM context and subscriber are always
associated except for some test cases and experimental VTY usage.
The current implementation of sgsn_update_subscriber_data also causes
additional complexity for the deletion on MM contexts to avoid a
ipossible double-free MM contexts.
This commit removes the MM context <-> subscriber association code
from sgsn_update_subscriber_data. That function must always be called
with mmctx != NULL, now. To avoid problems with VTY and test usage,
the calling subscriber function now only call
sgsn_update_subscriber_data when mmctx != NULL, since the purpose of
that function is to update that state of an existing MM context after
subscriber data has been changed.
Sponsored-by: On-Waves ehf
The old name is somewhat misleading. The function is rather preparing
the subscriber for a subsequent subscr_free, that is possibly invoked
by a subscr_put. It detaches the subscriber from the MM context and
optionally invokes a PURGE_MS procedure. Therefore the _cleanup
suffix is chosen (see mm_ctx_cleanup_free).
Sponsored-by: On-Waves ehf
Currently gprs_subscr_delete implicitely calls subscr_put, which
makes the code more complex than necessary (additional subscr_get) in
a few places. It also makes it more difficult to see, whether get/put
are balanced within a function. In addition, the functions are not
named consistently (gprs_subscr_delete vs.
gprs_subscr_put_and_cancel).
This commit changes the semantics of gprs_subscr_delete and
indirectly of gprs_subscr_put_and_cancel to not call subscr_put on
their argument, but to leave that for the caller to do it
explicitely.
It renames gprs_subscr_put_and_cancel to gprs_subscr_cancel to
reflect that change in the name, too.
Sponsored-by: On-Waves ehf
The subscriber cache would help in case:
* GPRS DETACH, GPRS ATTACH. In that case we might still
have some cached authentication tuples we avoid another
sendAuthenticationInfo request.
* After a detach the cache expiry would make sure to
eventually send a purgeMS to the HLR (which might be
ignored).
At the same time to make the cache work we will need to
make sure to start and stop timers. In case we don't
start we might accumulate subscribers. I am afraid that
the above two benefits do not outweight the complexity
of this implementation.
Currently, if assert_subscr were called with subscr == NULL, the
later call to subscr_put might fail, as Coverity has complained. In
addition, the call to subscr_put would free the subscr object if it
were in the cache with a refcount of 0 at the time assert_substr was
called.
This patch adds a check for the subscr being non-NULL and reorders
the checks, so that the subscr_put comes last.
Fixes: Coverity CID 1264590
Sponsored-by: On-Waves ehf
Currently no GSUP LocationCancellationResult message is sent back to
the peer (HLR), if the procedure succeeded at the SGSN's side.
This patch adds the missing message and put the whole request
handling of this procedure into a separate function.
Ticket: OW#1338
Sponsored-by: On-Waves ehf
Currently gprs_subscr_rx_gsup_message creates a subscriber entry if
such an entry doesn't exist for the IMSI within an
InsertSubscriberData GSUP message. This behaviour is not compliant to
GSM 09.02, 20.3.3.2 (Subscriber data management/SGSN) where it is
defined, that an error ("Unidentified subscriber") shall be returned.
This patch removes the case distinction, so that an existing
subscriber entry is required for all incoming GSUP messages.
Sponsored-by: On-Waves ehf
Currently, an incoming GSUP request message isn't answered at all if
it is not handled due to an error or missing implementation.
This patch adds GSUP error replies for these requests (and only for
requests). It also adds tests for these cases.
Note that several of these tests check for
GMM_CAUSE_MSGT_NOTEXIST_NOTIMPL, which will have to be changed, when
the features are implemented.
Sponsored-by: On-Waves ehf
GSM 09.02, 19.4.1.4 mandates that no other MAP procedures shall be
started until the PURGE_MS procedure has been completed.
This patch implements this by adding corresponding state and checks
to gprs_subscr_purge, gprs_subscr_location_update, and
gprs_subscr_update_auth_info. If an Update Location or a Send Auth
Info Req procedure is not started because of blocking, the retry
mechanism is aborted to shorten the blocking time. The outstanding
Purge MS procedure itself is not aborted.
Sponsored-by: On-Waves ehf
When a subscriber entry is going to be deleted by SGSN and when the
subscriber info has been obtained from a remote peer via GSUP, the
peer should be informed before the entry is really deleted. For this
purpose, MAP defines the PURGE MS procedure (see GSM 09.02, 19.1.4).
This patch adds support for the PURGE_MS_REQ/_ERR/_RES messages and
invokes the procedure when the subscriber entry is going to be
removed. This only applies if GSUP is being used, the Update
Location procedure has been completed successfully, and the
subscriber has not been cancelled. The removal of the entry is
delayed until a PURGE_MS_RES or PURGE_MS_ERR message is received.
Note that GSM 09.02, 19.1.4.4 implies that the subscriber data is not
to be removed when the procedure fails which is not the way the
feature has been implemented.
Note that handling 'P-TMSI freezing' is not implemented.
Ticket: OW#1338
Sponsored-by: On-Waves ehf
This commit adds talloc reports to log remaining NULL chunks after the
terminates. It also adds explicit checks for empty subscriber lists.
Sponsored-by: On-Waves ehf
This test replaces gprs_gsup_client_send by a custom function, that
emulates a GSUP remote peer by calling gprs_subscr_rx_gsup_message
with responses for all requests. It then executes a full
Attach/Detach cycle.
Sponsored-by: On-Waves ehf
Set the expiry delay after the subscriber has been deleted (e.g. by
freeing the MM context). If cancelled, the subscriber will be deleted
immediately and no timeout will be set. If the expiry time is set to
SGSN_TIMEOUT_NEVER, no timer will be started and the subscriber entry
will be kept until it is cancelled.
The following VTY command is added to the sgsn node:
- subscriber-expiry-time <0-999999> set expiry time in seconds
- no subscriber-expiry-time set to SGSN_TIMEOUT_NEVER
The default is an expiry time of 0 seconds, which means that the
subscriber entries are wiped out immediately after an MM context is
destroyed.
Note that unused MM contexts are not expired yet. Therefore the
subscriber will only be expired after a successful MM detach.
Sponsored-by: On-Waves ehf
The code sequence that checks, whether a subscriber is still
reachable for a given IMSI, is repeated several times.
This patch puts this code sequence into a single function and adds a
check for the IMSI after the entry has been found. In addition,
some comments are extended.
Sponsored-by: On-Waves ehf
Currently the subscribers are not really deleted by
cleanup_subscr_by_imsi, but kept in RAM instead.
This patch fixes this and adds a test to verify, that the subscriber
is really deleted afterwards.
Sponsored-by: On-Waves ehf
Currently the GSUP message handling function in gprs_subscriber.c and
the functions in gprs_gsup_messages.c are not consistent with respect
to the return codes if an error happens. Albeit all error return
codes are negative, the semantics of the absolute value are not
clearly defined. In addition, some return codes are not passed to the
calling function.
This path changes these functions to always return a negated GMM
cause value in case of errors. Return values of called parser
functions are not longer ignored.
Sponsored-by: On-Waves ehf
This patch extends gsm0408_gprs_access_denied and
gsm0408_gprs_access_cancelled to accept GMM cause codes. These are
then passed to the MS, unless gsm0408_gprs_access_cancelled is called
with cause 0 (no error -> updateProcedure).
Since gsm0408_gprs_access_denied uses GMM_CAUSE_GPRS_NOTALLOWED if
the cause is not set, and the subscriber's error_cause is never set
(and thus always 0), the SGSN's behaviour does not change with this
patch.
Sponsored-by: On-Waves ehf
Conflicts:
openbsc/include/openbsc/gprs_sgsn.h
[hfreyther: Conflict due the removal of the unused
authenticate flag]
This patch extends test_gmm_attach to optionally resend Attach
Requests until the SGSN responds to it instead of calling
OSMO_ASSERT at a few places. The test_gmm_attach_subscr_gsup_auth
test optionally uses this feature. It is called once in either mode.
Sponsored-by: On-Waves ehf
This test calls test_gmm_attach() where the mocked subscriber
functions insert GSUP messages instead of manipulating the
subscriber structure directly.
Sponsored-by: On-Waves ehf
Currently, several lines of boiler plate are needed around a call to
gprs_subscr_rx_gsup_message.
This patch puts all of this (including the call to
gprs_subscr_rx_gsup_message) into a separate function.
Sponsored-by: On-Waves ehf
This flag is used to determine, whether the Update Location procedure
shall be invoked. This is currently only set, when the 'remote'
authorization policy is set. When the flag is set, sgsn_auth_update
will not never be called directly by sgsn_auth_request, if an Attach
Request procedure is pending, even if the remote connection fails for
some reason.
Sponsored-by: On-Waves ehf
Currently the flag 'authenticate' is managed per subscriber.
This patch replaces that flag by a global cfg.require_authentication
flag that enables/disables the use of the Auth & Ciph procedure for
every subscriber. The flag is set by the VTY, if and only if the
authorization policy is 'remote'.
The VTY command
- update-subscriber imsi IMSI insert authenticate <0-1>
is removed.
Sponsored-by: On-Waves ehf
Currently the mocked bssgp_tx_dl_ud function used for testing in
sgsn_test.c does not free the msg as it is done by the original
function. This leads to a msgb leak in the test.
This patch fixes the test code accordingly and uncomments the
assertion that checks for left-over msgbs.
Sponsored-by: On-Waves ehf
This commit adds talloc reports to log remaining chunks after the
testing has been finished. It also adds a (currently disabled) check,
that no msgbs are allocated after running the tests.
Sponsored-by: On-Waves ehf
This patch extends gprs_subscr_query_auth_info and
gprs_subscr_location_update to create GSUP messages with the help of
a static gprs_subscr_tx_gsup_message function. A corresponding
gprs_subscr_rx_gsup_message is added which takes a messages, gets the
subscr, and updates it accordingly.
Sponsored-by: On-Waves ehf
[hfreyther: Added a msgb_free gprs_subscr_tx_gsup_message]
This implements the MAP way of subscriber validation when the MS
tries to perform an Attach Request:
1. perform authentication (optionally invoke the sendAuthInfo
procedure), starts the Auth & Ciph procedure
2. perform update location
3. insert subscriber data
4. finish the update location
5. Attach Accept / Attach Reject
The authentication triplets are used and eventually updated if all of
them have been used.
This is currently accessible via the VTY interface by the following
commands:
- update-subscriber imsi IMSI update-auth-info
- update-subscriber imsi IMSI update-location-result (ok|ERR-CAUSE)
Sponsored-by: On-Waves ehf
This commit add data structures, functions, initialization, and VTY
commands for per subscriber authentication triplets.
The following VTY command is added:
- update-subscriber imsi IMSI \
insert auth-triplet <1-5> sres SRES rand RAND kc KC
Note that the triplets are not really used by the SGSN yet.
Sponsored-by: On-Waves ehf
This commit mainly extends sgsn_auth.c to use and support the
auth_state SGSN_AUTH_AUTHENTICATE. It will be activated when IMSI and
IMEI are available, authentication is required
(subscr->sgsn_data->authenticate is set), but the MM context is not
marked as authenticated. If the state has been set to
SGSN_AUTH_AUTHENTICATE and sgsn_auth_update() is called, the GMM
layer will be informed by invoking gsm0408_gprs_authenticate().
Sponsored-by: On-Waves ehf
This function is called to delete an established MM context
silently without invoking a detach procedure.
It is called when a subscriber is cancelled by the HLR. This
generally happens, when an MS has moved to another routing area and
has to use another SGSN.
Sponsored-by: On-Waves ehf
This commit adds a new authorization policy 'remote' and uses
the subscriber cache for authorization when this policy is being used.
Note that there is no remote backend implemented yet. After the
IMSI/IMEI have been acquired, a request would be sent to the remote
peer. The attach/auth-ciph procedure continues when authorization
info has been received from the peer. This means, that
gprs_subscr_update() must be called then to tell the GMM layer
that it can proceed. A later commit will add VTY commands to do this
manually.
Sponsored-by: On-Waves ehf
This patch adds GPRS specific functions for gsm_subscriber objects
(allocation, retrieval, deletion) and subscriber data
requests/updates. The sgsn_update_subscriber_data callback is used to
notify the sgsn about updates and is extended by a parameter that
passes a reference to a gsm_subscriber.
Sponsored-by: On-Waves ehf
The commit "sgsn: Don't send XID reset after Detach Accept" fixed the
SGSN to not respond to a Detach Accept message when there is no MM
context.
This patch adds a test case to verify, that there is really no
message sent in that case.
The test fails when the commit mentioned aboved is reverted.
Sponsored-by: On-Waves ehf
Currently the expected P-TMSI generated by the SGSN is hard-coded
into the test. This adds a dependency on the implementation of rand()
and thus the libc used. This breaks the test e.g. on FreeBSD.
This patch modifies test_gmm_attach() to srand(1) first, generate the
P-TMSI, and finally srand(1) again before starting the test.
Sponsored-by: On-Waves ehf
Currently the function in sgsn_auth.c either have an sgsn_config or
an sgsn_instance parameter. Since then global sgsn variable is
already being used in that file and since other parts of the SGSN
related code also rely on a global sgsn singleton, these parameters
pretend to provide a flexibility that is not really supported.
Therefore this patch removes these parameters except for the ACL
related functions, which do not call code that uses the sgsn
variable.
Sponsored-by: On-Waves ehf
Currently every time an RA Update Req or an Attach Req is processed, a
new P-TMSI is allocated. When an MS issues another of these messages
before it has completed the first procedure, old_ptmsi is replaced by
ptmsi (and thus lost) and ptmsi is replaced by the newly allocated
P-TMSI. This can confuse the gbproxy, which can loose track of the
logical link then. At least a Blackberry emits a double set of RA Upd
Req messages from time to time which may be just 20ms apart.
This patch adds a check whether mm->ptmsi or mm->old_ptmsi are set.
If both are set, the P-TMSI is not re-allocated. This is only the
case, when the Complete message has not been received yet, since that
message will reset old_ptmsi.
Sponsored-by: On-Waves ehf
Currently, the LLME is not cleaned up after sending an RA Update
Reject. This happens after entering a routing area from outside,
since in that case the SGSN sends an RA Update Reject (implicitly
detached) which causes the MS to restart the attach procedure.
The LLME is also not updated if an Attach Request with message errors
(encoding, invalid MI type) is received or if an MM context cannot be
allocated.
This patch changes gsm48_rx_gmm_ra_upd_req and gsm48_rx_gmm_att_req
to unassign the LLME or free the MM context (if available) after a
Reject message has been sent.
Ticket: OW#1324
Sponsored-by: On-Waves ehf
Currently the VTY 'auth-policy' command results in setting or clearing
the acl_enabled flag. This also enables the matching of the MCC/MNC
prefix of the IMSI.
This patch adds an additional policy 'acl-only' which disables the
MCC/MNC matching and relies on the ACL only.
Sponsored-by: On-Waves ehf
Currently the IMSI is only checked immediately when an Attach Request
is received that contains an IMSI IE. If it contains a P-TMSI
instead, access is always granted.
This commit moves the IMSI check to gsm48_gmm_authorize where it is
applied when IMSI and IMEI have been acquired. This fixes the
authorization when the Attach Accept doesn't contain an IMSI.
Sponsored-by: On-Waves ehf
Currently the GMM state is set to GMM-REGISTERED when an Attach
Accept or a RA Update Accept message is sent, even if a new P-TMSI is
included. In this case 04.08 requires (see 4.7.3.1.3 and 4.7.5.1.3),
that the state is set to GMM-COMMON-PROCEDURE-INITIATED when the
Accept is sent. When the Complete is received, the SGSN shall set
the state to GMM-REGISTERED.
This patch modifies the state updates accordingly.
Sponsored-by: On-Waves ehf
This test checks the attach procedure until the Attach Complete is
received.
Note that authorization and GMM state updates are not working
properly yet.
Sponsored-by: On-Waves ehf
This replaces serveral occurences of duplicated code for message
creation and sending (passing to gsm0408_gprs_rcvmsg) into a single
function. In addition, the sgsn_tx_counter is always reset within
send_0408_message to simplify the code that checks for the number of
messages sent.
Sponsored-by: On-Waves ehf
Jacob Erlbeck