Include the hlr-Number of the subscriber in the CDR. This is useful
for debugging and understanding which equipment was used during the
test. In contrast to the MSISDN the '+' is emitted as the number
must be in international format already.
In case there is a subscr attached to the MM context and there
is an encoded MSISDN we will attempt to decode it and in case
of an international number prepend a '+'. Assume that the array
size of gsm_mmcc_called->number is as big as ctx->msisdn for the
strncpy.
Currently the APN IE in the Activate PDP Contex Request and the PDP
data that is stored with the subscriber is ignored completely.
This commit adds the sgsn_mm_ctx_find_ggsn_ctx that checks the APN IE
against the subscriber's PDP data entries if both are present. If
there is no match, the request is rejected.
If an APN IE has not been included but PDP data entries are present,
the function checks all of these entries against the static 'apn'
configuration to find a suitable entry.
If an APN has not been determined so far and any APN is allowed, the
configuration is checked with an empty APN string, to allow for
default configurations based on the IMSI prefix only.
If nothing of this succeeded but the request wasn't rejected either,
and there is no 'apn' configuration at all or if any APN is allowed
but a default configuration ist not present, the GGSN with id 0 is
used (if present).
Otherwise the request is rejected ('missing APN').
Ticket: OW#1334
Sponsored-by: On-Waves ehf
Currently the MM context cleanup code is distributed over several
functions. sgsn_mm_ctx_free not only frees data structure but also
eventually stops the timer and does the subscriber clean-up.
mm_ctx_cleanup_free (gprs_gmm.c) cleans up the PDP contexts and
unassign the TLLI.
This commit moves the cleanup code from both functions into a new
unifying function sgsn_mm_ctx_cleanup_free that cares about the
clean-up of all related sub-systems.
Sponsored-by: On-Waves ehf
Currently the size argument of strncpy is set to sizeof(mm->imsi) in
some places. If the source IMSI string is too long, the terminating
NUL byte in the static mm->imsi field gets overwritten.
This patch limits the size to sizeof(mm->imsi)-1, so that the last
byte of the buffer (that has been initialized to 0) is not
overwritten.
Fixes: Coverity CID 12065751, 12065754, 1206575
Sponsored-by: On-Waves ehf
Currently old LLMEs and MM contexts that haven't been explicitly
detached or cancelled are not removed until another request with the
same IMSI is made. These stale entries may accumulate over time and
severely compromise the operation of the SGSN.
This patch implements age based LLME expiry, when the maximum age has
been reached, the corresponding MM context is cancelled. If such an MM
context doesn't exist, the LLME is unassigned directly.
The implementation works as follows.
- llme->age_timestamp is reset on each received PTP LLC message
- sgsn_llme_check_cb is invoked periodically (each 30s)
- sgsn_llme_check_cb sets the age_timestamp to the current time if
it has been reset
- sgsn_llme_check_cb computes the age and expires the LLME if
it exceeds gprs_max_time_to_idle()
Ticket: OW#1364
Sponsored-by: On-Waves ehf
[hfreyther: Fix typo in comment LMME -> LLME]
Currently the T3312 timer is directly set as encoded value when
generating the Attach/RAU Accept messages.
This patch adds GSM0408_T3312_SECS and uses it to set the
information element's value.
Sponsored-by: On-Waves ehf
Currently this optional IE is omitted, so that the optional
'Requested READY timer value' of the corresponding Request message
is used by the MS (or the default value if this IE is not used).
This patch extends gsm48_tx_gmm_att_ack and gsm48_tx_gmm_ra_upd_ack
to always include the IE set to the default value of T3312 (44s,
see GSM 04.08, table 11.4a).
Ticket: OW#1364
Sponsored-by: On-Waves ehf
Currently an error_cause of 0 is being used to indicate normal
operation. Albeit this is not a defined GMM cause, the value is not
explicitly reserved.
This commit adds the macro SGSN_ERROR_CAUSE_NONE and uses it for
initialisation (instead of relying on talloc_zero) and comparisons.
The value is set to -1 to be on the safe side. The VTY code is
updated to set the error_cause when using the
'update-subscriber imsi IMSI update-location-result CAUSE' command.
Sponsored-by: On-Waves ehf
This patch extends gsm0408_gprs_access_denied and
gsm0408_gprs_access_cancelled to accept GMM cause codes. These are
then passed to the MS, unless gsm0408_gprs_access_cancelled is called
with cause 0 (no error -> updateProcedure).
Since gsm0408_gprs_access_denied uses GMM_CAUSE_GPRS_NOTALLOWED if
the cause is not set, and the subscriber's error_cause is never set
(and thus always 0), the SGSN's behaviour does not change with this
patch.
Sponsored-by: On-Waves ehf
Conflicts:
openbsc/include/openbsc/gprs_sgsn.h
[hfreyther: Conflict due the removal of the unused
authenticate flag]
Currently the mapping between GSM 04.08 (GPRS) protocol specific
numbers and their textual description was put into gprs_gmm.c and not
exported.
This commit moves the mappings to a new file gsm_04_08_gprs.c,
renames some of them, and exports them via gsm_04_08_gprs.h.
The following identifiers are renamed to match the corresponding type
names:
- gmm_cause_names -> gsm48_gmm_cause_names
- gsm_cause_names -> gsm48_gsm_cause_names
Sponsored-by: On-Waves ehf
Currently, when a BSSGP SUSPEND is received and the corresponding MM
context is already in the state GMM_REGISTERED_SUSPENDED, a
SUSPEND_NACK is returned which is not covered by GSM 08.18, 7.4.1.
The same goes for RESUME in the state GMM_REGISTERED_NORMAL.
This commit changes gprs_gmm_rx_suspend and gprs_gmm_rx_resume to not
complain (and thus answer a NACK) when the MM context is either in
GMM_REGISTERED_SUSPENDED or GMM_REGISTERED_NORMAL.
Note that GSM 08.18, 7.4.1 and 7.5.1 only mention to send an NACK if
the MS is not known. Even with this patch, the SGSN returns a NACK if
either the MS is unknown _or_ the MM context ist not in one of the
state GMM_REGISTERED_SUSPENDED and GMM_REGISTERED_NORMAL.
Sponsored-by: On-Waves ehf
Currently the Authentication and Ciphering procedure is not yet
invoked by the GMM layer.
This patch starts this procedure from within gsm48_gmm_authorize when
the mm->auth_state has been set to SGSN_AUTH_AUTHENTICATE and a call
to gsm0408_gprs_authenticate has been issued directly or indirectly
by the call to sgsn_auth_request.
Sponsored-by: On-Waves ehf
This function is called to delete an established MM context
silently without invoking a detach procedure.
It is called when a subscriber is cancelled by the HLR. This
generally happens, when an MS has moved to another routing area and
has to use another SGSN.
Sponsored-by: On-Waves ehf
Currently the SRES value in the Auth & Ciph Response is ignored.
This patch checks the SRES value in response against the value stored
in mm->auth_triplet.sres. If they don't match, an Auth & Ciph Reject
message is sent to the MS. If they match, the mm->is_authenticated
flag is set.
Note that the procedure will not be started yet.
Sponsored-by: On-Waves ehf
Currently mmctx_timer_start is called from within
gsm48_tx_gmm_auth_ciph_req which differs from the way e.g. the
identification procedure is implemented. It also makes it more
difficult to restart the procedure after timeout, which is not
implemented yet. In addition, the timer is not properly stopped when
an AUTH & CIPH response is received.
This patch removes this timer start from gsm48_tx_gmm_auth_ciph_req,
adds the retransmission of Auth & Ciph requests to the timer callback
function, and properly stops the timer in
gsm48_rx_gmm_auth_ciph_resp.
Sponsored-by: On-Waves ehf
Currently gsm48_tx_gmm_auth_ciph_req/_rej are commented out. In
addition, gsm48_tx_gmm_auth_ciph_req uses a wrong encoding (two byte TV instead of two nibbles TV) of the CKSN information element.
This patch fixes the encoding of the CKSN IE and enables the
functions mentioned above.
Sponsored-by: On-Waves ehf
Currently the function in sgsn_auth.c either have an sgsn_config or
an sgsn_instance parameter. Since then global sgsn variable is
already being used in that file and since other parts of the SGSN
related code also rely on a global sgsn singleton, these parameters
pretend to provide a flexibility that is not really supported.
Therefore this patch removes these parameters except for the ACL
related functions, which do not call code that uses the sgsn
variable.
Sponsored-by: On-Waves ehf
Currently the authorization is done in sgsn_auth_request for ACL
based authorization. This doesn't match the way remote authorization
would work, so that there is a second call to sgsn_auth_state already
present in sgsn_auth_update.
This patch removes the autorization check completely from
sgsn_auth_request which in turn calls sgsn_auth_update directly now.
Sponsored-by: On-Waves ehf
Currently every time an RA Update Req or an Attach Req is processed, a
new P-TMSI is allocated. When an MS issues another of these messages
before it has completed the first procedure, old_ptmsi is replaced by
ptmsi (and thus lost) and ptmsi is replaced by the newly allocated
P-TMSI. This can confuse the gbproxy, which can loose track of the
logical link then. At least a Blackberry emits a double set of RA Upd
Req messages from time to time which may be just 20ms apart.
This patch adds a check whether mm->ptmsi or mm->old_ptmsi are set.
If both are set, the P-TMSI is not re-allocated. This is only the
case, when the Complete message has not been received yet, since that
message will reset old_ptmsi.
Sponsored-by: On-Waves ehf
Currently when a Detach Accept is received for an unknown TLLI (which
is in general the case afer the SGSN has requested the detachment),
an XID reset is sent to the BSS, causing a BSSGP Status message. This
happens in gsm0408_rcv_gmm.
This patch moves the corresponding call to gprs_llgmm_reset downwards
so that it is not being called in that case.
Addresses:
SGSN->BSS TLLI: 0xd75b91d9 SAPI: LLGMM, UI (DTAP) (GMM) Detach Request
BSS->SGSN TLLI: 0xd75b91d9 SAPI: LLGMM, UI (DTAP) (GMM) Detach Accept
SGSN->BSS TLLI: 0xd75b91d9 SAPI: LLGMM, U, XID (Reset, IOV-UI)
BSS->SGSN TLLI: --- BSSGP STATUS (Unknown MS)
Sponsored-by: On-Waves ehf
Currently, the LLME is not cleaned up after sending an RA Update
Reject. This happens after entering a routing area from outside,
since in that case the SGSN sends an RA Update Reject (implicitly
detached) which causes the MS to restart the attach procedure.
The LLME is also not updated if an Attach Request with message errors
(encoding, invalid MI type) is received or if an MM context cannot be
allocated.
This patch changes gsm48_rx_gmm_ra_upd_req and gsm48_rx_gmm_att_req
to unassign the LLME or free the MM context (if available) after a
Reject message has been sent.
Ticket: OW#1324
Sponsored-by: On-Waves ehf
Currently the authorization of an IMSI is done by checking ACLs
synchronously which is not feasible when the subscriber data has to
be retrieved from an external source.
This patch changes this by using a callback when the information is
available. This is also done when only ACL are checked, in this case
the callback is invoked from within sgsn_auth_request(). The callback
function sgsn_update_subscriber_data calls sgsn_auth_update which
in turn calls either gsm0408_gprs_access_granted or
gsm0408_gprs_access_denied. gsm48_gmm_authorize is extended by a call
to sgsn_auth_request when IMSI and IMEI are available but the
auth_state is unknown.
The change has been successfully tested with single phones (E71 and
IPhone 5c).
Sponsored-by: On-Waves ehf
Currently the IMSI is only checked immediately when an Attach Request
is received that contains an IMSI IE. If it contains a P-TMSI
instead, access is always granted.
This commit moves the IMSI check to gsm48_gmm_authorize where it is
applied when IMSI and IMEI have been acquired. This fixes the
authorization when the Attach Accept doesn't contain an IMSI.
Sponsored-by: On-Waves ehf
Currently when forceing a reattach by sending a Detach
Request (reattach), the SGSN waits for the Detach Accept until it
frees the MM context (if present) and the LLME. If that message gets
lost or isn't sent by the MS, the LLME is never freed if it isn't
bound to an MM context.
This patch adds code to free the MM context/LLME when forcing a
reattachment.
Sponsored-by: On-Waves ehf
This patch replaces gsm0408_gprs_force_reattach(msg, mmctx) by two
functions
- gsm0408_gprs_force_reattach(mmctx)
- gsm0408_gprs_force_reattach_oldmsg(msg)
The old function basically consists of the code of the two new
functions, where the code path selected depends on mmctx == NULL,
which is harder to maintain, less obvious to use, and not consistent
with many other SGSN functions.
Sponsored-by: On-Waves ehf
Currently the MM context isn't always removed when it is
de-registered (mmctx_timer_cb), mm_state is set to GMM_DEREGISTERED
instead. This can lead to left-over MM contexts which are only
cleaned up if the MS reattaches.
This patch replaces all of these assignments by a call to
mm_ctx_cleanup_free.
Ticket: OW#1324
Sponsored-by: On-Waves ehf
Currently the GMM state is set to GMM-REGISTERED when an Attach
Accept or a RA Update Accept message is sent, even if a new P-TMSI is
included. In this case 04.08 requires (see 4.7.3.1.3 and 4.7.5.1.3),
that the state is set to GMM-COMMON-PROCEDURE-INITIATED when the
Accept is sent. When the Complete is received, the SGSN shall set
the state to GMM-REGISTERED.
This patch modifies the state updates accordingly.
Sponsored-by: On-Waves ehf
Currently the order of the 'if' clauses in gsm48_gmm_authorize
doesn't match the order in which the conditional parts are entered.
This makes it difficult to maintain. In addition the t3350_mode is
not stored in every path, so that this information is lost when the
identification procedure is started. Since the default value
coincidentally is GMM_T3350_MODE_ATT, this doesn't hurt for Attach
Requests which are the only messages that initially trigger the
authentication yet.
This patch changes the order of the 'if' clause to match the
processing order, it removes the t3350_mode parameter entirely and
introduces a mm->pending_req field. The latter must be set when the
request that causes the authorization before calling
gsm48_gmm_authorize. The gprs_t3350_mode enum is extended by
GMM_T3350_MODE_NONE (value 0, which is the default) to make it
possible to detect related initialisation errors or race conditions.
Sponsored-by: On-Waves ehf
Currently the LLME is not deleted when a GMM Status message is
received for which a mmctx cannot be found. This can fill the LLME
list with unneeded entries.
This patch adds code to unassign the LLME in that case.
Ticket: OW#1324
Sponsored-by: On-Waves ehf
The following functions are not being used:
- gsm48_tx_gmm_status_oldmsg
- gsm48_tx_sm_status_oldmsg
This patch removes the function definitions.
Sponsored-by: On-Waves ehf
Currently, when a Detach Request is received with an unknown TLLI,
it is answered by another Detach Request (!), even when a power_off
Type is used.
This patch uses gsm48_rx_gmm_det_req to handle the message instead.
So this function is changed to cope with a NULL mmctx. In that case
it doesn't unassign the llme, so this must be done manually
afterwards.
Sponsored-by: On-Waves ehf
Currently, every time the SGSN received a Detach Request from the MS
via an established logical link, it is answered by a Detach Accept.
This violates the specification (GSM 04.08, 4.7.4.1.2 and .3), which
states, that it should only be sent, if "the detach type IE value
indicates that the detach request has not been sent due to switching
off".
This patch adds a conditional to limit the sending of Detach Accept
accordingly.
Sponsored-by: On-Waves ehf
Currently the ACL code is located in sgsn_vty.c.
This commit moves this to a new file sgsn_auth.c as a first step to
make authorization more flexible in order to implement remote
acquisition on subsciber data.
Sponsored-by: On-Waves ehf
Currently each received Ident Resp triggers an Attach Accept/Reject
if IMSI and IMEI are known. This has led to duplicated Attach Accept
messages when used with the gbproxy (IMSI acquisition active) and
with certain mobile equipment (iOS).
This patch modifies gsm48_rx_gmm_id_resp to discard Ident Resp messages
if all required information (IMEI and IMSI) has been gathered.
Ticket: OW#1322
Sponsored-by: On-Waves ehf
The osmo-sgsn sends Status messages (or nothing in case of non
GMM/GSM) when the TLLI is unknown. This prevents the MS from
reconnecting.
This patch adds the initiation of an MT detach procedure to force a
re-attach to set up a valid LLE context if an LLE or an MM context
cannot be found. Since this can also be triggered by non-GMM SAPI
messages, a GPRS application callback sgsn_force_reattach_oldmsg is
added which in turn calls the GMM layer to generate the GSM 04.08
specific messages.
Note that the MS can be left in REGISTERED state after initially
wanting to detach itself, since it will receive a Detach Req
(re-attach) when sending a DEACT PDP CTX REQ after the SGSN or
gbproxy (P-TMSI patching enabled) has been restarted. This same
behaviour has been observed with another SGSN.
Sponsored-by: On-Waves ehf
Currently the PDP contexts are hard freed (via sgsn_pdp_ctx_free)
at some places in gprs_gmm.c on the reception of a Detach Req and on
re-use of an IMSI that is already associated with an MM context. This
can lead to segfaults when there is a pending request or a data
indication at libgtp.
This patch add a new function sgsn_pdp_ctx_terminate that de-associates
the PTP context from the MM context, deactivates SNDCP, sets pdp->mm
to NULL and then calls sgsn_delete_pdp_ctx. sgsn_libgtp is updated to
check for pdp->mm being non-NULL before dereferencing it. The
sgsn_pdp_ctx_terminate function will be called for each PDP context of
an MM context before this context is going to be deleted via
sgsn_mm_ctx_free. To ensure, that the ctx->llme (which is accessed
during the deactivation of SNDCP) remains valid, the call to
gprs_llgmm_assign is moved after the call to sgsn_mm_ctx_free. The
handling of re-used IMSIs is changed to mimic the processing of a
Detach Req.
Addresses:
<0002> gprs_gmm.c:654 MM(/f6b31ab0) Deleting old MM Context for same
IMSI p_tmsi_old=0xc6f19134
<000f> gprs_sgsn.c:259 PDP freeing PDP context that still has a
libgtp handle attached to it, this shouldn't happen!
[...]
SEGFAULT
Ticket: OW#1311
Sponsored-by: On-Waves ehf
On a Detach/Re-attach cycle the Address Sanitizer detected a
use-after-free kind of problem. That is because we tried to
destroy the LLME twice. The first time it is destroyed as part
of the Detach handling ans the second time it is destroyed as
part of destroying the old MM context.
In case the GPRS GMM detach message is lost the SGSN needs
to reply besides not having a MM entry.
The alternative would have been to add NULL checks for all
usages of ctx->llme which would not have helped with the
readability.
Sponsored-by: On-Waves ehf
The wrong field has been use for the field length computation. This
hadn't any impact so far, since
sizeof(ctx->imei) == sizeof(ctx->imsi)
This patch fixes the computation to use the right field.
Sponsored-by: On-Waves ehf
CC gprs_gmm.o
gprs_gmm.c: In function ‘gsm48_tx_gmm_att_ack’:
gprs_gmm.c:350:11: warning: unused variable ‘ptsig’ [-Wunused-variable]
uint8_t *ptsig, *mid;
^
gprs_gmm.c: In function ‘gsm48_rx_gmm_auth_ciph_resp’:
gprs_gmm.c:524:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
int rc;
^
gprs_gmm.c: In function ‘gsm48_rx_gmm_att_req’:
gprs_gmm.c:703:9: warning: implicit declaration of function ‘sgsn_acl_lookup’ [-Wimplicit-function-declaration]
!sgsn_acl_lookup(mi_string))) {
^
gprs_gmm.c:632:40: warning: variable ‘old_ra_info’ set but not used [-Wunused-but-set-variable]
uint8_t *cur = gh->data, *msnc, *mi, *old_ra_info, *ms_ra_acc_cap;
^
gprs_gmm.c: In function ‘gsm48_rx_gmm_ra_upd_req’:
gprs_gmm.c:915:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
int rc;
^
gprs_gmm.c:910:11: warning: variable ‘ms_ra_acc_cap’ set but not used [-Wunused-but-set-variable]
uint8_t *ms_ra_acc_cap;
^
gprs_gmm.c: At top level:
gprs_gmm.c:458:12: warning: ‘gsm48_tx_gmm_auth_ciph_req’ defined but not used [-Wunused-function]
static int gsm48_tx_gmm_auth_ciph_req(struct sgsn_mm_ctx *mm, uint8_t *rand,
^
gprs_gmm.c:501:12: warning: ‘gsm48_tx_gmm_auth_ciph_rej’ defined but not used [-Wunused-function]
static int gsm48_tx_gmm_auth_ciph_rej(struct sgsn_mm_ctx *mm)
^
gprs_gmm.c:1169:13: warning: ‘msgb_put_pdp_addr_ipv4’ defined but not used [-Wunused-function]
static void msgb_put_pdp_addr_ipv4(struct msgb *msg, uint32_t ipaddr)
^
gprs_gmm.c:1180:13: warning: ‘msgb_put_pdp_addr_ppp’ defined but not used [-Wunused-function]
static void msgb_put_pdp_addr_ppp(struct msgb *msg)
This adds a minimalistic ACL by which certain, individual roaming IMSIs
can be authorized to use the SGSN. So you can selectively bypass the
'MCC+MNC == first 5 digits of IMSI' checking for a couple of IMSIs
Original code was inconsistent about lengths and could lead to out
of bounds write. Lengths were also inconsistent with the TS 24.008.
Fixes: Coverity CID 1040714.
In case a MS (of which we have no MM context) sends us anything but a
GMM ATTACH REQUEST, we need to send it a LLC XID RESET (by means of
issuing LLGMM-RESET.req). Otherwise the phone will expect us to send a
specific unacknowledged sequence number that we don't know.
Thanks to Holger for pointing this bug out to me.
It seems to commonly occur when a MS is doing network re-selection and
(erroneously) sends a RA UPD REQ instead of an ATTACH REQ. The RA UPD
REJ that we sent was never seen by the GMM entity in the MS, as the LLC
entity discarded it due to sequence number mis-match.
gprs_gmm.c:240:2: warning: passing argument 4 of ‘gprs_llc_tx_ui’ discards qualifiers from pointer target type
../../include/openbsc/gprs_llc.h:151:5: note: expected ‘void *’ but argument is of type ‘const struct sgsn_mm_ctx *’
gprs_gmm.c:349:11: warning: unused variable ‘ptsig’
gprs_gmm.c:601:5: warning: too many arguments for format
gprs_gmm.c:987:25: warning: initialization discards qualifiers from pointer target type
gprs_gmm.c:1010:6: warning: ‘rc’ may be used uninitialized in this function
The byte ordering is a bit odd: The least significant byte is ahead of
the most significant byte, different from everything else in GSM that
seems to be big-endian.
Thanks to Seungju Kim <admin@manateeshome.com> for repoerting the bug.
The MS Radio Access Capability IE can be _very_ long in some recent
high-end mobile phones, way beyond the old 14-byte limit. We increase
our array to 52 bytes, and make sure not to overflow that buffer.
libosmogsm is a new library that is distributed in the libosmocore.
Now, openbsc depends on it. This patch gets openbsc with this
change.
This patch also rewrites all include path to the new
osmocom/[gsm|core]
Signed-off-by: Pablo Neira Ayuso <pablo@gnumonks.org>
In case we get a RA UPD REQ on a new cell (both served by the same
SGSN), the LLC stack should not allocate a ne LLE/LLME, as the latter
would reset the V(u)sent / V(u)recv to zero and make the MS discard
our responses.
Instead, whenever the LLC stack sees a foreign TLLI, it should always
convert it to the local TLLI before doing any lookup for a LLE/LLME.
The reason for this is quite simple: We want to make sure anyone
running a customized version of OpenBSC to operate a network will
have to release all custom modifiations to the source code.
As we do not yet use the HLR from the SGSN, we allow all MS to
attach to our GPRS network. However, if this is running in a public
environment, it could cause service interruption to users of commercial
GPRS networks.
Thus, we now check if the first 5 digits of the IMSI match the MCC/MNC
of the cell that they want to register to. Thus, any subscribers with
SIM cards from real operators will no longer be accepted.
If a MS changes RA, the RA will arrive in the new cell using the old
TLLI (masked as foreign TLLI). So we need to look-up the TLLI
in a special way, using the old RA as indicated in the 04.08 GMM
message.
There is still another bug remaining: As we somehow create a new LLC,
the sequence numbers of our responses start from 0 again, which is not
what the MS expects. This needs to be fixed in a follow-up patch.
Once The TLLI (or P-TMSI of which it is derived) change has been
confirmed by the MS, we need to unassign the old TLLI but keep
the new TLLI _without_ re-setting the LLC entity structure such
as VUsend /VUrecv counters.
Some phones (notably a Ericsson Mobile Platform based E-TEN M800)
insist on sending PDP CTX DEACT messages for contexts that have already
been deactivated. The spec doesn't really say what we should do in
this case. But since there is no "reject", we simply acknowledge it.
* separate the LLME and LLE state in the LLC layer
* introduce gprs_llgmm_assign() function for LLGMM-ASSIGN.req primitive
* change QoS profile to match 'real' SGSN
* Update the new TLLI when assigning a P-TMSI
The result now is that the LLC layer is notified of TLLI changes, which in turn
means it doesn't allocate a new LLE structure every TLLI change, which again
in turn means that the UI frame sequence number does not reset to zero.
As a result, MS should no longer ignore frames based on wrong UI sequence number.
When we send a downlink unit-data request via BSSGP, there is a lot
of information that needs to be copied from the mm context, such as
the IMSI, DRX parametes, MS radio access parameters, ...
This is a quite strange layering violation, since we now need to pass
a pointer to the MM ctx from GMM through LLC into BSSGP :(
Our state transitions and timers now reflect 04.08 for GMM much
better than before. Also, we allocate a new P-TMSI on every ATTACH
and RA UPDATE, as some phones seem to get confused if they don't
get a P-TMSI.
* store LLC SAPI as part of PDP ctx
* store NSEI + BVCI as part of MM ctx
* export gsm48_tx_gsm_act_pdp_acc() and call it from sgsn_libgtp.c
* create and use gsm48_tx_gsm_act_pdp_rej for error cases
* print SAPI as part of VTY show pdp
libgtp of the OpenGGSN project will allow us to speak the GTPv0/v1
protocol of the interface between SGSN and GGSN.
This commit includes code for the main libgtp integration (file
descriptor, select loop, timer) as well as code to encode/send
a CREATE PDP CONTEXT request.
Holger Hans Peter Freyther
Daniel Willmann
Harald Welte