The SGs interface is currently only casually mentioned in the chapter
running, even though the SGs interface is a prominent and often
requested feature. Let's give the SGs interface its own section so that
users can find the info about it quicker.
Related: OS#6008
Change-Id: Ic7c17511ee19cb7f6d5069b27beb661ecb4b0be8
In order to send the MSC's RTP endpoint IP address+port in the initial
SDP, move the MGCP CRCX up to an earlier point in the sequence of
establishing a voice call.
Update the voice call sequence chart to show the effects.
Though the semantic change is rather simple, the patch is rather huge --
things have to happen in a different order, and async waits have to
happen at different times.
The new codec filter helps to carry codec resolution information across
the newly arranged code paths.
Related: SYS#5066
Change-Id: Ie433db1ba0c46d4b97538a969233c155cefac21c
Same as voice_call_external_mncc.msc, but run with internal MNCC. Shows
some curious differences like the MNCC_LCHAN_MODIFY that internal MNCC
sends, but external doesn't.
Change-Id: Ic003322dc4e3fce24a8413688cfe18198a4dc08a
Re-run the msc_log_to_ladder.py on an actual 2G-2G voice call log, to
see if anything changed in the meantime, to prepare for upcoming changes
to the sequencing of establishing voice calls.
Also shows recent improvements on picking up RTP ports from MGCP and
MNCC.
Change-Id: I9dcf980ad24d5921c291c9aada211b37f6f3db7f
(multiple changes in one patch because who cares about this script)
tweak regexes -- they worked ok, but some of the '[^:]' should really be
'[^:)]', and they also look happier that way.
don't skip RAN=NONE, so we also see messages before Complete Layer 3.
s/sip/mncc, to generally be valid for both internal and external MNCC.
pick up RTP port information from MGCP OK
pick up RTP port information from MNCC rx and tx
add --verbose flag, to be able to check whether the regex rules are
still working (getting any hits).
fix rule_imsi_detach: should return True to be counted in --verbose.
tweak comment 'Generated by...' to include the full git path.
Change-Id: If619182ba76c6b238a1fa105a3c3449d7f473dd1
Both EXTRA_DIST and CLEANFILES had missing entries. It is easy to
forget to keep them up to date. Rather use wildcards to always pick up
all relevant files.
(Not adding *.dot because there are no .dot charts here, yet.)
Change-Id: I3a18e4608a310169d7c9cd9c1b8ac9015a990920
This way we document the recently gained support for MGW pooling.
Related: SYS#5987
Depends: osmo-gsm-manuals.git Change-Id Ieda0d4bfe6fc90da6e19c791d8ec2da89427ba3b
Change-Id: I9d8116a74a63591599c4cbafa60f9a313e6ab19c
New VTY commands have been added recently to the "mgw" node which drop
the redundant "mgw" prefix on each fo them.
Change-Id: I8ac11388e9493416b644812638e1374251725584
Depends: osmo-mgw.git Change-Id: Id55af13d2ecde49d968b9dca6a2f8108a17ec484
Related: SYS#5987
Large RAN installations may benefit from distributing the RTP voice
stream load over multiple media gateways.
libosmo-mgcp-client supports MGW pooling since version 1.8.0 (more than
one year ago). OsmoBSC has already been making use of it since then (see
osmo-bsc.git 8d22e6870637ed6d392a8a77aeaebc51b23a8a50); lets use this
feature in osmo-msc too.
This commit is also part of a series of patches cleaning up
libosmo-mgcp-client and slowly getting rid of the old non-mgw-pooled VTY
configuration, in order to keep only 1 way to configure
libosmo-mgcp-client through VTY.
Related: SYS#5091
Related: SYS#5987
Change-Id: I7670ba56fe989706579224a364595fdd4b4708ff
The manual seems to lack a section about how the MGW is set up. In the
osmo-bsc manual we have a "Configure MGCP to connect to an MGW" section
under the "Configure primary links" section. We should have the same
thing in the osmo-msc manual as well.
Change-Id: I5501739e63860c436ff606bc2758b495258cd2b9
Depends: osmo-mgw I47e7ff858d5067b46d52329be5f362ff61c0dff8
Move 'doc' subdir further down to "make sure" the osmo-msc binary is built
before the docs.
Remove msc_vty_reference.xml from the source tree.
In manuals/Makefile.am use the new BUILT_REFERENCE_XML feature recently added
to osmo-gsm-manuals, and add a build target to generate the XML using the new
osmo-msc --vty-ref-xml cmdline switch.
Depends: I613d692328050a036d05b49a436ab495fc2087ba (osmo-gsm-manuals)
Change-Id: Ib872e7979c5b5a9da1347a3f326307844cf76536
The example configs suggest to use a random ip-address as MGW address.
Lets use a loopback address here. This will suit the usual case where
MGW and MSC run together on the same machine.
Change-Id: Ie2b2094fdcfed45353d9ba22cb07eed626fd143c
Since the split of OsmoNiTB, OsmoMSC does not deal with the radio
access network directly. Therefore the only purpose of T3212 is to
control subscriber expiration in the local VLR. The timeout value
indicated in System Information Type 3 needs to be configured
separately in the BSC/RNC.
This means that we don't need to store it in deci-hours anymore.
Let's move T3212 to the group of VLR specific timers, so it can
be configured and introspected using the generic 'timer' command,
and deprecate the old '[no] periodic location update' command.
It should be also noted that in the old code subscriber expiration
timeout was actually set to twice the T3212 value plus one minute.
After this change, we apply the configured value 'as-is', but
keep the old behaviour for 'periodic location update' command.
Change-Id: I9b12066599a7c834a53a93acf5902d91273bc74f
These timers so far were implemented as a list of unsigned integers,
which has never been initialized to any reasonable defaults. Since
they are used as state timeouts in several FSMs, we might end up
staying in some state forever.
Let's migrate to generic osmo_tdef API and use default values from
table 11.2 of 3GPP TS 24.008. This way the user can introspect and
change their values from the VTY / configuration file.
Change-Id: Ia8cf98da0aea0e626c5ff088a833d7359c43847f
Related: OS#4368
This change introduces several new VTY commands letting the user
a possibility to introspect and reconfigure some of the existing
timers implemented using libosmocore's osmo_tdef API.
At the moment this covers the following timers:
- MGW specific timers:
- X1 - MGCP response timeout,
- X2 - RTP stream establishing timeout,
- RAN specific timers (same names for GERAN and UTRAN):
- X1 - Authentication and Ciphering timeout,
- X2 - RAN connection release sanity timeout,
- X3 - Handover procedure timeout.
The following commands are introduced:
- 'enable' node:
- show timer [(mgw|mncc|sccp|geran|utran|sgs)] [TNNNN]
- 'config-msc' node:
- timer [(mgw|mncc|sccp|geran|utran|sgs)] [TNNNN] [(<0-2147483647>|default)]
Both MNCC and SCCP related timer definitions are empty at the
moment. Achieved by using osmo_tdef_group API of libosmovty.
Change-Id: I6024c104b6101666c8aa1108a043910eb75db9a5
Related: OS#4368
Please note that counter "sms:delivered" assumes "Delivered MT SMS",
but actually counts total number MT SMS delivery attempts. This
change describes its _actual_ (erroneous) behaviour.
Change-Id: I081cf962ce2658ceab02699f3cdee19658d00939
Related: OS#4273
Add voice_call_full.msc, generated from a real 2G<->3G voice call log fed to
msc_log_to_ladder.py.
The idea is to document how the voice call sequence of events changes in
upcoming patches.
Change-Id: I8a907d6a4ece1f3ad78da75a8c3e3e76afd5418d
Add script that reads in an osmo-msc log output and extracts the interesting
information for displaying a sequence chart of voice call log, in mscgen
format.
I want to visualize how the sequence of messages changes across patches. It is
error prone to do it manually, and re-doing the sequence chart for every patch
(and patch rework) would be prohibitively time consuming.
Change-Id: I2e4d8778f7b83dee558517a9b23450b817ee325d
Recently, the ability to run UTRAN without encryption was added, but the config
for it was tied to the A5 GERAN encryption configuration. This affected
osmo-msc's default behavior of Iu, breaking osmo-msc ttcn3 Iu tests: the ttcn3
test suite sets A5 to 0 (no encryption) but still expects Iu to enable air
encryption. Fix this "regression".
Add a separate vty config option for UEA encryption, even if it does not
provide full granularity to select individual UEA algorithms yet.
As a result, Iu default behavior remains to enable encryption regardless of the
A5 config. UTRAN encryption can be disabled by the new cfg option
"encryption uea 0" alone.
Even though the new vty command already allows passing various combinations of
the UEA algorithm numbers, only '0' and '1 2' are accepted as valid
combinations, to reflect current osmo-msc capabilities.
Revert most changes to the msc_vlr test suite in commit "do not force
encryption on UTRAN" (I04ecd7a3b1cc603b2e3feb630e8c7c93fc36ccd7): use new
net->iu_encryption instead of net->a5_encryption_mask.
Adjust/add to test_nodes.vty transcript tests.
Related: OS#4144
Change-Id: Ie138f2fcb105533f7bc06a6d2e6deccf6faccc5b
mncc_fsm.[hc] were renamed to mncc_call.[hc] during patch review, which failed
to carry through to this sequence chart.
Also fix the MNCC_ST_* to MNCC_CALL_ST_* and MNCC_EV_* to MNCC_CALL_EV_*.
Change-Id: I03ee1b43ab95dca3c43fdb9e92dc158aad5a4203
- add SIP messages, taken from OS#1683
- change some wording and clarify some message ordering
- have a separate sipcon1 and sipcon2 for the MO and MT sides
Change-Id: I6782e416dbd8ee88d093cbef722b0c5084f3865c
Remove the conditions that always enable encryption on UTRAN.
We so far lack an explicit configuration for UTRAN encryption, and this patch
does not add any either. Instead, whether UTRAN encryption is enabled is simply
triggered on whether GERAN has A5 encryption enabled (A5/n with n > 0). Though
GERAN and UTRAN encryption are not technically related at all, this makes UTRAN
behave like GERAN for now, until we implement a proper separate configuration
for UTRAN encryption.
Adjust the msc_vlr_test_* configuration by setting the net->a5_encryption_mask
such that the expected output remains unchanged. A subsequent patch
(I54227f1f08c38c0bf69b9c48924669c4829b04b9) will add more tests, particularly
cases of UTRAN without encryption.
Adjust manual and vty doc.
Related: OS#2783
Change-Id: I04ecd7a3b1cc603b2e3feb630e8c7c93fc36ccd7
DB counters has been used to save osmo_counters & osmo_rate_ctr to a local
sqlite databases every 60 seconds.
This is quite slow e.g. 1000 subscriber might slow the msc down.
Change-Id: Id64f1839a55b5326f74ec04b7a5dbed9d269b89c
Neels Hofmeyr
Andreas Eversberg
Philipp Maier
Pau Espin
Vadim Yanitskiy
Harald Welte
Martin Hauke
Daniel Willmann
Oliver Smith