From e5e78c21bb6e63a1fd1d2e62c042ecce867c2efc Mon Sep 17 00:00:00 2001 From: Neels Hofmeyr Date: Wed, 18 Nov 2015 17:09:22 +0100 Subject: [PATCH] gtphub: add to debian build By the example of osmo-sgsn, package osmo-gtphub for debian. Sponsored-by: On-Waves ehi --- debian/control | 14 ++ debian/osmo-gtphub.default | 2 + debian/osmo-gtphub.examples | 1 + debian/osmo-gtphub.init | 150 ++++++++++++++++++ debian/osmo-gtphub.install | 1 + debian/rules | 1 + .../doc/examples/osmo-gtphub/osmo-gtphub.cfg | 23 +++ 7 files changed, 192 insertions(+) create mode 100644 debian/osmo-gtphub.default create mode 100644 debian/osmo-gtphub.examples create mode 100755 debian/osmo-gtphub.init create mode 100644 debian/osmo-gtphub.install create mode 100644 openbsc/doc/examples/osmo-gtphub/osmo-gtphub.cfg diff --git a/debian/control b/debian/control index 2447d2928..c37a5caf9 100644 --- a/debian/control +++ b/debian/control @@ -50,6 +50,12 @@ Depends: ${shlibs:Depends}, ${misc:Depends} Description: Osmocom Base Station Controller Network Address Translation Network address translation for BSC. +Package: osmo-gtphub +Architecture: any +Depends: ${shlibs:Depends}, ${misc:Depends} +Description: Osmocom GTP Hub + Proxy for comms between multiple SGSNs and GGSNs. + Package: osmocom-bsc-dbg Architecture: any Section: debug @@ -105,3 +111,11 @@ Priority: extra Depends: osmocom-bsc-nat (= ${binary:Version}), ${misc:Depends} Description: Debug symbols for the OpenBSC Network Address Translation Make debugging possible + +Package: osmo-gtphub-dbg +Architecture: any +Section: debug +Priority: extra +Depends: osmo-gtphub (= ${binary:Version}), ${misc:Depends} +Description: Debug symbols for Osmocom GTP Hub + Make debugging possible diff --git a/debian/osmo-gtphub.default b/debian/osmo-gtphub.default new file mode 100644 index 000000000..6af82da39 --- /dev/null +++ b/debian/osmo-gtphub.default @@ -0,0 +1,2 @@ +CONFIG_FILE="/etc/osmocom/osmo-gtphub.cfg" + diff --git a/debian/osmo-gtphub.examples b/debian/osmo-gtphub.examples new file mode 100644 index 000000000..48c2dc028 --- /dev/null +++ b/debian/osmo-gtphub.examples @@ -0,0 +1 @@ +openbsc/doc/examples/osmo-gtphub diff --git a/debian/osmo-gtphub.init b/debian/osmo-gtphub.init new file mode 100755 index 000000000..160d55b70 --- /dev/null +++ b/debian/osmo-gtphub.init @@ -0,0 +1,150 @@ +#!/bin/sh +### BEGIN INIT INFO +# Provides: osmo-gtphub +# Required-Start: $network $local_fs +# Required-Stop: +# Default-Start: 2 3 4 5 +# Default-Stop: 0 1 6 +# Short-Description: Osmocom GTP hub +# Description: Osmocom GTP hub +### END INIT INFO + +# Author: Neels Hofmeyr + +# PATH should only include /usr/* if it runs after the mountnfs.sh script +PATH=/sbin:/usr/sbin:/bin:/usr/bin +NAME=osmo-gtphub # Introduce the short server's name here +DESC="Osmocom GTP hub" # Introduce a short description here +DAEMON=/usr/bin/osmo-gtphub # Introduce the server's location here +SCRIPTNAME=/etc/init.d/osmo-gtphub + +# Exit if the package is not installed +[ -x $DAEMON ] || exit 0 + +# Read configuration variable file if it is present +[ -r /etc/default/osmo-gtphub ] && . /etc/default/osmo-gtphub + +# Load the VERBOSE setting and other rcS variables +. /lib/init/vars.sh + +# Define LSB log_* functions. +# Depend on lsb-base (>= 3.0-6) to ensure that this file is present. +. /lib/lsb/init-functions + +DAEMON_ARGS="$DAEMON_ARGS -D -c $CONFIG_FILE" + +# +# Function that starts the daemon/service +# +do_start() +{ + # Return + # 0 if daemon has been started + # 1 if daemon was already running + # 2 if daemon could not be started + start-stop-daemon --start --quiet --exec $DAEMON --test > /dev/null \ + || return 1 + start-stop-daemon --start --quiet --exec $DAEMON -- \ + $DAEMON_ARGS \ + || return 2 + # Add code here, if necessary, that waits for the process to be ready + # to handle requests from services started subsequently which depend + # on this one. As a last resort, sleep for some time. +} + +# +# Function that stops the daemon/service +# +do_stop() +{ + # Return + # 0 if daemon has been stopped + # 1 if daemon was already stopped + # 2 if daemon could not be stopped + # other if a failure occurred + start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --name $NAME + RETVAL="$?" + [ "$RETVAL" = 2 ] && return 2 + # Wait for children to finish too if this is a daemon that forks + # and if the daemon is only ever run from this initscript. + # If the above conditions are not satisfied then add some other code + # that waits for the process to drop all resources that could be + # needed by services started subsequently. A last resort is to + # sleep for some time. + start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON + [ "$?" = 2 ] && return 2 + return "$RETVAL" +} + +# +# Function that sends a SIGHUP to the daemon/service +# +do_reload() { + # + # If the daemon can reload its configuration without + # restarting (for example, when it is sent a SIGHUP), + # then implement that here. + # + start-stop-daemon --stop --signal 1 --quiet $PIDFILE --name $NAME + return 0 +} + +case "$1" in + start) + [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC " "$NAME" + do_start + case "$?" in + 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; + 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; + esac + ;; + stop) + [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME" + do_stop + case "$?" in + 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; + 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; + esac + ;; + status) + status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $? + ;; + #reload|force-reload) + # + # If do_reload() is not implemented then leave this commented out + # and leave 'force-reload' as an alias for 'restart'. + # + #log_daemon_msg "Reloading $DESC" "$NAME" + #do_reload + #log_end_msg $? + #;; + restart|force-reload) + # + # If the "reload" option is implemented then remove the + # 'force-reload' alias + # + log_daemon_msg "Restarting $DESC" "$NAME" + do_stop + case "$?" in + 0|1) + do_start + case "$?" in + 0) log_end_msg 0 ;; + 1) log_end_msg 1 ;; # Old process is still running + *) log_end_msg 1 ;; # Failed to start + esac + ;; + *) + # Failed to stop + log_end_msg 1 + ;; + esac + ;; + *) + #echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2 + echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2 + exit 3 + ;; +esac + +: diff --git a/debian/osmo-gtphub.install b/debian/osmo-gtphub.install new file mode 100644 index 000000000..908c1a5eb --- /dev/null +++ b/debian/osmo-gtphub.install @@ -0,0 +1 @@ +/usr/bin/osmo-gtphub diff --git a/debian/rules b/debian/rules index 8047b7942..ee632a2b9 100755 --- a/debian/rules +++ b/debian/rules @@ -34,6 +34,7 @@ override_dh_strip: dh_strip -posmocom-sgsn --dbg-package=osmocom-sgsn-dbg dh_strip -posmocom-gbproxy --dbg-package=osmocom-gbproxy-dbg dh_strip -posmocom-bsc-nat --dbg-package=osmocom-bsc-nat-dbg + dh_strip -posmo-gtphub --dbg-package=osmo-gtphub-dbg override_dh_auto_configure: echo $(VERSION) > openbsc/.tarball-version diff --git a/openbsc/doc/examples/osmo-gtphub/osmo-gtphub.cfg b/openbsc/doc/examples/osmo-gtphub/osmo-gtphub.cfg new file mode 100644 index 000000000..c9bb4cf42 --- /dev/null +++ b/openbsc/doc/examples/osmo-gtphub/osmo-gtphub.cfg @@ -0,0 +1,23 @@ +! +! Osmocom gtphub configuration +! + +line vty + no login + +gtphub + ! Local addresses to listen on and send from, each on standard ports + ! 2123 and 2152. Setting these addresses is mandatory. + bind-to-sgsns 127.0.0.1 + bind-to-ggsns 127.0.0.2 + + ! Local nonstandard ports or separate IPs: + !bind-to-sgsns ctrl 127.0.0.1 2342 user 127.0.0.1 4223 + + ! Proxy: unconditionally direct all traffic to... + !ggsn-proxy 127.0.0.3 + !sgsn-proxy 127.0.0.4 + + ! Proxy with nonstandard ports or separate IPs: + !ggsn-proxy ctrl 127.0.0.3 2123 user 127.0.0.5 2152 +