doc/sequence_charts: fix naming of mncc_fsm to mncc_call

mncc_fsm.[hc] were renamed to mncc_call.[hc] during patch review, which failed
to carry through to this sequence chart.

Also fix the MNCC_ST_* to MNCC_CALL_ST_* and MNCC_EV_* to MNCC_CALL_EV_*.

Change-Id: I03ee1b43ab95dca3c43fdb9e92dc158aad5a4203
changes/59/15059/1
Neels Hofmeyr 4 years ago
parent 62c0a2a4ab
commit 7ea0db8f29
  1. 6
      doc/sequence_charts/Makefile.am
  2. 22
      doc/sequence_charts/mncc_call_fsm.msc

@ -6,17 +6,17 @@ charts: msc dot
EXTRA_DIST = \
inter_bsc_ho.msc \
inter_msc_ho.msc \
mncc_fsm.msc \
mncc_call_fsm.msc \
$(NULL)
CLEANFILES = \
inter_bsc_ho.png \
inter_msc_ho.png \
mncc_fsm.png \
mncc_call_fsm.png \
$(NULL)
msc: \
$(builddir)/mncc_fsm.png \
$(builddir)/mncc_call_fsm.png \
$(builddir)/inter_bsc_ho.png \
$(builddir)/inter_msc_ho.png \
$(NULL)

@ -1,15 +1,15 @@
msc {
hscale=3;
msc1[label="osmo-msc"], mncc1[label="MNCC FSM\n(osmo-msc mncc_fsm.c)"], sipcon1[label="osmo-sip-connector"], sip[label="PBX"], sipcon2[label="osmo-sip-connector"], mncc2[label="MNCC FSM\n(osmo-msc mncc_fsm.c)"], msc2[label="osmo-msc"];
msc1[label="osmo-msc"], mncc1[label="MNCC FSM\n(osmo-msc mncc_call.c)"], sipcon1[label="osmo-sip-connector"], sip[label="PBX"], sipcon2[label="osmo-sip-connector"], mncc2[label="MNCC FSM\n(osmo-msc mncc_call.c)"], msc2[label="osmo-msc"];
msc1 note sipcon1 [label="MO call"];
sipcon2 note msc2 [label="MT call"];
mncc1 abox mncc1 [label="MNCC_ST_NOT_STARTED"];
mncc1 abox mncc1 [label="MNCC_CALL_ST_NOT_STARTED"];
msc1 rbox msc1 [label="mncc_outgoing_start()"];
msc1 -> mncc1 [label="MNCC_EV_OUTGOING_START"];
msc1 -> mncc1 [label="MNCC_CALL_EV_OUTGOING_START"];
mncc1 abox mncc1 [label="MNCC_ST_OUTGOING_WAIT_PROCEEDING"];
mncc1 abox mncc1 [label="MNCC_CALL_ST_OUTGOING_WAIT_PROCEEDING"];
mncc1 => sipcon1 [label="MNCC_SETUP_IND
\n callref, IMSI, called and calling number, SDP"];
sipcon1 => sip [label="SIP INVITE
@ -22,7 +22,7 @@ msc {
\n callref, RTP IP address and port"];
mncc1 <= sipcon1 [label="MNCC_CALL_PROC_REQ
\n callref, RTP IP address and port"];
mncc1 abox mncc1 [label="MNCC_ST_OUTGOING_WAIT_COMPLETE"];
mncc1 abox mncc1 [label="MNCC_CALL_ST_OUTGOING_WAIT_COMPLETE"];
sip => sipcon2 [label="SIP INVITE
\n from, to, SDP"];
@ -30,10 +30,10 @@ msc {
msc2 <= sipcon2 [label="MNCC_SETUP_REQ
\n callref, called and calling number
\n SDP"];
mncc2 abox mncc2 [label="MNCC_ST_NOT_STARTED"];
mncc2 abox mncc2 [label="MNCC_CALL_ST_NOT_STARTED"];
msc2 rbox msc2 [label="mncc_incoming_start()"];
msc2 -> mncc2 [label="MNCC_EV_INCOMING_START"];
mncc2 abox mncc2 [label="MNCC_ST_INCOMING_WAIT_COMPLETE"];
msc2 -> mncc2 [label="MNCC_CALL_EV_INCOMING_START"];
mncc2 abox mncc2 [label="MNCC_CALL_ST_INCOMING_WAIT_COMPLETE"];
mncc2 => sipcon2 [label="MNCC_CALL_CONF_IND
\n callref, bearer capabilities, cccap and IMSI, SDP?"];
mncc2 <= sipcon2 [label="MNCC_RTP_CREATE
@ -67,14 +67,14 @@ msc {
mncc2 rbox mncc2 [label="mncc_rx_rtp_connect()"];
mncc2 <= sipcon2 [label="MNCC_SETUP_COMPL_REQ
\n callref"];
mncc2 abox mncc2 [label="MNCC_ST_TALKING"];
mncc2 abox mncc2 [label="MNCC_CALL_ST_TALKING"];
sipcon1 <= sip [label="SIP 200 OK INVITE"];
mncc1 <= sipcon1 [label="MNCC_SETUP_RSP
\n callref"];
mncc1 => sipcon1 [label="MNCC_SETUP_COMPL_IND
\n callref"];
mncc1 abox mncc1 [label="MNCC_ST_TALKING"];
mncc1 abox mncc1 [label="MNCC_CALL_ST_TALKING"];
sipcon1 => sip [label="SIP ACK"];
...;
@ -84,7 +84,7 @@ msc {
mncc1 rbox mncc1 [label="mncc_release()"];
mncc1 => sipcon1 [label="MNCC_DISC_IND
\n callref and cause"];
mncc1 abox mncc1 [label="MNCC_ST_WAIT_RELEASE_ACK"];
mncc1 abox mncc1 [label="MNCC_CALL_ST_WAIT_RELEASE_ACK"];
sipcon1 => sip [label="SIP BYE"];
sipcon1 <= sip [label="SIP 200 OK"];
mncc1 <= sipcon1 [label="MNCC_REL_REQ
Loading…
Cancel
Save