cellular-infrastructure
/
osmo-msc
mirror of https://gerrit.osmocom.org/osmo-msc
9
0
Fork 0
Code Issues Releases Wiki Activity
osmo-msc/doc/examples/osmo-bsc/osmo-bsc.cfg

102 lines
2.1 KiB
INI
Raw Normal View History

add sample osmo-bsc configuration file
2011-07-01 19:28:10 +00:00
!
! OsmoBSC (0.9.14+gitr1+3d331c0062bb0c9694dbd4d1eab7adc58138c3ae) configuration saved from vty
!!
password foo
!
!
line vty
no login
!
src: port openBSC over libosmo-abis This is a big patch that ports openBSC over libosmo-abis. Sorry, the changes that are included here are all dependent of libosmo-abis, splitting them into smaller pieces would leave the repository in some intermediate state, which is not desired. The main changes are: - The directory libabis/ has been removed as it now lives in libosmo-abis. - new configuration file format for nanoBTS and HSL femto, we need to define the virtual e1_line and attach it to the OML link. - all the existing BTS drivers (nanoBTS, hsl femto, Nokia site, BS11 and rbs2000) now use the new libosmo-abis framework. - use r232 input driver available in libosmo-abis for bs11_config. - use ipa_msg_recv instead of old ipaccess_read_msg function. - delete definition of gsm_e1_subslot and input_signal_data. These structures now lives in libosmo-abis. Most of this patch are deletions of libabis/ which has been moved to libosmo-abis. This patch also modifies openBSC to use all the new definitions available in libosmocore and libosmo-abis. In order to do that, we have replaced the following: - DINP, DMI, DMIB and DMUX by their respective DL* correspondences. - SS_GLOBAL by SS_L_GLOBAL - SS_INPUT by SS_L_INPUT - S_GLOBAL_SHUTDOWN by S_L_GLOBAL_SHUTDOWN - SS_INPUT by SS_L_INPUT - S_INP_* by S_L_INP_* sub-signals - E1INP_NODE by L_E1INP_NODE vty node This patch has been tested with: - one nanoBTS - the HSL femto with the examples available under libosmo-abis - BS11 with both dahdi and misdn drivers.
2011-08-17 20:44:07 +00:00
e1_input
e1_line 0 driver ipa
add sample osmo-bsc configuration file
2011-07-01 19:28:10 +00:00
network
network country code 1
mobile network code 1
short name OsmoBSC
long name OsmoBSC
auth policy closed
location updating reject cause 13
encryption a5 0
neci 1
paging any use tch 0
rrlp mode none
mm info 1
handover 0
handover window rxlev averaging 10
handover window rxqual averaging 1
handover window rxlev neighbor averaging 10
handover power budget interval 6
handover power budget hysteresis 3
handover maximum distance 9999
bts 0
type nanobts
band DCS1800
cell_identity 0
location_area_code 1
training_sequence_code 7
base_station_id_code 63
ms max power 15
cell reselection hysteresis 4
rxlev access min 0
channel allocator ascending
rach tx integer 9
rach max transmission 7
Move DTX settings to BTS * Add per-BTS DTX settings * Configure Uplink and Downlink DTX separately * Deprecate global DTX option (it was never tested/used anyway) * Use libosmocore function for DTX indicator in System Information (previously it was incorrectly assigned for half-rate channels) Related: OS#22 Change-Id: I3d55168475ad47044b6238b55846ea22bdd518a4 Reviewed-on: https://gerrit.osmocom.org/40 Tested-by: Jenkins Builder Reviewed-by: Holger Freyther <holger@freyther.de>
2016-05-11 10:45:13 +00:00
dtx uplink force
dtx downlink
add sample osmo-bsc configuration file
2011-07-01 19:28:10 +00:00
ip.access unit_id 0 0
src: port openBSC over libosmo-abis This is a big patch that ports openBSC over libosmo-abis. Sorry, the changes that are included here are all dependent of libosmo-abis, splitting them into smaller pieces would leave the repository in some intermediate state, which is not desired. The main changes are: - The directory libabis/ has been removed as it now lives in libosmo-abis. - new configuration file format for nanoBTS and HSL femto, we need to define the virtual e1_line and attach it to the OML link. - all the existing BTS drivers (nanoBTS, hsl femto, Nokia site, BS11 and rbs2000) now use the new libosmo-abis framework. - use r232 input driver available in libosmo-abis for bs11_config. - use ipa_msg_recv instead of old ipaccess_read_msg function. - delete definition of gsm_e1_subslot and input_signal_data. These structures now lives in libosmo-abis. Most of this patch are deletions of libabis/ which has been moved to libosmo-abis. This patch also modifies openBSC to use all the new definitions available in libosmocore and libosmo-abis. In order to do that, we have replaced the following: - DINP, DMI, DMIB and DMUX by their respective DL* correspondences. - SS_GLOBAL by SS_L_GLOBAL - SS_INPUT by SS_L_INPUT - S_GLOBAL_SHUTDOWN by S_L_GLOBAL_SHUTDOWN - SS_INPUT by SS_L_INPUT - S_INP_* by S_L_INP_* sub-signals - E1INP_NODE by L_E1INP_NODE vty node This patch has been tested with: - one nanoBTS - the HSL femto with the examples available under libosmo-abis - BS11 with both dahdi and misdn drivers.
2011-08-17 20:44:07 +00:00
oml ip.access stream_id 255 line 0
add sample osmo-bsc configuration file
2011-07-01 19:28:10 +00:00
neighbor-list mode manual-si5
neighbor-list add arfcn 100
neighbor-list add arfcn 200
si5 neighbor-list add arfcn 10
si5 neighbor-list add arfcn 20
gprs mode none
trx 0
rf_locked 0
arfcn 871
nominal power 23
max_power_red 20
rsl e1 tei 0
fix bsc_vty out: timeslot indented too deeply. In 'show running-config', timeslot appears as a sub-element of rsl, but it is a direct child of trx. Fix the timeslot section in vty_out by removing one space of idention. Adjust various config examples. Rationale: it's not relevant for function, but confuses human operators. Fixing it will save the next hacker some time.
2016-01-27 13:20:29 +00:00
timeslot 0
phys_chan_config CCCH+SDCCH4
hopping enabled 0
timeslot 1
phys_chan_config TCH/F
hopping enabled 0
timeslot 2
phys_chan_config TCH/F
hopping enabled 0
timeslot 3
phys_chan_config TCH/F
hopping enabled 0
timeslot 4
phys_chan_config TCH/F
hopping enabled 0
timeslot 5
phys_chan_config TCH/F
hopping enabled 0
timeslot 6
phys_chan_config TCH/F
hopping enabled 0
timeslot 7
phys_chan_config TCH/F
hopping enabled 0
Implement AoIP, port to M3UA SIGTRAN (large addition and refactoring) This was originally a long series of commits converging to the final result seen in this patch. It does not make much sense to review the smaller steps' trial and error, we need to review this entire change as a whole. Implement AoIP in osmo-msc and osmo-bsc. Change over to the new libosmo-sigtran API with support for proper SCCP/M3UA/SCTP stacking, as mandated by 3GPP specifications for the IuCS and IuPS interfaces. From here on, a separate osmo-stp process is required for SCCP routing between OsmoBSC / OsmoHNBGW <-> OsmoMSC / OsmoSGSN jenkins.sh: build from libosmo-sccp and osmo-iuh master branches now for new M3UA SIGTRAN. Patch-by: pmaier, nhofmeyr, laforge Change-Id: I5ae4e05ee7c57cad341ea5e86af37c1f6b0ffa77
2017-04-09 10:32:51 +00:00
cs7 instance 1
point-code 3.0.0
sccp-address bsc_local
point-code 3.0.0
sccp-address msc_remote
point-code 1.0.0
add sample osmo-bsc configuration file
2011-07-01 19:28:10 +00:00
msc
Implement AoIP, port to M3UA SIGTRAN (large addition and refactoring) This was originally a long series of commits converging to the final result seen in this patch. It does not make much sense to review the smaller steps' trial and error, we need to review this entire change as a whole. Implement AoIP in osmo-msc and osmo-bsc. Change over to the new libosmo-sigtran API with support for proper SCCP/M3UA/SCTP stacking, as mandated by 3GPP specifications for the IuCS and IuPS interfaces. From here on, a separate osmo-stp process is required for SCCP routing between OsmoBSC / OsmoHNBGW <-> OsmoMSC / OsmoSGSN jenkins.sh: build from libosmo-sccp and osmo-iuh master branches now for new M3UA SIGTRAN. Patch-by: pmaier, nhofmeyr, laforge Change-Id: I5ae4e05ee7c57cad341ea5e86af37c1f6b0ffa77
2017-04-09 10:32:51 +00:00
bsc-addr bsc_local
msc-addr msc_remote
add sample osmo-bsc configuration file
2011-07-01 19:28:10 +00:00
ip.access rtp-base 4000
timeout-ping 20
timeout-pong 5
dest 192.168.100.11 6666 0
bsc: Add access lists to the MSC and the BSC It is a bit arbitary to decide which one is the global and which one is the local one. We might change it around. I don't think we want to introduce it based on BTS.
2015-04-05 17:46:20 +00:00
access-list-name msc-list
no access-list-name
bsc
no access-list-name
access-list-name bsc-list