osmo-msc/include/osmocom/msc/ran_msg.h

303 lines
9.6 KiB
C
Raw Normal View History

large refactoring: support inter-BSC and inter-MSC Handover 3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles: - MSC-A is responsible for managing subscribers, - MSC-I is the gateway to the RAN. - MSC-T is a second transitory gateway to another RAN during Handover. After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while the original MSC-A retains the responsibility of subscriber management. MSC-T exists in this patch but is not yet used, since Handover is only prepared for, not yet implemented. Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC roles. Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications: - all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc instance, - messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface (GSUP), - no call routing between MSC-A and -I via MNCC necessary. This is the largest code bomb I have submitted, ever. Out of principle, I apologize to everyone trying to read this as a whole. Unfortunately, I see no sense in trying to split this patch into smaller bits. It would be a huge amount of work to introduce these changes in separate chunks, especially if each should in turn be useful and pass all test suites. So, unfortunately, we are stuck with this code bomb. The following are some details and rationale for this rather huge refactoring: * separate MSC subscriber management from ran_conn struct ran_conn is reduced from the pivotal subscriber management entity it has been so far to a mere storage for an SCCP connection ID and an MSC subscriber reference. The new pivotal subscriber management entity is struct msc_a -- struct msub lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however use msc_a, since MSC-A is where all the interesting stuff happens. Before handover, msc_i is an FSM implementation that encodes to the local ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM implementation that instead forwards via/from GSUP. Same goes for the msc_a struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the msc_a->fi is an FSM implementation that merely forwards via/from GSUP. * New SCCP implementation for RAN access To be able to forward BSSAP and RANAP messages via the GSUP interface, the individual message layers need to be cleanly separated. The IuCS implementation used until now (iu_client from libosmo-ranap) did not provide this level of separation, and needed a complete rewrite. It was trivial to implement this in such a way that both BSSAP and RANAP can be handled by the same SCCP code, hence the new SCCP-RAN layer also replaces BSSAP handling. sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN connections. A set of callback functions provides implementation specific details. * RAN Abstraction (BSSAP vs. RANAP) The common SCCP implementation did set the theme for the remaining refactoring: make all other MSC code paths entirely RAN-implementation-agnostic. ran_infra.c provides data structures that list RAN implementation specifics, from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra pointer hence allows complete abstraction of RAN implementations: - managing connected RAN peers (BSC, RNC) in ran_peer.c, - classifying and de-/encoding RAN PDUs, - recording connected LACs and cell IDs and sending out Paging requests to matching RAN peers. * RAN RESET now also for RANAP ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide proper RESET handling, which it so far duly ignores. (TODO) * RAN de-/encoding abstraction The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP implementations transparently, but also to be able to optionally handle RAN on distinct levels. Before Handover, all RAN messages are handled by the MSC-A role. However, after an inter-MSC Handover, a standalone MSC-I will need to decode RAN PDUs, at least in order to manage Assignment of RTP streams between BSS/RNC and MNCC call forwarding. ran_msg.h provides a common API with abstraction for: - receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP or RANAP; - sending RAN events: ran_enc_msg is the counterpart to compose RAN messages that should be encoded to either BSSMAP or RANAP and passed down to the BSC/RNC and MS/UE. The RAN-specific implementations are completely contained by ran_msg_a.c and ran_msg_iu.c. In particular, Assignment and Ciphering have so far been distinct code paths for BSSAP and RANAP, with switch(via_ran){...} statements all over the place. Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified. Note that SGs does not qualify for RAN abstraction: the SGs interface always remains with the MSC-A role, and SGs messages follow quite distinct semantics from the fairly similar GERAN and UTRAN. * MGW and RTP stream management So far, managing MGW endpoints via MGCP was tightly glued in-between GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP streams between different RAN peers by moving to object-oriented implementations: implement struct call_leg and struct rtp_stream with distinct FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose. Instead of implementing a sequence of events with code duplication for the RAN and CN sides, the idea is to manage each RTP stream separately by firing and receiving events as soon as codecs and RTP ports are negotiated, and letting the individual FSMs take care of the MGW management "asynchronously". The caller provides event IDs and an FSM instance that should be notified of RTP stream setup progress. Hence it becomes possible to reconnect RTP streams from one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP peers (inter-MSC Handover) without duplicating the MGCP code for each transition. The number of FSM implementations used for MGCP handling may seem a bit of an overkill. But in fact, the number of perspectives on RTP forwarding are far from trivial: - an MGW endpoint is an entity with N connections, and MGCP "sessions" for configuring them by talking to the MGW; - an RTP stream is a remote peer connected to one of the endpoint's connections, which is asynchronously notified of codec and RTP port choices; - a call leg is the higher level view on either an MT or MO side of a voice call, a combination of two RTP streams to forward between two remote peers. BSC MGW PBX CI CI [MGW-endpoint] [--rtp_stream--] [--rtp_stream--] [----------------call_leg----------------] * Use counts Introduce using the new osmo_use_count API added to libosmocore for this purpose. Each use token has a distinct name in the logging, which can be a globally constant name or ad-hoc, like the local __func__ string constant. Use in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count API. * FSM Timeouts Introduce using the new osmo_tdef API, which provides a common VTY implementation for all timer numbers, and FSM state transitions with the correct timeout. Originated in osmo-bsc, recently moved to libosmocore. Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore) Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore) Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore) Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp) I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw) Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw) I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw) Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
/* API to forward upcoming NAS events, e.g. from BSSAP and RANAP, to be handled by MSC-A or MSC-I. */
/*
* (C) 2019 by sysmocom s.f.m.c. GmbH <info@sysmocom.de>
*
* Author: Neels Hofmeyr <neels@hofmeyr.de>
*
* All Rights Reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU Affero General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Affero General Public License for more details.
*
* You should have received a copy of the GNU Affero General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include <osmocom/core/utils.h>
#include <osmocom/core/fsm.h>
#include <osmocom/core/sockaddr_str.h>
#include <osmocom/gsm/protocol/gsm_08_08.h>
#include <osmocom/mgcp_client/mgcp_client.h>
#include <osmocom/msc/msc_common.h>
struct msgb;
struct osmo_fsm_inst;
#define LOG_RAN_DEC(NAS_DEC, subsys, level, fmt, args...) \
LOGPFSMSL((NAS_DEC)? (NAS_DEC)->caller_fi : NULL, subsys, level, "RAN decode: " fmt, ## args)
#define LOG_RAN_ENC(FI, subsys, level, fmt, args...) \
LOGPFSMSL(FI, subsys, level, "RAN encode: " fmt, ## args)
/* These message types are named after the BSSAP procedures in nas_a.h; most are also used for RANAP procedures of
* similar meaning in nas_iu.h. */
enum ran_msg_type {
RAN_MSG_NONE = 0,
RAN_MSG_COMPL_L3,
RAN_MSG_DTAP,
RAN_MSG_CLEAR_COMMAND,
RAN_MSG_CLEAR_REQUEST,
RAN_MSG_CLEAR_COMPLETE,
RAN_MSG_CLASSMARK_REQUEST,
RAN_MSG_CLASSMARK_UPDATE,
RAN_MSG_CIPHER_MODE_COMMAND,
RAN_MSG_CIPHER_MODE_COMPLETE,
RAN_MSG_CIPHER_MODE_REJECT,
RAN_MSG_COMMON_ID,
RAN_MSG_ASSIGNMENT_COMMAND,
RAN_MSG_ASSIGNMENT_COMPLETE,
RAN_MSG_ASSIGNMENT_FAILURE,
RAN_MSG_SAPI_N_REJECT,
RAN_MSG_LCLS_STATUS,
RAN_MSG_LCLS_BREAK_REQ,
RAN_MSG_HANDOVER_COMMAND,
RAN_MSG_HANDOVER_PERFORMED,
RAN_MSG_HANDOVER_REQUIRED,
RAN_MSG_HANDOVER_REQUIRED_REJECT,
RAN_MSG_HANDOVER_REQUEST,
RAN_MSG_HANDOVER_REQUEST_ACK,
RAN_MSG_HANDOVER_DETECT,
RAN_MSG_HANDOVER_SUCCEEDED,
RAN_MSG_HANDOVER_COMPLETE,
RAN_MSG_HANDOVER_FAILURE,
};
extern const struct value_string ran_msg_type_names[];
static inline const char *ran_msg_type_name(enum ran_msg_type val)
{ return get_value_string(ran_msg_type_names, val); }
struct ran_clear_command {
enum gsm0808_cause gsm0808_cause;
bool csfb_ind;
};
struct ran_assignment_command {
const struct osmo_sockaddr_str *cn_rtp;
const struct gsm0808_channel_type *channel_type;
enum nsap_addr_enc rab_assign_addr_enc;
bool osmux_present;
uint8_t osmux_cid;
bool call_id_present;
uint32_t call_id;
struct osmo_lcls *lcls;
large refactoring: support inter-BSC and inter-MSC Handover 3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles: - MSC-A is responsible for managing subscribers, - MSC-I is the gateway to the RAN. - MSC-T is a second transitory gateway to another RAN during Handover. After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while the original MSC-A retains the responsibility of subscriber management. MSC-T exists in this patch but is not yet used, since Handover is only prepared for, not yet implemented. Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC roles. Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications: - all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc instance, - messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface (GSUP), - no call routing between MSC-A and -I via MNCC necessary. This is the largest code bomb I have submitted, ever. Out of principle, I apologize to everyone trying to read this as a whole. Unfortunately, I see no sense in trying to split this patch into smaller bits. It would be a huge amount of work to introduce these changes in separate chunks, especially if each should in turn be useful and pass all test suites. So, unfortunately, we are stuck with this code bomb. The following are some details and rationale for this rather huge refactoring: * separate MSC subscriber management from ran_conn struct ran_conn is reduced from the pivotal subscriber management entity it has been so far to a mere storage for an SCCP connection ID and an MSC subscriber reference. The new pivotal subscriber management entity is struct msc_a -- struct msub lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however use msc_a, since MSC-A is where all the interesting stuff happens. Before handover, msc_i is an FSM implementation that encodes to the local ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM implementation that instead forwards via/from GSUP. Same goes for the msc_a struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the msc_a->fi is an FSM implementation that merely forwards via/from GSUP. * New SCCP implementation for RAN access To be able to forward BSSAP and RANAP messages via the GSUP interface, the individual message layers need to be cleanly separated. The IuCS implementation used until now (iu_client from libosmo-ranap) did not provide this level of separation, and needed a complete rewrite. It was trivial to implement this in such a way that both BSSAP and RANAP can be handled by the same SCCP code, hence the new SCCP-RAN layer also replaces BSSAP handling. sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN connections. A set of callback functions provides implementation specific details. * RAN Abstraction (BSSAP vs. RANAP) The common SCCP implementation did set the theme for the remaining refactoring: make all other MSC code paths entirely RAN-implementation-agnostic. ran_infra.c provides data structures that list RAN implementation specifics, from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra pointer hence allows complete abstraction of RAN implementations: - managing connected RAN peers (BSC, RNC) in ran_peer.c, - classifying and de-/encoding RAN PDUs, - recording connected LACs and cell IDs and sending out Paging requests to matching RAN peers. * RAN RESET now also for RANAP ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide proper RESET handling, which it so far duly ignores. (TODO) * RAN de-/encoding abstraction The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP implementations transparently, but also to be able to optionally handle RAN on distinct levels. Before Handover, all RAN messages are handled by the MSC-A role. However, after an inter-MSC Handover, a standalone MSC-I will need to decode RAN PDUs, at least in order to manage Assignment of RTP streams between BSS/RNC and MNCC call forwarding. ran_msg.h provides a common API with abstraction for: - receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP or RANAP; - sending RAN events: ran_enc_msg is the counterpart to compose RAN messages that should be encoded to either BSSMAP or RANAP and passed down to the BSC/RNC and MS/UE. The RAN-specific implementations are completely contained by ran_msg_a.c and ran_msg_iu.c. In particular, Assignment and Ciphering have so far been distinct code paths for BSSAP and RANAP, with switch(via_ran){...} statements all over the place. Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified. Note that SGs does not qualify for RAN abstraction: the SGs interface always remains with the MSC-A role, and SGs messages follow quite distinct semantics from the fairly similar GERAN and UTRAN. * MGW and RTP stream management So far, managing MGW endpoints via MGCP was tightly glued in-between GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP streams between different RAN peers by moving to object-oriented implementations: implement struct call_leg and struct rtp_stream with distinct FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose. Instead of implementing a sequence of events with code duplication for the RAN and CN sides, the idea is to manage each RTP stream separately by firing and receiving events as soon as codecs and RTP ports are negotiated, and letting the individual FSMs take care of the MGW management "asynchronously". The caller provides event IDs and an FSM instance that should be notified of RTP stream setup progress. Hence it becomes possible to reconnect RTP streams from one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP peers (inter-MSC Handover) without duplicating the MGCP code for each transition. The number of FSM implementations used for MGCP handling may seem a bit of an overkill. But in fact, the number of perspectives on RTP forwarding are far from trivial: - an MGW endpoint is an entity with N connections, and MGCP "sessions" for configuring them by talking to the MGW; - an RTP stream is a remote peer connected to one of the endpoint's connections, which is asynchronously notified of codec and RTP port choices; - a call leg is the higher level view on either an MT or MO side of a voice call, a combination of two RTP streams to forward between two remote peers. BSC MGW PBX CI CI [MGW-endpoint] [--rtp_stream--] [--rtp_stream--] [----------------call_leg----------------] * Use counts Introduce using the new osmo_use_count API added to libosmocore for this purpose. Each use token has a distinct name in the logging, which can be a globally constant name or ad-hoc, like the local __func__ string constant. Use in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count API. * FSM Timeouts Introduce using the new osmo_tdef API, which provides a common VTY implementation for all timer numbers, and FSM state transitions with the correct timeout. Originated in osmo-bsc, recently moved to libosmocore. Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore) Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore) Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore) Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp) I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw) Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw) I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw) Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
};
struct ran_cipher_mode_command {
const struct osmo_auth_vector *vec;
const struct osmo_gsm48_classmark *classmark;
struct {
bool umts_aka;
bool retrieve_imeisv;
uint8_t a5_encryption_mask;
/* out-argument to return the key to the caller, pass NULL if not needed. */
struct geran_encr *chosen_key;
} geran;
struct {
uint8_t uea_encryption_mask;
} utran;
large refactoring: support inter-BSC and inter-MSC Handover 3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles: - MSC-A is responsible for managing subscribers, - MSC-I is the gateway to the RAN. - MSC-T is a second transitory gateway to another RAN during Handover. After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while the original MSC-A retains the responsibility of subscriber management. MSC-T exists in this patch but is not yet used, since Handover is only prepared for, not yet implemented. Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC roles. Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications: - all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc instance, - messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface (GSUP), - no call routing between MSC-A and -I via MNCC necessary. This is the largest code bomb I have submitted, ever. Out of principle, I apologize to everyone trying to read this as a whole. Unfortunately, I see no sense in trying to split this patch into smaller bits. It would be a huge amount of work to introduce these changes in separate chunks, especially if each should in turn be useful and pass all test suites. So, unfortunately, we are stuck with this code bomb. The following are some details and rationale for this rather huge refactoring: * separate MSC subscriber management from ran_conn struct ran_conn is reduced from the pivotal subscriber management entity it has been so far to a mere storage for an SCCP connection ID and an MSC subscriber reference. The new pivotal subscriber management entity is struct msc_a -- struct msub lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however use msc_a, since MSC-A is where all the interesting stuff happens. Before handover, msc_i is an FSM implementation that encodes to the local ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM implementation that instead forwards via/from GSUP. Same goes for the msc_a struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the msc_a->fi is an FSM implementation that merely forwards via/from GSUP. * New SCCP implementation for RAN access To be able to forward BSSAP and RANAP messages via the GSUP interface, the individual message layers need to be cleanly separated. The IuCS implementation used until now (iu_client from libosmo-ranap) did not provide this level of separation, and needed a complete rewrite. It was trivial to implement this in such a way that both BSSAP and RANAP can be handled by the same SCCP code, hence the new SCCP-RAN layer also replaces BSSAP handling. sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN connections. A set of callback functions provides implementation specific details. * RAN Abstraction (BSSAP vs. RANAP) The common SCCP implementation did set the theme for the remaining refactoring: make all other MSC code paths entirely RAN-implementation-agnostic. ran_infra.c provides data structures that list RAN implementation specifics, from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra pointer hence allows complete abstraction of RAN implementations: - managing connected RAN peers (BSC, RNC) in ran_peer.c, - classifying and de-/encoding RAN PDUs, - recording connected LACs and cell IDs and sending out Paging requests to matching RAN peers. * RAN RESET now also for RANAP ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide proper RESET handling, which it so far duly ignores. (TODO) * RAN de-/encoding abstraction The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP implementations transparently, but also to be able to optionally handle RAN on distinct levels. Before Handover, all RAN messages are handled by the MSC-A role. However, after an inter-MSC Handover, a standalone MSC-I will need to decode RAN PDUs, at least in order to manage Assignment of RTP streams between BSS/RNC and MNCC call forwarding. ran_msg.h provides a common API with abstraction for: - receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP or RANAP; - sending RAN events: ran_enc_msg is the counterpart to compose RAN messages that should be encoded to either BSSMAP or RANAP and passed down to the BSC/RNC and MS/UE. The RAN-specific implementations are completely contained by ran_msg_a.c and ran_msg_iu.c. In particular, Assignment and Ciphering have so far been distinct code paths for BSSAP and RANAP, with switch(via_ran){...} statements all over the place. Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified. Note that SGs does not qualify for RAN abstraction: the SGs interface always remains with the MSC-A role, and SGs messages follow quite distinct semantics from the fairly similar GERAN and UTRAN. * MGW and RTP stream management So far, managing MGW endpoints via MGCP was tightly glued in-between GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP streams between different RAN peers by moving to object-oriented implementations: implement struct call_leg and struct rtp_stream with distinct FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose. Instead of implementing a sequence of events with code duplication for the RAN and CN sides, the idea is to manage each RTP stream separately by firing and receiving events as soon as codecs and RTP ports are negotiated, and letting the individual FSMs take care of the MGW management "asynchronously". The caller provides event IDs and an FSM instance that should be notified of RTP stream setup progress. Hence it becomes possible to reconnect RTP streams from one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP peers (inter-MSC Handover) without duplicating the MGCP code for each transition. The number of FSM implementations used for MGCP handling may seem a bit of an overkill. But in fact, the number of perspectives on RTP forwarding are far from trivial: - an MGW endpoint is an entity with N connections, and MGCP "sessions" for configuring them by talking to the MGW; - an RTP stream is a remote peer connected to one of the endpoint's connections, which is asynchronously notified of codec and RTP port choices; - a call leg is the higher level view on either an MT or MO side of a voice call, a combination of two RTP streams to forward between two remote peers. BSC MGW PBX CI CI [MGW-endpoint] [--rtp_stream--] [--rtp_stream--] [----------------call_leg----------------] * Use counts Introduce using the new osmo_use_count API added to libosmocore for this purpose. Each use token has a distinct name in the logging, which can be a globally constant name or ad-hoc, like the local __func__ string constant. Use in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count API. * FSM Timeouts Introduce using the new osmo_tdef API, which provides a common VTY implementation for all timer numbers, and FSM state transitions with the correct timeout. Originated in osmo-bsc, recently moved to libosmocore. Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore) Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore) Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore) Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp) I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw) Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw) I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw) Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
};
struct ran_handover_request {
const char *imsi;
const struct osmo_gsm48_classmark *classmark;
/* A Handover Request on GERAN-A sends separate IEs for
* - permitted algorithms, here composed from the a5_encryption_mask,
* - the key, here taken from chosen_encryption->key iff chosen_encryption is present,
* - the actually chosen algorithm ("Serving"), here taken from chosen_encryption->alg_id.
*/
struct {
struct gsm0808_channel_type *channel_type;
uint8_t a5_encryption_mask;
/*! chosen_encryption->alg_id is in encoded format:
* alg_id == 1 means A5/0 i.e. no encryption, alg_id == 4 means A5/3.
* alg_id == 0 means no such IE was present. */
struct geran_encr *chosen_encryption;
} geran;
struct gsm0808_cell_id cell_id_serving;
struct gsm0808_cell_id cell_id_target;
enum gsm0808_cause bssap_cause;
bool current_channel_type_1_present;
uint8_t current_channel_type_1;
enum gsm0808_permitted_speech speech_version_used;
const uint8_t *old_bss_to_new_bss_info_raw;
uint8_t old_bss_to_new_bss_info_raw_len;
struct osmo_sockaddr_str *rtp_ran_local;
struct gsm0808_speech_codec_list *codec_list_msc_preferred;
bool call_id_present;
uint32_t call_id;
const uint8_t *global_call_reference;
uint8_t global_call_reference_len;
};
struct ran_handover_request_ack {
const uint8_t *rr_ho_command;
uint8_t rr_ho_command_len;
bool chosen_channel_present;
uint8_t chosen_channel;
/*! chosen_encr_alg is in encoded format:
* chosen_encr_alg == 1 means A5/0 i.e. no encryption, chosen_encr_alg == 4 means A5/3.
* chosen_encr_alg == 0 means no such IE was present. */
uint8_t chosen_encr_alg;
/* chosen_speech_version == 0 means "not present" */
enum gsm0808_permitted_speech chosen_speech_version;
struct osmo_sockaddr_str remote_rtp;
bool codec_present;
enum mgcp_codecs codec;
};
struct ran_handover_command {
const uint8_t *rr_ho_command;
uint8_t rr_ho_command_len;
const uint8_t *new_bss_to_old_bss_info_raw;
uint8_t new_bss_to_old_bss_info_raw_len;
};
struct ran_handover_required {
uint16_t cause;
struct gsm0808_cell_id_list2 cil;
bool current_channel_type_1_present;
/*! See gsm0808_chosen_channel() */
uint8_t current_channel_type_1;
enum gsm0808_permitted_speech speech_version_used;
uint8_t *old_bss_to_new_bss_info_raw;
size_t old_bss_to_new_bss_info_raw_len;
};
struct ran_msg {
enum ran_msg_type msg_type;
/* Since different RAN implementations feed these messages, they should place here an implementation specific
* string constant to name the actual message (e.g. "BSSMAP Assignment Complete" vs. "RANAP RAB Assignment
* Response") */
const char *msg_name;
union {
struct {
const struct gsm0808_cell_id *cell_id;
const struct gsm0808_speech_codec_list *codec_list_bss_supported;
large refactoring: support inter-BSC and inter-MSC Handover 3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles: - MSC-A is responsible for managing subscribers, - MSC-I is the gateway to the RAN. - MSC-T is a second transitory gateway to another RAN during Handover. After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while the original MSC-A retains the responsibility of subscriber management. MSC-T exists in this patch but is not yet used, since Handover is only prepared for, not yet implemented. Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC roles. Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications: - all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc instance, - messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface (GSUP), - no call routing between MSC-A and -I via MNCC necessary. This is the largest code bomb I have submitted, ever. Out of principle, I apologize to everyone trying to read this as a whole. Unfortunately, I see no sense in trying to split this patch into smaller bits. It would be a huge amount of work to introduce these changes in separate chunks, especially if each should in turn be useful and pass all test suites. So, unfortunately, we are stuck with this code bomb. The following are some details and rationale for this rather huge refactoring: * separate MSC subscriber management from ran_conn struct ran_conn is reduced from the pivotal subscriber management entity it has been so far to a mere storage for an SCCP connection ID and an MSC subscriber reference. The new pivotal subscriber management entity is struct msc_a -- struct msub lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however use msc_a, since MSC-A is where all the interesting stuff happens. Before handover, msc_i is an FSM implementation that encodes to the local ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM implementation that instead forwards via/from GSUP. Same goes for the msc_a struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the msc_a->fi is an FSM implementation that merely forwards via/from GSUP. * New SCCP implementation for RAN access To be able to forward BSSAP and RANAP messages via the GSUP interface, the individual message layers need to be cleanly separated. The IuCS implementation used until now (iu_client from libosmo-ranap) did not provide this level of separation, and needed a complete rewrite. It was trivial to implement this in such a way that both BSSAP and RANAP can be handled by the same SCCP code, hence the new SCCP-RAN layer also replaces BSSAP handling. sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN connections. A set of callback functions provides implementation specific details. * RAN Abstraction (BSSAP vs. RANAP) The common SCCP implementation did set the theme for the remaining refactoring: make all other MSC code paths entirely RAN-implementation-agnostic. ran_infra.c provides data structures that list RAN implementation specifics, from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra pointer hence allows complete abstraction of RAN implementations: - managing connected RAN peers (BSC, RNC) in ran_peer.c, - classifying and de-/encoding RAN PDUs, - recording connected LACs and cell IDs and sending out Paging requests to matching RAN peers. * RAN RESET now also for RANAP ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide proper RESET handling, which it so far duly ignores. (TODO) * RAN de-/encoding abstraction The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP implementations transparently, but also to be able to optionally handle RAN on distinct levels. Before Handover, all RAN messages are handled by the MSC-A role. However, after an inter-MSC Handover, a standalone MSC-I will need to decode RAN PDUs, at least in order to manage Assignment of RTP streams between BSS/RNC and MNCC call forwarding. ran_msg.h provides a common API with abstraction for: - receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP or RANAP; - sending RAN events: ran_enc_msg is the counterpart to compose RAN messages that should be encoded to either BSSMAP or RANAP and passed down to the BSC/RNC and MS/UE. The RAN-specific implementations are completely contained by ran_msg_a.c and ran_msg_iu.c. In particular, Assignment and Ciphering have so far been distinct code paths for BSSAP and RANAP, with switch(via_ran){...} statements all over the place. Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified. Note that SGs does not qualify for RAN abstraction: the SGs interface always remains with the MSC-A role, and SGs messages follow quite distinct semantics from the fairly similar GERAN and UTRAN. * MGW and RTP stream management So far, managing MGW endpoints via MGCP was tightly glued in-between GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP streams between different RAN peers by moving to object-oriented implementations: implement struct call_leg and struct rtp_stream with distinct FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose. Instead of implementing a sequence of events with code duplication for the RAN and CN sides, the idea is to manage each RTP stream separately by firing and receiving events as soon as codecs and RTP ports are negotiated, and letting the individual FSMs take care of the MGW management "asynchronously". The caller provides event IDs and an FSM instance that should be notified of RTP stream setup progress. Hence it becomes possible to reconnect RTP streams from one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP peers (inter-MSC Handover) without duplicating the MGCP code for each transition. The number of FSM implementations used for MGCP handling may seem a bit of an overkill. But in fact, the number of perspectives on RTP forwarding are far from trivial: - an MGW endpoint is an entity with N connections, and MGCP "sessions" for configuring them by talking to the MGW; - an RTP stream is a remote peer connected to one of the endpoint's connections, which is asynchronously notified of codec and RTP port choices; - a call leg is the higher level view on either an MT or MO side of a voice call, a combination of two RTP streams to forward between two remote peers. BSC MGW PBX CI CI [MGW-endpoint] [--rtp_stream--] [--rtp_stream--] [----------------call_leg----------------] * Use counts Introduce using the new osmo_use_count API added to libosmocore for this purpose. Each use token has a distinct name in the logging, which can be a globally constant name or ad-hoc, like the local __func__ string constant. Use in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count API. * FSM Timeouts Introduce using the new osmo_tdef API, which provides a common VTY implementation for all timer numbers, and FSM state transitions with the correct timeout. Originated in osmo-bsc, recently moved to libosmocore. Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore) Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore) Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore) Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp) I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw) Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw) I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw) Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
struct msgb *msg;
} compl_l3;
struct msgb *dtap;
struct {
enum gsm0808_cause bssap_cause;
#define RAN_MSG_BSSAP_CAUSE_UNSET 0xffff
} clear_request;
struct ran_clear_command clear_command;
struct {
const struct osmo_gsm48_classmark *classmark;
} classmark_update;
struct ran_cipher_mode_command cipher_mode_command;
struct {
/*! alg_id is in encoded format:
* alg_id == 1 means A5/0 i.e. no encryption, alg_id == 4 means A5/3.
* alg_id == 0 means no such IE was present. */
uint8_t alg_id;
/*! utran integrity protection. 0..15 */
int16_t utran_integrity;
/*! utran_integrity is in encoded format:
* utran_integrity == -1 means no such IE was present
* utran_integrity == 0 means no encryption. */
int16_t utran_encryption;
large refactoring: support inter-BSC and inter-MSC Handover 3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles: - MSC-A is responsible for managing subscribers, - MSC-I is the gateway to the RAN. - MSC-T is a second transitory gateway to another RAN during Handover. After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while the original MSC-A retains the responsibility of subscriber management. MSC-T exists in this patch but is not yet used, since Handover is only prepared for, not yet implemented. Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC roles. Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications: - all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc instance, - messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface (GSUP), - no call routing between MSC-A and -I via MNCC necessary. This is the largest code bomb I have submitted, ever. Out of principle, I apologize to everyone trying to read this as a whole. Unfortunately, I see no sense in trying to split this patch into smaller bits. It would be a huge amount of work to introduce these changes in separate chunks, especially if each should in turn be useful and pass all test suites. So, unfortunately, we are stuck with this code bomb. The following are some details and rationale for this rather huge refactoring: * separate MSC subscriber management from ran_conn struct ran_conn is reduced from the pivotal subscriber management entity it has been so far to a mere storage for an SCCP connection ID and an MSC subscriber reference. The new pivotal subscriber management entity is struct msc_a -- struct msub lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however use msc_a, since MSC-A is where all the interesting stuff happens. Before handover, msc_i is an FSM implementation that encodes to the local ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM implementation that instead forwards via/from GSUP. Same goes for the msc_a struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the msc_a->fi is an FSM implementation that merely forwards via/from GSUP. * New SCCP implementation for RAN access To be able to forward BSSAP and RANAP messages via the GSUP interface, the individual message layers need to be cleanly separated. The IuCS implementation used until now (iu_client from libosmo-ranap) did not provide this level of separation, and needed a complete rewrite. It was trivial to implement this in such a way that both BSSAP and RANAP can be handled by the same SCCP code, hence the new SCCP-RAN layer also replaces BSSAP handling. sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN connections. A set of callback functions provides implementation specific details. * RAN Abstraction (BSSAP vs. RANAP) The common SCCP implementation did set the theme for the remaining refactoring: make all other MSC code paths entirely RAN-implementation-agnostic. ran_infra.c provides data structures that list RAN implementation specifics, from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra pointer hence allows complete abstraction of RAN implementations: - managing connected RAN peers (BSC, RNC) in ran_peer.c, - classifying and de-/encoding RAN PDUs, - recording connected LACs and cell IDs and sending out Paging requests to matching RAN peers. * RAN RESET now also for RANAP ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide proper RESET handling, which it so far duly ignores. (TODO) * RAN de-/encoding abstraction The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP implementations transparently, but also to be able to optionally handle RAN on distinct levels. Before Handover, all RAN messages are handled by the MSC-A role. However, after an inter-MSC Handover, a standalone MSC-I will need to decode RAN PDUs, at least in order to manage Assignment of RTP streams between BSS/RNC and MNCC call forwarding. ran_msg.h provides a common API with abstraction for: - receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP or RANAP; - sending RAN events: ran_enc_msg is the counterpart to compose RAN messages that should be encoded to either BSSMAP or RANAP and passed down to the BSC/RNC and MS/UE. The RAN-specific implementations are completely contained by ran_msg_a.c and ran_msg_iu.c. In particular, Assignment and Ciphering have so far been distinct code paths for BSSAP and RANAP, with switch(via_ran){...} statements all over the place. Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified. Note that SGs does not qualify for RAN abstraction: the SGs interface always remains with the MSC-A role, and SGs messages follow quite distinct semantics from the fairly similar GERAN and UTRAN. * MGW and RTP stream management So far, managing MGW endpoints via MGCP was tightly glued in-between GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP streams between different RAN peers by moving to object-oriented implementations: implement struct call_leg and struct rtp_stream with distinct FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose. Instead of implementing a sequence of events with code duplication for the RAN and CN sides, the idea is to manage each RTP stream separately by firing and receiving events as soon as codecs and RTP ports are negotiated, and letting the individual FSMs take care of the MGW management "asynchronously". The caller provides event IDs and an FSM instance that should be notified of RTP stream setup progress. Hence it becomes possible to reconnect RTP streams from one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP peers (inter-MSC Handover) without duplicating the MGCP code for each transition. The number of FSM implementations used for MGCP handling may seem a bit of an overkill. But in fact, the number of perspectives on RTP forwarding are far from trivial: - an MGW endpoint is an entity with N connections, and MGCP "sessions" for configuring them by talking to the MGW; - an RTP stream is a remote peer connected to one of the endpoint's connections, which is asynchronously notified of codec and RTP port choices; - a call leg is the higher level view on either an MT or MO side of a voice call, a combination of two RTP streams to forward between two remote peers. BSC MGW PBX CI CI [MGW-endpoint] [--rtp_stream--] [--rtp_stream--] [----------------call_leg----------------] * Use counts Introduce using the new osmo_use_count API added to libosmocore for this purpose. Each use token has a distinct name in the logging, which can be a globally constant name or ad-hoc, like the local __func__ string constant. Use in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count API. * FSM Timeouts Introduce using the new osmo_tdef API, which provides a common VTY implementation for all timer numbers, and FSM state transitions with the correct timeout. Originated in osmo-bsc, recently moved to libosmocore. Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore) Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore) Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore) Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp) I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw) Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw) I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw) Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
const char *imeisv;
fix error on BSSMAP Cipher Mode Complete L3 msg IE When an MS returns the IMEISV in the BSSMAP Cipher Mode Complete message in the Layer 3 Message Contents IE, do not re-invoke the decode_cb() a second time, but instead point to it from the ran_msg.cipher_mode_complete struct. When the MSC-A decodes the Ciphering Mode Complete message, it always wants to also decode the enclosed DTAP from the Layer 3 Message Contents IE. However, when the MSC-I preliminarily decodes messages, it often just wants to identify specific messages without fully acting on them, let alone dispatching RAN_UP_L2 events more than once. So leave it up to the supplied decode_cb passed to ran_dec_l2() implementations to decide whether to decode the DTAP. In msc_a.c hence evaluate the DTAP by passing a msgb to msc_a_up_l3(), which will evaluate the RR Ciphering Mode Complete message found in the BSSMAP Cipher Mode Complete's Layer 3 Message Contents IE. Particularly, the previous choice of calling the decode_cb a second time for the enclosed DTAP caused a header/length parsing error: the second decode_cb call tried to mimick DTAP by overwriting the l3h pointer and truncating the length of the msgb, but subsequently ran_a_decode_l2() would again derive the l3h from the l2h, obliterating the intended re-interpretation as DTAP, and hence the previous truncation caused error messages on each and every Cipher Mode Complete message, like: DBSSAP ERROR libmsc/ran_msg_a.c:764 msc_a(IMSI-26242340300XXXX:MSISDN-XXXX:TMSI-0xA73E055A:GERAN-A-77923:LU)[0x5563947521e0]{MSC_A_ST_AUTH_CIPH}: RAN decode: BSSMAP: BSSMAP data truncated, discarding message This error was seen a lot at CCCamp2019. Modifying the msgb was a bad idea to begin with, the approach taken in this patch is much cleaner. Note that apparently many phones include the IMEISV in the Cipher Mode Complete message even though the BSSMAP Cipher Mode Command did not include the Cipher Response Mode IE. So, even though we did not specifically ask for the Cipher Mode Complete to include any identity, many MS default to including the IMEISV of their own accord. Reproduce: attach to osmo-msc with ciphering enabled using a Samsung Galaxy S4mini. Related: OS#4168 Change-Id: Icd8dad18d6dda24d075dd8da72c3d6db1302090d
2019-08-28 22:10:49 +00:00
const struct tlv_p_entry *l3_msg;
large refactoring: support inter-BSC and inter-MSC Handover 3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles: - MSC-A is responsible for managing subscribers, - MSC-I is the gateway to the RAN. - MSC-T is a second transitory gateway to another RAN during Handover. After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while the original MSC-A retains the responsibility of subscriber management. MSC-T exists in this patch but is not yet used, since Handover is only prepared for, not yet implemented. Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC roles. Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications: - all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc instance, - messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface (GSUP), - no call routing between MSC-A and -I via MNCC necessary. This is the largest code bomb I have submitted, ever. Out of principle, I apologize to everyone trying to read this as a whole. Unfortunately, I see no sense in trying to split this patch into smaller bits. It would be a huge amount of work to introduce these changes in separate chunks, especially if each should in turn be useful and pass all test suites. So, unfortunately, we are stuck with this code bomb. The following are some details and rationale for this rather huge refactoring: * separate MSC subscriber management from ran_conn struct ran_conn is reduced from the pivotal subscriber management entity it has been so far to a mere storage for an SCCP connection ID and an MSC subscriber reference. The new pivotal subscriber management entity is struct msc_a -- struct msub lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however use msc_a, since MSC-A is where all the interesting stuff happens. Before handover, msc_i is an FSM implementation that encodes to the local ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM implementation that instead forwards via/from GSUP. Same goes for the msc_a struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the msc_a->fi is an FSM implementation that merely forwards via/from GSUP. * New SCCP implementation for RAN access To be able to forward BSSAP and RANAP messages via the GSUP interface, the individual message layers need to be cleanly separated. The IuCS implementation used until now (iu_client from libosmo-ranap) did not provide this level of separation, and needed a complete rewrite. It was trivial to implement this in such a way that both BSSAP and RANAP can be handled by the same SCCP code, hence the new SCCP-RAN layer also replaces BSSAP handling. sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN connections. A set of callback functions provides implementation specific details. * RAN Abstraction (BSSAP vs. RANAP) The common SCCP implementation did set the theme for the remaining refactoring: make all other MSC code paths entirely RAN-implementation-agnostic. ran_infra.c provides data structures that list RAN implementation specifics, from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra pointer hence allows complete abstraction of RAN implementations: - managing connected RAN peers (BSC, RNC) in ran_peer.c, - classifying and de-/encoding RAN PDUs, - recording connected LACs and cell IDs and sending out Paging requests to matching RAN peers. * RAN RESET now also for RANAP ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide proper RESET handling, which it so far duly ignores. (TODO) * RAN de-/encoding abstraction The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP implementations transparently, but also to be able to optionally handle RAN on distinct levels. Before Handover, all RAN messages are handled by the MSC-A role. However, after an inter-MSC Handover, a standalone MSC-I will need to decode RAN PDUs, at least in order to manage Assignment of RTP streams between BSS/RNC and MNCC call forwarding. ran_msg.h provides a common API with abstraction for: - receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP or RANAP; - sending RAN events: ran_enc_msg is the counterpart to compose RAN messages that should be encoded to either BSSMAP or RANAP and passed down to the BSC/RNC and MS/UE. The RAN-specific implementations are completely contained by ran_msg_a.c and ran_msg_iu.c. In particular, Assignment and Ciphering have so far been distinct code paths for BSSAP and RANAP, with switch(via_ran){...} statements all over the place. Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified. Note that SGs does not qualify for RAN abstraction: the SGs interface always remains with the MSC-A role, and SGs messages follow quite distinct semantics from the fairly similar GERAN and UTRAN. * MGW and RTP stream management So far, managing MGW endpoints via MGCP was tightly glued in-between GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP streams between different RAN peers by moving to object-oriented implementations: implement struct call_leg and struct rtp_stream with distinct FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose. Instead of implementing a sequence of events with code duplication for the RAN and CN sides, the idea is to manage each RTP stream separately by firing and receiving events as soon as codecs and RTP ports are negotiated, and letting the individual FSMs take care of the MGW management "asynchronously". The caller provides event IDs and an FSM instance that should be notified of RTP stream setup progress. Hence it becomes possible to reconnect RTP streams from one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP peers (inter-MSC Handover) without duplicating the MGCP code for each transition. The number of FSM implementations used for MGCP handling may seem a bit of an overkill. But in fact, the number of perspectives on RTP forwarding are far from trivial: - an MGW endpoint is an entity with N connections, and MGCP "sessions" for configuring them by talking to the MGW; - an RTP stream is a remote peer connected to one of the endpoint's connections, which is asynchronously notified of codec and RTP port choices; - a call leg is the higher level view on either an MT or MO side of a voice call, a combination of two RTP streams to forward between two remote peers. BSC MGW PBX CI CI [MGW-endpoint] [--rtp_stream--] [--rtp_stream--] [----------------call_leg----------------] * Use counts Introduce using the new osmo_use_count API added to libosmocore for this purpose. Each use token has a distinct name in the logging, which can be a globally constant name or ad-hoc, like the local __func__ string constant. Use in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count API. * FSM Timeouts Introduce using the new osmo_tdef API, which provides a common VTY implementation for all timer numbers, and FSM state transitions with the correct timeout. Originated in osmo-bsc, recently moved to libosmocore. Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore) Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore) Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore) Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp) I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw) Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw) I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw) Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
} cipher_mode_complete;
struct {
enum gsm0808_cause bssap_cause;
} cipher_mode_reject;
struct {
const char *imsi;
bool last_eutran_plmn_present;
struct osmo_plmn_id last_eutran_plmn;
large refactoring: support inter-BSC and inter-MSC Handover 3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles: - MSC-A is responsible for managing subscribers, - MSC-I is the gateway to the RAN. - MSC-T is a second transitory gateway to another RAN during Handover. After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while the original MSC-A retains the responsibility of subscriber management. MSC-T exists in this patch but is not yet used, since Handover is only prepared for, not yet implemented. Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC roles. Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications: - all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc instance, - messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface (GSUP), - no call routing between MSC-A and -I via MNCC necessary. This is the largest code bomb I have submitted, ever. Out of principle, I apologize to everyone trying to read this as a whole. Unfortunately, I see no sense in trying to split this patch into smaller bits. It would be a huge amount of work to introduce these changes in separate chunks, especially if each should in turn be useful and pass all test suites. So, unfortunately, we are stuck with this code bomb. The following are some details and rationale for this rather huge refactoring: * separate MSC subscriber management from ran_conn struct ran_conn is reduced from the pivotal subscriber management entity it has been so far to a mere storage for an SCCP connection ID and an MSC subscriber reference. The new pivotal subscriber management entity is struct msc_a -- struct msub lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however use msc_a, since MSC-A is where all the interesting stuff happens. Before handover, msc_i is an FSM implementation that encodes to the local ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM implementation that instead forwards via/from GSUP. Same goes for the msc_a struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the msc_a->fi is an FSM implementation that merely forwards via/from GSUP. * New SCCP implementation for RAN access To be able to forward BSSAP and RANAP messages via the GSUP interface, the individual message layers need to be cleanly separated. The IuCS implementation used until now (iu_client from libosmo-ranap) did not provide this level of separation, and needed a complete rewrite. It was trivial to implement this in such a way that both BSSAP and RANAP can be handled by the same SCCP code, hence the new SCCP-RAN layer also replaces BSSAP handling. sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN connections. A set of callback functions provides implementation specific details. * RAN Abstraction (BSSAP vs. RANAP) The common SCCP implementation did set the theme for the remaining refactoring: make all other MSC code paths entirely RAN-implementation-agnostic. ran_infra.c provides data structures that list RAN implementation specifics, from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra pointer hence allows complete abstraction of RAN implementations: - managing connected RAN peers (BSC, RNC) in ran_peer.c, - classifying and de-/encoding RAN PDUs, - recording connected LACs and cell IDs and sending out Paging requests to matching RAN peers. * RAN RESET now also for RANAP ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide proper RESET handling, which it so far duly ignores. (TODO) * RAN de-/encoding abstraction The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP implementations transparently, but also to be able to optionally handle RAN on distinct levels. Before Handover, all RAN messages are handled by the MSC-A role. However, after an inter-MSC Handover, a standalone MSC-I will need to decode RAN PDUs, at least in order to manage Assignment of RTP streams between BSS/RNC and MNCC call forwarding. ran_msg.h provides a common API with abstraction for: - receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP or RANAP; - sending RAN events: ran_enc_msg is the counterpart to compose RAN messages that should be encoded to either BSSMAP or RANAP and passed down to the BSC/RNC and MS/UE. The RAN-specific implementations are completely contained by ran_msg_a.c and ran_msg_iu.c. In particular, Assignment and Ciphering have so far been distinct code paths for BSSAP and RANAP, with switch(via_ran){...} statements all over the place. Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified. Note that SGs does not qualify for RAN abstraction: the SGs interface always remains with the MSC-A role, and SGs messages follow quite distinct semantics from the fairly similar GERAN and UTRAN. * MGW and RTP stream management So far, managing MGW endpoints via MGCP was tightly glued in-between GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP streams between different RAN peers by moving to object-oriented implementations: implement struct call_leg and struct rtp_stream with distinct FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose. Instead of implementing a sequence of events with code duplication for the RAN and CN sides, the idea is to manage each RTP stream separately by firing and receiving events as soon as codecs and RTP ports are negotiated, and letting the individual FSMs take care of the MGW management "asynchronously". The caller provides event IDs and an FSM instance that should be notified of RTP stream setup progress. Hence it becomes possible to reconnect RTP streams from one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP peers (inter-MSC Handover) without duplicating the MGCP code for each transition. The number of FSM implementations used for MGCP handling may seem a bit of an overkill. But in fact, the number of perspectives on RTP forwarding are far from trivial: - an MGW endpoint is an entity with N connections, and MGCP "sessions" for configuring them by talking to the MGW; - an RTP stream is a remote peer connected to one of the endpoint's connections, which is asynchronously notified of codec and RTP port choices; - a call leg is the higher level view on either an MT or MO side of a voice call, a combination of two RTP streams to forward between two remote peers. BSC MGW PBX CI CI [MGW-endpoint] [--rtp_stream--] [--rtp_stream--] [----------------call_leg----------------] * Use counts Introduce using the new osmo_use_count API added to libosmocore for this purpose. Each use token has a distinct name in the logging, which can be a globally constant name or ad-hoc, like the local __func__ string constant. Use in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count API. * FSM Timeouts Introduce using the new osmo_tdef API, which provides a common VTY implementation for all timer numbers, and FSM state transitions with the correct timeout. Originated in osmo-bsc, recently moved to libosmocore. Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore) Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore) Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore) Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp) I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw) Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw) I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw) Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
} common_id;
struct {
enum gsm48_reject_value cause;
} cm_service_reject;
struct ran_assignment_command assignment_command;
struct {
struct osmo_sockaddr_str remote_rtp;
bool codec_present;
enum mgcp_codecs codec;
const struct gsm0808_speech_codec_list *codec_list_bss_supported;
bool osmux_present;
uint8_t osmux_cid;
large refactoring: support inter-BSC and inter-MSC Handover 3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles: - MSC-A is responsible for managing subscribers, - MSC-I is the gateway to the RAN. - MSC-T is a second transitory gateway to another RAN during Handover. After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while the original MSC-A retains the responsibility of subscriber management. MSC-T exists in this patch but is not yet used, since Handover is only prepared for, not yet implemented. Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC roles. Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications: - all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc instance, - messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface (GSUP), - no call routing between MSC-A and -I via MNCC necessary. This is the largest code bomb I have submitted, ever. Out of principle, I apologize to everyone trying to read this as a whole. Unfortunately, I see no sense in trying to split this patch into smaller bits. It would be a huge amount of work to introduce these changes in separate chunks, especially if each should in turn be useful and pass all test suites. So, unfortunately, we are stuck with this code bomb. The following are some details and rationale for this rather huge refactoring: * separate MSC subscriber management from ran_conn struct ran_conn is reduced from the pivotal subscriber management entity it has been so far to a mere storage for an SCCP connection ID and an MSC subscriber reference. The new pivotal subscriber management entity is struct msc_a -- struct msub lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however use msc_a, since MSC-A is where all the interesting stuff happens. Before handover, msc_i is an FSM implementation that encodes to the local ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM implementation that instead forwards via/from GSUP. Same goes for the msc_a struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the msc_a->fi is an FSM implementation that merely forwards via/from GSUP. * New SCCP implementation for RAN access To be able to forward BSSAP and RANAP messages via the GSUP interface, the individual message layers need to be cleanly separated. The IuCS implementation used until now (iu_client from libosmo-ranap) did not provide this level of separation, and needed a complete rewrite. It was trivial to implement this in such a way that both BSSAP and RANAP can be handled by the same SCCP code, hence the new SCCP-RAN layer also replaces BSSAP handling. sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN connections. A set of callback functions provides implementation specific details. * RAN Abstraction (BSSAP vs. RANAP) The common SCCP implementation did set the theme for the remaining refactoring: make all other MSC code paths entirely RAN-implementation-agnostic. ran_infra.c provides data structures that list RAN implementation specifics, from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra pointer hence allows complete abstraction of RAN implementations: - managing connected RAN peers (BSC, RNC) in ran_peer.c, - classifying and de-/encoding RAN PDUs, - recording connected LACs and cell IDs and sending out Paging requests to matching RAN peers. * RAN RESET now also for RANAP ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide proper RESET handling, which it so far duly ignores. (TODO) * RAN de-/encoding abstraction The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP implementations transparently, but also to be able to optionally handle RAN on distinct levels. Before Handover, all RAN messages are handled by the MSC-A role. However, after an inter-MSC Handover, a standalone MSC-I will need to decode RAN PDUs, at least in order to manage Assignment of RTP streams between BSS/RNC and MNCC call forwarding. ran_msg.h provides a common API with abstraction for: - receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP or RANAP; - sending RAN events: ran_enc_msg is the counterpart to compose RAN messages that should be encoded to either BSSMAP or RANAP and passed down to the BSC/RNC and MS/UE. The RAN-specific implementations are completely contained by ran_msg_a.c and ran_msg_iu.c. In particular, Assignment and Ciphering have so far been distinct code paths for BSSAP and RANAP, with switch(via_ran){...} statements all over the place. Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified. Note that SGs does not qualify for RAN abstraction: the SGs interface always remains with the MSC-A role, and SGs messages follow quite distinct semantics from the fairly similar GERAN and UTRAN. * MGW and RTP stream management So far, managing MGW endpoints via MGCP was tightly glued in-between GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP streams between different RAN peers by moving to object-oriented implementations: implement struct call_leg and struct rtp_stream with distinct FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose. Instead of implementing a sequence of events with code duplication for the RAN and CN sides, the idea is to manage each RTP stream separately by firing and receiving events as soon as codecs and RTP ports are negotiated, and letting the individual FSMs take care of the MGW management "asynchronously". The caller provides event IDs and an FSM instance that should be notified of RTP stream setup progress. Hence it becomes possible to reconnect RTP streams from one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP peers (inter-MSC Handover) without duplicating the MGCP code for each transition. The number of FSM implementations used for MGCP handling may seem a bit of an overkill. But in fact, the number of perspectives on RTP forwarding are far from trivial: - an MGW endpoint is an entity with N connections, and MGCP "sessions" for configuring them by talking to the MGW; - an RTP stream is a remote peer connected to one of the endpoint's connections, which is asynchronously notified of codec and RTP port choices; - a call leg is the higher level view on either an MT or MO side of a voice call, a combination of two RTP streams to forward between two remote peers. BSC MGW PBX CI CI [MGW-endpoint] [--rtp_stream--] [--rtp_stream--] [----------------call_leg----------------] * Use counts Introduce using the new osmo_use_count API added to libosmocore for this purpose. Each use token has a distinct name in the logging, which can be a globally constant name or ad-hoc, like the local __func__ string constant. Use in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count API. * FSM Timeouts Introduce using the new osmo_tdef API, which provides a common VTY implementation for all timer numbers, and FSM state transitions with the correct timeout. Originated in osmo-bsc, recently moved to libosmocore. Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore) Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore) Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore) Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp) I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw) Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw) I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw) Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
2018-12-07 13:47:34 +00:00
} assignment_complete;
struct {
enum gsm0808_cause bssap_cause;
uint8_t rr_cause;
const struct gsm0808_speech_codec_list *scl_bss_supported;
} assignment_failure;
struct {
enum gsm0808_cause bssap_cause;
uint8_t dlci;
} sapi_n_reject;
struct {
enum gsm0808_lcls_status status;
} lcls_status;
struct {
int todo;
} lcls_break_req;
struct ran_handover_required handover_required;
struct gsm0808_handover_required_reject handover_required_reject;
struct ran_handover_command handover_command;
struct {
enum gsm0808_cause cause;
} handover_failure;
struct ran_handover_request handover_request;
struct ran_handover_request_ack handover_request_ack;
};
};
/* MSC-A/I/T roles implement this to receive decoded NAS messages, upon feeding an L2 msgb to a ran_dec_l2_t matching the
* RAN type implementation. */
typedef int (* ran_decode_cb_t )(struct osmo_fsm_inst *caller_fi, void *caller_data, const struct ran_msg *msg);
struct ran_dec {
/* caller provided osmo_fsm_inst, used both for logging from within decoding of NAS events, as well as caller's
* context in decode_cb(). */
struct osmo_fsm_inst *caller_fi;
void *caller_data;
/* Callback receives the decoded NAS messages */
ran_decode_cb_t decode_cb;
};
/* NAS decoders (BSSAP/RANAP) implement this to turn a msgb into a struct ran_msg.
* An implementation typically calls ran_decoded() when done decoding.
* NAS decoding is modeled with a callback instead of a plain decoding, because some L2 messages by design contain more
* than one NAS event, e.g. Ciphering Mode Complete may include another L3 message for Identity Response, and LCLS
* Information messages can contain Status and Break Req events. */
typedef int (* ran_dec_l2_t )(struct ran_dec *ran_dec, struct msgb *l2);
int ran_decoded(struct ran_dec *ran_dec, struct ran_msg *msg);
/* An MSC-A/I/T role that receives NAS events containing DTAP buffers may use this to detect DTAP duplicates as in TS
* 24.007 11.2.3.2 Message Type Octet / Duplicate Detection */
bool ran_dec_dtap_undup_is_duplicate(struct osmo_fsm_inst *log_fi, uint8_t *n_sd_next, bool is_r99, struct msgb *l3);
/* Implemented by individual RAN implementations, see ran_a_encode() and ran_iu_encode(). */
typedef struct msgb *(* ran_encode_t )(struct osmo_fsm_inst *caller_fi, const struct ran_msg *ran_enc_msg);