1678 lines
76 KiB
XML
1678 lines
76 KiB
XML
<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>
|
|
<node id='_common_cmds_'>
|
|
<name>Common Commands</name>
|
|
<description>These commands are available on all VTY nodes. They are listed here only once, to unclutter the VTY reference.</description>
|
|
<command id='help'>
|
|
<params>
|
|
<param name='help' doc='Description of the interactive help system' />
|
|
</params>
|
|
</command>
|
|
<command id='list'>
|
|
<params>
|
|
<param name='list' doc='Print command list' />
|
|
</params>
|
|
</command>
|
|
<command id='write terminal'>
|
|
<params>
|
|
<param name='write' doc='Write running configuration to memory, network, or terminal' />
|
|
<param name='terminal' doc='Write to terminal' />
|
|
</params>
|
|
</command>
|
|
<command id='write file'>
|
|
<params>
|
|
<param name='write' doc='Write running configuration to memory, network, or terminal' />
|
|
<param name='file' doc='Write to configuration file' />
|
|
</params>
|
|
</command>
|
|
<command id='write memory'>
|
|
<params>
|
|
<param name='write' doc='Write running configuration to memory, network, or terminal' />
|
|
<param name='memory' doc='Write configuration to the file (same as write file)' />
|
|
</params>
|
|
</command>
|
|
<command id='write'>
|
|
<params>
|
|
<param name='write' doc='Write running configuration to memory, network, or terminal' />
|
|
</params>
|
|
</command>
|
|
<command id='show running-config'>
|
|
<params>
|
|
<param name='show' doc='Show running system information' />
|
|
<param name='running-config' doc='running configuration' />
|
|
</params>
|
|
</command>
|
|
<command id='exit'>
|
|
<params>
|
|
<param name='exit' doc='Exit current mode and down to previous mode' />
|
|
</params>
|
|
</command>
|
|
<command id='end'>
|
|
<params>
|
|
<param name='end' doc='End current mode and change to enable mode.' />
|
|
</params>
|
|
</command>
|
|
</node>
|
|
<node id='view'>
|
|
<name>view</name>
|
|
<command id='show version'>
|
|
<params>
|
|
<param name='show' doc='Show running system information' />
|
|
<param name='version' doc='Displays program version' />
|
|
</params>
|
|
</command>
|
|
<command id='show online-help'>
|
|
<params>
|
|
<param name='show' doc='Show running system information' />
|
|
<param name='online-help' doc='Online help' />
|
|
</params>
|
|
</command>
|
|
<command id='enable'>
|
|
<params>
|
|
<param name='enable' doc='Turn on privileged mode command' />
|
|
</params>
|
|
</command>
|
|
<command id='terminal length <0-512>'>
|
|
<params>
|
|
<param name='terminal' doc='Set terminal line parameters' />
|
|
<param name='length' doc='Set number of lines on a screen' />
|
|
<param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' />
|
|
</params>
|
|
</command>
|
|
<command id='terminal no length'>
|
|
<params>
|
|
<param name='terminal' doc='Set terminal line parameters' />
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='length' doc='Set number of lines on a screen' />
|
|
</params>
|
|
</command>
|
|
<command id='who'>
|
|
<params>
|
|
<param name='who' doc='Display who is on vty' />
|
|
</params>
|
|
</command>
|
|
<command id='show history'>
|
|
<params>
|
|
<param name='show' doc='Show running system information' />
|
|
<param name='history' doc='Display the session command history' />
|
|
</params>
|
|
</command>
|
|
<command id='logging enable'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='enable' doc='Enables logging to this vty' />
|
|
</params>
|
|
</command>
|
|
<command id='logging disable'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='disable' doc='Disables logging to this vty' />
|
|
</params>
|
|
</command>
|
|
<command id='logging filter all (0|1)'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='filter' doc='Filter log messages' />
|
|
<param name='all' doc='Do you want to log all messages?' />
|
|
<param name='0' doc='Only print messages matched by other filters' />
|
|
<param name='1' doc='Bypass filter and print all messages' />
|
|
</params>
|
|
</command>
|
|
<command id='logging color (0|1)'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='color' doc='Configure color-printing for log messages' />
|
|
<param name='0' doc='Don't use color for printing messages' />
|
|
<param name='1' doc='Use color for printing messages' />
|
|
</params>
|
|
</command>
|
|
<command id='logging timestamp (0|1)'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='timestamp' doc='Configure log message timestamping' />
|
|
<param name='0' doc='Don't prefix each log message' />
|
|
<param name='1' doc='Prefix each log message with current timestamp' />
|
|
</params>
|
|
</command>
|
|
<command id='logging print extended-timestamp (0|1)'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='print' doc='Log output settings' />
|
|
<param name='extended-timestamp' doc='Configure log message timestamping' />
|
|
<param name='0' doc='Don't prefix each log message' />
|
|
<param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
|
|
</params>
|
|
</command>
|
|
<command id='logging print category (0|1)'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='print' doc='Log output settings' />
|
|
<param name='category' doc='Configure log message' />
|
|
<param name='0' doc='Don't prefix each log message' />
|
|
<param name='1' doc='Prefix each log message with category/subsystem name' />
|
|
</params>
|
|
</command>
|
|
<command id='logging print category-hex (0|1)'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='print' doc='Log output settings' />
|
|
<param name='category-hex' doc='Configure log message' />
|
|
<param name='0' doc='Don't prefix each log message' />
|
|
<param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' />
|
|
</params>
|
|
</command>
|
|
<command id='logging print level (0|1)'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='print' doc='Log output settings' />
|
|
<param name='level' doc='Configure log message' />
|
|
<param name='0' doc='Don't prefix each log message' />
|
|
<param name='1' doc='Prefix each log message with the log level name' />
|
|
</params>
|
|
</command>
|
|
<command id='logging print file (0|1|basename) [last]'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='print' doc='Log output settings' />
|
|
<param name='file' doc='Configure log message' />
|
|
<param name='0' doc='Don't prefix each log message' />
|
|
<param name='1' doc='Prefix each log message with the source file and line' />
|
|
<param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' />
|
|
<param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
|
|
</params>
|
|
</command>
|
|
<command id='logging set-log-mask MASK'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='set-log-mask' doc='Set the logmask of this logging target' />
|
|
<param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
|
|
</params>
|
|
</command>
|
|
<command id='logging level (rtp|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='level' doc='Set the log level for a specified category' />
|
|
<param name='rtp' doc='RTP stream handling' />
|
|
<param name='lglobal' doc='Library-internal global log family' />
|
|
<param name='llapd' doc='LAPD in libosmogsm' />
|
|
<param name='linp' doc='A-bis Intput Subsystem' />
|
|
<param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
|
|
<param name='lmi' doc='A-bis Input Driver for Signalling' />
|
|
<param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
|
|
<param name='lsms' doc='Layer3 Short Message Service (SMS)' />
|
|
<param name='lctrl' doc='Control Interface' />
|
|
<param name='lgtp' doc='GPRS GTP library' />
|
|
<param name='lstats' doc='Statistics messages and logging' />
|
|
<param name='lgsup' doc='Generic Subscriber Update Protocol' />
|
|
<param name='loap' doc='Osmocom Authentication Protocol' />
|
|
<param name='lss7' doc='libosmo-sigtran Signalling System 7' />
|
|
<param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
|
|
<param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
|
|
<param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
|
|
<param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
|
|
<param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
|
|
<param name='lrspro' doc='Remote SIM protocol' />
|
|
<param name='debug' doc='Log debug messages and higher levels' />
|
|
<param name='info' doc='Log informational messages and higher levels' />
|
|
<param name='notice' doc='Log noticeable messages and higher levels' />
|
|
<param name='error' doc='Log error messages and higher levels' />
|
|
<param name='fatal' doc='Log only fatal messages' />
|
|
</params>
|
|
</command>
|
|
<command id='logging level set-all (debug|info|notice|error|fatal)'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='level' doc='Set the log level for a specified category' />
|
|
<param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
|
|
<param name='debug' doc='Log debug messages and higher levels' />
|
|
<param name='info' doc='Log informational messages and higher levels' />
|
|
<param name='notice' doc='Log noticeable messages and higher levels' />
|
|
<param name='error' doc='Log error messages and higher levels' />
|
|
<param name='fatal' doc='Log only fatal messages' />
|
|
</params>
|
|
</command>
|
|
<command id='logging level force-all (debug|info|notice|error|fatal)'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='level' doc='Set the log level for a specified category' />
|
|
<param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' />
|
|
<param name='debug' doc='Log debug messages and higher levels' />
|
|
<param name='info' doc='Log informational messages and higher levels' />
|
|
<param name='notice' doc='Log noticeable messages and higher levels' />
|
|
<param name='error' doc='Log error messages and higher levels' />
|
|
<param name='fatal' doc='Log only fatal messages' />
|
|
</params>
|
|
</command>
|
|
<command id='no logging level force-all'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='level' doc='Set the log level for a specified category' />
|
|
<param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' />
|
|
</params>
|
|
</command>
|
|
<command id='show logging vty'>
|
|
<params>
|
|
<param name='show' doc='Show running system information' />
|
|
<param name='logging' doc='Show current logging configuration' />
|
|
<param name='vty' doc='Show current logging configuration for this vty' />
|
|
</params>
|
|
</command>
|
|
<command id='show alarms'>
|
|
<params>
|
|
<param name='show' doc='Show running system information' />
|
|
<param name='alarms' doc='Show current logging configuration' />
|
|
</params>
|
|
</command>
|
|
<command id='show talloc-context (application|all) (full|brief|DEPTH)'>
|
|
<params>
|
|
<param name='show' doc='Show running system information' />
|
|
<param name='talloc-context' doc='Show talloc memory hierarchy' />
|
|
<param name='application' doc='Application's context' />
|
|
<param name='all' doc='All contexts, if NULL-context tracking is enabled' />
|
|
<param name='full' doc='Display a full talloc memory hierarchy' />
|
|
<param name='brief' doc='Display a brief talloc memory hierarchy' />
|
|
<param name='DEPTH' doc='Specify required maximal depth value' />
|
|
</params>
|
|
</command>
|
|
<command id='show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS'>
|
|
<params>
|
|
<param name='show' doc='Show running system information' />
|
|
<param name='talloc-context' doc='Show talloc memory hierarchy' />
|
|
<param name='application' doc='Application's context' />
|
|
<param name='all' doc='All contexts, if NULL-context tracking is enabled' />
|
|
<param name='full' doc='Display a full talloc memory hierarchy' />
|
|
<param name='brief' doc='Display a brief talloc memory hierarchy' />
|
|
<param name='DEPTH' doc='Specify required maximal depth value' />
|
|
<param name='tree' doc='Display only a specific memory chunk' />
|
|
<param name='ADDRESS' doc='Chunk address (e.g. 0xdeadbeef)' />
|
|
</params>
|
|
</command>
|
|
<command id='show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP'>
|
|
<params>
|
|
<param name='show' doc='Show running system information' />
|
|
<param name='talloc-context' doc='Show talloc memory hierarchy' />
|
|
<param name='application' doc='Application's context' />
|
|
<param name='all' doc='All contexts, if NULL-context tracking is enabled' />
|
|
<param name='full' doc='Display a full talloc memory hierarchy' />
|
|
<param name='brief' doc='Display a brief talloc memory hierarchy' />
|
|
<param name='DEPTH' doc='Specify required maximal depth value' />
|
|
<param name='filter' doc='Filter chunks using regular expression' />
|
|
<param name='REGEXP' doc='Regular expression' />
|
|
</params>
|
|
</command>
|
|
<command id='show stats'>
|
|
<params>
|
|
<param name='show' doc='Show running system information' />
|
|
<param name='stats' doc='Show statistical values' />
|
|
</params>
|
|
</command>
|
|
<command id='show stats level (global|peer|subscriber)'>
|
|
<params>
|
|
<param name='show' doc='Show running system information' />
|
|
<param name='stats' doc='Show statistical values' />
|
|
<param name='level' doc='Set the maximum group level' />
|
|
<param name='global' doc='Show global groups only' />
|
|
<param name='peer' doc='Show global and network peer related groups' />
|
|
<param name='subscriber' doc='Show global, peer, and subscriber groups' />
|
|
</params>
|
|
</command>
|
|
<command id='show asciidoc counters'>
|
|
<params>
|
|
<param name='show' doc='Show running system information' />
|
|
<param name='asciidoc' doc='Asciidoc generation' />
|
|
<param name='counters' doc='Generate table of all registered counters' />
|
|
</params>
|
|
</command>
|
|
<command id='show rate-counters'>
|
|
<params>
|
|
<param name='show' doc='Show running system information' />
|
|
<param name='rate-counters' doc='Show all rate counters' />
|
|
</params>
|
|
</command>
|
|
<command id='show mgcp [stats]'>
|
|
<params>
|
|
<param name='show' doc='Show running system information' />
|
|
<param name='mgcp' doc='Display information about the MGCP Media Gateway' />
|
|
<param name='[stats]' doc='Include Statistics' />
|
|
</params>
|
|
</command>
|
|
<command id='show mgcp endpoint NAME'>
|
|
<params>
|
|
<param name='show' doc='Show running system information' />
|
|
<param name='mgcp' doc='Display information about the MGCP Media Gateway' />
|
|
<param name='endpoint' doc='Display information about an endpoint' />
|
|
<param name='NAME' doc='The name of the endpoint' />
|
|
</params>
|
|
</command>
|
|
<command id='show mgcp trunk <0-64> endpoint NAME'>
|
|
<params>
|
|
<param name='show' doc='Show running system information' />
|
|
<param name='mgcp' doc='Display information about the MGCP Media Gateway' />
|
|
<param name='trunk' doc='Display information about a trunk' />
|
|
<param name='<0-64>' doc='Trunk number' />
|
|
<param name='endpoint' doc='Display information about an endpoint' />
|
|
<param name='NAME' doc='The name of the endpoint' />
|
|
</params>
|
|
</command>
|
|
</node>
|
|
<node id='enable'>
|
|
<name>enable</name>
|
|
<command id='disable'>
|
|
<params>
|
|
<param name='disable' doc='Turn off privileged mode command' />
|
|
</params>
|
|
</command>
|
|
<command id='configure terminal'>
|
|
<params>
|
|
<param name='configure' doc='Configuration from vty interface' />
|
|
<param name='terminal' doc='Configuration terminal' />
|
|
</params>
|
|
</command>
|
|
<command id='copy running-config startup-config'>
|
|
<params>
|
|
<param name='copy' doc='Copy configuration' />
|
|
<param name='running-config' doc='Copy running config to... ' />
|
|
<param name='startup-config' doc='Copy running config to startup config (same as write file)' />
|
|
</params>
|
|
</command>
|
|
<command id='show startup-config'>
|
|
<params>
|
|
<param name='show' doc='Show running system information' />
|
|
<param name='startup-config' doc='Contentes of startup configuration' />
|
|
</params>
|
|
</command>
|
|
<command id='show version'>
|
|
<params>
|
|
<param name='show' doc='Show running system information' />
|
|
<param name='version' doc='Displays program version' />
|
|
</params>
|
|
</command>
|
|
<command id='show online-help'>
|
|
<params>
|
|
<param name='show' doc='Show running system information' />
|
|
<param name='online-help' doc='Online help' />
|
|
</params>
|
|
</command>
|
|
<command id='terminal length <0-512>'>
|
|
<params>
|
|
<param name='terminal' doc='Set terminal line parameters' />
|
|
<param name='length' doc='Set number of lines on a screen' />
|
|
<param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' />
|
|
</params>
|
|
</command>
|
|
<command id='terminal no length'>
|
|
<params>
|
|
<param name='terminal' doc='Set terminal line parameters' />
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='length' doc='Set number of lines on a screen' />
|
|
</params>
|
|
</command>
|
|
<command id='who'>
|
|
<params>
|
|
<param name='who' doc='Display who is on vty' />
|
|
</params>
|
|
</command>
|
|
<command id='show history'>
|
|
<params>
|
|
<param name='show' doc='Show running system information' />
|
|
<param name='history' doc='Display the session command history' />
|
|
</params>
|
|
</command>
|
|
<command id='terminal monitor'>
|
|
<params>
|
|
<param name='terminal' doc='Set terminal line parameters' />
|
|
<param name='monitor' doc='Copy debug output to the current terminal line' />
|
|
</params>
|
|
</command>
|
|
<command id='terminal no monitor'>
|
|
<params>
|
|
<param name='terminal' doc='Set terminal line parameters' />
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='monitor' doc='Copy debug output to the current terminal line' />
|
|
</params>
|
|
</command>
|
|
<command id='logging enable'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='enable' doc='Enables logging to this vty' />
|
|
</params>
|
|
</command>
|
|
<command id='logging disable'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='disable' doc='Disables logging to this vty' />
|
|
</params>
|
|
</command>
|
|
<command id='logging filter all (0|1)'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='filter' doc='Filter log messages' />
|
|
<param name='all' doc='Do you want to log all messages?' />
|
|
<param name='0' doc='Only print messages matched by other filters' />
|
|
<param name='1' doc='Bypass filter and print all messages' />
|
|
</params>
|
|
</command>
|
|
<command id='logging color (0|1)'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='color' doc='Configure color-printing for log messages' />
|
|
<param name='0' doc='Don't use color for printing messages' />
|
|
<param name='1' doc='Use color for printing messages' />
|
|
</params>
|
|
</command>
|
|
<command id='logging timestamp (0|1)'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='timestamp' doc='Configure log message timestamping' />
|
|
<param name='0' doc='Don't prefix each log message' />
|
|
<param name='1' doc='Prefix each log message with current timestamp' />
|
|
</params>
|
|
</command>
|
|
<command id='logging print extended-timestamp (0|1)'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='print' doc='Log output settings' />
|
|
<param name='extended-timestamp' doc='Configure log message timestamping' />
|
|
<param name='0' doc='Don't prefix each log message' />
|
|
<param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
|
|
</params>
|
|
</command>
|
|
<command id='logging print category (0|1)'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='print' doc='Log output settings' />
|
|
<param name='category' doc='Configure log message' />
|
|
<param name='0' doc='Don't prefix each log message' />
|
|
<param name='1' doc='Prefix each log message with category/subsystem name' />
|
|
</params>
|
|
</command>
|
|
<command id='logging print category-hex (0|1)'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='print' doc='Log output settings' />
|
|
<param name='category-hex' doc='Configure log message' />
|
|
<param name='0' doc='Don't prefix each log message' />
|
|
<param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' />
|
|
</params>
|
|
</command>
|
|
<command id='logging print level (0|1)'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='print' doc='Log output settings' />
|
|
<param name='level' doc='Configure log message' />
|
|
<param name='0' doc='Don't prefix each log message' />
|
|
<param name='1' doc='Prefix each log message with the log level name' />
|
|
</params>
|
|
</command>
|
|
<command id='logging print file (0|1|basename) [last]'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='print' doc='Log output settings' />
|
|
<param name='file' doc='Configure log message' />
|
|
<param name='0' doc='Don't prefix each log message' />
|
|
<param name='1' doc='Prefix each log message with the source file and line' />
|
|
<param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' />
|
|
<param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
|
|
</params>
|
|
</command>
|
|
<command id='logging set-log-mask MASK'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='set-log-mask' doc='Set the logmask of this logging target' />
|
|
<param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
|
|
</params>
|
|
</command>
|
|
<command id='logging level (rtp|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='level' doc='Set the log level for a specified category' />
|
|
<param name='rtp' doc='RTP stream handling' />
|
|
<param name='lglobal' doc='Library-internal global log family' />
|
|
<param name='llapd' doc='LAPD in libosmogsm' />
|
|
<param name='linp' doc='A-bis Intput Subsystem' />
|
|
<param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
|
|
<param name='lmi' doc='A-bis Input Driver for Signalling' />
|
|
<param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
|
|
<param name='lsms' doc='Layer3 Short Message Service (SMS)' />
|
|
<param name='lctrl' doc='Control Interface' />
|
|
<param name='lgtp' doc='GPRS GTP library' />
|
|
<param name='lstats' doc='Statistics messages and logging' />
|
|
<param name='lgsup' doc='Generic Subscriber Update Protocol' />
|
|
<param name='loap' doc='Osmocom Authentication Protocol' />
|
|
<param name='lss7' doc='libosmo-sigtran Signalling System 7' />
|
|
<param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
|
|
<param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
|
|
<param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
|
|
<param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
|
|
<param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
|
|
<param name='lrspro' doc='Remote SIM protocol' />
|
|
<param name='debug' doc='Log debug messages and higher levels' />
|
|
<param name='info' doc='Log informational messages and higher levels' />
|
|
<param name='notice' doc='Log noticeable messages and higher levels' />
|
|
<param name='error' doc='Log error messages and higher levels' />
|
|
<param name='fatal' doc='Log only fatal messages' />
|
|
</params>
|
|
</command>
|
|
<command id='logging level set-all (debug|info|notice|error|fatal)'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='level' doc='Set the log level for a specified category' />
|
|
<param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
|
|
<param name='debug' doc='Log debug messages and higher levels' />
|
|
<param name='info' doc='Log informational messages and higher levels' />
|
|
<param name='notice' doc='Log noticeable messages and higher levels' />
|
|
<param name='error' doc='Log error messages and higher levels' /> <param name='fatal' doc='Log only fatal messages' />
|
|
</params>
|
|
</command>
|
|
<command id='logging level force-all (debug|info|notice|error|fatal)'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='level' doc='Set the log level for a specified category' />
|
|
<param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' />
|
|
<param name='debug' doc='Log debug messages and higher levels' />
|
|
<param name='info' doc='Log informational messages and higher levels' />
|
|
<param name='notice' doc='Log noticeable messages and higher levels' />
|
|
<param name='error' doc='Log error messages and higher levels' />
|
|
<param name='fatal' doc='Log only fatal messages' />
|
|
</params>
|
|
</command>
|
|
<command id='no logging level force-all'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='level' doc='Set the log level for a specified category' />
|
|
<param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' />
|
|
</params>
|
|
</command>
|
|
<command id='show logging vty'>
|
|
<params>
|
|
<param name='show' doc='Show running system information' />
|
|
<param name='logging' doc='Show current logging configuration' />
|
|
<param name='vty' doc='Show current logging configuration for this vty' />
|
|
</params>
|
|
</command>
|
|
<command id='show alarms'>
|
|
<params>
|
|
<param name='show' doc='Show running system information' />
|
|
<param name='alarms' doc='Show current logging configuration' />
|
|
</params>
|
|
</command>
|
|
<command id='show talloc-context (application|all) (full|brief|DEPTH)'>
|
|
<params>
|
|
<param name='show' doc='Show running system information' />
|
|
<param name='talloc-context' doc='Show talloc memory hierarchy' />
|
|
<param name='application' doc='Application's context' />
|
|
<param name='all' doc='All contexts, if NULL-context tracking is enabled' />
|
|
<param name='full' doc='Display a full talloc memory hierarchy' />
|
|
<param name='brief' doc='Display a brief talloc memory hierarchy' />
|
|
<param name='DEPTH' doc='Specify required maximal depth value' />
|
|
</params>
|
|
</command>
|
|
<command id='show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS'>
|
|
<params>
|
|
<param name='show' doc='Show running system information' />
|
|
<param name='talloc-context' doc='Show talloc memory hierarchy' />
|
|
<param name='application' doc='Application's context' />
|
|
<param name='all' doc='All contexts, if NULL-context tracking is enabled' />
|
|
<param name='full' doc='Display a full talloc memory hierarchy' />
|
|
<param name='brief' doc='Display a brief talloc memory hierarchy' />
|
|
<param name='DEPTH' doc='Specify required maximal depth value' />
|
|
<param name='tree' doc='Display only a specific memory chunk' />
|
|
<param name='ADDRESS' doc='Chunk address (e.g. 0xdeadbeef)' />
|
|
</params>
|
|
</command>
|
|
<command id='show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP'>
|
|
<params>
|
|
<param name='show' doc='Show running system information' />
|
|
<param name='talloc-context' doc='Show talloc memory hierarchy' />
|
|
<param name='application' doc='Application's context' />
|
|
<param name='all' doc='All contexts, if NULL-context tracking is enabled' />
|
|
<param name='full' doc='Display a full talloc memory hierarchy' />
|
|
<param name='brief' doc='Display a brief talloc memory hierarchy' />
|
|
<param name='DEPTH' doc='Specify required maximal depth value' />
|
|
<param name='filter' doc='Filter chunks using regular expression' />
|
|
<param name='REGEXP' doc='Regular expression' />
|
|
</params>
|
|
</command>
|
|
<command id='show stats'>
|
|
<params>
|
|
<param name='show' doc='Show running system information' />
|
|
<param name='stats' doc='Show statistical values' />
|
|
</params>
|
|
</command>
|
|
<command id='show stats level (global|peer|subscriber)'>
|
|
<params>
|
|
<param name='show' doc='Show running system information' />
|
|
<param name='stats' doc='Show statistical values' />
|
|
<param name='level' doc='Set the maximum group level' />
|
|
<param name='global' doc='Show global groups only' />
|
|
<param name='peer' doc='Show global and network peer related groups' />
|
|
<param name='subscriber' doc='Show global, peer, and subscriber groups' />
|
|
</params>
|
|
</command>
|
|
<command id='show asciidoc counters'>
|
|
<params>
|
|
<param name='show' doc='Show running system information' />
|
|
<param name='asciidoc' doc='Asciidoc generation' />
|
|
<param name='counters' doc='Generate table of all registered counters' />
|
|
</params>
|
|
</command>
|
|
<command id='show rate-counters'>
|
|
<params>
|
|
<param name='show' doc='Show running system information' />
|
|
<param name='rate-counters' doc='Show all rate counters' />
|
|
</params>
|
|
</command>
|
|
<command id='show mgcp [stats]'>
|
|
<params>
|
|
<param name='show' doc='Show running system information' />
|
|
<param name='mgcp' doc='Display information about the MGCP Media Gateway' />
|
|
<param name='[stats]' doc='Include Statistics' />
|
|
</params>
|
|
</command>
|
|
<command id='show mgcp endpoint NAME'>
|
|
<params>
|
|
<param name='show' doc='Show running system information' />
|
|
<param name='mgcp' doc='Display information about the MGCP Media Gateway' />
|
|
<param name='endpoint' doc='Display information about an endpoint' />
|
|
<param name='NAME' doc='The name of the endpoint' />
|
|
</params>
|
|
</command>
|
|
<command id='show mgcp trunk <0-64> endpoint NAME'>
|
|
<params>
|
|
<param name='show' doc='Show running system information' />
|
|
<param name='mgcp' doc='Display information about the MGCP Media Gateway' />
|
|
<param name='trunk' doc='Display information about a trunk' />
|
|
<param name='<0-64>' doc='Trunk number' />
|
|
<param name='endpoint' doc='Display information about an endpoint' />
|
|
<param name='NAME' doc='The name of the endpoint' />
|
|
</params>
|
|
</command>
|
|
<command id='loop-endpoint <0-64> NAME (0|1)'>
|
|
<params>
|
|
<param name='loop-endpoint' doc='Loop a given endpoint' />
|
|
<param name='<0-64>' doc='Trunk number' />
|
|
<param name='NAME' doc='The name in hex of the endpoint' />
|
|
<param name='0' doc='Disable the loop' />
|
|
<param name='1' doc='Enable the loop' />
|
|
</params>
|
|
</command>
|
|
<command id='tap-rtp <0-64> ENDPOINT CONN (in|out) A.B.C.D <0-65534>'>
|
|
<params>
|
|
<param name='tap-rtp' doc='Forward data on endpoint to a different system' />
|
|
<param name='<0-64>' doc='Trunk number' />
|
|
<param name='ENDPOINT' doc='The endpoint in hex' />
|
|
<param name='CONN' doc='The connection id in hex' />
|
|
<param name='in' doc='Forward incoming data' />
|
|
<param name='out' doc='Forward leaving data' />
|
|
<param name='A.B.C.D' doc='destination IP of the data' />
|
|
<param name='<0-65534>' doc='destination port' />
|
|
</params>
|
|
</command>
|
|
<command id='free-endpoint <0-64> NUMBER'>
|
|
<params>
|
|
<param name='free-endpoint' doc='Free the given endpoint' />
|
|
<param name='<0-64>' doc='Trunk number' />
|
|
<param name='NUMBER' doc='Endpoint number in hex.' />
|
|
</params>
|
|
</command>
|
|
<command id='reset-endpoint <0-64> NUMBER'>
|
|
<params>
|
|
<param name='reset-endpoint' doc='Reset the given endpoint' />
|
|
<param name='<0-64>' doc='Trunk number' />
|
|
<param name='NUMBER' doc='Endpoint number in hex.' />
|
|
</params>
|
|
</command>
|
|
<command id='reset-all-endpoints'>
|
|
<params>
|
|
<param name='reset-all-endpoints' doc='Reset all endpoints' />
|
|
</params>
|
|
</command>
|
|
</node>
|
|
<node id='config'>
|
|
<name>config</name>
|
|
<command id='hostname WORD'>
|
|
<params>
|
|
<param name='hostname' doc='Set system's network name' />
|
|
<param name='WORD' doc='This system's network name' />
|
|
</params>
|
|
</command>
|
|
<command id='no hostname [HOSTNAME]'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='hostname' doc='Reset system's network name' />
|
|
<param name='[HOSTNAME]' doc='Host name of this router' />
|
|
</params>
|
|
</command>
|
|
<command id='password (8|) WORD'>
|
|
<params>
|
|
<param name='password' doc='Assign the terminal connection password' />
|
|
<param name='8' doc='Specifies a HIDDEN password will follow' />
|
|
<param name='' doc='dummy string ' />
|
|
<param name='WORD' doc='The HIDDEN line password string' />
|
|
</params>
|
|
</command>
|
|
<command id='password LINE'>
|
|
<params>
|
|
<param name='password' doc='Assign the terminal connection password' />
|
|
<param name='LINE' doc='The UNENCRYPTED (cleartext) line password' />
|
|
</params>
|
|
</command>
|
|
<command id='enable password (8|) WORD'>
|
|
<params>
|
|
<param name='enable' doc='Modify enable password parameters' />
|
|
<param name='password' doc='Assign the privileged level password' />
|
|
<param name='8' doc='Specifies a HIDDEN password will follow' />
|
|
<param name='' doc='dummy string ' />
|
|
<param name='WORD' doc='The HIDDEN 'enable' password string' />
|
|
</params>
|
|
</command>
|
|
<command id='enable password LINE'>
|
|
<params>
|
|
<param name='enable' doc='Modify enable password parameters' />
|
|
<param name='password' doc='Assign the privileged level password' />
|
|
<param name='LINE' doc='The UNENCRYPTED (cleartext) 'enable' password' />
|
|
</params>
|
|
</command>
|
|
<command id='no enable password'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='enable' doc='Modify enable password parameters' />
|
|
<param name='password' doc='Assign the privileged level password' />
|
|
</params>
|
|
</command>
|
|
<command id='banner motd default'>
|
|
<params>
|
|
<param name='banner' doc='Set banner string' />
|
|
<param name='motd' doc='Strings for motd' />
|
|
<param name='default' doc='Default string' />
|
|
</params>
|
|
</command>
|
|
<command id='banner motd file [FILE]'>
|
|
<params>
|
|
<param name='banner' doc='Set banner' />
|
|
<param name='motd' doc='Banner for motd' />
|
|
<param name='file' doc='Banner from a file' />
|
|
<param name='[FILE]' doc='Filename' />
|
|
</params>
|
|
</command>
|
|
<command id='no banner motd'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='banner' doc='Set banner string' />
|
|
<param name='motd' doc='Strings for motd' />
|
|
</params>
|
|
</command>
|
|
<command id='service terminal-length <0-512>'>
|
|
<params>
|
|
<param name='service' doc='Set up miscellaneous service' />
|
|
<param name='terminal-length' doc='System wide terminal length configuration' />
|
|
<param name='<0-512>' doc='Number of lines of VTY (0 means no line control)' />
|
|
</params>
|
|
</command>
|
|
<command id='no service terminal-length [<0-512>]'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='service' doc='Set up miscellaneous service' />
|
|
<param name='terminal-length' doc='System wide terminal length configuration' />
|
|
<param name='[<0-512>]' doc='Number of lines of VTY (0 means no line control)' />
|
|
</params>
|
|
</command>
|
|
<command id='line vty'>
|
|
<params>
|
|
<param name='line' doc='Configure a terminal line' />
|
|
<param name='vty' doc='Virtual terminal' />
|
|
</params>
|
|
</command>
|
|
<command id='service advanced-vty'>
|
|
<params>
|
|
<param name='service' doc='Set up miscellaneous service' />
|
|
<param name='advanced-vty' doc='Enable advanced mode vty interface' />
|
|
</params>
|
|
</command>
|
|
<command id='no service advanced-vty'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='service' doc='Set up miscellaneous service' />
|
|
<param name='advanced-vty' doc='Enable advanced mode vty interface' />
|
|
</params>
|
|
</command>
|
|
<command id='show history'>
|
|
<params>
|
|
<param name='show' doc='Show running system information' />
|
|
<param name='history' doc='Display the session command history' />
|
|
</params>
|
|
</command>
|
|
<command id='log stderr'>
|
|
<params>
|
|
<param name='log' doc='Configure logging sub-system' />
|
|
<param name='stderr' doc='Logging via STDERR of the process' />
|
|
</params>
|
|
</command>
|
|
<command id='no log stderr'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='log' doc='Configure logging sub-system' />
|
|
<param name='stderr' doc='Logging via STDERR of the process' />
|
|
</params>
|
|
</command>
|
|
<command id='log file .FILENAME'>
|
|
<params>
|
|
<param name='log' doc='Configure logging sub-system' />
|
|
<param name='file' doc='Logging to text file' />
|
|
<param name='.FILENAME' doc='Filename' />
|
|
</params>
|
|
</command>
|
|
<command id='no log file .FILENAME'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='log' doc='Configure logging sub-system' />
|
|
<param name='file' doc='Logging to text file' />
|
|
<param name='.FILENAME' doc='Filename' />
|
|
</params>
|
|
</command>
|
|
<command id='log alarms <2-32700>'>
|
|
<params>
|
|
<param name='log' doc='Configure logging sub-system' />
|
|
<param name='alarms' doc='Logging alarms to osmo_strrb' />
|
|
<param name='<2-32700>' doc='Maximum number of messages to log' />
|
|
</params>
|
|
</command>
|
|
<command id='no log alarms'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='log' doc='Configure logging sub-system' />
|
|
<param name='alarms' doc='Logging alarms to osmo_strrb' />
|
|
</params>
|
|
</command>
|
|
<command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'>
|
|
<params>
|
|
<param name='log' doc='Configure logging sub-system' />
|
|
<param name='syslog' doc='Logging via syslog' />
|
|
<param name='authpriv' doc='Security/authorization messages facility' />
|
|
<param name='cron' doc='Clock daemon (cron/at) facility' />
|
|
<param name='daemon' doc='General system daemon facility' />
|
|
<param name='ftp' doc='Ftp daemon facility' />
|
|
<param name='lpr' doc='Line printer facility' />
|
|
<param name='mail' doc='Mail facility' />
|
|
<param name='news' doc='News facility' />
|
|
<param name='user' doc='Generic facility' />
|
|
<param name='uucp' doc='UUCP facility' />
|
|
</params>
|
|
</command>
|
|
<command id='log syslog local <0-7>'>
|
|
<params>
|
|
<param name='log' doc='Configure logging sub-system' />
|
|
<param name='syslog' doc='Logging via syslog' />
|
|
<param name='local' doc='Syslog LOCAL facility' />
|
|
<param name='<0-7>' doc='Local facility number' />
|
|
</params>
|
|
</command>
|
|
<command id='no log syslog'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='log' doc='Configure logging sub-system' />
|
|
<param name='syslog' doc='Logging via syslog' />
|
|
</params>
|
|
</command>
|
|
<command id='log gsmtap [HOSTNAME]'>
|
|
<params>
|
|
<param name='log' doc='Configure logging sub-system' />
|
|
<param name='gsmtap' doc='Logging via GSMTAP' />
|
|
<param name='[HOSTNAME]' doc='Host name to send the GSMTAP logging to (UDP port 4729)' />
|
|
</params>
|
|
</command>
|
|
<command id='stats reporter statsd'>
|
|
<params>
|
|
<param name='stats' doc='Configure stats sub-system' />
|
|
<param name='reporter' doc='Configure a stats reporter' />
|
|
<param name='statsd' doc='Report to a STATSD server' />
|
|
</params>
|
|
</command>
|
|
<command id='no stats reporter statsd'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='stats' doc='Configure stats sub-system' />
|
|
<param name='reporter' doc='Configure a stats reporter' />
|
|
<param name='statsd' doc='Report to a STATSD server' />
|
|
</params>
|
|
</command>
|
|
<command id='stats reporter log'>
|
|
<params>
|
|
<param name='stats' doc='Configure stats sub-system' />
|
|
<param name='reporter' doc='Configure a stats reporter' />
|
|
<param name='log' doc='Report to the logger' />
|
|
</params>
|
|
</command>
|
|
<command id='no stats reporter log'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='stats' doc='Configure stats sub-system' />
|
|
<param name='reporter' doc='Configure a stats reporter' />
|
|
<param name='log' doc='Report to the logger' />
|
|
</params>
|
|
</command>
|
|
<command id='stats interval <1-65535>'>
|
|
<params>
|
|
<param name='stats' doc='Configure stats sub-system' />
|
|
<param name='interval' doc='Set the reporting interval' />
|
|
<param name='<1-65535>' doc='Interval in seconds' />
|
|
</params>
|
|
</command>
|
|
<command id='mgcp'>
|
|
<params>
|
|
<param name='mgcp' doc='Configure the MGCP' />
|
|
</params>
|
|
</command>
|
|
</node>
|
|
<node id='config-log'>
|
|
<name>config-log</name>
|
|
<command id='logging filter all (0|1)'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='filter' doc='Filter log messages' />
|
|
<param name='all' doc='Do you want to log all messages?' />
|
|
<param name='0' doc='Only print messages matched by other filters' />
|
|
<param name='1' doc='Bypass filter and print all messages' />
|
|
</params>
|
|
</command>
|
|
<command id='logging color (0|1)'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='color' doc='Configure color-printing for log messages' />
|
|
<param name='0' doc='Don't use color for printing messages' />
|
|
<param name='1' doc='Use color for printing messages' />
|
|
</params>
|
|
</command>
|
|
<command id='logging timestamp (0|1)'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='timestamp' doc='Configure log message timestamping' />
|
|
<param name='0' doc='Don't prefix each log message' />
|
|
<param name='1' doc='Prefix each log message with current timestamp' />
|
|
</params>
|
|
</command>
|
|
<command id='logging print extended-timestamp (0|1)'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='print' doc='Log output settings' />
|
|
<param name='extended-timestamp' doc='Configure log message timestamping' />
|
|
<param name='0' doc='Don't prefix each log message' />
|
|
<param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
|
|
</params>
|
|
</command>
|
|
<command id='logging print category (0|1)'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='print' doc='Log output settings' />
|
|
<param name='category' doc='Configure log message' />
|
|
<param name='0' doc='Don't prefix each log message' />
|
|
<param name='1' doc='Prefix each log message with category/subsystem name' />
|
|
</params>
|
|
</command>
|
|
<command id='logging print category-hex (0|1)'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='print' doc='Log output settings' />
|
|
<param name='category-hex' doc='Configure log message' />
|
|
<param name='0' doc='Don't prefix each log message' />
|
|
<param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' />
|
|
</params>
|
|
</command>
|
|
<command id='logging print level (0|1)'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='print' doc='Log output settings' />
|
|
<param name='level' doc='Configure log message' />
|
|
<param name='0' doc='Don't prefix each log message' />
|
|
<param name='1' doc='Prefix each log message with the log level name' />
|
|
</params>
|
|
</command>
|
|
<command id='logging print file (0|1|basename) [last]'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='print' doc='Log output settings' />
|
|
<param name='file' doc='Configure log message' />
|
|
<param name='0' doc='Don't prefix each log message' />
|
|
<param name='1' doc='Prefix each log message with the source file and line' />
|
|
<param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' />
|
|
<param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
|
|
</params>
|
|
</command>
|
|
<command id='logging level (rtp|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='level' doc='Set the log level for a specified category' />
|
|
<param name='rtp' doc='RTP stream handling' />
|
|
<param name='lglobal' doc='Library-internal global log family' />
|
|
<param name='llapd' doc='LAPD in libosmogsm' />
|
|
<param name='linp' doc='A-bis Intput Subsystem' />
|
|
<param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
|
|
<param name='lmi' doc='A-bis Input Driver for Signalling' />
|
|
<param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
|
|
<param name='lsms' doc='Layer3 Short Message Service (SMS)' />
|
|
<param name='lctrl' doc='Control Interface' />
|
|
<param name='lgtp' doc='GPRS GTP library' />
|
|
<param name='lstats' doc='Statistics messages and logging' />
|
|
<param name='lgsup' doc='Generic Subscriber Update Protocol' />
|
|
<param name='loap' doc='Osmocom Authentication Protocol' />
|
|
<param name='lss7' doc='libosmo-sigtran Signalling System 7' />
|
|
<param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
|
|
<param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
|
|
<param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
|
|
<param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
|
|
<param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
|
|
<param name='lrspro' doc='Remote SIM protocol' />
|
|
<param name='debug' doc='Log debug messages and higher levels' />
|
|
<param name='info' doc='Log informational messages and higher levels' />
|
|
<param name='notice' doc='Log noticeable messages and higher levels' />
|
|
<param name='error' doc='Log error messages and higher levels' />
|
|
<param name='fatal' doc='Log only fatal messages' />
|
|
</params>
|
|
</command>
|
|
<command id='logging level set-all (debug|info|notice|error|fatal)'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='level' doc='Set the log level for a specified category' />
|
|
<param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
|
|
<param name='debug' doc='Log debug messages and higher levels' />
|
|
<param name='info' doc='Log informational messages and higher levels' />
|
|
<param name='notice' doc='Log noticeable messages and higher levels' />
|
|
<param name='error' doc='Log error messages and higher levels' />
|
|
<param name='fatal' doc='Log only fatal messages' />
|
|
</params>
|
|
</command>
|
|
<command id='logging level force-all (debug|info|notice|error|fatal)'>
|
|
<params>
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='level' doc='Set the log level for a specified category' />
|
|
<param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' />
|
|
<param name='debug' doc='Log debug messages and higher levels' />
|
|
<param name='info' doc='Log informational messages and higher levels' />
|
|
<param name='notice' doc='Log noticeable messages and higher levels' />
|
|
<param name='error' doc='Log error messages and higher levels' />
|
|
<param name='fatal' doc='Log only fatal messages' />
|
|
</params>
|
|
</command>
|
|
<command id='no logging level force-all'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='logging' doc='Configure logging' />
|
|
<param name='level' doc='Set the log level for a specified category' />
|
|
<param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' />
|
|
</params>
|
|
</command>
|
|
</node>
|
|
<node id='config-stats'>
|
|
<name>config-stats</name>
|
|
<command id='local-ip ADDR'>
|
|
<params>
|
|
<param name='local-ip' doc='Set the IP address to which we bind locally' />
|
|
<param name='ADDR' doc='IP Address' />
|
|
</params>
|
|
</command>
|
|
<command id='no local-ip'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='local-ip' doc='Set the IP address to which we bind locally' />
|
|
</params>
|
|
</command>
|
|
<command id='remote-ip ADDR'>
|
|
<params>
|
|
<param name='remote-ip' doc='Set the remote IP address to which we connect' />
|
|
<param name='ADDR' doc='IP Address' />
|
|
</params>
|
|
</command>
|
|
<command id='remote-port <1-65535>'>
|
|
<params>
|
|
<param name='remote-port' doc='Set the remote port to which we connect' />
|
|
<param name='<1-65535>' doc='Remote port number' />
|
|
</params>
|
|
</command>
|
|
<command id='mtu <100-65535>'>
|
|
<params>
|
|
<param name='mtu' doc='Set the maximum packet size' />
|
|
<param name='<100-65535>' doc='Size in byte' />
|
|
</params>
|
|
</command>
|
|
<command id='no mtu'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='mtu' doc='Set the maximum packet size' />
|
|
</params>
|
|
</command>
|
|
<command id='prefix PREFIX'>
|
|
<params>
|
|
<param name='prefix' doc='Set the item name prefix' />
|
|
<param name='PREFIX' doc='The prefix string' />
|
|
</params>
|
|
</command>
|
|
<command id='no prefix'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='prefix' doc='Set the item name prefix' />
|
|
</params>
|
|
</command>
|
|
<command id='level (global|peer|subscriber)'>
|
|
<params>
|
|
<param name='level' doc='Set the maximum group level' />
|
|
<param name='global' doc='Report global groups only' />
|
|
<param name='peer' doc='Report global and network peer related groups' />
|
|
<param name='subscriber' doc='Report global, peer, and subscriber groups' />
|
|
</params>
|
|
</command>
|
|
<command id='enable'>
|
|
<params>
|
|
<param name='enable' doc='Enable the reporter' />
|
|
</params>
|
|
</command>
|
|
<command id='disable'>
|
|
<params>
|
|
<param name='disable' doc='Disable the reporter' />
|
|
</params>
|
|
</command>
|
|
</node>
|
|
<node id='config-line'>
|
|
<name>config-line</name>
|
|
<command id='login'>
|
|
<params>
|
|
<param name='login' doc='Enable password checking' />
|
|
</params>
|
|
</command>
|
|
<command id='no login'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='login' doc='Enable password checking' />
|
|
</params>
|
|
</command>
|
|
<command id='bind A.B.C.D [<0-65535>]'>
|
|
<params>
|
|
<param name='bind' doc='Accept VTY telnet connections on local interface' />
|
|
<param name='A.B.C.D' doc='Local interface IP address (default: 127.0.0.1)' />
|
|
<param name='[<0-65535>]' doc='Local TCP port number' />
|
|
</params>
|
|
</command>
|
|
</node>
|
|
<node id='config-mgcp'>
|
|
<name>config-mgcp</name>
|
|
<command id='local ip A.B.C.D'>
|
|
<params>
|
|
<param name='local' doc='Local options for the SDP record' />
|
|
<param name='ip' doc='IP information' />
|
|
<param name='A.B.C.D' doc='IPv4 Address to use in SDP record' />
|
|
</params>
|
|
</command>
|
|
<command id='bind ip A.B.C.D'>
|
|
<params>
|
|
<param name='bind' doc='Listen/Bind related socket option' />
|
|
<param name='ip' doc='IP information' />
|
|
<param name='A.B.C.D' doc='IPv4 Address to bind to' />
|
|
</params>
|
|
</command>
|
|
<command id='bind port <0-65534>'>
|
|
<params>
|
|
<param name='bind' doc='Listen/Bind related socket option' />
|
|
<param name='port' doc='Port information' />
|
|
<param name='<0-65534>' doc='UDP port to listen for MGCP messages' />
|
|
</params>
|
|
</command>
|
|
<command id='bind early (0|1)'>
|
|
<params>
|
|
<param name='bind' doc='Listen/Bind related socket option' />
|
|
<param name='early' doc='Bind local ports on start up' />
|
|
<param name='0' doc='Bind on demand' />
|
|
<param name='1' doc='Bind on startup' />
|
|
</params>
|
|
</command>
|
|
<command id='rtp port-range <1024-65534> <1025-65535>'>
|
|
<params>
|
|
<param name='rtp' doc='RTP configuration' />
|
|
<param name='port-range' doc='Range of ports to use for the NET side' />
|
|
<param name='<1024-65534>' doc='Start of the range of ports' />
|
|
<param name='<1025-65535>' doc='End of the range of ports' />
|
|
</params>
|
|
</command>
|
|
<command id='rtp bind-ip A.B.C.D'>
|
|
<params>
|
|
<param name='rtp' doc='RTP configuration' />
|
|
<param name='bind-ip' doc='Bind endpoints facing the Network' />
|
|
<param name='A.B.C.D' doc='Address to bind to' />
|
|
</params>
|
|
</command>
|
|
<command id='no rtp bind-ip'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='rtp' doc='RTP configuration' />
|
|
<param name='bind-ip' doc='Bind endpoints facing the Network' />
|
|
</params>
|
|
</command>
|
|
<command id='rtp ip-probing'>
|
|
<params>
|
|
<param name='rtp' doc='RTP configuration' />
|
|
<param name='ip-probing' doc='automatic rtp bind ip selection' />
|
|
</params>
|
|
</command>
|
|
<command id='no rtp ip-probing'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='rtp' doc='RTP configuration' />
|
|
<param name='ip-probing' doc='no automatic rtp bind ip selection' />
|
|
</params>
|
|
</command>
|
|
<command id='rtp ip-dscp <0-255>'>
|
|
<params>
|
|
<param name='rtp' doc='RTP configuration' />
|
|
<param name='ip-dscp' doc='Apply IP_TOS to the audio stream (including Osmux)' />
|
|
<param name='<0-255>' doc='The DSCP value' />
|
|
</params>
|
|
</command>
|
|
<command id='rtp force-ptime (10|20|40)'>
|
|
<params>
|
|
<param name='rtp' doc='RTP configuration' />
|
|
<param name='force-ptime' doc='Force a fixed ptime for packets sentThe required ptime (packet duration) in ms' />
|
|
<param name='10' doc='10 ms' />
|
|
<param name='20' doc='20 ms' />
|
|
<param name='40' doc='40 ms' />
|
|
</params>
|
|
</command>
|
|
<command id='no rtp force-ptime'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='rtp' doc='RTP configuration' />
|
|
<param name='force-ptime' doc='Force a fixed ptime for packets sent' />
|
|
</params>
|
|
</command>
|
|
<command id='rtp keep-alive <1-120>'>
|
|
<params>
|
|
<param name='rtp' doc='RTP configuration' />
|
|
<param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' />
|
|
<param name='<1-120>' doc='Keep alive interval in secs' />
|
|
</params>
|
|
</command>
|
|
<command id='rtp keep-alive once'>
|
|
<params>
|
|
<param name='rtp' doc='RTP configuration' />
|
|
<param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' />
|
|
<param name='once' doc='Send dummy packet only once after CRCX/MDCX' />
|
|
</params>
|
|
</command>
|
|
<command id='no rtp keep-alive'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='rtp' doc='RTP configuration' />
|
|
<param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' />
|
|
</params>
|
|
</command>
|
|
<command id='call-agent ip A.B.C.D'>
|
|
<params>
|
|
<param name='call-agent' doc='Callagent information' />
|
|
<param name='ip' doc='IP information' />
|
|
<param name='A.B.C.D' doc='IPv4 Address of the callagent' />
|
|
</params>
|
|
</command>
|
|
<command id='sdp audio-payload number <0-255>'>
|
|
<params>
|
|
<param name='sdp' doc='SDP File related options' />
|
|
<param name='audio-payload' doc='Audio payload options' />
|
|
<param name='number' doc='Number' />
|
|
<param name='<0-255>' doc='Payload number' />
|
|
</params>
|
|
</command>
|
|
<command id='sdp audio-payload name NAME'>
|
|
<params>
|
|
<param name='sdp' doc='SDP File related options' />
|
|
<param name='audio-payload' doc='Audio payload options' />
|
|
<param name='name' doc='Name' />
|
|
<param name='NAME' doc='Payload name' />
|
|
</params>
|
|
</command>
|
|
<command id='loop (0|1)'>
|
|
<params>
|
|
<param name='loop' doc='Loop audio for all endpoints on main trunk' />
|
|
<param name='0' doc='Don't Loop' />
|
|
<param name='1' doc='Loop' />
|
|
</params>
|
|
</command>
|
|
<command id='force-realloc (0|1)'>
|
|
<params>
|
|
<param name='force-realloc' doc='Force endpoint reallocation when the endpoint is still seized' />
|
|
<param name='0' doc='Don't force reallocation' />
|
|
<param name='1' doc='force reallocation' />
|
|
</params>
|
|
</command>
|
|
<command id='rtp-accept-all (0|1)'>
|
|
<params>
|
|
<param name='rtp-accept-all' doc='Accept all RTP packets, even when the originating IP/Port does not match' />
|
|
<param name='0' doc='enable filter' />
|
|
<param name='1' doc='disable filter' />
|
|
</params>
|
|
</command>
|
|
<command id='number endpoints <0-65534>'>
|
|
<params>
|
|
<param name='number' doc='Number options' />
|
|
<param name='endpoints' doc='Endpoints available' />
|
|
<param name='<0-65534>' doc='Number endpoints' />
|
|
</params>
|
|
</command>
|
|
<command id='rtcp-omit'>
|
|
<params>
|
|
<param name='rtcp-omit' doc='Drop RTCP packets in both directions' />
|
|
</params>
|
|
</command>
|
|
<command id='no rtcp-omit'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='rtcp-omit' doc='Drop RTCP packets in both directions' />
|
|
</params>
|
|
</command>
|
|
<command id='rtp-patch ssrc'>
|
|
<params>
|
|
<param name='rtp-patch' doc='Modify RTP packet header in both directions' />
|
|
<param name='ssrc' doc='Force a fixed SSRC' />
|
|
</params>
|
|
</command>
|
|
<command id='no rtp-patch ssrc'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='rtp-patch' doc='Modify RTP packet header in both directions' />
|
|
<param name='ssrc' doc='Force a fixed SSRC' />
|
|
</params>
|
|
</command>
|
|
<command id='rtp-patch timestamp'>
|
|
<params>
|
|
<param name='rtp-patch' doc='Modify RTP packet header in both directions' />
|
|
<param name='timestamp' doc='Adjust RTP timestamp' />
|
|
</params>
|
|
</command>
|
|
<command id='no rtp-patch timestamp'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='rtp-patch' doc='Modify RTP packet header in both directions' />
|
|
<param name='timestamp' doc='Adjust RTP timestamp' />
|
|
</params>
|
|
</command>
|
|
<command id='no rtp-patch'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='rtp-patch' doc='Modify RTP packet header in both directions' />
|
|
</params>
|
|
</command>
|
|
<command id='rtp-patch rfc5993hr'>
|
|
<params>
|
|
<param name='rtp-patch' doc='Modify RTP packet header in both directions' />
|
|
<param name='rfc5993hr' doc='Convert GSM-HR from TS101318 to RFC5993 and vice versa' />
|
|
</params>
|
|
</command>
|
|
<command id='no rtp-patch rfc5993hr'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='rtp-patch' doc='Modify RTP packet header in both directions' />
|
|
<param name='rfc5993hr' doc='Convert GSM-HR from TS101318 to RFC5993 and vice versa' />
|
|
</params>
|
|
</command>
|
|
<command id='sdp audio fmtp-extra .NAME'>
|
|
<params>
|
|
<param name='sdp' doc='Add extra fmtp for the SDP file' />
|
|
<param name='audio' doc='Audio' />
|
|
<param name='fmtp-extra' doc='Fmtp-extra' />
|
|
<param name='.NAME' doc='Extra Information' />
|
|
</params>
|
|
</command>
|
|
<command id='sdp audio-payload send-ptime'>
|
|
<params>
|
|
<param name='sdp' doc='SDP File related options' />
|
|
<param name='audio-payload' doc='Audio payload options' />
|
|
<param name='send-ptime' doc='Send SDP ptime (packet duration) attribute' />
|
|
</params>
|
|
</command>
|
|
<command id='no sdp audio-payload send-ptime'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='sdp' doc='SDP File related options' />
|
|
<param name='audio-payload' doc='Audio payload options' />
|
|
<param name='send-ptime' doc='Send SDP ptime (packet duration) attribute' />
|
|
</params>
|
|
</command>
|
|
<command id='sdp audio-payload send-name'>
|
|
<params>
|
|
<param name='sdp' doc='SDP File related options' />
|
|
<param name='audio-payload' doc='Audio payload options' />
|
|
<param name='send-name' doc='Send SDP rtpmap with the audio name' />
|
|
</params>
|
|
</command>
|
|
<command id='no sdp audio-payload send-name'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='sdp' doc='SDP File related options' />
|
|
<param name='audio-payload' doc='Audio payload options' />
|
|
<param name='send-name' doc='Send SDP rtpmap with the audio name' />
|
|
</params>
|
|
</command>
|
|
<command id='osmux (on|off|only)'>
|
|
<params>
|
|
<param name='osmux' doc='RTP multiplexing' />
|
|
<param name='on' doc='Enable OSMUX' />
|
|
<param name='off' doc='Disable OSMUX' />
|
|
<param name='only' doc='Only use OSMUX' />
|
|
</params>
|
|
</command>
|
|
<command id='osmux bind-ip A.B.C.D'>
|
|
<params>
|
|
<param name='osmux' doc='RTP multiplexing' />
|
|
<param name='bind-ip' doc='IP information' />
|
|
<param name='A.B.C.D' doc='IPv4 Address to bind to' />
|
|
</params>
|
|
</command>
|
|
<command id='osmux batch-factor <1-8>'>
|
|
<params>
|
|
<param name='osmux' doc='RTP multiplexing' />
|
|
<param name='batch-factor' doc='Batching factor' />
|
|
<param name='<1-8>' doc='Number of messages in the batch' />
|
|
</params>
|
|
</command>
|
|
<command id='osmux batch-size <1-65535>'>
|
|
<params>
|
|
<param name='osmux' doc='RTP multiplexing' />
|
|
<param name='batch-size' doc='batch size' />
|
|
<param name='<1-65535>' doc='Batch size in bytes' />
|
|
</params>
|
|
</command>
|
|
<command id='osmux port <1-65535>'>
|
|
<params>
|
|
<param name='osmux' doc='RTP multiplexing' />
|
|
<param name='port' doc='port' />
|
|
<param name='<1-65535>' doc='UDP port' />
|
|
</params>
|
|
</command>
|
|
<command id='osmux dummy (on|off)'>
|
|
<params>
|
|
<param name='osmux' doc='RTP multiplexing' />
|
|
<param name='dummy' doc='Dummy padding' />
|
|
<param name='on' doc='Enable dummy padding' />
|
|
<param name='off' doc='Disable dummy padding' />
|
|
</params>
|
|
</command>
|
|
<command id='allow-transcoding'>
|
|
<params>
|
|
<param name='allow-transcoding' doc='Allow transcoding' />
|
|
</params>
|
|
</command>
|
|
<command id='no allow-transcoding'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='allow-transcoding' doc='Allow transcoding' />
|
|
</params>
|
|
</command>
|
|
<command id='domain NAME'>
|
|
<params>
|
|
<param name='domain' doc='Set the domain part expected in MGCP messages' endpoint names' />
|
|
<param name='NAME' doc='Qualified domain name expected in MGCP endpoint names, or '*' to accept any domain' />
|
|
</params>
|
|
</command>
|
|
<command id='conn-timeout <0-65534>'>
|
|
<params>
|
|
<param name='conn-timeout' doc='Set a time after which inactive connections (CIs) are closed. Set to 0 to disable timeout. This can be used to work around interoperability problems causing connections to stay open forever, and slowly exhausting all available ports. Enable keep-alive packets in MGW clients when using this option together with LCLS (OsmoBSC, OsmoMSC: 'rtp keep-alive')!' />
|
|
<param name='<0-65534>' doc='Timeout value (sec.)' />
|
|
</params>
|
|
</command>
|
|
<command id='trunk <1-64>'>
|
|
<params>
|
|
<param name='trunk' doc='Configure a SS7 trunk' />
|
|
<param name='<1-64>' doc='Trunk Nr' />
|
|
</params>
|
|
</command>
|
|
</node>
|
|
<node id='config-mgcp-trunk'>
|
|
<name>config-mgcp-trunk</name>
|
|
<command id='rtp keep-alive <1-120>'>
|
|
<params>
|
|
<param name='rtp' doc='RTP configuration' />
|
|
<param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' />
|
|
<param name='<1-120>' doc='Keep-alive interval in secs' />
|
|
</params>
|
|
</command>
|
|
<command id='rtp keep-alive once'>
|
|
<params>
|
|
<param name='rtp' doc='RTP configuration' />
|
|
<param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' />
|
|
<param name='once' doc='Send dummy packet only once after CRCX/MDCX' />
|
|
</params>
|
|
</command>
|
|
<command id='no rtp keep-alive'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='rtp' doc='RTP configuration' />
|
|
<param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' />
|
|
</params>
|
|
</command>
|
|
<command id='sdp audio-payload number <0-255>'>
|
|
<params>
|
|
<param name='sdp' doc='SDP File related options' />
|
|
<param name='audio-payload' doc='Audio payload options' />
|
|
<param name='number' doc='Number' />
|
|
<param name='<0-255>' doc='Payload Number' />
|
|
</params>
|
|
</command>
|
|
<command id='sdp audio-payload name NAME'>
|
|
<params>
|
|
<param name='sdp' doc='SDP File related options' />
|
|
<param name='audio-payload' doc='Audio payload options' />
|
|
<param name='name' doc='Payload' />
|
|
<param name='NAME' doc='Payload Name' />
|
|
</params>
|
|
</command>
|
|
<command id='loop (0|1)'>
|
|
<params>
|
|
<param name='loop' doc='Loop audio for all endpoints on this trunk' />
|
|
<param name='0' doc='Don't Loop' />
|
|
<param name='1' doc='Loop' />
|
|
</params>
|
|
</command>
|
|
<command id='rtcp-omit'>
|
|
<params>
|
|
<param name='rtcp-omit' doc='Drop RTCP packets in both directions' />
|
|
</params>
|
|
</command>
|
|
<command id='no rtcp-omit'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='rtcp-omit' doc='Drop RTCP packets in both directions' />
|
|
</params>
|
|
</command>
|
|
<command id='rtp-patch ssrc'>
|
|
<params>
|
|
<param name='rtp-patch' doc='Modify RTP packet header in both directions' />
|
|
<param name='ssrc' doc='Force a fixed SSRC' />
|
|
</params>
|
|
</command>
|
|
<command id='no rtp-patch ssrc'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='rtp-patch' doc='Modify RTP packet header in both directions' />
|
|
<param name='ssrc' doc='Force a fixed SSRC' />
|
|
</params>
|
|
</command>
|
|
<command id='rtp-patch timestamp'>
|
|
<params>
|
|
<param name='rtp-patch' doc='Modify RTP packet header in both directions' />
|
|
<param name='timestamp' doc='Adjust RTP timestamp' />
|
|
</params>
|
|
</command>
|
|
<command id='rtp-patch rfc5993hr'>
|
|
<params>
|
|
<param name='rtp-patch' doc='Modify RTP packet header in both directions' />
|
|
<param name='rfc5993hr' doc='Convert GSM-HR from TS101318 to RFC5993 and vice versa' />
|
|
</params>
|
|
</command>
|
|
<command id='no rtp-patch rfc5993hr'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='rtp-patch' doc='Modify RTP packet header in both directions' />
|
|
<param name='rfc5993hr' doc='Convert GSM-HR from TS101318 to RFC5993 and vice versa' />
|
|
</params>
|
|
</command>
|
|
<command id='no rtp-patch timestamp'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='rtp-patch' doc='Modify RTP packet header in both directions' />
|
|
<param name='timestamp' doc='Adjust RTP timestamp' />
|
|
</params>
|
|
</command>
|
|
<command id='no rtp-patch'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='rtp-patch' doc='Modify RTP packet header in both directions' />
|
|
</params>
|
|
</command>
|
|
<command id='sdp audio fmtp-extra .NAME'>
|
|
<params>
|
|
<param name='sdp' doc='Add extra fmtp for the SDP file' />
|
|
<param name='audio' doc='Audio' />
|
|
<param name='fmtp-extra' doc='Fmtp-extra' />
|
|
<param name='.NAME' doc='Extra Information' />
|
|
</params>
|
|
</command>
|
|
<command id='sdp audio-payload send-ptime'>
|
|
<params>
|
|
<param name='sdp' doc='SDP File related options' />
|
|
<param name='audio-payload' doc='Audio payload options' />
|
|
<param name='send-ptime' doc='Send SDP ptime (packet duration) attribute' />
|
|
</params>
|
|
</command>
|
|
<command id='no sdp audio-payload send-ptime'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='sdp' doc='SDP File related options' />
|
|
<param name='audio-payload' doc='Audio payload options' />
|
|
<param name='send-ptime' doc='Send SDP ptime (packet duration) attribute' />
|
|
</params>
|
|
</command>
|
|
<command id='sdp audio-payload send-name'>
|
|
<params>
|
|
<param name='sdp' doc='SDP File related options' />
|
|
<param name='audio-payload' doc='Audio payload options' />
|
|
<param name='send-name' doc='Send SDP rtpmap with the audio name' />
|
|
</params>
|
|
</command>
|
|
<command id='no sdp audio-payload send-name'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='sdp' doc='SDP File related options' />
|
|
<param name='audio-payload' doc='Audio payload options' />
|
|
<param name='send-name' doc='Send SDP rtpmap with the audio name' />
|
|
</params>
|
|
</command>
|
|
<command id='allow-transcoding'>
|
|
<params>
|
|
<param name='allow-transcoding' doc='Allow transcoding' />
|
|
</params>
|
|
</command>
|
|
<command id='no allow-transcoding'>
|
|
<params>
|
|
<param name='no' doc='Negate a command or set its defaults' />
|
|
<param name='allow-transcoding' doc='Allow transcoding' />
|
|
</params>
|
|
</command>
|
|
</node>
|
|
</vtydoc>
|