There is considerable code complexity in place for this ancient hack.
It dates back to 5ea1bc77a3
"
mgcp: Allow to freely control the a=fmtp line for experiments
In case of AMR one can specify the available codecs out-of-band. Allow
to configure this line statically in the configuration file.
"
Looking in mgcp_test.c output, the fmtp-extra tests do not even make
sense: they result in fmtp for pt=126 being added, even though there is
no payload type 126 listed in the SDP...
Related: OS#6313
Change-Id: Icee0cd1f5a751fa760d5a9deca29089e78e7eb93
Unfortunately OsmoMGW was never really tested with multiple different
codecs on either side of the connection. While OsmoMSC and OsmoBSC only
assign exactly one codec on each side this has never been a problem,
however it might become a problem when a call agent assigns multiple
codecs on one side. This has been observed in a setup where OsmoMGW had
one leg towards an external call agent. Also due to recent upgrades to
the TTCN3 tests we are now able to simulate different codecs on both
sides to pinpoint issues.
Testing has shown that OsmoMGW has difficulties with multiple codecs.
The reason for this is that the function that makes the codec decision
was not fully finished. So let's finish the codec decision function and
let's also use that decision when patching the payload type of outgoing
RTP packets.
Related: OS#5461
Change-Id: I6c3291f825488e5d8ce136aeb18450156794aeb5
At the moment we open an E1 timeslot when needed, but we never
close it even when it is not needed anymore. This may block other
entities from using it. Lets add some logic to detect whether the E1
timeslot is still needed and make sure that it is closed when it is no
longer needed.
Depends: libosmo-abis.git I073cfaba0d5073447842f22665e213135ea3f635
Change-Id: Ie6a32abbc5cd984f6d72a384e3b47c1b82ce7058
Related: OS#5198
We are currently counting events in rate counters, but there is
currently no way to get a sample of the current situation of the trunk
usage. In particular how many endpoints are currently in use.
This is a corrected version of:
Ib7b654168dc3512f55e45cc4755dc1f6f423d023
Change-Id: I6d3a74f6087512130d85002348787bffc672de81
Related: SYS#5201
This reverts commit 6bad138c96.
Reason for revert: heap-use-after-free during 'make check'
in mgcp_test.c test_retransmission()
Change-Id: I96792a719c9c7273676ab9ffe0b9e2aae4c23166
Related: OS#5201
We are currently counting events in rate counters, but there is
currently no way to get a sample of the current situation of the trunk
usage. In particular how many endpoints are currently in use.
Change-Id: Ib7b654168dc3512f55e45cc4755dc1f6f423d023
Related: SYS#5535
the trunk_nr is in struct mgcp_trunk. The trunk number can not be
negative and there is no magic value that makes use of the fact that it
could be negative. Lets use unsigned int to make this less irretating.
Change-Id: I5d0e1d76adb8c92d84331a0aca2496908e41d621
Related: SYS#5535
There exist trunk_loop commands, which sets an trunk->audio_loop
variable, however all it does is to turn on a log message. There is no
actual implementation present. Lets set the VTY commands to
DEFUN_DEPRECATED and remove the variable.
Change-Id: I72b0f8b908e32643e6e3db6ac024371b13c074a1
The struct member trunk->e1.line is never set. Also it is always
possible to use e1inp_line_find() to get a pointer to the e1.line.
Lets remove it.
Change-Id: Id4ff52285917ce3885b8dad3a16270999c9da0aa
Currently only the endpoint handling for E1 exists, but there is no
actual code behind it that handles the E1 traffic.
Change-Id: I6b93809b5ac7d01af55888347dd787b0bc997ae1
Related: OS#2659
The function mgcp_trunk_by_num() is used to directly pick a specific
trunk that is known by its id number (sometimes called "index").
Traditionally the virtual trunk will reside under id number 0 and all
consecutively created E1 trunks will be created under number 1 to 64.
This works fine, but puts a limitation on us should we ever introduce an
aditional trunk type (e.g. T1). Since the numbers must be unique
regardless of the trunk type one could not have an E1 trunk number 1 and
e.g. a T1 trunk number 1 at the same time. So we should pick the trunk
not only by its number, but also by its type to allow different trunk
types to carry the same number. The trunks will still be distinguishable
by its type along with the respective endpoint prefix.
Change-Id: I7af1e9ce601babd4a51e88201a98319e03945f83
Related: OS#2659
The E1 trunk number is currently not parsed, whenever a trunk prefix is
detected that indicates an E1 trunk, then the entire request is
rejected.
Parse the trunk number and select the trunk accordingly
Related: OS#2547
Change-Id: Ifdaab953544151e73b58cc3e95d21afdb40765f4
The trunk_type variable in struct mgcp_trunk is specified as an int,
however there is an enum mgcp_trunk_type specified. Lets use the enum as
type for trunk_type instead of int.
Related: OS#2659
Change-Id: I8e8b0cf448cfe67ad3b7caab24f301708d2a515f
The enum mgcp_trunk_type, which is currently located in mgcp_internal.h
makes more sense in mgcp_trunk.h, so lets move it.
Related: OS#2659
Change-Id: I077121503c44fc112a33f1c946f368414e28f841
The virtual trunk is a pre-configured trunk that always exists. It is
kept separate from the trunk list using a separate pointer. This makes
thinks unecessarly complicated. Lets organize the trunk in the trunk
list like any other trunk, except that we automatically create it on
startup and assign it always the trunk id number 0.
Change-Id: I81934fbd211b225ab7920e78510729c8e22607b3
Related: OS#2659
get rid of deprecated trunk parameters which seem to be leftovers
from the old osmo-bsc_mgcp implementation. This is in particular
audio_name and audio_payload in struct mgcp_trunk_config which
allowed the user to "hardcode" an andio name and payload type
via VTY configuration
The removal of the struct members above also require a change to
mgcp_codec.c. The code that is is never actively used and even
causes wrong behavior when activated (set the no-transcoding
flag in VTY). Since the code is removed also the unit tests
also require to be changed to match the new behavior.
Change-Id: Ia050ec3cd34b410dfe089c41b977ae3d5aed7354
Related: OS#2659
The trunk and endpoint handling in osmo-mgw is still very complex and
implemented in various places (mostly mgcp_protocol.c). Also we use
still integers for endpoint identification, which is not flexible enough
to address timeslots/subslots on an E1 trunk. Some refactoring is needed.
- get rid of integers as endpoint identifiers, use strings instead and
find the endpoint based on its string name on the trunk.
- identify the trunk based on the trunk prefix given in the endpoint
name.
- refactor trunk and endpoint allocation. Aggregate functionality in
in mgcp_endp.c and mgcp_trunk.c. Also remove non-reusable code that
relates to the still exisiting, but unfinished E1 trunk support.
- refactor rate counters, put them into a separate module and do no
longer allocate them per trunk. Allocate them globally instead.
Change-Id: Ia8cf4d6caf05a4e13f1f507dc68cbabb7e6239aa
Related: OS#2659
Neels Hofmeyr
Philipp Maier
Eric Wild