So far, osmo-mgw picked a single codec per side and returned only that
entry in the SDP part of MGCP 'OK' responses.
Instead, return all of the codec entries that were successfully
assigned.
The difference is shown in mgcp_test.c: before, only one of the codecs
made it through to the 'OK' reponse. Now, all of them are reflected
properly.
To clients that only ever assign a single codec, there is no change in
behavior.
Simplify the code: collapse these functions
add_rtpmap()
add_fmtp()
add_audio()
codec related part from mgcp_write_response_sdp()
and have only
add_codecs()
add_codecs() simply iterates all assigned codecs to output the 'm=audio'
line as well as any 'a=rtpmap' and 'a=fmtp' lines.
Also helping to simplify is that we recently dropped the 'fmtp-extra'
feature in Icee0cd1f5a751fa760d5a9deca29089e78e7eb93
Related: OS#6293
Change-Id: Ib197ae30a4e732e7dc36700ba8b5841806ea12f7
There are tests with multiple payloads in test_multiple_codec(), but
they do not verify the responses that osmo-mgw returns. Just add a
couple of entries to test_messages().
Change-Id: I604b81d9887eb63dab584a524b8f4eeb821e2c78
There is considerable code complexity in place for this ancient hack.
It dates back to 5ea1bc77a3
"
mgcp: Allow to freely control the a=fmtp line for experiments
In case of AMR one can specify the available codecs out-of-band. Allow
to configure this line statically in the configuration file.
"
Looking in mgcp_test.c output, the fmtp-extra tests do not even make
sense: they result in fmtp for pt=126 being added, even though there is
no payload type 126 listed in the SDP...
Related: OS#6313
Change-Id: Icee0cd1f5a751fa760d5a9deca29089e78e7eb93
Remove the limit of having only one AMR octet-aligned fmtp parameter per
MGCP message. Instead allow any arbitrary fmtp options, one per every
codec.
Deprecate all use of struct mgcp_codec_param. Instead, store and pass
plain fmtp strings.
Provide legacy shims that still act correctly for any callers that may
pass the old struct mgcp_codec_param. (I'm not sure if we need to keep
this, but we can always drop it in another patch.)
Adjust one mgcp_test.c: instead of returning only the octet-aligned
parameter, now osmo-mgw keeps and returns all the fmtp parameters that
the user provided. So add the missing "mode-change-capability".
Related: OS#6171
Related: osmo-msc Ief9225c9bcf7525a9a0a07c282ffb8cc0d092186
Change-Id: If58590bda8627519ff07e0b6f43aa47a274f052b
This is a special endpoint which can always be audited. This is useful
for clients who wish to submit requests to osmo-mgw periodically to find
out whether the MGW is still reachable. This endpoint will be used by
libomso-mgcp-client as default target endpoint to implement such
feature.
This "null" Endpoint is osmo-mgw specific, not described in MGCP specs.
Related: SYS#6481
Change-Id: Ia409b16e9211e6261e2e0f21288544289d6f3733
Unfortunately OsmoMGW was never really tested with multiple different
codecs on either side of the connection. While OsmoMSC and OsmoBSC only
assign exactly one codec on each side this has never been a problem,
however it might become a problem when a call agent assigns multiple
codecs on one side. This has been observed in a setup where OsmoMGW had
one leg towards an external call agent. Also due to recent upgrades to
the TTCN3 tests we are now able to simulate different codecs on both
sides to pinpoint issues.
Testing has shown that OsmoMGW has difficulties with multiple codecs.
The reason for this is that the function that makes the codec decision
was not fully finished. So let's finish the codec decision function and
let's also use that decision when patching the payload type of outgoing
RTP packets.
Related: OS#5461
Change-Id: I6c3291f825488e5d8ce136aeb18450156794aeb5
in mgcp_codec.c we have a function mgcp_codec_pt_translate that is used
to find the equivalent payload type number on an opposite connection.
This is quite specific and the resulting payload type number may still
belong to a codec that might require some form of conversion.
Lets refactor this so that the function just finds a convertible codec
for a given connection. This also opens up other usecases. The payload
type conversion like we did it before can then be done with a few lines
in mgcp_network.c
Related: OS#5461
Change-Id: I085260a2ca8cfecdb58656b7a046c536189e238d
The function mgcp_codec_pt_translate is very strict when comparing the
codecs to each other to find a matching payload type number to be used
on the egress side.
This poses a problem when one side uses AMR in bandwith-efficient, while
the other side uses AMR in octet-aligned payload type format. To the pt
translate function the difference in the payload format will appear as
if the codec were different and eventually the payload type number
cannot be translated.
since osmo-mgw offers conversion between the payload type format it
would be no problem to ignore the payload type format when making the
translation decision. The only exception here would be if one side would
announce AMR two times, the first time with octet-aligned and the second
time with bandwith-efficient format. Then we would have to use the
payload type number from the exact match. (and skip any formatconversion)
To archive such an optimized decision we will first go through the codec
lists and perform an exact match. If we don't get a match we go through
the codec lists a second time, but this time we ignore the payload
format.
Change-Id: Ifbd201a2749009a4644a29bd77e1d0fc0c124a9d
Related: OS#5461
This reverts commit e0058b7207. The reason
for this revert is that the solution in the reverted patch does not
cover a situation where the other side announces both payload formats at
the same time.
It could be that the end facing to a transit network announces both
formats under two different payload types. In this case no conversion
would be necessary. Depending on the input format the output would be
send to the transit network under the payload type that matches and no
conversion would happen at all.
This revert re-intruduces the problem that was fixed in the patch
before. Therefore it must be merged together with the follow up patch
(Ifbd201a2749009a4644a29bd77e1d0fc0c124a9d) that contains the proper fix.
Change-Id: I0b2854ef2397f38606fab3425be586a3d0ca27d1
Related: OS#5461
Before this patch, the free CID with the smallest number was always
selected to be used. This caused more or less the same subset of CIDs to
be used all the time, while the CIDs with bigger numbers were mostly
unused.
Let's distribute the use so that all CIDs are used roughly the same.
This has the advantage, among others, that the same CID will not be
re-used immediatelly after being freed if a new call is established.
It is useful to leave the CIDs unused for some time since the other end
peer may know of the call being tear down with some delay.
Hence if a new call is established immediately after the CID was
released, the same CID would be allocated and passed at the peer, which
would then detect that the old call (in its view still active) would
already make use of that remote CID.
Change-Id: I9dfbcc5e4b4c61ce217020e533d68fbcfa6b9f56
Related: SYS#6161
Unfortunately "-std=c99" is not sufficient to make gcc ignore code that
uses constructs of earlier C standards, which were abandoned in C99.
See https://lwn.net/ml/fedora-devel/Y1kvF35WozzGBpc8@redhat.com/ for
some related discussion.
Change-Id: I98a3c0d5cfda2c4b020652efb4f445f8288342b6
Let's use the port part of the struct mgcp_rtp_end->addr field instead
of keeping it separate. This makes it easier passing around and
using/checking the RTP remote address + port, and avoids confusion
having to check stuff outside of the address, with its port part
potentially unset.
Change-Id: I294eb5d85fae79bf62d36eb9e818426e187d442c
This makes all lines operating on rate groups way shorter. The "ctrg"
naming is already used in tons of places in osmocom code.
Change-Id: I745eddbf66e7d811bb73c8ae9bb54ea93073c71b
AMR that has the payload format bandwith-efficient is the same codec as
AMR that has the payload format octet-aligned. Its the same codec, and a
comparison of the codec info with the function codecs_same() should
return true (=equal).
The affected function codecs_same() is used by mgcp_codec_pt_translate().
When the egress payload type number is looked up, the ingress and egress
codec information is compared. When one end is using AMR in
bandwith-efficient format and the other end is using it in
octet-alingned format. Then the codec still must be recognized as the
same codec. Othersiwse the payload type number translation would not
work, even though the codec is the same on both sides.
Change-Id: I64731570c287a75d39c79c10e1bc09a37bdd54d6
Related: SYS#5834
There is no obvious reason why we would want to complicate the code by
caching pointers, since pointer traversal is probably not a performance
bottleneck, and if it is we should rather take a look at our dozens of
linked lists first..
Change-Id: I2456ba63598f76200d53e00223abf60bb36a49c0
The two callback functions policy_cb and change_cb are essentially dead
code. They also make the code more difficult to read and understand.
Lets remove them.
Change-Id: I19f67db1c56473f47338b56114f6bbae8981d067
We are currently counting events in rate counters, but there is
currently no way to get a sample of the current situation of the trunk
usage. In particular how many endpoints are currently in use.
This is a corrected version of:
Ib7b654168dc3512f55e45cc4755dc1f6f423d023
Change-Id: I6d3a74f6087512130d85002348787bffc672de81
Related: SYS#5201
This reverts commit 6bad138c96.
Reason for revert: heap-use-after-free during 'make check'
in mgcp_test.c test_retransmission()
Change-Id: I96792a719c9c7273676ab9ffe0b9e2aae4c23166
Related: OS#5201
We are currently counting events in rate counters, but there is
currently no way to get a sample of the current situation of the trunk
usage. In particular how many endpoints are currently in use.
Change-Id: Ib7b654168dc3512f55e45cc4755dc1f6f423d023
Related: SYS#5535
the trunk_nr is in struct mgcp_trunk. The trunk number can not be
negative and there is no magic value that makes use of the fact that it
could be negative. Lets use unsigned int to make this less irretating.
Change-Id: I5d0e1d76adb8c92d84331a0aca2496908e41d621
Related: SYS#5535
On a deployed osmo-mgw with RTP traffic coming from a thirdparty
RTP source, it was usual to see log messages like following one from
time to time:
"The input timestamp has an alignment error of 159 on SSRC"
Doing a quick traffic analysis showed that the above mentioned RTP
source was generating traffic from time to time containing RTP packets
with the Marker (M) bit.
Those messages were logged because the verification & patching funcions
in osmo-mgw were not Marker-bit aware. Hence, this patch implements
support for Marker bit when handling RTP packets.
The Marker bit is usually used as a start of a talkspurt, and has to be
considered a syncrhonization point, where timestamp and relation to real
time don't need to match with last received RTP packet in the stream.
Related: SYS#5498
Change-Id: I1fb449eda49e82607649122b9b9d983a9e5983fa
use the recently new available API to check both remote address and
port, instead of only the port.
It doesn't make sense to configure a conn as sendrecv if we have no IP
address to send stuff to, similar to what was already being checked with
the port.
Change-Id: I6ce8cf52930d423d3db8c27251be8350a26a4ede
Several log messages showing "Failed to send dummy RTP packet." were
seen in a osmo-mgw on the field. Let's re-use the function to check and
provide more information on what's wrong to ease debugging.
Related: SYS#5498
Change-Id: Iee6ac1f4d24c131e3bf40c37e6fdc252e5208ec8
The constant MGCP_DUMMY_LOAD is used ambigously. Sometimes it is used as
initalizer for an array, sometimes it is used as a single byte. Also the
name is not very expressive. Lets refactor this.
Change-Id: I21d96cefeeb647958bfa1e22a0ea030884746fad
Related: OS#4005
Generated with spatch with this and similat snippets:
"""
@@
expression E1, E2;
@@
- &E2->ctr[E1]
+ rate_c
Change-Id: I53b75ea8a88bc1ae4ceb479ed272865054de9665
This commit contains the bulky work of moving all address parsing to
support IPv6 together with IPv4.
Some specific patches required for full IPv6+IPv4 support requiring
behavioral changes come after this one.
Full Osmux IPv6 support is left out of the scope of this patch.
Depends: libosmocore.git Ie07a38b05b7888885dba4ae795e9f3d9a561543d (> 1.4.0)
Depends: libosmocore.git I59bf4b4b3ed14766a5a5285923d1ffa9fc8b2294 (> 1.4.0)
Change-Id: I504ca776d88fd852bbaef07060c125980db3fdd7
Due to the internal handling of the trunks it was not possible to allow
an E1 trunk that has the ID 0. However this limitation is no longer
present, so we now can allow an E1 trunk with ID 0.
Change-Id: I302c2007628f607033686e277c407232351e66ad
Related: OS#2659
The file mgcp_internal.h still contains mostly definitions and types
that are relevant for mgcp_network.c and mgcp_protocol.c. Lets give
the network and protocol module its own header files, also move stuff
that does not relate to protocol and network to the appropiate places.
Change-Id: I837eaad771ed7252304db4a81c37953b70766fff
Currently only the endpoint handling for E1 exists, but there is no
actual code behind it that handles the E1 traffic.
Change-Id: I6b93809b5ac7d01af55888347dd787b0bc997ae1
Related: OS#2659
Instead of numerous arguments (buf, len and context data), use a msgb, like
most other osmo programs do, with a msb->cb pointing at a context data struct.
This opens the future for adding/stripping IuUP header data from the msgb
easily.
(Checked to pass current ttcn3-mgw-tests.)
Change-Id: I3af40b63bc49f8636d4e7ea2f8f83bb67f6619ee
Some of the unit-tests initalize a second trunk (trunk2) but the test
never do anything with this trunk. Lets remove it.
Change-Id: I228aa45160152091baac9d9c2e6486b774278b6a
Related: OS#2659
At the moment the number of possible E1 endpoints (depends on the number
of E1 timeslots that should be used) is hardcoded and the configuration
of the number of virtual endpoints has an off-by-one problem.
For the E1 timeslots one might choose not to occupy all E1 timeslots of
once. A one TRX E1 BTS usually requires 3 E1 timeslots. One as D-Channel
timeslot and two to cover the voice channels. The voice channels
timeslots need to be set up in osmo-mgw, while the D-Channel timeslot
must not be touched. The VTY config needs to be able to reflect that.
Change-Id: I73b31e3c236a61ea0a6f76ef5ff98ce589f52c77
Related: OS#2547
The test assumes that the endpoint "rtpbridge/X@mgw" is at array
position X in many places. This does not necessarly have to match.
Accessing the array elements directly was the prefered way when the MGW
did use integer numbers and not strings to identify endpoints. Since the
endpoint name strings are used to access the endpoints the unit-test
should also reflect this.
Lets replace the integer variable last_endpoint with a string variable
and do related verifications based on strings.
Change-Id: Ic950c427f23be4a792af94972554637c2b0fbdf2
Related: OS#2659
The function mgcp_trunk_by_num() is used to directly pick a specific
trunk that is known by its id number (sometimes called "index").
Traditionally the virtual trunk will reside under id number 0 and all
consecutively created E1 trunks will be created under number 1 to 64.
This works fine, but puts a limitation on us should we ever introduce an
aditional trunk type (e.g. T1). Since the numbers must be unique
regardless of the trunk type one could not have an E1 trunk number 1 and
e.g. a T1 trunk number 1 at the same time. So we should pick the trunk
not only by its number, but also by its type to allow different trunk
types to carry the same number. The trunks will still be distinguishable
by its type along with the respective endpoint prefix.
Change-Id: I7af1e9ce601babd4a51e88201a98319e03945f83
Related: OS#2659
The E1 trunk number is currently not parsed, whenever a trunk prefix is
detected that indicates an E1 trunk, then the entire request is
rejected.
Parse the trunk number and select the trunk accordingly
Related: OS#2547
Change-Id: Ifdaab953544151e73b58cc3e95d21afdb40765f4
The virtual trunk is a pre-configured trunk that always exists. It is
kept separate from the trunk list using a separate pointer. This makes
thinks unecessarly complicated. Lets organize the trunk in the trunk
list like any other trunk, except that we automatically create it on
startup and assign it always the trunk id number 0.
Change-Id: I81934fbd211b225ab7920e78510729c8e22607b3
Related: OS#2659
get rid of deprecated trunk parameters which seem to be leftovers
from the old osmo-bsc_mgcp implementation. This is in particular
audio_name and audio_payload in struct mgcp_trunk_config which
allowed the user to "hardcode" an andio name and payload type
via VTY configuration
The removal of the struct members above also require a change to
mgcp_codec.c. The code that is is never actively used and even
causes wrong behavior when activated (set the no-transcoding
flag in VTY). Since the code is removed also the unit tests
also require to be changed to match the new behavior.
Change-Id: Ia050ec3cd34b410dfe089c41b977ae3d5aed7354
Related: OS#2659
The trunk and endpoint handling in osmo-mgw is still very complex and
implemented in various places (mostly mgcp_protocol.c). Also we use
still integers for endpoint identification, which is not flexible enough
to address timeslots/subslots on an E1 trunk. Some refactoring is needed.
- get rid of integers as endpoint identifiers, use strings instead and
find the endpoint based on its string name on the trunk.
- identify the trunk based on the trunk prefix given in the endpoint
name.
- refactor trunk and endpoint allocation. Aggregate functionality in
in mgcp_endp.c and mgcp_trunk.c. Also remove non-reusable code that
relates to the still exisiting, but unfinished E1 trunk support.
- refactor rate counters, put them into a separate module and do no
longer allocate them per trunk. Allocate them globally instead.
Change-Id: Ia8cf4d6caf05a4e13f1f507dc68cbabb7e6239aa
Related: OS#2659
rename struct mgcp_trunk_config to struct mgcp_trunk and the related
symbol name "tcfg" to "trunk" in order to better match the reality.
Change-Id: I02889dbf8149e139b1bd0326e13ce4c1aec867d1
Related: OS#2659
There were two code paths that were supposed to do exactly the same,
but then in Change-Id I3994af016fb96427263edbba05f560743f85fdd4 only
one of the two was modified, resulting in OS#4034
Let's
* dynamically allocate the virtual trunk
* rename mgcp_config.trunk to mgcp_config.virt_trunk to clarify
* as a result, abolish copy+pasted code for trunk initialization
Change-Id: I54762af6d417b849a24b6e71b6c5c996a5cb3fa6
Related: OS#4034
Currently in handle_create_con(), mgcp_conn_alloc() is called with NULl
ctx. As soon as this ctx is changed to be part of the trunk's endpoint
array (tcfg->endpoints), test will segfault because some fds from
previous tcfg are still registered after the whole tcfg object was freed
with talloc_free() by previous test. That's because
mgcp_endpoint_release() must be called on all endpoints to make sure all
registered components are correctly unplugged.
Related: OS#3950
Change-Id: I813d52b518ed0bb8db4e42dff83e040b0891fee2
In codecs_same(), do not compare the complete audio_name. The parts of it are
already checked individually:
- subtype_name ("AMR"),
- rate ("8000"; defaults to 8000 if omitted) and
- channels ("1"; defaults to 1 if omitted)
So by also checking the complete audio_name, we brushed over the match of
implicit "/8000" and "/8000/1", which otherwise works out fine.
As a result, translating payload type numbers in RTP headers now also works if
one conn of an endpoint set an rtpmap with "AMR/8000" and the other conn set
"AMR/8000/1".
It seems to me that most PBX out there generate ptmaps omitting the "/1", so
fixing this should make us more interoperable with third party SDP.
See IETF RFC4566 section 6. SDP Attributes:
For audio streams, <encoding parameters> indicates the number
of audio channels. This parameter is OPTIONAL and may be
omitted if the number of channels is one, provided that no
additional parameters are needed.
Also allowing to omit the "/8000" is a mere side effect of this patch.
Omitting the rate does not seem to be specified in an RFC, but is logical for
audio codecs defined to require exactly 8000 set as rate (most GSM codecs).
Add tests in mgcp_test.c.
Change-Id: Iab00bf9a55b1847f85999077114b37e70fb677c2
Neels Hofmeyr
Pau Espin
Philipp Maier
Oliver Smith
Harald Welte
Eric Wild
Neels Hofmeyr