The parameter ordering of the client responses does not match the
ordering as proposed by by RFC2327, Chapter 6. SDP Specification
- reorder generated SDP parameters so that they match RFC2327
Change-Id: I63cac2ebc982ffead92703c22bf68c7aafa7936c
Some of the line breaks lack the \r character, which leads to an
inconsistancy. While our software and even wireshark does ignore
the problem, other third party implementations might reject those
messages.
- Add the missing \r characters to make the message format
consistant.
Change-Id: I0cd80afae65accd3b4ddc5d82e5d30385879141c
The SDP parameter block must be detached from the regular parameters
using an additional line break (empty line). At the moment this works
because the empty OSMOX variable is added and by this also adds a
line break. It breaks as soon as OSMUX is used again.
- Make clear that no OSMUX variable is added when OSMUX is not in
use.
- Add the extra line break independently
Change-Id: I6261971040db527b96fe79676520ccd7794bd327
While parsing the head of an MGCP response the r->body buffer is
manipulated in order to NUL terminate the extracted comment filed.
- Use a static buffer to store and manipulate the comment field.
Change-Id: Ib273c13d6fe7ee042fb4e3b8ed46ac02602226f6
The function mgcp_response_parse_params() that is used to parse the
SDP parameters edits the content of the r->body.
- Create a local copy of r->body and work on this copy to keep
the original r-body in its original state.
Change-Id: Ia475036f7f3802b1638e0511a5e9162fea1592eb
the virtual trunk is addressed without a prefix (just *@domain).
- reorganize find_endpoint() so that it accepts a prefix when
addressing the virtual trunk.
- do no longer accept wildcarded CRCX requests without prefix
(will not break anything, the feature of wildcarded CRCX is
not in use yet)
- keep the old prefix-less method but print a warning that it is
depreacted.
Change-Id: I2aac3ba0f1f3122dfbb3bf36f74198ecb2b21de5
The mgcp protocol in general allows wildcarded endpoints on CRCX.
osmo-mgw does not support this feature yet.
- when the endpoint name contains a wildcard character, search
a free endpoint automatically
- return the resulting endpoint name in the parameter section of
the mgcp response
- add parsing support for the returned endpoint names
- Be more concious about the parameters that are returned with
each response. Do not unnecessarily attach known parameters.
Return the connection ID only on CRCX commands. Only return
the endpoint ID on CRCX commands that are wildcarded.
Change-Id: Iebc95043569191b6f5fbc8fe266b13fcfcab2e48
related: OS#2631
The mcgp message generator function mgcp_msg_gen() lacks support
for the mandatory SDP fields (v)ersion, (o)rigin, (s)ession and
(t)ime.
- Automatically generate the missing fields when SDP is
generated.
Change-Id: I5fbc31a17e8ac10c7cc5dbc31357b61e8920aaa5
Related: OS#2837
An MDCX without call-id does not make much sense. The call-id is
an integral element of the MDCX message to ensure that the correct
call is modified.
- update the presence check bitmasks to mark the call-id field
mandatory for MDCX requests
Change-Id: Id2bcc3a68139e0d935790bcea2ef91eaf6291aa3
osmo-mgw does not display the IP/Port on which it is listening for
MGCP commands. However, this information can be very helpful when
working with multiple MGCP instances on one machine.
- print IP/Port on which we listen for MGCP commands on startup
Change-Id: Idf5e8b6a7344c4ebaf9b89940456a496b2c23334
The current implementation of mgcp_client.c requires MGCP
paragraphs to be separated wit a \n\n sequence. However,
when the client is used with servers other than osmo-mgcp,
the parapgraph may be formatted differently.
Also allow \n\r\n\r and \r\n\r\n as separator
Change-Id: Ie209fb71499e011e52f58575c6af118de2fdee88
Adding a NUL manually is a common idiom after calling strncpy() because
strncpy() does not always NUL-terminate the string. But snprintf() is
fine.
- remove NUL termination after snprintf in mgcp_send_reset_ep()
Change-Id: I5a1187b13b21b11674f13d3449c730616b0a4ddf
At the moment the MGW has a fixed domain name string that is not even
checked properly.
- Make domain name configurable, use the current "mgw" string as
defualt to maintain compatibility
- Check the domain name with each request. If the endpoint contains
an unexpected domain name, the request must be rejected.
Change-Id: Ia91ac428ba83ac1f9b52a0ec8dbf00ef7876da9e
MGCP_ENDPOINT_MAXLEN is currently only defined for the mgcp client,
since this is in general a common parameter it should be moved to
mgcp_common.h so that both sides can use it.
Change-Id: I9e1c52aa5ebd83b2d9e5178ea24cb27d96cb7ddd
there is a now obsolete constraint that endpoint numbers must
start at 1.
- remove the check to allow also endpoints starting at 0
Change-Id: Iec2f4e36e1ab01ff23875d99e4b0e04af7c1ad98
The osmo-mgw gerrit build is currently failing with the following error:
make[3]: Entering directory '/build/src/osmo-bsc_mgcp'
CC mgcp_main.o
In file included from ../../include/osmocom/legacy_mgcp/mgcp_internal.h:146:0,
from mgcp_main.c:36:
../../include/osmocom/legacy_mgcp/osmux.h:4:33: fatal error: osmocom/netif/osmux.h: No such file or directory
#include <osmocom/netif/osmux.h>
^
compilation terminated.
Let's make sure we're adding the required flags/libs for libosmonetif dependency
Related: OS#2829
Change-Id: I402314532590498a6340dc14101a32b605cd5e09
There's no need for us to use the sockets API directly: We have
pretty nice socket helper functions in libosmocore, let's make
use of them.
Change-Id: I39d47b8a27f683060a2facf2dbecff8d00c19ce9
Previously we
* did not distinguish between the cause of errors in mgcp_header_parse
* common errors were not handled in mgcp_handle_message() but in
individual per-verb functions
Let's centralize the handling of generating error responses and remove
that burden from the individual per-verb handler functions.
Change-Id: I463b27306e10ae3b021583ed102977e7299e5e66
The MGCP client uses hex numbers, while the server side parses it
as decimal. This results in the first 10 calls succeeding, but from
0x0a onwards it of course fails :/
Change-Id: I006f5f5325f0a5069d02fec8912a38d943cfc552
Closes: OS#2784
When a connection is created in loopback mode all incoming
packets should be reflected back to their origin. If the
user did not supply a destination address with the CRCX
command all incoming packets will be tossed because no
destination address is officially known yet.
If there is no destination address set and the connection
is in loopback mode. Then use the originating address of
the incoming packet as destination address.
Change-Id: I3d1abe56d016e28c97f60635eb574679d36e2c52
mgcp_msg_gen() does not check the contents of the prameters that
are handed over with the struct. This may lead to invalid mgcp
messages sent to the MGW, which can be difficult to debug.
Add some additional checks to make a possible problem
noticeable in an early stage.
- verify that the endpoint is not a nullstring
- verify that the connection id is not a nullstring
- verify that the ip-address is not a nullstring
- verify that the port number is a value greater 0
Change-Id: I15c464c4bcdf6e524f68acc62f44186dd7ad19a7
The returncode of get_conn_id_from_response() is unchecked, which
is intentional since some of the test messages will intentionally cause
this function to fail (the response does not inclde a connection
identifier). This means it makes no sense to assert this function
to a fixed value.
In order to spot regressions better print a log message depending
on the return code.
Change-Id: I9bce9ca39b7751b557374b7ab57c6c9005bcdb7d
Fixes: Coverity CID#180534
The CRCX string parameter lacks the quotes and the result of
the function call is not checked against zero. Also the
return code of get_conn_id_from_response() is not asserted.
Fixes: Coverity CID#180534
Change-Id: If4f3ed2c3572da196160569a9705b7a302b700a9
the assertions in the code that handles the connection
lists introduce a lot of unnecessary bloat.
Change-Id: I7badc729e97b76701abbce6a73a1ad1e46d3fee0
The test that tests the cancelation of a pending mgcp message
uses an integer as connection identifier, which leads to a
segfault since connection identifiers are represented as strings.
Use a string as connection identifier.
Change-Id: I395a23c1828cf216031d69d481ad35dd458ee7d4
So far, if an MGCP message is sent, the transaction gets enqueued, but there is
no way to end the transaction other than receiving a valid reply. So, if the
caller decides that the transaction timed out and tears down the priv pointer
passed to mgcp_client_tx, and if then a late reply arrives, the callback will
dereference the invalid priv pointer and cause a segfault. Hence it is possible
to crash an mgcp_client program by sending a late response.
Furthermore, if no reply ever arrives, we would keep the pending response in
the list forever, amounting to a "memory leak".
Add mgcp_client_cancel() to discard a pending transaction. The caller can now
decide to discard a pending response when it sees fit (e.g. the caller's
timeout expired). This needs to be added to OsmoMSC and OsmoBSC.
Add mgcp_msg_trans_id() to provide an obvious way to obtain the transaction id
from a generated MGCP message.
No public API is broken; but refine the negative return code from
mgcp_client_rx(): return -ENOENT if no such transaction ID is found, and still
-1 if decoding failed. This is mainly for mgcp_client_test.
Implement a test for mgcp_client_cancel() in mgcp_client_test.c.
Tweak internal mgcp_client_response_pending_get() to take only the transaction
id as argument instead of the entire mgcp message struct.
Found-by: dexter
Related: OS#2695 OS#2696
Change-Id: I16811e168a46a82a05943252a737b3434143f4bd
OsmoMSC is in the odd situation that it is already using the new
libosmo-mgcp-client, which is targeted at osmo-mgw, to configure talking to the
old osmo-bsc_mgcp. By removing the bts_base, we break current OsmoMSC.
Removing bts_base makes sense, but let's revert this until OsmoMSC is ready
after merging Ieea9630358b3963261fa1993cf1f3b563ff23538 (which moves the
osmo-msc over to osmo-mgw).
This reverts commit 0be3ce66c0.
Change-Id: Ibce214c2bfc35623097abbb647619426ef3dcc94
The log prints the endpoint numbers as hexadecimal numbers, but
it does not prefix them with "0x".
Add "0x" prefixes to all endpoint number outputs in the log
Change-Id: I284627de02cd140a894445375e9152ff007a71e6
The MGCP connection identifier is allocated by the MGW while processing
the CRCX, see RFC3435 2.1.3.2:. Including/Accepting a connection
identifier in CRCX is "forbidden" as per RFC3435 Section 3.2.2.
So the MGW side must *reject* a CRCX message with 'I' parameter, and
allocate a connection identifier which is subsequently returned in the
response.
Closes: OS#2648
Change-Id: Iab6a6038e7610c62f34e642cd49c93d11151252c
The MGCP spec in RFC3435 is quite clear: Connection Identifiers are
hexadecimal strings of up to 32 characters. We should not print and
parse them as integers on either client or server.
Change the internal uint32_t representation of connection identifiers
to a string representation in the client and also in the server.
Closes: OS#2649
Change-Id: I0531a1b670d00cec50078423a2868207135b2436
There should not be any BTS base port to be configured at an MGCP client.
Possibly this is related to the legacy behavior of libosmo-legacy-mgcp, and
certainly has no place in libosmo-mgcp-client.
Further changes may be needed to follow up on removal of the BTS base port
concept, at least drop it from the VTY for now.
Change-Id: I36e46208d7b75611e5ade3c74d8e1c25870de511
The variable number_endpoints is used as a length indicator
for the array that contains the trunk endpoints at all times.
When osmo-mgw is startet up, the variable is set and osmo-mgw
will allocate the memory for the endpoints. However, it is
still possible to manipulate the variable via the telnet
interface. When the value is increased osmo-mgw might start
using unallocated memory at some point.
Store subsequent changes of number_enspoints in a separate
variable in order to write them to the config file. The
changes will then take effect after a restart.
Closes: OS#2632
Change-Id: I3994af016fb96427263edbba05f560743f85fdd4
mgcp_parse_config() uses a helper function allocate_trunk() to
perform the trunk allocation. This helper function only calls
mgcp_endpoints_allocate() and checks the return code.
Call mgcp_endpoints_allocate() directly from mgcp_parse_config()
Change-Id: Iefdc5b905d76d2cd97f26584261fe5cbefb699cf
osmo-mgw currently uses VTY port number constant of osmo-bsc_mgwp,
however, libosmore now offers a constant specifically for osmo_mgw,
which has the same value, but is intended to be used by osmo-mgw
use the new port number constant for osmo-mgw
Closes: OS#2628
Change-Id: I63c3b300cc9287d1755a3f2c5b5ade7fc6398f6e
Depends: libosmocore I1770787e697906322ce5815fcaadba06c01ddee9
Ensure that all msgb were cleaned up, then free the overall msgb_ctx, in order
to not leave any memory leaks the sanitizer build complains about.
Change-Id: I53373023a6c3f490d6d6cb1c283db5dfb915882c
Philipp Maier
Neels Hofmeyr
Harald Welte
Neels Hofmeyr