The virtual trunk is a pre-configured trunk that always exists. It is
kept separate from the trunk list using a separate pointer. This makes
thinks unecessarly complicated. Lets organize the trunk in the trunk
list like any other trunk, except that we automatically create it on
startup and assign it always the trunk id number 0.
Change-Id: I81934fbd211b225ab7920e78510729c8e22607b3
Related: OS#2659
The trunk and endpoint handling in osmo-mgw is still very complex and
implemented in various places (mostly mgcp_protocol.c). Also we use
still integers for endpoint identification, which is not flexible enough
to address timeslots/subslots on an E1 trunk. Some refactoring is needed.
- get rid of integers as endpoint identifiers, use strings instead and
find the endpoint based on its string name on the trunk.
- identify the trunk based on the trunk prefix given in the endpoint
name.
- refactor trunk and endpoint allocation. Aggregate functionality in
in mgcp_endp.c and mgcp_trunk.c. Also remove non-reusable code that
relates to the still exisiting, but unfinished E1 trunk support.
- refactor rate counters, put them into a separate module and do no
longer allocate them per trunk. Allocate them globally instead.
Change-Id: Ia8cf4d6caf05a4e13f1f507dc68cbabb7e6239aa
Related: OS#2659
rename struct mgcp_trunk_config to struct mgcp_trunk and the related
symbol name "tcfg" to "trunk" in order to better match the reality.
Change-Id: I02889dbf8149e139b1bd0326e13ce4c1aec867d1
Related: OS#2659
There were two code paths that were supposed to do exactly the same,
but then in Change-Id I3994af016fb96427263edbba05f560743f85fdd4 only
one of the two was modified, resulting in OS#4034
Let's
* dynamically allocate the virtual trunk
* rename mgcp_config.trunk to mgcp_config.virt_trunk to clarify
* as a result, abolish copy+pasted code for trunk initialization
Change-Id: I54762af6d417b849a24b6e71b6c5c996a5cb3fa6
Related: OS#4034
Right now a lot of errors with MGCP processing are invisible in rate
counters which makes them difficult to trace or even notice in
a production environment. E.g. reaching a limit of MGCP endpoints
is completely invisible even though it's a critical opertion alarm.
Change-Id: I6db68f044255c927dfd534fed880e405ec3ed4d6
If a config file doesn't have a 'number endpoints' config line,
we would use -1 as unsigned integer and end up with
number endpoints 4294967295
if the config file is re-written
Change-Id: I05a3814117b1d6e0cdc30740da31709ce333df4b
Closes: OS#4034
MGCP RFC3435 (https://tools.ietf.org/html/rfc3435) states almost all
text has to be handled in a case-insensitive way, except SDP parts.
Related: OS#4001
Change-Id: I637cb20f0af4de33ebf6589b1aff260d57d03e7b
MGCP RFC3435 (https://tools.ietf.org/html/rfc3435) states almost all
text has to be handled in a case-insensitive way, except SDP parts.
Related: OS#4001
Change-Id: Ifc1b3bfe6ff6922df478cea89bbbb291b5fa5706
Otherwise it would not catch a duplicate if first the param is
introduced in upper case and later in lower case, or the other way
around.
MGCP RFC3435 (https://tools.ietf.org/html/rfc3435) states almost all
text has to be handled in a case-insensitive way, except SDP parts.
Related: OS#4001
Change-Id: I254bfa3a2d2562441ca3a576cc8e1e7967d9c495
MGCP RFC3435 (https://tools.ietf.org/html/rfc3435) states almost all
text has to be handled in a case-insensitive way, except SDP parts.
Related: OS#4001
Change-Id: I51dc1cdcbe2a5587769335fbecb5039ef22cae5d
MGCP RFC3435 (https://tools.ietf.org/html/rfc3435) states almost all
text has to be handled in a case-insensitive way, except SDP parts.
Related: OS#4001
Change-Id: I48252415f9d0cd985ad097f334aa4c1665f52511
MGCP RFC3435 (https://tools.ietf.org/html/rfc3435) states almost all
text has to be handled in a case-insensitive way, except SDP parts.
Related: OS#4001
Change-Id: Ic28a5eacc4c441d68e8a20d2743956ab2e01125d
During MDCX state is already changed to ACTIVATING but we still want to
send the local CID back to announce that we still use same local CID.
Change-Id: If182a48743ebe03f97caf9034e49b9947014bdf9
We also update code to allow setting up RTP related fields to succeed
during CRCX. We also update code to allow setting up RTP related fields to
succeed during CRCX.
Change-Id: Ia6e723d9a28ba38fc3382a4fb35ea6e5bab30c09
In previous code, 2 blocks were handling osmux inclusion one after the
other under same osmux.state. However, first block changes osmux.state
so second block can never be true and X-Osmux is never added.
Change-Id: Iceee8b64978651f1fe6bb883923561b081f73d9b
Let's define macro once and use it everywhere instead of passing endp
information in different ways everywhere. Furthermore, use conn whenever
appropiate to have more information.
Change-Id: I1c49b1eb16bc5f1010376da5cf407ca6e31d81f2
This way we prepare it to add more endpoint types in the future (osmux)
and also make it clear that E1 endpoint specifics allocation is still
missing.
Change-Id: I7633b5287a436c11f0bbbdbaef1cf59a051a2471
RFC3267 specifies two framing modes for AMR packets. An octet aligned
mode is specified where all fields of the AMR packets are aligned to
octet boundaries. The second framing mode is the bandwith efficient mode
where the fields are directly packed one after another.
- add paring/generation functions for related SDP fmtp parameters
- add conversion function to convert AMR payload
Depends: libosmo-netif I5b5a0fa644d8dbb1f04f9d7e35312683c7b3d196
Change-Id: I622c01874b25f5049d4f59eb8157e0ea3cbe16ba
Related: OS#3807
There are different specifications around on how a GSM-HR frame should
be encapsulated into an RTP packet. RFC5593 specifies a ToC (Table of
Contents) byte to be prepended in front of the payload data.
The two formats can be distinguished easily by their length. Then the
data can be formatted into the corresponding opposite format and vice
versa.
- Add new VTY rtp-patch options
- Add conversion function
Change-Id: Iceef19e5619f8c92dfa7c8cdecb2e9b15f0a11a1
Related: OS#3807
Add a watchdog timer to connections, and close these connections when
the watchdog timer expires. Kick the watchdog whenever RTP messages or
the relevant MGCP messages arrive. Add the currently remaining timeout
to "show mgcp stats" in the VTY.
This feature is disabled by default, as it is incompatible with LCLS
(connections in LCLS state appear to be inactive). Enable it with the
new "conn-timeout" VTY setting. In general, this feature can be used to
work around interoperability problems causing connections to stay open
forever, and slowly exhausting all available ports. This happened for
various reasons already.
MDCX is the only relevant MGCP message:
- CRCX creates the conn and timer
- DLCX deletes the conn and timer
- MDCX is the only remaining supported MGCP message that indicates a CI
- Can't easily generically parse a CI for all MGCP messages, parsing is
done in handle_modify_con().
Related: OS#3429
Change-Id: I18886052e090466f73829133c24f011806cc1fe0
Add a counter group for DLCX commands. The group contains counters for
successful connection processing as well as various error conditions.
This provides a quick overview of DLCX failures on each trunk throughout
the lifetime of the osmo-mgw process.
The counters are displayed by 'show mgcp stats' and 'show rate-counters'
While here, rename MGCP_MDCX_FAIL_DEFERRED_BY_POLICY to
MGCP_MDCX_DEFERRED_BY_POLICY; we have decided that deferred connections
aren't failures, and this keeps names used by DLCX and MDCX in sync.
Also remove some allocation failure checks with OSMO_ASSERT(); such
checks aren't en vogue anymore.
Change-Id: Ie0dde2faf02fd68a69f986973d39b1bea367039b
Depends: I80d36181600901ae2e0f321dc02b5d54ddc94139I
Related: OS#2660
The function that parses the LCO uses an internal buffer to store the
codec name that has been issued via LCO. This buffer is only 9 byte
long, this means an 8 character string can be stored. If a codec name
exceeds this limit it gets chopped. For example "GSM-HR-08" becomes
"GSM-HR-0", which may mess up the codec negotiation.
- Increase the buffer from 9 to 17 byte.
Change-Id: I17ce7acde1f23ab1394227d74214fe2a55cd2264
Related: OS#3673
Add a counter group for aggregated RTP connection statistics.
This group contains RTP counters which aggregate values of the
ephemeral RTP counters maintained per connection (mgcp_conn).
This provides a global overview of RTP processing for each
trunk throughout the lifetime of the osmo-mgw process.
The counters are displayed by 'show mgcp stats' and 'show rate-counters'.
While here, fix a typo in an item of the mgcp_conn_rate_ctr_desc array:
"rtp:octets_rx" was displayed for outbound packes; now says "_tx".
Change-Id: I80d36181600901ae2e0f321dc02b5d54ddc94139
Related: OS#2660
Add a counter group for MDCX commands. The group contains counters for
successful connection processing as well as various error conditions.
This provides a quick overview of MDCX failures on each trunk throughout
the lifetime of the osmo-mgw process.
The counters are displayed by 'show mgcp stats' and 'show rate-counters'.
Change-Id: I79c27425ba40c3a85edc6cd846cba325d847298c
Depends: Ia2004f8063f3a50b5d7a838ebe8a784a47fcc50d
Related: OS#2660
Add counters for error conditions which I overlooked in
commit 1e174875bf
Change-Id: Ia2004f8063f3a50b5d7a838ebe8a784a47fcc50d
Depends: If4f097c5e441914eaa24c7657813ebb3f9a49916
Related: OS#2660
Use a local variable to shorten the length of rate counter names.
Cosmetic only; no functional change.
Change-Id: If4f097c5e441914eaa24c7657813ebb3f9a49916
Related: OS#2660
Add a counter group for CRCX commands. The group contains counters for
successful connection processing as well as various error conditions.
This provides a quick overview of CRCX failures on each trunk throughout
the lifetime of the osmo-mgw process.
For example, after running the TTCN3 mgw test suite, the counters show
the following values:
OsmoMGW> show rate-counters
crxc statistics:
crcx:success: 88 (0/s 88/m 0/h 0/d) CRCX command processed successfully.
crcx:bad_action: 0 (0/s 0/m 0/h 0/d) bad action in CRCX command.
crcx:unhandled_param: 1 (0/s 1/m 0/h 0/d) unhandled parameter in CRCX command.
crcx:missing_callid: 1 (0/s 1/m 0/h 0/d) missing CallId in CRCX command.
crcx:invalid_mode: 1 (0/s 1/m 0/h 0/d) connection invalid mode in CRCX command.
crcx:limit_exceeded: 0 (0/s 0/m 0/h 0/d) limit of concurrent connections was reached.
crcx:unkown_callid: 0 (0/s 0/m 0/h 0/d) unknown CallId in CRCX command.
crcx:alloc_conn_fail: 0 (0/s 0/m 0/h 0/d) connection allocation failure.
crcx:no_remote_conn_desc: 1 (0/s 1/m 0/h 0/d) no opposite end specified for connection.
crcx:start_rtp_failure: 0 (0/s 0/m 0/h 0/d) failure to start RTP processing.
crcx:conn_rejected: 0 (0/s 0/m 0/h 0/d) connection rejected by policy.
OsmoMGW>
These same counters are now also shown by 'show mgcp stats'
in the context of the trunk which they belong to.
With input from Philipp Maier.
Change-Id: Ida82fc340d5c66180e5fe9a0d195e9be6dc64c61
Related: OS#2660
Instead of just -1, return RFC3435 error codes that can be used to compose a
FAIL message response. Note that the return value stays compatible in that it
returns 0 on a valid Connection Identifier, nonzero otherwise.
The idea is to be able to distinguish between "Conn ID not found" and "Conn ID
invalid" in mgcp_test.c's expected output, in upcoming change
I8d6cc96be252bb486e94f343a8c7cae641ff9429.
Change-Id: Ifc17f2893cc4b9a865f3ffcb9888bbf1039337a6
Adjust the X-Osmo-IGN parsing to use string tokens instead of parsing single
characters.
Reconsidering the first implementation as a poor choice, rather specify the
format of X-Osmo-IGN as any-length string tokens separated by spaces, which is
more flexible and more future proof.
See also osmo-gsm-manuals If15a88c3b5b40fd1d24ad0f94f3231f678669ab1 which
defines the X-Osmo-IGN format as string tokens, matching this patch.
In mgcp_test, add an unknown X-Osmo-IGN item. Though the output is not checked
by the testsuite.at, running manually shows the error log about the unkown
X-Osmo-IGN item.
Change-Id: Ia6fe5ead4b601931c1bf41b29fc1b237aac37d2c
The format is
CRCX ...
C: ...
M: ...
X-Osmo-IGN: C
So far the only ignorable element is C, i.e. the CallID. Any other items may be
added in the future.
(I initially intended to also add '@' to ignore the endpoint name's domain
part, but in the osmo-mgw code base the domain part is verified long before any
additional headers are even parsed, so sparing that refactoring for now.)
The intention is that osmo-bsc will issue "X-Osmo-IGN: C" for all SCCPlite
calls, because we are unable to retrieve the CallID that the MSC sends to
osmo-mgw for the network side of the endpoint.
Testing with a specific SCCPlite MSC, I actually observe that all CallIDs are
1, even for concurrent calls. So, an alternative hacky solution would have been
to always pass CallID == 1 for SCCPlite connections from osmo-bsc.
Related: I257ad574d8060fef19afce9798bd8a5a7f8c99fe (osmo-bsc)
Change-Id: Id7ae275ffde8ea9389270cfe3db087ee8db00b51
The function setup_rtp_processing() in mgcp_protocol.c executes a
function pointer setup_rtp_processing_cb(). The function pointer
gets two struct mgcp_rtp_end pointers as parameter. To get those
parameters it has to dereference them from struct mgcp_conn_rtp
pointers. The variable conn_src is such a struct pointer and there
are conditions where this pointer may be NULL. The function at the
function pointer should get the conn pointers directly instead of
the dereferenced end (rtp) pointers. This also gives additional
flexibility to the implementation behind the function pointer,
which is not yet defined (the function pointer points always to
a stub function since we donot support transcoding yet.
- give conn pointers directly to setup_rtp_processing_cb() insed
of dereferencing conn_src->end
Change-Id: Id46e9bfba88613387026639eb4957221cce6820a
Closes OS#3406
The codec negotiation via SDP is currently in a neglected state. Also
osmo-mgw does some kind of codec decision wile the SDP is parsed, the
result is information for one codec, even when there are multiple codecs
negotiated. This is problematic because we loose all information about
alternate codecs while we parse. This should be untangled and the
information should be presevered. Also we are not really capable
picking a default. Wehen we do not supply any codec information (not
even LCO), then we should pick a sane default codec.
- separate the codec decision from the sdp parser and concentrate
codec related code in a separate c file
- add support for multiple codecs in one SDP negotiation
- do not initalize "magic" codec defaults during conn allocation
- do not allow invalid payload types, especially not 255. When
someone tries to select an invalid payload type, do not fail
hard, just pick a sane default.
- handle the codec decision in protocol.c, pick a sane default
codec when no (valid) codec has been negotiated (no LCO, no SDP)
Change-Id: If730d022ba6bdb217ad4e20b3fbbd1114dbb4b8f
Closes: OS#2658
Related: OS#3114
Related: OS#2728
At the moment osmo-mgw will accept multiple lco options. (e.g.
p:10, a:PCMU, p:10) If LCO appear multiple times, than the first
appearance of will be parsed and used, all following appearances
will be ignored. However, having multiple appearances of LCO is
illegal and affected requests should be rejected. Also osmo-mgw
should reject illegal formatted LCO strings
- make sure that multiple appearances of LCOs will be rejected
- make sure that illegal formated LCOs are rejected
- add testcases with garbeled LCO and valid LCO examples
Change-Id: Iae2fddfa5f2bcfc952f8ab217b3056694e5f7812
Closes: OS#3119
In the current implementation the LCO parameters are reset. This means
that an MDCX without LCO will reset the LCO that have previously set
via CRCX. But according to RFC 3435 6.8 LocalConnectionOptions, the
LCO parameters should be preserved or left at their defaults if missing.
- Make sure LCO are retained if no LCO string is present.
- Also preserve the values of individual parameters if missing.
Change-Id: Ia0d73f61516618317dcd1d49384818fd8de27aa6
"unable to create connection resource error" sounds a bit strange.
Lets just output "unable to create connection".
Change-Id: Ibef16b455f2e122c8e5ff95240c4d7a654c56a39
The function allocate_port tryes at least 200 different ports when
a new port is allocated. Since after every allocation the port
number is incremented the allocation should be able to allocate
a port with the first attempt. However, the number 200 is an
arbitrary number and it will not cover the whole port range in
most cases.
- Make sure that in the worst case at each port in the range
is tryed once, not only the next 200
Change-Id: Ic47f09869eaddd4aea817bb2517362883d65d029
Related: OS#2825
When a wildcarded request is made with a DLCX or MDCX command
the MGW will search for a free endpoint and continues the command
execution with that endpoint.
- Catch the wildcarded request early on DLCX and MDCX and return
with an error code.
See also TTCN3 testcases:
MGCP_Test.TC_mdcx_wildcarded
MGCP_Test.TC_dlcx_wildcarded
Change-Id: Ia77d44a6a86083e62338e5845b553e5cf13ebd10
When a wildcarded CRCX is done flag "wildcarded_crcx" is set in the
endpoint struct. The flag tells other part of the code whether the
request was wildcarded or not since in some cases the behaviour
might be different for wildcarded requests. The implementation of
this mechanism is not entirely correct. The flag is set on wildcarded
requests but on non wildcarded requests it is not reset. Also the
name is misleading.
- rename wildcarded_crcx to wildcarded_req
- ensure the flag is refreshed with every new request
Change-Id: Ia5063ec65f5bc3a8a0943d1fd823aaeee20b8637
The connection mode setting (e.g. recvonly) is not checked on CRCX
and MDCX. This allows requests that set the connection mode to
sendrecv or sendonly without ever configuring the remote end of
the connection (half-open connection).
- reject sendrecv or sendonly on half open connections
See also TTCN3 Test:
MGCP_Test.TC_crcx_early_bidir_mode
Change-Id: I6ab01855d3b1faa36aebac357e7b97c563990678
Related: OS#2652
When set_local_cx_options() returns an error code the MGCP command
execution is aborted and and the error code is returned, but on
CRCX the already seized eindpoint is not released.
- Do not generate the error response on the spot, jump to the
respective label and let the already existing error handling
do its work.
This patch is a follow-up page to:
Change-Id I02aaa3042f2a0e32eb4ec6b8753deab7082947a0
Change-Id: Iaef4ea6c6a2f24ac8b276966bda72d0b30f25cd5
Related: OS#2654
When an unsupported MGCP parameter (e.g. N) is used, then this
parameter is ignored and the command execution continues. However,
an MGCP command that contains an unsupported parameter should
be rejected.
- Make sure that MGCP commands DLCX, CRCX and MDCX are rejected,
when they contain unsupported parameters.
Change-Id: I8cd5987fc6befcd53a7c4916f77b1a24c904ba48
The short term of endpoint has always been "endp" througout the whole
project and not "ep".
- rename mcgp_ep.c to mgcp_endp.c
- rename mgcp_ep.h to mgcp_endp.h
Change-Id: Id52047bb2d0407655ac272c858ed3412b8ae9e6d
In order to allow clean prefixes for future endpoint related
functions the "rlease" should be moved to the end of the
function name.
- rename mgcp_release_endp to mgcp_endp_release
Change-Id: I22e938e702f57ad76d38c9f4a1370b110ac1ba11
When a wildcarded CRCX is done, then the endpoint number is
returned as unsigned integer (%u). This results into problems
with endpoint numbers higher than 9.
- Return endpoint identifier with the endpoint number in
hexadecimal representation
Change-Id: I504f4658c193009347753b15256dbb46b32ad5a4
When the local connection options in an MDCX or CRCX request
are parsed, then the packetization interval is not checked.
- Check if the packetization is a multiple of 20ms
see also TTCN3 test: MGCP_Test.TC_crcx_unsupp_packet_intv
Change-Id: I02aaa3042f2a0e32eb4ec6b8753deab7082947a0
Related: OS#2654
Some of the line breaks lack the \r character, which leads to an
inconsistancy. While our software and even wireshark does ignore
the problem, other third party implementations might reject those
messages.
- Add the missing \r characters to make the message format
consistant.
Change-Id: I0cd80afae65accd3b4ddc5d82e5d30385879141c
The SDP parameter block must be detached from the regular parameters
using an additional line break (empty line). At the moment this works
because the empty OSMOX variable is added and by this also adds a
line break. It breaks as soon as OSMUX is used again.
- Make clear that no OSMUX variable is added when OSMUX is not in
use.
- Add the extra line break independently
Change-Id: I6261971040db527b96fe79676520ccd7794bd327
the virtual trunk is addressed without a prefix (just *@domain).
- reorganize find_endpoint() so that it accepts a prefix when
addressing the virtual trunk.
- do no longer accept wildcarded CRCX requests without prefix
(will not break anything, the feature of wildcarded CRCX is
not in use yet)
- keep the old prefix-less method but print a warning that it is
depreacted.
Change-Id: I2aac3ba0f1f3122dfbb3bf36f74198ecb2b21de5
The mgcp protocol in general allows wildcarded endpoints on CRCX.
osmo-mgw does not support this feature yet.
- when the endpoint name contains a wildcard character, search
a free endpoint automatically
- return the resulting endpoint name in the parameter section of
the mgcp response
- add parsing support for the returned endpoint names
- Be more concious about the parameters that are returned with
each response. Do not unnecessarily attach known parameters.
Return the connection ID only on CRCX commands. Only return
the endpoint ID on CRCX commands that are wildcarded.
Change-Id: Iebc95043569191b6f5fbc8fe266b13fcfcab2e48
related: OS#2631
Adding a NUL manually is a common idiom after calling strncpy() because
strncpy() does not always NUL-terminate the string. But snprintf() is
fine.
- remove NUL termination after snprintf in mgcp_send_reset_ep()
Change-Id: I5a1187b13b21b11674f13d3449c730616b0a4ddf
At the moment the MGW has a fixed domain name string that is not even
checked properly.
- Make domain name configurable, use the current "mgw" string as
defualt to maintain compatibility
- Check the domain name with each request. If the endpoint contains
an unexpected domain name, the request must be rejected.
Change-Id: Ia91ac428ba83ac1f9b52a0ec8dbf00ef7876da9e
Previously we
* did not distinguish between the cause of errors in mgcp_header_parse
* common errors were not handled in mgcp_handle_message() but in
individual per-verb functions
Let's centralize the handling of generating error responses and remove
that burden from the individual per-verb handler functions.
Change-Id: I463b27306e10ae3b021583ed102977e7299e5e66
The log prints the endpoint numbers as hexadecimal numbers, but
it does not prefix them with "0x".
Add "0x" prefixes to all endpoint number outputs in the log
Change-Id: I284627de02cd140a894445375e9152ff007a71e6
The MGCP connection identifier is allocated by the MGW while processing
the CRCX, see RFC3435 2.1.3.2:. Including/Accepting a connection
identifier in CRCX is "forbidden" as per RFC3435 Section 3.2.2.
So the MGW side must *reject* a CRCX message with 'I' parameter, and
allocate a connection identifier which is subsequently returned in the
response.
Closes: OS#2648
Change-Id: Iab6a6038e7610c62f34e642cd49c93d11151252c
The MGCP spec in RFC3435 is quite clear: Connection Identifiers are
hexadecimal strings of up to 32 characters. We should not print and
parse them as integers on either client or server.
Change the internal uint32_t representation of connection identifiers
to a string representation in the client and also in the server.
Closes: OS#2649
Change-Id: I0531a1b670d00cec50078423a2868207135b2436
The variable number_endpoints is used as a length indicator
for the array that contains the trunk endpoints at all times.
When osmo-mgw is startet up, the variable is set and osmo-mgw
will allocate the memory for the endpoints. However, it is
still possible to manipulate the variable via the telnet
interface. When the value is increased osmo-mgw might start
using unallocated memory at some point.
Store subsequent changes of number_enspoints in a separate
variable in order to write them to the config file. The
changes will then take effect after a restart.
Closes: OS#2632
Change-Id: I3994af016fb96427263edbba05f560743f85fdd4
Currently there are two ways to set the rtp bind ip-address (local
ip address where the rtp streams are bound to). It is possible to
set no set an rtp bind ip, if none no address is configured, then
the ip address where the mgcp service is bound to is used.
On a system with multiple network interfaces it is likely that
there are the remote end is not reachable through the interface
that has been configured. In this case rtp ip-probing can be
enabled via vty option in order to automatically detect the
ip address of the interface that points towards the remote end.
The autodetection can only work if the ip-address is known when
a CRCX is performed. For this the remote entity must include the
remote ip address in the sdp trailer.
Implement probing to determine te right local ip address
Add debug log to display which ip address is actually used
Add a VTY option for the probing functionality.
Change-Id: Ia57cf7dab8421fd3ab6e1515727db0080373485e
The way how osmo-mgw decides when to send a dummy packet and
when not is not very obvious.
use more explicit if statements, and define constants. Also add
comments that explain how it works.
Change-Id: Ie7ee9409baec50a09fb357d655b5253434fae924
In many cases it is simpler to instruct the mgcp-gw to drop all
connections at once instead of removing each connection
individually.
drop all connections and release the endpoint in when no connection
id is supplied with the DLCX command.
Change-Id: Ib5fcc72775bf72b489ff79ade36fb345d8d20736
move SDP generator function write_response_sdp() from mgcp_protocol.c
to mgcp_sdp.c and use msgb_printf() instead of snprintf()
move prototypes for mgcp_parse_sdp_data() and mgcp_set_audio_info()
to mgcp_sdp.h
change parameter list of mgcp_parse_sdp_data() so that it takes the
rtp conn directly, rather than struct mgcp_rtp_end.
add doxygen comments to all public functions
Change-Id: I9f88c93872ff913bc211f560b26901267f577324
Remove mgcp_common.c and replace with mgcp_common.h.
Move mgcp_common.h from mgcp_client/ to mgcp/;
Place a compile-time copy of it back in mgcp_client/.
Add builddir/include to compiler -I paths to find generated header.
Rationale:
- Keep separate copies of the file for each of the library to not require
debian dependencies between the two libraries.
- Avoid code dup by copying during 'make' (think: a generated header, BUILT_SOURCE).
- The copy does not have implications for linking (like mgcp_common.c did) nor
is it a source for build confusion or fallout in other projects, because it
does not reach across several git source trees (like gsm_data_shared.h did).
mgcp_connection_mode_strs are not actually used in libosmo-mgcp, so drop them.
(It would make semantic sense to have then in mgcp, but we can add it when it
is needed. A similar value string array remains in libosmo-mgcp-client.)
Change-Id: I7a5d3b9a2eb90be7e34b95efa529429f2e6c3ed8
Leave the old osmo-bsc_mgcp and libosmo-legacy-mgcp as it is; on a copy thereof
(added by a previous commit), apply changes to initially implement the new
osmo-mgw.
Adjust build system and debian packaging to accomodate the new libosmo-mgcp and
osmo-mgw.
The main differences:
*) use a list to manage rtp connections.
Aggregate all rtp related information inside a single struct.
Use a linked list to manage the both connections (net and bts).
The idea behind using a list is that we might support conference
calls at some later point.
Store the linked list in struct mgcp_endpoint, have a private linked
list for each endpoint. The list contains connection items which are
implemented in struct mgcp_conn. A connection is allocated and freed
using the functions in mgcp_conn.c. A connection is allocated on the
reception of a CRCX command and freed with the reception of a DLCX
command.
*) remove external transcoder feature
Fortunatelly the external transcoder feature is not needed
anymore. This patch removes the related code.
*) vty: get rid of CONN_BTS and CONN_NET
Since the new connection model does not make a difference
between BTS and NET connections the VTY should not use
the fixed CONN_BTS and CONN_NET constants.
- Handle the conns list inside the endpoint directly
- introduce function to dump basic rtp connection info
- introduce human readable names for connections
Parts of the code adjusted to use generalized connections instead of explicit
BTS/NET ones:
- teach mgcp_send_dummy() to send dummy packets to any RTP connection
- network: generalize mgcp_bind_net/bts_rtp_port()
- network: generalize mgcp_send()
- tap: generalize call tapping feature
- stat: generalize statistics
- Replace rtp_data_net() and rtp_data_bts() with generalized rtp_data_rx()
*) mgcp_protocol.c fixes:
- check ci string before it is converted:
In case of missing ci, a nullpointer is delivered to strtoul().
Add a function that takes ci, checks it and converts it to an
uint32_t. Use the return code to react on missing ci.
- output error message on missing CI.
- when parsing the mode, print log message when mode is missing.
- use mode_orig when mode is missing.
- fix ptime formatstring to use %u rather than %d.
- cosmetic: log when connection is deleted on DLCX.
- change loglevels of CRCX, MDCX, DLCX events from DEBUG to NOTICE.
*) mgcp_test
- apply rename of strline_r() to mgcp_strline().
- MGCP command macros:
- Add 'I: 1' parameters.
- Use proper port numbers:
from m=audio 0 RTP/AVP 126
to m=audio 16002 RTP/AVP 128
- Change ptime to 'a=ptime:40' because this is what the MGW currently
returns. CRCX generally feed a ptime:40 and this is expected to be
returned.
- struct mgcp_test: Use only one ptype, there are no explicit BTS and NET
endpoints anymore.
Hence remove one column from tests[].
- test_messages():
- Enable: remove '#if 0'
- Remove concept of BTS and NET endpoints: test only one conn, as they are
now interchangeable anyway.
- remove endpoint init, now done internally.
- add false asserts in error cases.
- test_retransmission():
- remove endpoint init, now done internally.
- add false asserts in error cases.
- test_packet_error_detection():
- Remove concept of BTS and NET endpoints: test only one conn, as they are
now interchangeable anyway. Use arbitrary conn ids (e.g. 4711).
- remove endpoint init, now done internally.
- add false assert in error case.
- Assert that a conn really vanishes on DLCX, previously the conn would
remain and just be unused, now it is actually discarded.
- test_no_cycle()
- Remove concept of BTS and NET endpoints: test only one conn, as they are
now interchangeable anyway. Use arbitrary conn ids (e.g. 4711).
- test_no_name()
- Enable: remove '#if 0'.
- remove endpoint init, now done internally.
- add false assert in error case.
- mgcp_test.ok: adjust expected results to status quo:
- We now see two dummy packets instead of one, now sent to both sides because
we don't know of BTS or NET side. (maybe drop dummy packets later...)
- packet duration, conn mode: now sane defaults show instead of unset.
- various whitespace and formatting changes from lindent.
Change-Id: Ie008599136c7ed8a0dfbb0cf803188975a499fc5
This a cosmetic commit, copying libosmo-legacy-mgcp to libosmo-mgcp and
osmo-bsc_mgcp to osmo-mgw 1:1 at first, to provide a basis for next patches
that highlight the changes from legacy to new code.
Until osmo-msc and osmo-bsc are adjusted to operate with the new code, we will
keep the legacy code alongside the new code. The legacy code might be dropped
later.
Change-Id: Idf54481754a1765bdb2d0d7033bc0d7dc2018024
Philipp Maier
Harald Welte
Alexander Chemeris
Pau Espin
Oliver Smith