* Move all of them to an anonymous "osmux" substruct to have them all
together.
* Rename some fields to clarify its meanings, similar to what
was already done in osmo-bts.
* Move the port VTY config next to the ip address ones.
Change-Id: Icc1c1ce3ab3a8beb941cda7c112485a0db882a90
Parameters passed to several functions are rearrange to make code
simplier to follow, as well as dependencies between the different
functions. As a result, some parameters can be marked as const while
doing the change.
Change-Id: Idebd4a66630c16548f557632a54d6b7e1b3906fd
It's checked in all code paths being called, which makes sense since
it's impossible to send anything if the remote address is not set. Let's
check it once in a unique to simplify the code.
Change-Id: I224dbfeda17c364b85166268e2ac1e019a87edb6
A new osmux bind-ip-v6 VTY command is added, similar to what's already
available for RTP. This way the user can decide whether to support IPv4,
IPv6 or both types of IP versions.
Both IP sockets are by default disabled, and must be explicitly enabled
by setting the bind-ip in the VTY configuration.
Change-Id: I446cd7da217e9f4a74995d7784ae55dcc60a29b7
Let's use the port part of the struct mgcp_rtp_end->addr field instead
of keeping it separate. This makes it easier passing around and
using/checking the RTP remote address + port, and avoids confusion
having to check stuff outside of the address, with its port part
potentially unset.
Change-Id: I294eb5d85fae79bf62d36eb9e818426e187d442c
There's no need to separate between BSS and CN side nowadays, the
different types are used nowehere. This separation dates from
osmo-bsc-nat code days.
Change-Id: I65effeddf033eb1955553e8d659c593b4e67f7bc
Let's not delay allocation of rate counters until the osmux conn is
fully enabled, since we may want to count stuff before that point in
time.
Fixes crash accessing null conn->osmux.ctrg in
MGCP_Test.TC_two_crcx_and_rtp_osmux_bidir.
Change-Id: Ic31d3567f4d24e628f8983d8362e5c7c2f66ec02
So far the implementation only allowed the remote CID being the same as
the one dynamically implemented internally.
Related: SYS#6138
Change-Id: I6b03eabc0305580c9788c529bec7dda9044a008f
It makes sense to handle one osmux socket per trunk. Since we only so
far operate one RTP/osmux trunk, let's stick to that only one for
simplicity.
Change-Id: I173266c4058d5db9479d773d7dec1304bc8f1f99
This was previously broken and a free endpoint was requirted to dlcx *,
additionaly globally handling this is difficult due to different
response
codes, so just do it in the functions, they know best.
Change-Id: I8cbbe5936067ea1caa7935e8d14908ac5c4010bd
There is no obvious reason why we would want to complicate the code by
caching pointers, since pointer traversal is probably not a performance
bottleneck, and if it is we should rather take a look at our dozens of
linked lists first..
Change-Id: I2456ba63598f76200d53e00223abf60bb36a49c0
They are mostly not even as large as the talloc header used to
dynamically allocate them, and they are also not "shared" by anything.
Change-Id: I7b46d531c5d3b53984f2ce44538116973f6a074d
The rate counter and stats item groups, which are allocated in
mgcp_ratectr.c are freed using a talloc destructor that is set in the
context of the item we just allocated using the stats / rate counter API
functions. When we do that, we risk overwriting an already existing
talloc destructor. Lets instead implement own free functions and set
those as talloc_destructor from above (trunk and MGCP config)
Change-Id: Ifc5091e9f95cc721e58d1eb2e55b97102c497706
Related: OS#5201
The two callback functions policy_cb and change_cb are essentially dead
code. They also make the code more difficult to read and understand.
Lets remove them.
Change-Id: I19f67db1c56473f47338b56114f6bbae8981d067
The logic when an endp pointer is guranteed and when we are able to
process the request without the endp pointer populated is qute complex.
This shows up as a bug to coverity.
Change-Id: I1d4221f2df13c43321d5466534485cf21f0d9010
Fixes: CID#237088
The request handler handle_delete_con currently rejects wildcarded DLCX
requests even though a wildcarded DLCX would be a valuable tool to
remove lingering connections from the trunk in case osmo-bsc has to be
restarted.
Change-Id: I5c2de6b2b61ee64ba9c0618fd20e8fc2fe6a5ed3
Related: SYS#5535
The function create_response_with_sdp calls add_params, which is rather short.
The code in there can also be put in create_response_with_sdp. The
decision whether the endpoint name (Z) should be added or not, should be
made by the caller.
Change-Id: I7e29c513f4386832646e96194ed6c2397405ed3b
Related: SYS#5535
There is not always an endp pointer present when mgcp_check_param() is
called but we always have a trunk pointer. Lets add a trunk parameter so
that the function can pick LOGPTRUNK when endp is not available.
Change-Id: I7327c5a105e7f0e20cabf64623ff9f36fd83bbb8
Related: SYS#5535
At the moment the MGCP request handling and message parsing is not
clearly separated. The function mgcp_parse_header() in mgcp_msg.c is
also responsible for resolving an endpoint. This leads to unclear layer
separation. We eventually end up in a situation where we can not execute
any request handler without beeing able to resolve an endpoint, however
this is necessary if we want to implement wildcarded DLCX resquests.
In the current situation a wildcarded DLCX is not possible to implement
as we always have to resolve a an to get to the trunk which we need to
iterate. However, we just can't resolve a free endpoint in a situation
where all endpoints on te trunk are in use.
We have to refactor the request handler so that the parsing in mgcp_msg
only extracts us the endpoint name. The resolving is then done in
mgcp_handle_message() in mgcp_protocol.c. Then we are able to decide
what to do if we are unable to resolve an endpoint but still be able to
resolve the trunk.
This patch does not change the behaviour of osmo-mgw yet, but it lays
the foundation for request handler implementations that can still
perform useful actions if no endpoint but a trunk has been resolved. A
wilcarded DLCX is such a case. It does not need an endpoint, just the
trunk.
Change-Id: I9f519d8a0ee8a513fa1e74acf3ee7dbc0991cdde
Related: SYS#5535
the various types of MGCP requests are implemented in request handlers
functions. The function pointers to those functions are held in an array
that is used to find the right handler and call it then. The struct used
to model the array is defined somewhat away from the array definition
and there is also a macro in between that does not help to make the code
more understandable. Lets refactor this a bit to have it more distinct.
Change-Id: I2ef167b2ac179d2b0683a27a095f9662fda460bf
Related: SYS#5535
The rate counter group is currently only referenced by an index. In a
system with multiple trunks this makes it difficult to say which rate
counter group belongs to which trunk sinde the index that is used does
not necessarly corespond to a specific trunk.
Since rate counter groups can now get a human readable name assigned, we
should do that.
Also E1 specific rate counters only make sense for E1-trunks, so they
should not be present on the virtual trunk.
Change-Id: I5e7f0e9081a06af48e284afa5c36a095b2847704
The logic in mgcp_keepalive_timer_cb() only sends dummy packets for
endpoints 1-N, leaving out endpoint 0, this is not correct it should
include all endpoints (0-N).
Change-Id: I99a9b572eac26780bc1286a8dd63c4c5652fda4f
use the recently new available API to check both remote address and
port, instead of only the port.
It doesn't make sense to configure a conn as sendrecv if we have no IP
address to send stuff to, similar to what was already being checked with
the port.
Change-Id: I6ce8cf52930d423d3db8c27251be8350a26a4ede
The following sequence of events was seen frequently in a osmo-mgw
instance running on the field with heavy traffic:
"""
endpoint:rtpbridge/1@mgw CRCX: creating new connection ...
mgcp_network.c:236 endpoint:rtpbridge/1@mgw CI:1C8CCFA9 Failed to send dummy RTP packet.
"""
Allegedly, that happens because at CRCX time the remote address may
still not be known, hence we end up trying to send a dummy rtp packet
to, for instance, host 0.0.0.0 port 0, which will of course fail.
Let's avoid sending it if the address is not yet known.
Similary, same issue could be seen during MDCX, since at MDCX we don't
necessarily need to have a valid addr+port (there could be several MDCX
and only last one set it).
Finally, the keepalive timer also needs the check, since it iterates
over all connections, and it could be that some is still not fully
configured.
Related: SYS#5498
Change-Id: I8ceafda691146823b12232b4a804b4ce74acbdc8
Generated with spatch with this and similat snippets:
"""
@@
expression E1, E2;
@@
- &E2->ctr[E1]
+ rate_c
Change-Id: I53b75ea8a88bc1ae4ceb479ed272865054de9665
MDCX may provide a new remote address, which means we may need to update
our announced IP addr and re-bind our local end. This can happen for
instance if MGW initially provided an IPv4 during CRCX ACK, and now MDCX
tells us the remote has an IPv6 address.
Change-Id: Iaed424e2c209e1753e1f579752fc684aaad7a512
It doesn't make sense to call the function several times since anyway we
are only binding during
allocate_port()->mgcp_bind_net_rtp_port()->bind_rtp()->mgcp_create_bind()->osmo_sock_init2().
Let's better calculate the local IP addr once and use that stored value.
THis is a previous step towards next commit updating the local IP addr
and re-bindng if encessary.
Change-Id: I803b99c5e5fe0f92a5bf6796d8c25df88d1608e6
This commit contains the bulky work of moving all address parsing to
support IPv6 together with IPv4.
Some specific patches required for full IPv6+IPv4 support requiring
behavioral changes come after this one.
Full Osmux IPv6 support is left out of the scope of this patch.
Depends: libosmocore.git Ie07a38b05b7888885dba4ae795e9f3d9a561543d (> 1.4.0)
Depends: libosmocore.git I59bf4b4b3ed14766a5a5285923d1ffa9fc8b2294 (> 1.4.0)
Change-Id: I504ca776d88fd852bbaef07060c125980db3fdd7
When endpoints become unavailable when MDCX/CRCX/DLCX are executed on
them a major problem may be the cause, lets make sure that those events
are logged.
Change-Id: I059b7e29f960e75a53bfb5dfb2b83ab3d79e84f3
The file mgcp_internal.h still contains mostly definitions and types
that are relevant for mgcp_network.c and mgcp_protocol.c. Lets give
the network and protocol module its own header files, also move stuff
that does not relate to protocol and network to the appropiate places.
Change-Id: I837eaad771ed7252304db4a81c37953b70766fff
Currently only the endpoint handling for E1 exists, but there is no
actual code behind it that handles the E1 traffic.
Change-Id: I6b93809b5ac7d01af55888347dd787b0bc997ae1
Related: OS#2659
The function allocate_port() has pointer a variable end, it even does an
OSMO_ASSERT on it, but it never uses it. Lets remove it.
Change-Id: I369361389c6276e5511c683ebd630093713bdd37
E1 endpoint names also represent different rates, this may mean that
some rate / subslot combinations are not possible because they overlap
within nthe timeslot. When the equipment (BSC) is properly configured,
this will be no problem, however invalid configuration may cause the
selection of overlapping endpoints and this needs to be prevented, and
logged. Also rate counters need to be in place.
Change-Id: I18e90b10648a7e504371179ad144645fc82e1c27
Related: OS#2547
Pau Espin
Eric Wild
Philipp Maier