This was introduced a week ago in Change-Id
I3c937306a011715e163a40bc8ef8ec7e8d4e5d08 and is now cleaned up.
Change-Id: Iaadf941aa7f1c5ae05eb02b51cc646b7b5587ba3
So far, the RNC-Id is hard-coded as 23. Still use 23 as default, but allow
configuring by config file. Hence make it possible to run multiple osmo-hnbgw
with differing RNC-Id each.
Change-Id: I374f558cc4bb36055f39efe9c58ae1b9bd49da46
UNITDATA is connection-less, and as can be observed further below, the 'map'
doesn't get used in the N_UNIDATA case.
Related: OS#2776
Change-Id: Ic35562e6d7bfa54b6be859860657f9a235ad5a50
When an id-Disconnect is received, the RUA to SCCP user context becomes unused.
Mark the context map as inactive in that case. It will be cleaned up by the
context map garbage collector.
Related: OS#2776
Change-Id: I9616f72bfa566de081098ee13e720ff0f5266c77
The context map garbage collector removes entries from the list, hence it must
use llist_for_each_entry_safe().
We haven't hit this before since nothing is yet flagging context maps to be
discarded.
Related: OS#2776
Change-Id: I9d5899923054d1bf862d542fec862fb1e6f07dce
Instead of listing each and every context map, rather output a summary of
context counts.
Rationale: in a list of a hundred HNBs, I don't want to also see a dozen (or
potentially thousands of) context map lines for each. Furthermore, the conn IDs
aren't necessarily useful on network traces either.
For example, what was shown as SUA Id is incidentally the SCCP Reference, but
this is not a hard requirement and may change. Also, the reference is shown in
wireshark as a hex in mismatching byte order ... so rather don't bother.
The result now looks like
OsmoHNBGW> show hnb all
HNB (r=192.168.0.124:29169<->l=192.168.0.9:29169) "000295-0000152614@ap.ipaccess.com"
MCC 901 MNC 70 LAC 14357 RAC 11 SAC 1 CID 8595638 SCCP-stream:HNBAP=0,RUA=0
IuCS: 1 contexts: inactive-reserved:1
IuPS: 1 contexts: active:1
1 HNB connected
Related: OS#2772 OS#2773
Change-Id: Iae76b68e85863c8663bb5c508b85534c00e1d2c9
Looking at hnbap_decode_hnbregisterrequesties(), I noticed a segfault if
decoding the HNB Register Request PDU fails, which is due to an unchecked
return value in code generated by asn1tostruct.py.
Add return value and NULL pointer checks and hence fix null dereference on
erratic PDUs across HNBAP, RUA and RANAP protocols. Similar checks exist in
other places, this one was simply missing.
Since the result of asn1tostruct.py is not committed, here is an example diff
of the resulting change, of which there are 128 instances in total:
@@ -304,7 +329,12 @@
memset(hnbRegisterRequestIEs, 0, sizeof(HNBRegisterRequestIEs_t));
HNBAP_DEBUG("Decoding message HNBRegisterRequestIEs (%s:%d)\n", __FILE__, __LINE__);
- ANY_to_type_aper(any_p, &asn_DEF_HNBRegisterRequest, (void**)&hNBRegisterRequest_p);
+ tempDecoded = ANY_to_type_aper(any_p, &asn_DEF_HNBRegisterRequest, (void**)&hNBRegisterRequest_p);
+
+ if (tempDecoded < 0 || hNBRegisterRequest_p == NULL) {
+ HNBAP_DEBUG("Decoding of message HNBRegisterRequestIEs failed\n");
+ return -1;
+ }
for (i = 0; i < hNBRegisterRequest_p->hnbRegisterRequest_ies.list.count; i++) {
IE_t *ie_p;
Change-Id: I6cb9cc9a88d22f03befa43f0968a874476fa079d
Before, MCC and MNC were always reported as zero, now the output of 'show hnb all' looks like:
OsmoHNBGW> show hnb all
HNB "000295-0000154153@ap.ipaccess.com" MCC 901 MNC 70 LAC 11111 RAC 99 SAC 65535 CID 1048575
HNBAP ID 0 RUA ID 0
Change-Id: Iae094b36fa1cf18e07ed33914b9425368d7cd34b
in many functions, the returncode (rc) from the IE encoder functions
is not checked.
Add a return code check and log error message (like it is already
done in the functions which already check the return code)
Change-Id: I592c0794a94c50fde5c574b1e9bc581eb28af4ae
add ranap_transp_assoc_decode() to decode the port information from
an RANAP_IuTransportAssociation_t field.
add ranap_transp_layer_addr_decode() to decode the ip-address from
an RANAP_TransportLayerAddress_t field.
Change-Id: I3c1a0455c5f25cae41ee19229d6daf299e023062
ranap_common.c:282 col 45: warning: format ‘%u’ expects argument of type ‘unsigned int’, but argument 4 has type ‘RANAP_CauseNon_Standard_t {aka const long int}’ [-Wformat=]
ranap_common.c:527 col 15: warning: implicit declaration of function ‘asn1str_to_u16’; did you mean ‘asn_strtol’? [-Wimplicit-function-declaration]
ranap_common.c:546 col 11: warning: unused variable ‘addr’ [-Wunused-variable]
Change-Id: I0b399e78fa7b202a36e5e4be86f338c0ceb9823e
We used to have hardcoded 2323 from early development, use the proper
libosmocore definition instead.
Depends: Ife52a968a41cb286f640006587877971ff66c1a4 (libosmocore)
Change-Id: Id67d89695ebdc6288f507338c15ad773b8adf6e4
Introduce a list of LAC+RAC entries for each RNC, hence allow serving more than
one LAC per OsmoHNBGW.
iu_client is used by OsmoMSC and OsmoSGSN, both will be able to page
successfully in a setup with multiple LACs (read: multiple hNodeB) connected to
an OsmoHNBGW.
Ensure that each LAC,RAC is registered with at most one RNC Id. If a LAC,RAC
shows up on a different RNC Id than before, move it over to the new RNC Id.
Future patches should probably add:
* timeouts of RNC Id / LAC,RAC validity, to remove unused entries.
* VTY/CTRL commands to introspect which RNCs and LAC,RACs are listed.
* VTY/CTRL commands to remove RNC Id / LAC,RAC entries.
Change-Id: I189f8e2663353276b1c615d2f78455dafe568045
It's not necessary to set a local IP to connect to OsmoSTP with, 'any' is as
good as any.
Related: OS#2663
Change-Id: If5d0a1500de5e2c4b80acf025761d0264a8a51a0
The current default point-code for OsmoMSC is 0.23.1 and for OsmoSGSN 0.23.4.
See https://osmocom.org/projects/cellular-infrastructure/wiki/Point_Codes.
Before this patch, osmo-hnbgw requires a cs7 config and explicit point-codes
for MSC and SGSN as well as a local one. Provide default config if none is
provided:
Use above default point-codes if no MSC and/or SGSN address are provided. Also
create a default cs7 instance with local PC 0.23.5.
This allows completely omitting cs7 instance and SCCP addresses from
osmo-hnbgw.cfg in a single-box setup.
Change-Id: I056547f26858d3ad52e66a15f7a4273dcc300e97
The sanitize build complains about writing to a uint32_t that is not 4-byte
aligned. Instead, write the uint32_t by memcpy.
For that, move the common ntohl() to the top and store in a local uint32_t,
memcpy() from that in both code paths.
Change-Id: Iacdd15421f824dd009448a96355b533dff28258b
Fix various mem leaks in the testing code.
Add test_common_cleanup() in test_common.c, to free talloc contexts; call in
test-{helpers,hnbap,ranap}.c. Upon talloc ctx cleanup, ensure that they are
actually empty, in order to catch newly introduced mem leaks.
If non-empty, print talloc context reports.
Change-Id: Ic66c005f2a264774e18bb54e58b87bef5944511c
As the default was called "defualt", it became a standard C label
and was never actually performing any default catch-all behavior.
As we didn't use -Wall, gcc never warned us about it so far :/
Change-Id: I9dbad21e75a55ad91b12d3d3ee8bd6dfb5326c3e
Since I8ac15fa2fd25bedb26297177e416976a5389b573 in July 2017 we are
not using sctp_*() functions directly anymore but go via
libosmo-sigtran. However, some dead code remained in hnbgw.c, which
means that linkage will fail if compiled without any optimization,
i.e. without -O present.
Change-Id: Ifbcb21d43e17bf512bc7b219e590410e06c434ca
This is actually default in all other osmocom projects, and it's a
big surprise that it hadn't been enabled for osmo-iuh. Now we finally
can see that there are e.g. unused static functions in the code.
Change-Id: I8d52b11e3f476ffd77f3ab185b679817cd3b2163
The stp_host is just the *default* that may be overridden by the VTY
configuration. Don't log it as the one that is going to be used.
It's not trivial to print the actual IP address being used, there may be any
number of ASP, theoretically. Hence leave logging up to
osmo_sccp_simple_client_on_ss7_id(), after another hypothetical patch.
Change-Id: Ia438143606913faccc8cdf4fd5f7d376f93e7891
unused since change-id Ic6a645a93406670d58eb5edf5f2f2e1266168c92
"osmo-hnbgw: Avoid useless linking to libosmogsm and libsctp"
Change-Id: I4241a1d84b54a77a6a6dad809f8ec921f45ba4bc
vty_install_default() and install_default() will soon be deprecated.
Depends: I5021c64a787b63314e0f2f1cba0b8fc7bff4f09b
Change-Id: I61b79f633d36814b53e40f1a92b5847c9ff4fde0
This fixes the following dh-shlibdeps warnings:
Change-Id: I08be684c45c7e95315dba6ccf9892fe6fc7c3f24
dpkg-shlibdeps: warning: symbol install_element used by debian/libosmo-ranap1/usr/lib/x86_64-linux-gnu/libosmo-ranap.so.1.0.0 found in none of the libraries
dpkg-shlibdeps: warning: symbol vty_out used by debian/libosmo-ranap1/usr/lib/x86_64-linux-gnu/libosmo-ranap.so.1.0.0 found in none of the libraries
This fixes the following dpkg-shlibeps warnings:
Change-Id: Ic6a645a93406670d58eb5edf5f2f2e1266168c92
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/osmo-hnbgw/usr/bin/osmo-hnbgw was not linked against libosmogsm.so.8 (it uses none of the library's symbols)
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/osmo-hnbgw/usr/bin/osmo-hnbgw was not linked against libsctp.so.1 (it uses none of the library's symbols)
See osmo-ci change I2409b2928b4d7ebbd6c005097d4ad7337307dd93 for rationale.
Depends: I2409b2928b4d7ebbd6c005097d4ad7337307dd93
Change-Id: I7261e006163eda4bee8a4695fbd5bd29307babe6
We recently fixed package naming / sub-packagign in the libosmo-sccp
git repository, so now we need to depend on the proper package name.
Change-Id: I6e4f8fa96e5f39f988d6993ba3931cb7df70e905
In Change-Id I6a3f7ad15be03fb94689b4af6ccfa828c25f45c0 we introduced
the somewhat arguable combination of Iu code in libosmo-ranap. This Iu
code uses functions provided by libosmo-sigtran.
However, at the time it was overlooked to explicitly link libosmo-ranap
against libosmo-sigtran, which caused linking failures of programs
using libosmo-ranap, such as the unit tests included in this package.
Below example is from building using contrib/jenkins.sh on Ubuntu 17.04:
CCLD test-ranap
../../src/.libs/libosmo-ranap.so: undefined reference to `osmo_sccp_local_addr_by_instance'
../../src/.libs/libosmo-ranap.so: undefined reference to `osmo_sccp_tx_unitdata_msg'
../../src/.libs/libosmo-ranap.so: undefined reference to `vty_out'
../../src/.libs/libosmo-ranap.so: undefined reference to `install_element'
../../src/.libs/libosmo-ranap.so: undefined reference to `osmo_sccp_user_bind'
../../src/.libs/libosmo-ranap.so: undefined reference to `osmo_sccp_user_sap_down'
../../src/.libs/libosmo-ranap.so: undefined reference to `osmo_scu_prim_name'
../../src/.libs/libosmo-ranap.so: undefined reference to `osmo_sccp_addr_dump'
collect2: error: ld returned 1 exit status
Makefile:418: recipe for target 'test-ranap' failed
Change-Id: Ibfbcafd31c91dc630d406ec39b3b076bdb1f4c19
libosmo-sccp introduce the new signature in
564ff618004b ("sccp: make osmo_sccp_addr_name() available")
Change-Id: I5c9abba321ec182d293c33bcffea3462f8717045
ranap_iu_init() is passed an sccp instance that has a local primary point code.
Use this primary PC by default as the local address for IuCS and IuPS clients.
Remove the current vty command 'iu local-address point-code PC':
- It is possible that we would like to configure a differing local point code
at some point; this should then happen via sccp address book entries, not
parsing PC directly.
- Obtaining the local PC from the SCCP instance makes this command obsolete for
all setups we're currently aiming at: one local PC per SCCP instance.
- There are vty doc failures in this vty command, which cause osmo-msc and
osmo-bsc vty test failures; rather than fixing this, let's drop it entirely
until we see a need for it (and then do it properly with the address book).
Cosmetic: prefix the local static variable with g_* like g_sccp and g_scu and
define it in the same place. No default values are needed anymore, it gets
overwritten in ranap_iu_init().
Change-Id: I3bb7fc1cd5261d214c6ba0cccfe95f637e6db087
In the vty config, use the SCCP address book to configure the local and remote
SCCP addresses. Add VTY commands to set the remote SCCP addresses by name,
derive the ss7 instance from these addresses:
cs7 instance 1
point-code 0.23.0
sccp-address msc
point-code 0.0.1
sccp-address sgsn
point-code 0.0.2
hnbgw
iucs
remote-addr msc
iups
remote-addr sgsn
Enforce that both IuCS and IuPS use the same ss7 instance. In the future, we
may add the feature to use two separate instances.
Depends: libosmo-sccp I75c67d289693f1c2a049ac61cf2b2097d6e5687d,
Ie1aedd7894acd69ddc887cd65a8a0df4b888838c,
I85b46269dbe7909e52873ace3f720f6292a4516c
Change-Id: I33a7ba11eb7c2d9a5dc74d10fb0cf04bf664477b
Harald Welte
Neels Hofmeyr
Philipp Maier
Neels Hofmeyr