A missing 'else' in rx_upd_loc_req() causes *all* clients to be indicated as
is_ps=true regardless of the GSUP CN Domain IE that was received.
Replace that odd if cascade with a switch() that fixes the flawed logic. Hence
osmo-hlr now correctly indicates each client's is_ps, iff the client sends CN
Domain IEs in GSUP LU Request messages.
Related: OS#2796, OS#3601
Change-Id: I2c5fa9f5cae25cfd66afbf088303edff7d045a00
There are some requests that are best served inside the HLR, as it
has access to subscriber information such as MSISDN and IMSI.
This unfortunately required quite some restructuring of the USSD
related structures including the VTY syntax for adding routes.
The default config file has been updated to replicate the *#100#
built-in behavior of old OsmoNITB.
Closes: OS#2566
Change-Id: I1d09fab810a6bb9ab02904de72dbc9e8a414f9f9
We don't want any SS session to run for more than 30s. The timeout
is currently not refreshed.
If we need more comprehensive timeout handling, using osmo_fsm for SS
sessions might make sense.
Change-Id: I5c9fb6b619402d2a23fea9db99590143d85ac11a
It is a global variable, and it's sort of bogus if every C file
re-declares it as a static global variable that is assigned to the
same value as the "real" global one during start-up.
Change-Id: I6f3e50f071fb2fbbe58413b4760dc2215055a444
Tracking NULL memory contexts allows one to detect memory chunks
allocated outside the application's root context, which in most
cases are the result of some mistake.
For example, the VTY implementation still uses the NULL context,
so we have to clean up it manually until this is fixed.
At the moment we have at least one chunk allocated outside the
application's root context (excluding the VTY context):
full talloc report on 'null_context' (total 24 bytes in 2 blocks)
struct lookup_helper contains 24 bytes in 1 blocks
Change-Id: I7ea86730e090c06b2a5966ae4d04b8144b1cd20a
This makes both ASAN and Valgrind happy, because they do expect
all allocated heap chunks to be released on exit.
Change-Id: I7345dec8d06b0b71a859c16132dc0008cfe17cba
There were a few lines of dead code below the osmo_select_main()
loop, while the actual deinitialization code was a part of SIGINT
handler. Let's reanimate this dead zone by moving the code there
and introducing a global 'loop-breaker' variable.
Change-Id: I0e2d673b420193e2bdc1a92377aca542f3a19229
During the attempt to fix OS#2785 in Change-Id
I6a92ca34cdaadca9eacc774bb1ca386c325ba865, we introduced logic that
would blindly insert a subscriber *concurrently* in all VLRs/SGSNs of
the network on any update of the subscriber.
Before that patch, we didn't update the current serving SGSN/VLR,
and after the change we created subscribers in all SGSNs/VLRs, of which
all-1 are not serving the subscriber at that time.
We'll have to go back to the original behavior until a proper fix can
be introduced.
Change-Id: Ibf6f1b21b08560d4d8f41bbe7782d40abf4585f8
Related: OS#3091
Related: OS#2785
Move code to create an Insert Subscriber Data message into a common
function which can be shared by hlr.c and luop.c.
As a consequence, we always encode gsup.cn_domain in the corresponding
msgb and must adjust expected output of the 'gsup' test accordingly.
Change-Id: I6a92ca34cdaadca9eacc774bb1ca386c325ba865
Requested-by: neels
Related: OS#2785
In osmo_gsup_configure_wildcard_apn(), do not compose APN into a local buffer
that becomes invalid as soon as the function exits. Instead, use a caller
provided buf.
Fixes OS#3231 crash:
==20030==ERROR: AddressSanitizer: stack-buffer-underflow on address 0x7fffffffd9c0 at pc 0x7ffff6e9b6c2 bp 0x7fffffffd900 sp 0x7fffffffd0b0
READ of size 2 at 0x7fffffffd9c0 thread T0
#0 0x7ffff6e9b6c1 (/usr/lib/x86_64-linux-gnu/libasan.so.4+0x766c1)
#1 0x7ffff6314419 in tlv_put ../../../../src/libosmocore/include/osmocom/gsm/tlv.h:107
#2 0x7ffff6314419 in msgb_tlv_put ../../../../src/libosmocore/include/osmocom/gsm/tlv.h:299
#3 0x7ffff6314419 in encode_pdp_info ../../../../src/libosmocore/src/gsm/gsup.c:419
#4 0x7ffff6314419 in osmo_gsup_encode ../../../../src/libosmocore/src/gsm/gsup.c:535
#5 0x555555580016 in _luop_tx_gsup ../../../src/osmo-hlr/src/luop.c:54
#6 0x5555555809d8 in lu_op_tx_insert_subscr_data ../../../src/osmo-hlr/src/luop.c:264
#7 0x55555558b356 in rx_upd_loc_req ../../../src/osmo-hlr/src/hlr.c:306
#8 0x55555558b356 in read_cb ../../../src/osmo-hlr/src/hlr.c:365
#9 0x555555586671 in osmo_gsup_server_read_cb ../../../src/osmo-hlr/src/gsup_server.c:105
#10 0x7ffff5b35911 in ipa_server_conn_read ../../../src/libosmo-abis/src/input/ipa.c:356
#11 0x7ffff5b35911 in ipa_server_conn_cb ../../../src/libosmo-abis/src/input/ipa.c:387
#12 0x7ffff5e5541f in osmo_fd_disp_fds ../../../src/libosmocore/src/select.c:216
#13 0x7ffff5e5541f in osmo_select_main ../../../src/libosmocore/src/select.c:256
#14 0x5555555791b6 in main ../../../src/osmo-hlr/src/hlr.c:600
#15 0x7ffff4707a86 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21a86)
#16 0x555555579679 in _start (/usr/local/bin/osmo-hlr+0x25679)
Address 0x7fffffffd9c0 is located in stack of thread T0 at offset 16 in frame
#0 0x7ffff63131ff in osmo_gsup_encode ../../../../src/libosmocore/src/gsm/gsup.c:481
This frame has 1 object(s):
[32, 64) 'bcd_buf' <== Memory access at offset 16 underflows this variable
Related: OS#3231
Change-Id: I83d9ef2868bbb01e3f1ddb7920fe735aca172b15
In rx_upd_loc_req() we set the connection's supports_ps field but
forgot to also set the equivalent field in the corresponding luop.
Change-Id: Ie175a067ac1324cdd39d7f756a40fab923421793
Related: OS#2785
This function relied on implementation details of the luop code.
Port what is necessary for an independent Insert Subscriber Data
Tx operation from the luop code into this function.
A next possible step would be to try to merge both of these
into a common implementation. This will be addressed in a
follow-up change as soon as this change is merged.
The TTCN3 test TC_vty_msisdn_isd is still passing (it currently
triggers the "circuit switched domain" case because it does not
advertise itself as an SGSN in the IPA unit name).
Change-Id: I06c43ece2b48dc63d599000eb6d6d51e08963067
Related: OS#2785
Add a function which triggers subscriber update notifications to
all connected GSUP clients, and invoke it when the MSISDN of a
subscriber is changed via VTY.
This makes the TTCN3 HLR test TC_vty_msisdn_isd pass.
Note that the new function currently relies on implementation
details of the Location Update Operation (luop) code.
Because of this we currently log a slightly misleading message
when the updated Insert Subscriber Data message is sent:
"luop.c:161 LU OP state change: LU RECEIVED -> ISD SENT"
This message is misleading because, in fact, no location update
message was received from a GSUP client at that moment.
So while this change fixes the externally visible behaviour, we may
want to follow this up with some refactoring to avoid relying on
luop internals. It seems acceptable to do that in a separate step
since such a change will be more involved and harder to review.
We may want to trigger such notifications in other situations as well.
This is left for future work, too. There are no TTCN3 test cases for
other situations yet, as far as I can see.
Related: OS#2785
Change-Id: Iffe1d7afb9fc7dbae542f70bbf5391ddc08a14b4
When performing PURGE MS, OsmoHLR before this patch used toreturn
an error even in the successful case. The reasone for this is some
wrong assumptions about the return values of db_subscr_purge().
Change-Id: Ie3005e2eeb424715fd77f202e9fe18464ba211b7
For unknown IMSI and no auth data for a known IMSI, log respective messages on
NOTICE level.
For database error, log on ERROR level.
Change-Id: I3838fa78567e7e92d797d90b8b90865d9ebba90a
Differentiate between "IMSI unknown" and "IMSI has no auth data": in case of
known IMSI lacking auth data, return -ENOKEY instead of -ENOENT.
Fix API doc comments to reflect what the functions actually return, on top of
adding the -ENOKEY detail.
Adjust db_test expectations from -ENOENT to -ENOKEY where appropriate.
Adjust VTY and CTRL command rc evaluation.
A subsequent patch will use these return values to log details on each of these
situations.
Change-Id: Icf6304d23585f2ed45e050fa27c787f2d66fd3f7
If we have a subscriber entry that lacks auth data, we currently return
GMM_CAUSE_NET_FAIL, which in the MSC log looks like the HLR is not connected or
something grave. Instead, return GMM_CAUSE_IMSI_UNKNOWN.
This changes the OsmoMSC log in this way:
Before:
DVLR <001e> VLR_Authenticate(901700000014701)[0x5555558dabb0]{VLR_SUB_AS_NEEDS_AUTH_WAIT_AI}: GSUP: rx Auth Info Error cause: 17: Network failure
After:
DVLR <001e> VLR_Authenticate(901700000014701)[0x5555558dabb0]{VLR_SUB_AS_NEEDS_AUTH_WAIT_AI}: GSUP: rx Auth Info Error cause: 2: IMSI unknown in HLR
A better cause value would be something that says "IMSI known, but we have no
auth data", but since such cause value is not defined, the plain "IMSI unknown"
seems to be the best match.
Change-Id: I90df7b255317df1e5d968e7ce3b9d2c404b98db8
Prepare for tweaking error handling in a subsequent patch: use switch() instead
of if().
Prepares-for: I90df7b255317df1e5d968e7ce3b9d2c404b98db8
Change-Id: I1f628aa9d62b778951726bebec8cf338444fc897
A user on openbsc@ complained that with SQLite 3.8.2, the db_test fails with
--- expected
+++ stderr
-DDB (2067) abort at 18 in [INSERT INTO subscriber (imsi) VALUES ($imsi)]: UNIQUE constraint failed: subscriber.imsi
+DDB (2067) abort at 35 in [INSERT INTO subscriber (imsi) VALUES ($imsi)]: UNIQUE constraint failed: subscriber.imsi
i.e. a trivial difference in the error message issued by SQLite.
For db_test, don't output any SQLite error messages: Add argument
enable_sqlite_logging, pass as true, except in db_test.c.
Remove the SQLite error messages from expected output.
(Note that there is a src/db_test.c program that's not of interest here, this
is about the tests/db/db_test.c)
Change-Id: I2513d71cc0072aef8d08f47d0a1959f311176229
It appears that hlr_subscriber.imsi is 16 buffers in size:
15 chars for IMSI + 1 byte NUL. However, osmo_gsup_message.imsi
is 17 bytes (for whatever reason), so we cannot simply do a strpy()
as this might overflow the hlr_subscriber.imsi field!
TODO: check if weactually ever receive a too-long IMSI in GSUP and
reject that at an earlier time in the code flow.
Fixes: Coverity CID#164746
Change-Id: I9ff94e6bb0ad2ad2a7c010d3ea7dad9af0f3c048
Cosmetically prepare for adding new CTRL commands in hlr_controlif_setup():
- drop unused 'gs' param.
- use ctrl_interface_setup_dynip2(), so far with default CTRL nodes; custom
nodes will be added soon.
Prepares: I98ee6a06b3aa6a67adb868e0b63b0e04eb42eb50
Change-Id: I63004a7953b04988449697dbc5d55d7ed0c6d82d
Use named parameters in the SQL statements.
Use db_bind_* functions to drop some code dup.
Adopt error handling (rc and logging) to match the other db functions: return
-ENOENT for unknown subscriber, -EIO for SQL failures.
Change-Id: Iad49d29b90a708c6cf55bfb3bcc02d9e29001a15
Add ind_bitlen column to auc_3g to record each USIM's IND size according to
3GPP TS 33.102 -- default is 5 bits, as suggested by the spec.
Introduce auc_3g_ind to each connecting GSUP client to use as IND index for
generating auth tuples sent to this client.
With osmo_gsup_server_add_conn(), implement a scheme where clients receive
fixed auc_3g_ind indexes based on the order in which they connect; each new
connection takes the lowest unused auc_3g_ind, so in case one of the clients
restarts, it will most likely receive the same auc_3g_ind, and if one client
disconnects, no other clients' auc_3g_ind are affected.
Add gsup_server_test.c to test the auc_3g_ind index distribution scheme.
Depends: libosmocore I4eac5be0c0b2cede04464c4c3a0873102d952453 for llist_first
Related: OS#1969
Change-Id: If4501ed4ff8e923fa6fe8b80c44c5ad647a8ed60
Add commands to enable/disable Packet Service for a given IMSI. Changes
are synced to DB and propagated at runtime to SGSN (in case of disable
command).
Change-Id: I23163ce8667292443ed61cb15c928357dba4b4be
Related: OS#1645
Introduce g_hlr of type 'struct hlr' which holds pointers to all
globally accessible variables.
Change-Id: I275d3d54482f696e3378606b2406c7e0ad939e0f
Related: OS#1645
Create luop.(c|h) and move lu_operation and corresponding TX
functions there to facilitate re-use in upcoming control interface.
Change-Id: Ic55a45d56b37be2ba43d96f7da2af43b46af9813
Related: OS#1645
* move common copy-pasted code to initialize GSUP message into static
function
* use osmo_strlcpy() to copy imsi for added safety
Change-Id: Icd6e2479aa111ff820d53711222d46c6522033e6
Add config file, mainly for logging control.
Open VTY on the OMSO_VTY_PORT_HLR added to libosmocore in
commit 92fa18e6b800a27aa064a5fb8321cddd7383ae20
aka change-id I08cb52d9399a27e6876e45da36f434708c4fddef.
Add hlr_vty.h/c for standard VTY setup.
Add -c option to pass config file.
Add --version option.
Change-Id: Iedb884345a597371a337b0c67eb6013b7d5d1ce1
Parse commandline options, supporting general Osmocom options as copied from
osmo-nitb (bsc_hack.c): version, logging and daemonize options.
Set the HLR database file from cmdline option, log the filename in db_open().
(VTY config file in next patch.)
Change-Id: I279d517e1310e398b0a2382349e62be8e65364c1
Create hlr_ctx and pass on to DB and GSUP server code.
Add call msgb_talloc_ctx_init(hlr_ctx).
Instead of printing the entire talloc context on exit, just print the hlr_ctx
upon SIGUSR1 (like our other binaries do). Otherwise we will get pages of
talloc output on each program exit as soon as we add a VTY (next patch).
Change-Id: I3c64cb4ad7a681b88c7409296ad3afeb8000e2a4
Add APN '*' to PDP info part of GSUP response to make it possible to
test SGSN 'auth-policy remote'.
Change-Id: I95d69508aafc13e82f5f51fc6fe8f56cd7f45e2b
Related: OS#1794
Using this procedure, the VLR/SGSN can set the cs/ps purged
flag for the subscriber. We might not even need to store this
persistent in the database according to spec, but let's do it anyway, at
least until it turns out to be a performance issue.
When responding to a SendAuthInfo.req, we need to differentiate
an error case caused by an unknown IMSI, or an error caused by
an error regarding accessing the database or data integrity.
We also introduce a 'gsup_router' which enables us to route
a transaction to a given VLR. It works based on the SERIAL attribute
communicated at time of the IPA multiplex setup as part of the CCM
sub-protocol.
Neels Hofmeyr
Harald Welte
Pau Espin
Neels Hofmeyr