244 lines
5.3 KiB
Cheetah
244 lines
5.3 KiB
Cheetah
#
|
|
# logger:
|
|
#
|
|
# o Set OGS_LOG_INFO to all domain level
|
|
# - If `level` is omitted, the default level is OGS_LOG_INFO)
|
|
# - If `domain` is omitted, the all domain level is set from 'level'
|
|
# (Nothing is needed)
|
|
#
|
|
# o Set OGS_LOG_ERROR to all domain level
|
|
# - `level` can be set with none, fatal, error, warn, info, debug, trace
|
|
# level: error
|
|
#
|
|
# o Set OGS_LOG_DEBUG to mme/emm domain level
|
|
# level: debug
|
|
# domain: mme,emm
|
|
#
|
|
# o Set OGS_LOG_TRACE to all domain level
|
|
# level: trace
|
|
# domain: core,s1ap,nas,fd,gtp,mme,emm,esm,event,tlv,mem,sock
|
|
#
|
|
logger:
|
|
file: ${mme.log_filename}
|
|
level: info
|
|
|
|
mme:
|
|
freeDiameter: ${mme.diameter_filename}
|
|
s1ap:
|
|
- addr: ${epc.run_addr}
|
|
gtpc:
|
|
- addr: ${epc.run_addr}
|
|
gummei:
|
|
plmn_id:
|
|
mcc: ${epc.mcc}
|
|
mnc: ${epc.mnc}
|
|
mme_gid: 2
|
|
mme_code: 1
|
|
tai:
|
|
plmn_id:
|
|
mcc: ${epc.mcc}
|
|
mnc: ${epc.mnc}
|
|
tac: 7
|
|
security:
|
|
integrity_order : [ EIA2, EIA1, EIA0 ]
|
|
ciphering_order : [ EEA0, EEA1, EEA2 ]
|
|
network_name:
|
|
full: Open5GS
|
|
mme_name: open5gs-mme0
|
|
|
|
#
|
|
# sgwc:
|
|
#
|
|
# <GTP-C Client>
|
|
#
|
|
# o Specify SGW addresses the GTP-C must connect to
|
|
#
|
|
# o One SGW is defined.
|
|
# If prefer_ipv4 is not true, [fe80::2%lo] is selected.
|
|
# gtpc:
|
|
# addr:
|
|
# - 127.0.0.3
|
|
# - fe80::2%lo
|
|
#
|
|
# o Two SGW are defined. MME selects SGW with round-robin manner per UE
|
|
# gtpc:
|
|
# - addr: 127.0.0.3
|
|
# - addr: fe80::2%lo
|
|
#
|
|
# o Three SGW are defined. MME selects SGW with round-robin manner per UE
|
|
# gtpc:
|
|
# - addr
|
|
# - 127.0.0.3
|
|
# - fe80::2%lo
|
|
# - addr
|
|
# - 127.0.0.22
|
|
# - fe80::12%lo
|
|
# - name: sgw3.open5gs.org
|
|
#
|
|
# <SGW Selection Mode>
|
|
#
|
|
# o Round-Robin
|
|
#
|
|
# gtpc:
|
|
# addr: 127.0.0.3
|
|
# addr: 127.0.2.2
|
|
# addr: 127.0.4.2
|
|
#
|
|
# o SGW selection by eNodeB TAC
|
|
# (either single TAC or multiple TACs, DECIMAL representation)
|
|
#
|
|
# gtpc:
|
|
# - addr: 127.0.0.3
|
|
# tac: 26000
|
|
# - addr: 127.0.2.2
|
|
# tac: [25000, 27000, 28000]
|
|
#
|
|
# o SGW selection by e_cell_id(28bit)
|
|
# (either single or multiple e_cell_id, HEX representation)
|
|
#
|
|
# gtpc:
|
|
# - addr: 127.0.0.3
|
|
# e_cell_id: abcde01
|
|
# - addr: 127.0.2.2
|
|
# e_cell_id: [12345, a9413, 98765]
|
|
#
|
|
sgwc:
|
|
gtpc:
|
|
- addr: ${epc.addr_sgwc}
|
|
|
|
#
|
|
# smf:
|
|
#
|
|
# <GTP-C Client>
|
|
#
|
|
# o By default, the SMF uses the first SMF node.
|
|
# - To use a different APN for each SMF, specify gtpc.apn as the APN name.
|
|
# - If the HSS uses WebUI to set the SMF IP for each UE,
|
|
# you can use a specific SMF node for each UE.
|
|
#
|
|
# o Two SMF are defined. 127.0.0.4:2123 is used.
|
|
# [fe80::3%lo]:2123 is ignored.
|
|
# gtpc:
|
|
# - addr: 127.0.0.4
|
|
# - addr: fe80::3%lo
|
|
#
|
|
# o One SMF is defined. if prefer_ipv4 is not true,
|
|
# [fe80::3%lo] is selected.
|
|
# gtpc:
|
|
# - addr:
|
|
# - 127.0.0.4
|
|
# - fe80::3%lo
|
|
#
|
|
# o Two SMF are defined with a different APN.
|
|
# - Note that if SMF IP for UE is configured in HSS,
|
|
# the following configurion for this UE is ignored.
|
|
# gtpc:
|
|
# - addr: 127.0.0.4
|
|
# apn: internet
|
|
# - addr: 127.0.0.5
|
|
# apn: volte
|
|
#
|
|
# o If APN is omitted, the default APN uses the first SMF node.
|
|
# gtpc:
|
|
# - addr: 127.0.0.4
|
|
# - addr: 127.0.0.5
|
|
# apn: volte
|
|
smf:
|
|
gtpc:
|
|
- addr: ${epc.addr_smf}
|
|
|
|
#
|
|
# parameter:
|
|
#
|
|
# o Number of output streams per SCTP associations.
|
|
# sctp_streams: 30
|
|
#
|
|
# o Disable use of IPv4 addresses (only IPv6)
|
|
# no_ipv4: true
|
|
#
|
|
# o Disable use of IPv6 addresses (only IPv4)
|
|
# no_ipv6: true
|
|
#
|
|
# o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
|
|
# prefer_ipv4: true
|
|
#
|
|
# o Enable Multicast traffic to the UE
|
|
# multicast: true
|
|
#
|
|
# o Disable Stateless Address Autoconfiguration for IPv6
|
|
# no_slaac: true
|
|
#
|
|
# o Use OAI UE
|
|
# - Remove HashMME in Security-mode command message
|
|
# - Use the length 1 of EPS network feature support in Attach accept message
|
|
# use_openair: true
|
|
#
|
|
parameter:
|
|
|
|
#
|
|
# max:
|
|
#
|
|
# o Maximum Number of UE per AMF/MME
|
|
# ue: 1024
|
|
# o Maximum Number of gNB/eNB per AMF/MME
|
|
# gnb: 32
|
|
#
|
|
max:
|
|
|
|
#
|
|
# pool:
|
|
#
|
|
# o The default memory pool size was set assuming 1024 UEs.
|
|
# To connect more UEs, you need to increase the size further.
|
|
#
|
|
# - Pool-size 128 => 65536 Number
|
|
# - Pool-size 256 => 16384 Number
|
|
# - Pool-size 512 => 4096 Number
|
|
# - Pool-size 1024 => 1024 Number
|
|
# - Pool-size 2048 => 512 Number
|
|
# - Pool-size 8192 => 128 Number
|
|
# - Pool-size 1024*1024 => 8 Number
|
|
#
|
|
# 128: 65536
|
|
# 256: 16384
|
|
# 512: 4096
|
|
# 1024: 1024
|
|
# 2048: 512
|
|
# 8192: 128
|
|
# big: 8
|
|
#
|
|
pool:
|
|
|
|
#
|
|
# sctp:
|
|
#
|
|
# o heartbit_interval : 5000 (5secs)
|
|
# o rto_initial : 3000 (3secs)
|
|
# o rto_min : 1000 (1sec)
|
|
# o rto_max : 5000 (5secs)
|
|
# o max_num_of_ostreams : 30
|
|
# o max_num_of_istreams : 65535
|
|
# o max_attempts : 4
|
|
# o max_initial_timeout : 8000(8secs)
|
|
# o usrsctp_udp_port : 9899
|
|
#
|
|
sctp:
|
|
|
|
#
|
|
# time:
|
|
#
|
|
# o Message Wait Duration (Default : 10,000 ms = 10 seconds)
|
|
#
|
|
# o Message Wait Duration (3000 ms)
|
|
# message:
|
|
# duration: 3000
|
|
#
|
|
# o Handover Wait Duration (Default : 300 ms)
|
|
# Time to wait for MME to send UEContextReleaseCommand
|
|
# to the source eNB after receiving HandoverNotify
|
|
#
|
|
# o Handover Wait Duration (500ms)
|
|
# handover:
|
|
# duration: 500
|
|
time:
|