a8263f40e9
To expand the test capacities we would like to introduce
Android UEs as new modems. Currently the following tests
are supported:
- Ping
- iPerf3 DL/UL
- RRC Mobile MT Ping
In the following is a small description.
Prerequisites:
- Android UE
- Rooted (Ping, iPerf, RRC Idle MT Ping)
- Qualcomm baseband with working diag_mdlog (RRC Idle MT Ping)
- iPerf3
- Dropbear
- OGT Slave Unit
- Android SDK Platform-Tools
(https://developer.android.com/studio/releases/platform-tools#downloads)
- Pycrate (https://github.com/P1sec/pycrate)
- SCAT
clone https://github.com/bedrankara/scat/ & install dependencies
checkout branch ogt
symlink scat (ln -s ~/scat/scat.py /usr/local/bin/scat)
Infrastructure explaination:
The Android UEs are connected to the OGT Units via USB. We
activate tethering and set up a SSH server (with Dropbear).
We chose tethering over WiFi to have a more stable route
for the ssh connection. We forward incoming connections to
the OGT unit hosting the Android UE(s) on specific ports
to the UEs via iptables. This enables OGT to issue commands
directly to the UEs. In case of local execution we use ADB
to issue commands to the AndroidUE. The set up was tested
with 5 Android UEs connected in parallel but it should be
scalable to the number of available IPs in the respective
subnet. Furthermore, we need to cross compile Dropbear
and iPerf3 to use them on the UEs. These tools have to be
added to the $PATH variable of the UEs.
Examplary set up:
In this example we have two separate OGT units (master
and slave) and two Android UEs that are connected to the
slave unit. An illustration may be found here: https://ibb.co/6BXSP2C
On UE 1:
ip address add 192.168.42.130/24 dev rndis0
ip route add 192.168.42.0/24 dev rndis0 table local_network
dropbearmulti dropbear -F -E -p 130 -R -T /data/local/tmp/authorized_keys -U 0 -G 0 -N root -A
On UE 2:
ip address add 192.168.42.131/24 dev rndis0
ip route add 192.168.42.0/24 dev rndis0 table local_network
dropbearmulti dropbear -F -E -p 131 -R -T /data/local/tmp/authorized_keys -U 0 -G 0 -N root -A
On OGT slave unit:
sudo ip link add name ogt type bridge
sudo ip l set eth0 master ogt
sudo ip l set enp0s20f0u1 master ogt
sudo ip l set enp0s20f0u2 master ogt
sudo ip a a 192.168.42.1/24 dev ogt
sudo ip link set ogt up
Now we have to manually connect to every UE from OGT Master
to set up SSH keys and verify that the setup works.
Therefore, use:
ssh -p [UE-PORT] root@[OGT SLAVE UNIT's IP]
Finally, to finish the setup procedure create the
remote_run_dir for Android UEs on the slave unit like
following:
mkdir /osmo-gsm-tester-androidue
chown jenkins /osmo-gsm-tester-androidue
Example for modem in resource.conf:
- label: mi5g
type: androidue
imsi: '901700000034757'
ki: '85E9E9A947B9ACBB966ED7113C7E1B8A'
opc: '3E1C73A29B9C293DC5A763E42C061F15'
apn:
apn: 'srsapn'
mcc: '901'
mnc: '70'
select: 'True'
auth_algo: 'milenage'
features: ['4g', 'dl_qam256', 'qc_diag']
run_node:
run_type: ssh
run_addr: 100.113.1.170
ssh_user: jenkins
ssh_addr: 100.113.1.170
ue_ssh_port: 130
adb_serial_id: '8d3c79a7'
scat_parser:
run_type: local
run_addr: 127.0.0.1
adb_serial_id: '8d3c79a7'
Example for default-suites.conf:
- 4g:ms-label@mi5g+srsenb-rftype@uhd+mod-enb-nprb@25+mod-enb-txmode@1
Change-Id: I79a5d803e869a868d4dac5e0d4c2feb38038dc5c
|
||
|---|---|---|
| .. | ||
| bin | ||
| dbus-1 | ||
| limits.d | ||
| sudoers.d | ||
| systemd | ||
| modem-netns-setup.py | ||
| show_usb_device.py | ||