this patch adds generic support for custom frequency bands to the ms class.
it then extends the config template for AmariUE to use them.
we set the default values for EARFCNs for DL/UL to the old values.
Change-Id: I7b2250e13fc1161be1a1d73a4348f07b31c0f724
we've provided only all_log_level so far but sometimes it's needed
to select the level per layer. This patch adds the ability
to do so for the NAS layer in the UE.
Change-Id: Iab2bce65e8af81f6d344849c97952e6441cb2846
This patch enables setting cipher and integrity algorithms
in Amarisoft eNB and srsENB via scenario files. If no
settings are defined following defaults are applied:
- Cipher algorithm: EEA0, EEA2, EEA1
- Integrity algorithm: EIA2, EIA1, EIA0
Example of setting cipher algorithms:
- 4g:srsue-rftype@uhd+srsenb-rftype@uhd+mod-enb-cipher@eea1+mod-enb-cipher@eea0+mod-enb-nprb@6
Change-Id: I595206b7d49016fb6d0aec175c828d9537c53886
Remove ARFCNs as a concept from resource pool, assign a fixed ARFCN to
each BTS and TRX in the resource pools.
Using ARFCNs on specific bands as resources was an idea that is hard to
implement, because specific BTS dictate selection of bands which
influences which ARFCNs can be picked. That means reserving ARFCN
resources is only possible after reserving specific BTS resources, but
the tester is currently not capable of such two-stage resolution.
Writing handover tests, I got the problem that both BTS in a scenario
attempt to use the same ARFCN.
The by far easiest solution is to assign one fixed ARFCN to each BTS and
TRX. If ever needed, a scenario modifier can still configure different
ARFCNs.
(Due to uncertainty about OC2G operation stability, I prefer to leave
OC2G on ARFCN 50, as it happened to end up being configured before this
patch.)
Change-Id: I0a6c60544226f4261f9106013478d6a27fc39f38
this patch fixes some regressions in the Amarisoft UE class,
the config template, etc. that have been undetected bc we never
executed tests with it.
Change-Id: I397e675a4018acf3372a3b7e29fd864703b2b919
make sure to insert cell specific TAC, PCI and root seq ind
into cell config and do not depend on cell index for a particular
enb. This causes issues in multi-eNB setups.
Change-Id: I6642128a449a0562dd23f7fa393ff48ae2503006
this patch adds the basic notion of FDD and TDD duplexing modes
to the eNB object. So far we've always assume FDD.
Since only Amarisoft eNB supports TDD, the required config
template changes, etc. are only applied there.
The patch also adds a scenario to enable the default TDD config.
Change-Id: I37216b5bfdf527d221913283b6c41d3c8fd6b500
we need to make the rf_port a param in the cell list because for CA with
two cells on different EARFNCs, the RF port is different
for two cells without CA on the same EARFCN the RF port is the same
so we need to be able to configure it
Change-Id: I32e83cc34811588757104c5ce1cae7277402addd
This content is mostly specific to sysmocom's setup (thought it can
still be re-used by other people if willing to).
symlinks in ttcn3/ pointing to example/ are redone to point to
sysmocom/.
Change-Id: I364e0859c0851b9167907a4d948b659a0f6a19fb
Andre Puschmann
Pau Espin