we've added the modifier to configure Amarisoft eNB channel
model. This patch enables it for srsENB.
Change-Id: I30e65d0431b2d2792986128287caf8b23a22b2c1
Power ramping features were implemented recently for osmo-bts-trx. We
don't want to enable them because it makes phones take longer (if even
at all) to find the network.
Change-Id: I35e2f560b28eddef886ad3b2f8ffb4ff79be77da
this avoids a false negative detection when the UE attach takes a bit
longer and the first seconds all zeros are reported in the CSV
the HO test, for example, would fail in such a case as it expects
no zero TP over the course of the experiment.
Change-Id: I96dab17bb19249504dedda6659aed5eac0a65a26
this gives higher UL throughput because less resources are reserved for
SR/CQI. For more users we may have to make the value configurable again.
Change-Id: If6c313a1deafffda26e9effeb807ca71064c46bc
the WS is closed if the eNB process dies. this patch will log an
event but not stop the experiment.
Change-Id: I0fafc7e38954400540375d51813e96500700f50c
report generation failed when duration was not set correctly
and None was returned. Use 0 as duration by default.
Change-Id: Ia654c67bf2dcce432f84e869550c516d8d5a07a0
we use the otherwise unused QCI 8 as a slightly modified
version of QCI 7 (default RLC UM) with a PDCP discard
timer set to infinity to avoid dropping PDCP SDUs if
packets arive faster than can be processed in the DL
Change-Id: I06b7b583701f90827fba36564f969b5d58c9b9ad
we've noticed that the Iperf client times out too soon in
some experiment. It seems that this happens with ZMQ if
the RAT is too slow (slower than realtime) and the eNB buffers
too much data. This causes iperf to still receive DL data
for example long after the configured runtime.
Change-Id: I9b823ab22812c96920d54fb7342c8d4c578d5270
same as for srsEPC this is also required for Amarisoft MME and eNB to support, i.e. 001/01
Note that the 3 digit MNC isn't covered by this.
Change-Id: I80a84e01ec9530c285634452d7c18c17bdd595ce
Since a while ago, we avoid by default using the --logfile param to log
the json output to a different file, in order to stay compatible with
older versions of iperf3.
However, the local logfile was still being created, and was not
overwritten with the remote file with content because there's none
created remotely (due to reasons explained above).
Change-Id: I218ec28dc65febc7bd083d6d15854319bf4f3daf
srsEPC expect zero-padding MNC/MCC in config file. However,
001 and mcc will end up as 1 in the rendered template.
Therefore, they need to be formatted correctly.
Change-Id: Ie63cd1b15b961e493a6dcbd7e5a4fbabe0bb6f33
when phy.signal=1 is set in the log_options, the eNB will dump
a binary file that needs to be copied back as well
Change-Id: I63d13cb74572ac065d5a3fcfb1632552d0a6dbc6
this avoids issues when the channel emulation stops in the middle
of a high attenuation values and the device is left in this state.
Change-Id: I9aeafc68bf81b8932aac4cb28040b9aea6bfcbdb
This object allows to run the "stress" cmdline program in the background
on the specifies run_node, to simulate system load.
To run stress, a test can simply do:
stress = tenv.stress(epc.run_node())
stress.start(cpu_workers=2, mem_workers=1, io_workers=1)
And the test environment will remember to stop it when the test finishes.
Change-Id: I21023e6c64c48109f294291bfe3d8d8f4e1de038
this method uses the kpi_analyzer module for analyzing
stdout, CSV metrics and the logfile (if present).
if the module can't be loaded, no KPI will be added.
Change-Id: I28226a375f9ac4e08424c488062ae6a74a19af92
New patchelf 0.11 release is out and it has fixes hitting us in both 0.9
and 0.10 on different binaries. So let's simply requiring having
patchelf 0.11 in all cases and be done with it (actually, if not running
4G binaries, using 0.9 is enough).
Related: OS#4389
Change-Id: I2701e46e7710db4c923a68e6b3a2f3c7b126f356
every call to verify_metrics would copy back metrics again. see log here:
23:29:22.149299 run srsue(pid=31521): Terminating (SIGINT)
23:29:22.368263 run srsue(pid=31521): Terminated: ok {rc=0}
23:29:28.401035 run scp-back-metrics(pid=32265): Launched
23:29:29.423083 run scp-back-metrics(pid=32265): Terminated: ok {rc=0}
23:29:29.490275 run scp-back-metrics(pid=32271): Launched
23:29:30.513852 run scp-back-metrics(pid=32271): Terminated: ok {rc=0}
23:29:30.550862 run scp-back-metrics(pid=32277): Launched
23:29:31.573962 run scp-back-metrics(pid=32277): Terminated: ok {rc=0}
this patch only copies back metrics only once. also make sure that, similar
to logs, metrics are always copied back at the end of the run even if they
are not used for metrics checking. this is needed to run the plotting
script.
Change-Id: Ie7c156a5b2c8768bf90ff8e86515976e0d454c25
In order to set up the channel emulator we need to calculate the total
number of RF channels that a eNB has from within a test.
Change-Id: If641993033eb5dcdc6e2d6afdc8426ed322241ca
this is helpful to run some action for the exact run time of an iperf3
session. note that if no time spec is given when calling
"prepare_test_proc()", a modifier could set the runtime of an DL experiment
to an arbitrary value so we need to have a mechanism to read
the actual time from within a test
Change-Id: I484a0add322ffd269a1e9df72a00cf348950b268
tests can now use 'tenv.test().set_kpis(some_dict)' to set any kind of
data as KPIs, which will be presented in the junit report.
The representation of KPIs in the xml file doesn't follow the junit
format, mainly because it has no support for per-test properties.
Change-Id: I00e976f65a202e82d440bf33708f06c8ce2643e2
10s was too short and has still caused tests to fail because they were
stopped just before the iperf finished.
30s seems to be enought and has passed multiple times so far
Change-Id: I80b732a060356aa98882ff0e8b5debaf623ba0fb
this refactor no longer enforces blocking operation of the process.
Instead it returns the process object to the caller who
can now run either proc.launch() for non-blocking operation
or proc.launch_sync() for blocking mode.
The non-block mode allos doing other stuff in the background,
for example controlling the rfemu while running a ping.
Change-Id: Ia6372e55a8829f722e40db537d9dfd63a94d1be9
Timeout value can be specified by test in suite.conf:
config:
suite:
<suite_name>:
<test_name>:
timeout: 2 # 2 seconds timeout
Change-Id: I522f51f77f8be64ebfdb5d5e07ba92baf82d7706
This feature is not really implemented and maybe never was. In any case,
it makes sense to have that working per-test so we can specify different
values per test in case it's needed.
Change-Id: I3c1b95c10e974da87ec9abd25578d8bcc0bc55a3
process object always used timeout=300 while runnig wth launch_sync().
Let's allow replacing that value beforehand so that iperf3 can
pre-configure the process object and caller doesn't need to care about
calculating expected time.
Change-Id: I7f6c5078f648013515919aa35ebcdb3ef157b5e4
Setting the log.ctx manually is not needed anymore and it's actually
harmful since all palces where it was used, a log.Origin already in path
was being passed, causing a origin loop.
Change-Id: I0511b9f7bc59e3c7f2269ff3155d0c95db58d063
Use tailored sample rate only use for 6, 50 and 75 PRB. For all other bandwidths,
we use the full LTE rate and downsample.
With 5.76e6 as base sample rate, for example, we had some issue during the tests like:
[zmq] Error: tx time is 0.178 ms in the past (7833600 < 7835648)
[zmq] Error: tx time is 0.011 ms in the past (7835520 < 7835648)
Using a higher sample rate seems to work better.
Change-Id: I53678587b2c5e0e5dccb1b55a328ad2f1a97fc4c
the overhead with 6 PRB and MIMO is a bit higher when compared
to other PRBs resulting in lower achievable throughput
Change-Id: I63888435553bba4f7be88cc745e24472921a7fb4
rename UE helper functions to query RRC connected/idle state
and adapt tests accordingly
also add helper to retrieve assinged IP address
Change-Id: I6cd057e34b4df6a1a73695355dd6406d7e039546
the default value of 60s is too long to trigger errors in the handling
of this timer. So a 5s timer is more likely to reveal potential issues
during the test execution
Change-Id: Id7a6739487c7875c4f26a47d05978c9ea9f33873
It turned out that the Amarisoft and SRS eNB scheduler produces
slightly different maximum data rates for both UL and DL.
Change-Id: I30fa7006906d101c53ba586fb06bced3945aa960
This way tests which require a very specific config file can override
specific template files used by object classes.
Change-Id: I65d1b1e826d2d430ee83810d998b98d0ccaa07cd
After this commit, in some situations ssh related errors are printed
directly in the exception to quickly find cause of the issue.
Example:
FAIL: ping.py (5.0 sec) Error: rm-remote-dir(pid=25913): launch_sync(): local ssh process exited with status 255 (ssh: connect to host 10.42.42.110 port 22: No route to host) [trial↪4g:srsue-rftype@zmq+srsenb-rftype@zmq+mod-enb-nprb@6↪ping.py:9↪ping.py↪srsepc_10.42.42.118↪host-jenkins@10.42.42.110↪rm-remote-dir(pid=25913)]
Change-Id: Ia16c7dec96f70d761600ad6a50d9df8382d9c2c8
Before, it would show somethig like:
"""
osmo_gsm_tester.core.log.Error: Exited in error 255
"""
Now:
"""
osmo_gsm_tester.core.log.Error: rm-remote-dir(pid=24820): Exited in error 255 [trial↪4g:srsue-rftype@zmq+srsenb-rftype@zmq+mod-enb-nprb@6↪ping.py:9↪ping.py↪srsepc_10.42.42.118↪host-jenkins@10.42.42.110↪rm-remote-dir(pid=24820)]
"""
Change-Id: I8873f67a2f3df21c4dd552c92510535bf95e2c9d
That's not needed and will produce some parent loop detection in
log.find_on_stack() if logging is called under that stack frame.
Change-Id: I4ab7e8977fa9bad5c8956b7c1df1513b27bb5aa2
when calculating the dl and ul bitrate, it is required to take the
sum of all active component carriers since they are reported seperately
inside the CSV file
Change-Id: If30ec3f22ce5871f911433e6a6997e9c6e7ca210
specifiying the rx/tx_freq for the eNB is optional. But when
it's done it needs to be correct. There seems to be an issue
when mapping the freq[0-3] between srsENB and Amarisoft eNB.
So it's safe to just drop the config here altogether.
Change-Id: I70f5776173c2df5894031f68df2f6c3a900b79f8
tgz files in trials can be categorized in subdirectories, allowing to
select different bianry files at runtime based on the target run node
which is going to run them. This way for instance one can have a binary
linked against libs for eg. CentOS under run_label "centos/" or an ARM
target under "arm", and then use "run_label: arm" on the resource using
it.
Change-Id: Iaf2e97da3aff693395f44f0e93b184d4846cf6da
Since the process is run in the background through the wrapper bash
script, stdin was disabled there. By explicitly redirecting the bash
process stdin we make sure it is always able to read from it.
Change-Id: I6cb7979aae0a7457919f353cbeb4c3b78cdd4919
we've only waited when running with ZMQ but in fact we need
to always wait because the UE may need some time to
gracefully exit, i.e. send the detach request and shut down correctly.
this is checked in cleanup() and verity_metrics(), so also before copying back
the CSV metrics. But we only wait once.
Change-Id: I47e46b8ccce41c9a62d2d6866260d22c927e710d
this allows to sum dl_brate and ul_brate and perform
the known operations, like max, average, etc. on both
UL and DL bitrate combined
For examples, with this CSV ..
time;cc;pci;earfcn;rsrp;pl;cfo;dl_mcs;dl_snr;dl_turbo;dl_brate;dl_bler;ul_ta;ul_mcs;ul_buff;ul_brate;ul_bler;rf_o;rf_u;rf_l;is_attached
1999;0;1;3400;-67;59;913;27;29;0.50;10432.000000;0;2.6;20;0.0;10848.000000;0;0.0;0.0;0.0;1.0
2998;0;1;3400;-67;59;912;28;29;0.50;2136.000000;0;2.6;20;0.0;1680.000000;0;0.0;0.0;0.0;1.0
3997;0;1;3400;-69;61;909;28;29;0.50;2136.000000;0;2.6;20;0.0;1680.000000;0;0.0;0.0;0.0;1.0
.. one could calculate the average of DL and UL bit rate with:
ue.verify_metric(1e6, operation='avg', metric='dl_brate+ul_brate', criterion='gt', window=test_duration)
and veriy that it's average is greater than 1 Mbit/s
Change-Id: I5c7c80bb107fa6b93b215176e6ebbb5dc8594860
this allows to calculate the rolling average over a specific
window in time and take the maximum of that
this is useful to get average value for 30s UDP traffic for
example from the UE metrics
Change-Id: I34bbfe08dbc1f27b86c9805f54649d44d697fa18
This is useful since remote processes we run under ssh end up merging
both remote stdout and sterr into local stdout.
Change-Id: Ibbfb099a667f21641075faa1858e0b9acd706fd2
It is known that sometimes srsENB hangs until it is killed -9, specially
when using ZMQ backend. Let's use RemoteProcessSafeExit in order to make
sure it is killed in an acceptable time (srs binaries use some
preventive sigalarm 6 seconds auto-kill procedure, hence we use 7
seconds) before next test is started and potentially try to re-use the
same ENB and fails due to previous one still running.
Change-Id: I905bd753c7822feccf1c1bb59752698f1d1b85f0
The API was doing far more stuff than its name indicated. Even more
important stuff, like making sure the process is killed at the end with
-9 after ssh connection is dropped.
Change-Id: If043ecab509b34b0922824d73db916196274ec64
This allows inheriting suites or scenarios from eg. sysmocom/ dir, while
still allowing to apply new suites and scenarios on top.
Change-Id: Icecdae32d400a6b6da2ebf167c1c795f7a74ae96
It has been notified that current configuration system is difficult to
understand and to use, so it has been envisioned to refactor it a bit.
The idea is that the user passes a -c path/to/main.conf file, which in
turn contains whatever osmo-gsm-tester main settings supports (basically
what old paths.conf used to be, plus some files harcoded to the same -c
directory are now configurable through the main configuration file).
Change-Id: Ieca65b71b543c44cfcec8e83efd0fe053c432e55
smpplib modules are used in several places, so it's not enough to import
them in the constructor since they are only imported for the function
scope.
Change-Id: I6511e28c7ef6aa86e85a7e03aa10a67d87896588
numpy is used in a few places in the class code so we need to jhave it
available in a bigger scope, while still only loading when needed.
Change-Id: Iea66e623e1c980a62d691e20dacb00df99fdd78f
Environment variable OSMO_GSM_TESTER_CONF is marked as deprecated and an
error is logged each time it's used. Same feature is available through
"-c" command line parameters, so having the envvar only makes things
more complex for no good reason. It cannot yet be completely dropped
since some environemnt still make use of it. Give some time to users to
adapt their setups.
Other environment variables setting some config apths can be dropped
since they are not being really used in any setup.
Change-Id: I7eb69f870d0dcb5906d45ae067d6bed1aabf5862
we need to make the rf_port a param in the cell list because for CA with
two cells on different EARFNCs, the RF port is different
for two cells without CA on the same EARFCN the RF port is the same
so we need to be able to configure it
Change-Id: I32e83cc34811588757104c5ce1cae7277402addd
YAML allows it, and it will allow suites tarting with a number on its
name (like the '4g' one) to register its own schema on next commits.
Change-Id: I64e5a9d6604085d3b17eba30498a5e7a66242cc8
This test currently only works with AmarisoftENB and srsUE, because:
* srsENB has no handover support yet
* AmarisoftUE doesn't provide any known way to verify handovers.
As a result, it usually runs with following filters and modifiers:
amarisoftenb-rftype@uhd+srsue-rftype@uhd+mod-enb-ncells@2+mod-enb-meas-enable
The get_counter() API may change in the future based on information
available from other implementations.
Change-Id: I0dff4af7e3a89804a03842ad4a4d697bca3a9773
Recent commit refactoring stuff introduced an import error only
triggered when default-suites.conf is used (no -s param).
This commit fixes the issue.
Fixes: ea8c3d4b12
Change-Id: I1534cfba55c69ed5c1354175f8b5df9b656b7d82
This way we get rid of object related content in resource.py and we can
finally move it to core/ in next commit.
Change-Id: Ia5b861115ae3ae1b90149863c4265dcc730b8cd4
This way we benefit from:
* knowing which attributes are used/required by each object class and
subclass
* Having validation function definitions near the class going to use them
Change-Id: I8fd6773c51d19405a585977af4ed72cad2b21db1
similar to the eNB patches this fixes the CA and MIMO radio
parameters. In pricinple this could also be reused for the
AmarisoftUE but since we currently don't have a means to test
it I left it for a future commit.
Change-Id: I16b00009f97d61a9ab4715e5d727024661d3d0be
this patch moves the rf_dev_args creation for both eNB types
into the eNB base class, since they are identical.
the patch also fixes the arguments for all CA and MIMO configurations
Change-Id: I8ca3ed83e65dc07927385267e5970bc4f5b120d5
The B200 device being used in the physical setup doesn't support several
RF ports, so let's hardcode it to 0 for now.
Change-Id: Id4c31be2bd0c75f469e2293ade011c7b7ceedb1c
Two implementations are provided:
* Amarisoft Ctrl interface (websocket)
* Mini-Circuits Programmable Attenuator (HW, HTTP API) [1]
in Amarisoft ENBs, if no rfemu is configured explicitly, the Ctrl
interface one is used by default, while still being possible to use the
HW one.
[1] https://www.minicircuits.com/pdfs/RC4DAT-6G-60.pdf
Change-Id: Ie98a3fb9bcd2b87b96ecbb5b79e0f53981892a32
Recent commit changed the import line so it runs only when required, but
added a typo making tests uing it fail.
Change-Id: Id3e5c16adc763a9b79cc464937c541abd15f98de
Fixes: 2b959580b9
This way we don't need to manually add new imports here or drop unusued
ones. It also makes sure local imports in all our py files is correct.
For instance, running the script already caught an issue which is added
to this patch (osmo_ms_driver/__main__.py).
This new version of the script also allows specifying subsets of
features to skip when checking for dependencies. This way, for instance
somebody not willing to use a sispm powersupply can stil check all the
needed dependencies are fine.
This new tool will make it easier to slowly make some dependencies only
used by some object test classes optional (for instance, python-smpplib
if user doesn't want to run an ESME node).
It also allows to retrieve the required debian/manually installed
packages when run with "-p" option:
"""
Debian packages:
libpython3.5-minimal:amd64
python3-gi
python3-six
libpython3.5-stdlib:amd64
python3-pygments
python3-yaml
python3-mako
python3-numpy
python3-markupsafe
Modules without debian package (pip or setuptools?):
usb [dpkg-query: no path found matching pattern /usr/local/lib/python3.5/dist-packages/usb/_interop.py]
pydbus [dpkg-query: no path found matching pattern /usr/local/lib/python3.5/dist-packages/pydbus/proxy.py]
smpplib [dpkg-query: no path found matching pattern /usr/local/lib/python3.5/dist-packages/smpplib/command_codes.py]
sispm [dpkg-query: no path found matching pattern /usr/local/lib/python3.5/dist-packages/sispm/__init__.py]
"""
Change-Id: I29ddf8971837754abd930d847bd1036e8e510de6
This way we avoid unconditionally importing all subclass dependencies,
and make them optional based on whether the setup has devices of that
type or not.
Change-Id: I0d2f8b26364b45f0d837cc51078784d1d0fa7ea1
this allows to optionally specify a the GTP bind_address for a enb object
in the resources.conf
this address is then used for binding the listening socket for gtp connections
which, in turn, allows to run the enb and epc on the same host.
when gtp_bind_addr is not specified, addr is used by default
this is especially useful if eNB and EPC run on the same host
and ZMQ is used for RF between eNB and UE. Two eNB addresses
are needed in this case, one bind address and one "remote-accessable"
address for the UEs ZMQ radio to connect to
Change-Id: I4fe38f31401428ed3e74e1d0b64960f0af122d37
Some older iperf3 versions don't support the --logfile arg. Let's
instead parse the json from stdout. Old --logfile behavior is left in
code but disabled since it's a nicer (less hacky) way to get results,
because parsing from stdout means we need to avoid reading some content.
Change-Id: Ia1b7fa4dae074089878963aeddf0006aea68e31f
For some reason these classes were still not inheriting from the base
class (probably because it was added after they existed) and they
started failing after recent changes which presumed they where already
inheriting.
Change-Id: I88217baf490ec45373d0743585377ed2639a8cfd
Use the ifup script to set up the netns + configure the tun device
created by lteue. Use it also as a hook to know when the UE is attached.
Since tun setup is done by arch-optimized lte-avx(2) binaries, we also
need to give capabilitites to them (instead of allowing inheritance of
caps in general in the setcap script).
Change-Id: I1e228b1296eac8e4cb183c2faa735b0468abe124
Commit 12ae6d79a5 switched the rf_dev_type
to be in lowercase but forgot to change these conditions.
Change-Id: I91d3877381b4e6343dc4aa0465e699341ed6648d
the Amarisoft UE seems to be only working with UHD when the bandwidth
param is provided. It seems the set_bandwidth() API is used.
Change-Id: I3f20a5a8ca80c63374f0ad500fd2794e2dc45479
this commit adds basic support for configuring measurements in the
eNB config. It currently support A1, A2, and A3 events.
By default UE measurements are turned off and need to be enabled by
configuring an event with:
+mod-enb-meas-event@{name},{report_type},{value},{hysterisis},{time to trigger}
For example one can update the a2 and a3 event with:
+mod-enb-meas-event@a2,rsrq,-40,2,480+mod-enb-meas-event@a3,rsrp,6,1,512
Change-Id: Ia7657be2396886840570bc41645450a268b4cfff
the num_carriers is parsed as a string in the conf dict and therefore
needs to converted to int before matching
also changed the num_carriers to be of type UINT
Change-Id: I1386812d32e1181ba666720bbb875bf9bbce0f51
the num_cells modifier allows to create multiple cells in a single enb
both cells are by default configured for CA
Change-Id: Ie9f16ce06ee56002c01097f2d338278f09ea4337
This allows selecting modem by supported network type. It will allow
using 4G modems with type different than srsue in 4g suite in the future.
Change-Id: I38bcf6abf789f52c3ed0bee7911567fa872e2491
comma character ',' is used in the command line to split between
parameters, which means a parameter value itself couldn't contain it.
This commit allows passing a comma inside a character value by escaping
it with '\,'.
Change-Id: Ic0bd9a029137a59e8c4a32b807eba7a64fcfa51f
Older versions of srsLTe.git required passing UHD in caps to the conf
file, but that's not the case anymore. Let's use lowcase then.
Change-Id: If8a289ba110229d31b62b0d3adc1ae97324e6d27
the time is passed as a string param and is then converted
into seconds when literals "h" or "m" are found.
So it would accept 2m and would convert it to 120s, for example.
Example:
+cfg-iperf3-time@15+
Change-Id: Iff28816f83670751e9e91de31ec59b1b0ad8fc0d
* Since license_server_addr logic is generic among all amarisoft
software, let's move it to its own config category "amarisoft", which
all amarisoft classes (amarisoft_{enb,epc}.py as of now) will import
during configure().
* The license server is disabled by default (value 0.0.0.0) since the
usual case is to have a license in the local system.
* the license server can be enabled using scenario
cfg-amarisoft-license@A.B.C.D where A.B.C.D is the address to use.
Change-Id: Id5456ad9497e91370857b80ff9a389111d3611ff
* A new abstract generic base class EPC is created
* srsEPC and AmarisoftEPC inherit from that class
* options are loaded from defaults.conf in cascade. First generic "epc",
afterwards the specific enb type.
* A new scenario is added to select the EPC type to use. srsEPC is the
default unless stated by an scenario.
* AmarisoftEPC delegates setup of the tun IP address to an "ifup"
script. As a result, since we run without root permissions (ony with
CAP_NET_ADMIN), the ifup script itself is unablet o set the IP
address. To solve this, we introduce a new osmo-gsm-tester helper
script which must be installed in the slave node which can be called
through sudo to increase privileges to do so.
With this commit, I can already get srsUE<->amarisoftENB<->amarisoftEPC
to pass ping and iperf3 4g tests.
Change-Id: Ia50ea6a74b63b2d688c8d683aea11416ad40a6d3
* object class expects the amarisoft software to be placed in directory
provided by env var AMARISOFT_PATH_ENB. On local runs, it will run the
software from there. On remote runs it will copy over that directory to
the slave.
* Configuration provided works with 6 PRBs, but probably won't work for
other values (yet).
* ZMQ support not yet available, only UHD.
One can select the Amarisoft ENB by declaring it in resources.conf:
"""
- label: AmarisoftENB-B200
type: amarisoftenb
rf_dev_type: uhd
rf_dev_args: "type=b200,serial=317B9FE,recv_frame_size=9232,send_frame_size=9232"
remote_user: jenkins
addr: 10.12.1.206
"""
And running:
"""
$ export AMARISOFT_PATH_ENB=/path/to/binaries
$ osmo-gsm-tester.py ... -s 4g:amarisoftenb-rftype@uhd+srsue-rftype@UHD+mod-enb-nprb@6 -t ping
"""
Change-Id: I1ddf4962ea6438ad977382ab201b724028ca46b3
Andre Puschmann
Pau Espin