Message formats of the new messages look mostly the same (IMSI,
Message Class, Source Name, Destination Name, AN-APDU). That is, because
AN-APDU is storing results, error reasons etc. This can be seen clearly
in osmo-msc.git:
* src/libmsc/msc_a_remote.c:msc_a_remote_fsm_communicating()
* src/libmsc/msc_i_remote.c:msc_i_remote_fsm_ready()
The message squence charts in the E Procedures section are directly
based on Neels' interMSC_HO_GSUP_msgs.txt [1].
It seems that using AN-APDU made some other new IEs redundant: RR Cause,
BSSAP Cause, Session Management Cause had been added to GSUP for the MSC
handover, and are documented now, but they are currently not used in
osmo-msc.git. The new message OSMO_GSUP_MSGT_E_ABORT is not used either,
so I left a stub for it in the message format section.
I mentioned in the Source Name IE section, that source and destination
names are sent as nul-terminated strings. This is for legacy reasons,
Neels wrote a nice summary in the commit message of [2].
[1] https://osmocom.org/attachments/3720/interMSC_HO_GSUP_msgs.txt
[2] Change-Id: I9ca8c9eef104519ed1ea46e2fef46dcdc0d554eb (osmo-msc)
Related: OS#3774, OS#3619
Change-Id: I6b9f23d08cfe53c8b77f51c6afb900c2badc9e2c
Add a patch file that removes the asciidoc-dblatex dependency in
debian/control, so the package builds for debian 8. In debian 8, the
files are all in the asciidoc package, which does get installed.
The jenkins scripts will copy the source package, apply the patch, and
upload it separately to OBS [1]. A similar debian 8 patch exists for
osmo-trx.
I have also tried to do it without a patch, by changing the OBS
configuration. It is possible to bypass the dependency check from OBS
and get the build started, but there's an additional check by
dpkg-checkbuilddepends and this one does not pass. So we really need
the patch method.
[1]: Change-Id I3570599ede51b974d350064f44f77e360fafd8b0 (osmo-ci)
Related: OS#3899
Change-Id: I5b9575ceb1141961e570643a5755a2bd6b6a4254
Allow including pdf manuals in each Osmocom repositories -doc debian
package, by depending on osmo-gsm-manuals-dev.
Related: OS#3899
Example usage: I4c184c62804c0b805a0a2425a5bd0312e94e49ab (osmo-bts.git)
Change-Id: I7edb5093e5b58eb3b0f7af2376476db4026db735
Don't install the noarch osmo-gsm-manuals.pc file to
$prefix/lib/x86_64-linux-gnu/pkgconfig when building a debian package
(dpkg-buildpackage seems to set $libdir accordingly). Always install to
$prefix/lib/pkgconfig.
The debian dir for creating a package from this repository will be added
in a follow up patch.
Related: OS#3899
Change-Id: I63bc8ab6d2845751079f40383d2aa92c709ce2fe
Allow installing generated pdfs with 'make install' in all Osmocom
projects using osmo-gsm-manuals. This makes proper debian packaging of
the manuals easier.
Autotools will automatically run this file's install target, when
running 'make install' in the top source dir. Do not install anything,
when OSMO_GSM_MANUALS_NO_INSTALL is set, and set this variable for the
tests dir, so we don't install the test pdfs.
Related: OS#3899
Change-Id: I66f33172fa410681acbaef4592e9405627948705
Remove git from depends, because it isn't needed when building the
manuals from a source tarball. Avoid having git in the build
dependencies of the upcoming manuals packaging for debian.
Related: OS#3899
Change-Id: I46ad818a1d009c03357821f7c8100ecb5d62962e
Don't explicitly depend on python 3, so we don't need to have python 2
*and* python 3 installed to build osmo-gsm-manuals.
The script is short and works fine with either python version.
Related: OS#3899
Change-Id: I8af9b8159f5c7e39b905f85edd1584cb4d5a33ef
Move the "IMEI" and "IMEI Check Result" IEs from the "Session
(transaction) management" chapter (which describes session IEs) to the
"Information Elements" chapter. Add a comment to prevent this mistake in
the future.
Related: OS#2541
Change-Id: I6fd66419350e018a763b8fac3daf567b339a2637
Change-Id: I9a0536f285f98f24fec4d7318f1923782ed2e18c
Related Change-Id: Ie0150756c33c1352bc4eb49421824542c711175c
Related Change-Id: I549b6c8840a1e86caac09e77fb8bc5042d939e62
Make this part of the specification, so we can simplify libosmocore
code by knowing that error message is (request message | 0x000001).
Related: I46d9f2327791978710e2f90b4d28a3761d723d8f (libosmocore)
Change-Id: Iec1b4ce4b7d8eb157406f006e1c4241e8fba2cd6
The 'check' target is only available when including
Makefile.asciidoc.inc, which is not always the case. Some projects only
build the VTY reference. Do not depend on check, so publishing the
VTY reference for these projects is working as expected.
Related: OS#3385
Change-Id: I64aae0016095d81ca9e9ebda9a2e3336ac126639
Most likely, this was a copy-paste error. SGSN is not involved
in Supplemeptary Services handling, they are pure CS data.
Moreover, HLR is not the only entity that can initiate both
Process Supplementary Service Error and Response messages,
there is also EUSE (External USSD handling Entity).
Change-Id: I46ad7311747f2b392244c49d3df1e152e6f1bfe3
Remove leftover OsmoMSC/Makefile.am, which should have been deleted
already in Ib234fe4f4ac36c27a4ad8a8d0050c1d6874232bc ("remove OsmoMSC
files (now avail in osmo-msc.git)").
Remove the upload taget in Makefile.am, as there are not project
specific files anymore.
Related: OS#3385
Change-Id: I8716c41b03b09250e61e6a29fe9589454258fe03
Replace the symlink that points to OsmoBSC/vty/bsc_vty_additions.xml
with a copy of that file, so we can delete the OsmoBSC dir.
Change-Id: Ifbffc90d56f0fa90d2da77dd7807cd0bb197c0d7
Files were added in osmo-msc.git Change-Id
Ic3c5add3c87f0aadb1ffab668ce16be6d0805d33.
The other project specific files will be moved in future commits. One
commit per dir.
Depends: osmo-msc.git Change-Id Ic3c5add3c87f0aadb1ffab668ce16be6d0805d33
Related: OS#3385
Change-Id: Ib234fe4f4ac36c27a4ad8a8d0050c1d6874232bc
Do not publish PDFs for all projects anymore with jenkins.sh --publish
or "make publish". Extract known_hosts from jenkins.sh, and install it
along with the other shared files in OSMO_GSM_MANUALS_DIR. Add a
"publish" target to Makefile.common.inc, so we can use it from the
project repositories. Document its usage in INSTALL.txt.
No automatism for building and publishing the documentation of all
projects will be implemented in this patch series, as discussed here:
https://osmocom.org/issues/3385#note-7
(moving manuals to project repositories 19/19)
Related: OS#3385
Change-Id: Ibe0424ceace151115985896b6d43035c69067c50
Everything is in place for 'make distcheck' now.
(moving manuals to project repositories 18/19)
Related: OS#3385
Change-Id: Ie31fba3d1afd31c25489ce08169101d9ed9de536
Necessary for 'make distcheck': the files will otherwise not end up in
the dist archives.
(moving manuals to project repositories 17/19)
Related: OS#3385
Change-Id: I5a2d6e572d346addc8770d1331c9223a56635869
Force the xsltproc output file to be writable, if it exists already.
This is needed for 'make distcheck': xsltproc gives output files the
same permissions as input files. We need to change the output file in
multiple iterations in vty_reference_combine.sh, hence it must be
writable.
(moving manuals to project repositories 15/19)
Related: OS#3385
Change-Id: I693e12ee15665d01cbc50187e6cb3ca74ad0356a
Includes from other projects don't work anymore when moving project
specific manuals into other repositories.
(moving manuals to project repositories 14/19)
Related: OS#3385
Change-Id: I96933dd4dd6cac159847647f1c642215051a9aad
Define a new {srcdir} variable in Makefile.asciidoc.inc, that can be
used in all adoc files. The value is the same as the Makefile variable
$(srcdir). Use {srcdir} in the "include::" lines of all adoc files.
(moving manuals to project repositories 13/19)
Related: OS#3385
Change-Id: I823e3d534cbc9ffceb68d3ab14c9f6710ff2eb2a
Makefile.asciidoc.inc: create a symlink for the root adoc file, from
which a PDF gets generated, from the srcdir to the builddir. This file
may include other adoc files, which do not get symlinked. We need to do
this, because a2x (the program generating the PDF file) does not have a
parameter for the output file, and will otherwise generate the PDF in
the srcdir instead of the builddir. Do the same in the check target, so
the relative include paths work the same.
Makefile.asciidoc.inc, Makefile.docbook.inc: set the include paths for
the xstl parser, as well as the LaTeX compiler, so they can find the
files they need from both OSMO_GSM_MANUALS_DIR and builddir.
Makefile.asciidoc.inc, Makefile.docbook.inc: refer to the output file
$@ with $(notdir $@). This removes the path from the file, like
basename from coreutils. The output file will then be placed in the
builddir instead of the srcdir.
Makefile.vty-reference.inc: use $(srcdir) in references to vty/*.xml
files.
(moving manuals to project repositories 12/19)
Related: OS#3385
Change-Id: Ie6b212a6518f0fc29fae610a37ae6c533189278d