OsmoSGSN: update VTY reference
This is the first update since the libosmocore changes to the 'show online-help' generated output. Hence the produced document now benefits from the structural improvements: - not repeating common commands for every node; - using section names that match the VTY prompt. Drop most of the sgsn_vty_additions.xml -- they merely repeat what the online VTY doc already explains. Many of these more verbose explanations have been absorbed into the VTY online doc in osmo-sgsn.git change-id I35984014424412e91437b7ed71576aef3819cb1e. Adjust remaining sgsn_vty_additions.xml to match the new node ID scheme. Change-Id: I71863e5056ad369d2055e9882a52a00fa999ab04
This commit is contained in:
parent
a76a993503
commit
36a0a1bbb3
|
@ -1,113 +1,6 @@
|
|||
<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>
|
||||
<node id='26'>
|
||||
<child_of nodeid='4' />
|
||||
<name>SGSN Configuration Node</name>
|
||||
<description>Configure the remote GGSN, access-control and other
|
||||
attributes of the SGSN</description>
|
||||
<command id='gtp local-ip A.B.C.D'>
|
||||
<description>
|
||||
Configure the local IP address to which the SGSN should
|
||||
bind for the Gp interface (towards the GGSNs).
|
||||
|
||||
Please note that in case you would like to run the GGSN
|
||||
on the same machine as the SGSN, you can not run both on
|
||||
the same IP address. It is suggested to use 127.0.0.1
|
||||
for the SGSN and 127.0.0.2 for the GGSN in such
|
||||
situations.
|
||||
</description>
|
||||
</command>
|
||||
<command id='ggsn <0-255> remote-ip A.B.C.D'>
|
||||
<description>
|
||||
Configure a static GGSN with a given numeric identifier
|
||||
to use the specified remote IP address.
|
||||
</description>
|
||||
</command>
|
||||
<command id='ggsn <0-255> gtp-version (0|1)'>
|
||||
<description>
|
||||
Configure whether to use GTPv0 or GTPv1 towards the
|
||||
specified GSSN number.
|
||||
</description>
|
||||
</command>
|
||||
<command id='ggsn dynamic'>
|
||||
<description>
|
||||
Enable dynamic resolving of GGSNs based on DNS resolving
|
||||
the APN name like in a GRX-style setup. Changing this
|
||||
setting requires a re-start of the SGSN.
|
||||
</description>
|
||||
</command>
|
||||
<command id='grx-dns-add A.B.C.D'>
|
||||
<description>
|
||||
Use the specified IP address for DNS-resolving the AP
|
||||
names to GGSN IP addresses
|
||||
</description>
|
||||
</command>
|
||||
<command id='apn APNAME ggsn <0-255>'>
|
||||
<description>
|
||||
Map the given APN Name to the given GGSN number.
|
||||
</description>
|
||||
</command>
|
||||
<command id='apn APNAME imsi-prefx IMSIPRE ggsn <0-255>'>
|
||||
<description>
|
||||
Map the given APN Name to the given GGSN number _only_
|
||||
if the IMSI matches the given prefix.
|
||||
</description>
|
||||
</command>
|
||||
<command id='imsi-acl (add|del) IMSI'>
|
||||
<description>
|
||||
Add or delete the given IMSI to/from the global Access
|
||||
Control List.
|
||||
</description>
|
||||
</command>
|
||||
<command id='auth-policy (accept-all|closed|acl-only|remote)'>
|
||||
<description>
|
||||
Configure the Authorization policy of the SGSN. This
|
||||
setting determines which subscribers are permitted to
|
||||
register to the network.
|
||||
</description>
|
||||
</command>
|
||||
<command id='gsup remote-ip A.B.C.D'>
|
||||
<description>
|
||||
Set the IP address of the HLR (gateway) for the GSUP protocol.
|
||||
This setting only applies if auth-policy remote is used.
|
||||
</description>
|
||||
</command>
|
||||
<command id='gsup oap-id <0-65535>'>
|
||||
<description>
|
||||
Set the OAP client ID for authentication on the GSUP
|
||||
protocol.
|
||||
This setting only applies if auth-policy remote is used.
|
||||
</description>
|
||||
</command>
|
||||
<command id='gsup oap-k K'>
|
||||
<description>
|
||||
Set the OAP shared secret key K for authentication on
|
||||
the GSUP protocol.
|
||||
This setting only applies if auth-policy remote is used.
|
||||
</description>
|
||||
</command>
|
||||
<command id='gsup oap-opc OPC'>
|
||||
<description>
|
||||
Set the OAP shared secret OPC for authentication on the
|
||||
GSUP protocol.
|
||||
This setting only applies if auth-policy remote is used.
|
||||
</description>
|
||||
</command>
|
||||
<command id='access-point-name NAME'>
|
||||
<description>
|
||||
Globally allow the given APN name for all subscribers.
|
||||
</description>
|
||||
</command>
|
||||
<command id='cdr filename NAME'>
|
||||
<description>
|
||||
Set the file name for the call-data-record file,
|
||||
logging the data usage of each subscriber.
|
||||
</description>
|
||||
</command>
|
||||
<command id='cdr interval <1-2147483647>'>
|
||||
<description>
|
||||
Set the interval (in secodnds) for the call-data-record
|
||||
file.
|
||||
</description>
|
||||
</command>
|
||||
<node id='config-sgsn'>
|
||||
<description>Configure the remote GGSN, access-control and other
|
||||
attributes of the SGSN</description>
|
||||
</node>
|
||||
</vtydoc>
|
||||
|
|
File diff suppressed because it is too large
Load Diff
Loading…
Reference in New Issue