cellular-infrastructure
/
osmo-gbproxy
mirror of https://gerrit.osmocom.org/osmo-gbproxy
9
0
Fork 0
Code Issues Releases Wiki Activity
osmo-gbproxy/doc/manuals/vty/gbproxy_vty_reference.xml

1539 lines
75 KiB
XML
Raw Blame History

<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>
<node id='_common_cmds_'>
<name>Common Commands</name>
<description>These commands are available on all VTY nodes. They are listed here only once, to unclutter the VTY reference.</description>
<command id='help'>
<params>
<param name='help' doc='Description of the interactive help system' />
</params>
</command>
<command id='list [with-flags]'>
<params>
<param name='list' doc='Print command list' />
<param name='[with-flags]' doc='Also print the VTY attribute flags' />
</params>
</command>
<command id='show vty-attributes'>
<params>
<param name='show' doc='Show running system information' />
<param name='vty-attributes' doc='List of VTY attributes' />
</params>
</command>
<command id='show vty-attributes (application|library|global)'>
<params>
<param name='show' doc='Show running system information' />
<param name='vty-attributes' doc='List of VTY attributes' />
<param name='application' doc='Application specific attributes only' />
<param name='library' doc='Library specific attributes only' />
<param name='global' doc='Global attributes only' />
</params>
</command>
<command id='write terminal'>
<params>
<param name='write' doc='Write running configuration to memory, network, or terminal' />
<param name='terminal' doc='Write to terminal' />
</params>
</command>
<command id='write file [PATH]'>
<params>
<param name='write' doc='Write running configuration to memory, network, or terminal' />
<param name='file' doc='Write to configuration file' />
<param name='[PATH]' doc='Set file path to store the config, or replace if already exists' />
</params>
</command>
<command id='write memory'>
<params>
<param name='write' doc='Write running configuration to memory, network, or terminal' />
<param name='memory' doc='Write configuration to the file (same as write file)' />
</params>
</command>
<command id='write'>
<params>
<param name='write' doc='Write running configuration to memory, network, or terminal' />
</params>
</command>
<command id='show running-config'>
<params>
<param name='show' doc='Show running system information' />
<param name='running-config' doc='running configuration' />
</params>
</command>
<command id='exit'>
<params>
<param name='exit' doc='Exit current mode and down to previous mode' />
</params>
</command>
<command id='end'>
<params>
<param name='end' doc='End current mode and change to enable mode.' />
</params>
</command>
</node>
<node id='view'>
<name>view</name>
<command id='show version'>
<params>
<param name='show' doc='Show running system information' />
<param name='version' doc='Displays program version' />
</params>
</command>
<command id='show online-help'>
<params>
<param name='show' doc='Show running system information' />
<param name='online-help' doc='Online help' />
</params>
</command>
<command id='enable [expert-mode]'>
<params>
<param name='enable' doc='Turn on privileged mode command' />
<param name='[expert-mode]' doc='Enable the expert mode (show hidden commands)' />
</params>
</command>
<command id='terminal length &lt;0-512&gt;'>
<params>
<param name='terminal' doc='Set terminal line parameters' />
<param name='length' doc='Set number of lines on a screen' />
<param name='&lt;0-512&gt;' doc='Number of lines on screen (0 for no pausing)' />
</params>
</command>
<command id='terminal no length'>
<params>
<param name='terminal' doc='Set terminal line parameters' />
<param name='no' doc='Negate a command or set its defaults' />
<param name='length' doc='Set number of lines on a screen' />
</params>
</command>
<command id='who'>
<params>
<param name='who' doc='Display who is on vty' />
</params>
</command>
<command id='show history'>
<params>
<param name='show' doc='Show running system information' />
<param name='history' doc='Display the session command history' />
</params>
</command>
<command id='logging enable'>
<params>
<param name='logging' doc='Configure logging' />
<param name='enable' doc='Enables logging to this vty' />
</params>
</command>
<command id='logging disable'>
<params>
<param name='logging' doc='Configure logging' />
<param name='disable' doc='Disables logging to this vty' />
</params>
</command>
<command id='logging filter all (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='filter' doc='Filter log messages' />
<param name='all' doc='Do you want to log all messages?' />
<param name='0' doc='Only print messages matched by other filters' />
<param name='1' doc='Bypass filter and print all messages' />
</params>
</command>
<command id='logging color (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='color' doc='Configure color-printing for log messages' />
<param name='0' doc='Don&apos;t use color for printing messages' />
<param name='1' doc='Use color for printing messages' />
</params>
</command>
<command id='logging timestamp (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='timestamp' doc='Configure log message timestamping' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with current timestamp' />
</params>
</command>
<command id='logging print extended-timestamp (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='extended-timestamp' doc='Configure log message timestamping' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
</params>
</command>
<command id='logging print category (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='category' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with category/subsystem name' />
</params>
</command>
<command id='logging print category-hex (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='category-hex' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with category/subsystem nr in hex (&apos;&lt;000b&gt;&apos;)' />
</params>
</command>
<command id='logging print level (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='level' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with the log level name' />
</params>
</command>
<command id='logging print file (0|1|basename) [last]'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='file' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with the source file and line' />
<param name='basename' doc='Prefix each log message with the source file&apos;s basename (strip leading paths) and line' />
<param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
</params>
</command>
<command id='logging set-log-mask MASK'>
<params>
<param name='logging' doc='Configure logging' />
<param name='set-log-mask' doc='Set the logmask of this logging target' />
<param name='MASK' doc='List of logging categories to log, e.g. &apos;abc:mno:xyz&apos;. Available log categories depend on the specific application, refer to the &apos;logging level&apos; command. Optionally add individual log levels like &apos;abc,1:mno,3:xyz,5&apos;, where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
</params>
</command>
<command id='logging level (|gprs|ns|obj|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro|lns|lbssgp) (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='gprs' doc='GPRS Packet Service' />
<param name='ns' doc='GPRS Network Service (NS)' />
<param name='obj' doc='GbProxy object allocation/release' />
<param name='lglobal' doc='Library-internal global log family' />
<param name='llapd' doc='LAPD in libosmogsm' />
<param name='linp' doc='A-bis Intput Subsystem' />
<param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
<param name='lmi' doc='A-bis Input Driver for Signalling' />
<param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
<param name='lsms' doc='Layer3 Short Message Service (SMS)' />
<param name='lctrl' doc='Control Interface' />
<param name='lgtp' doc='GPRS GTP library' />
<param name='lstats' doc='Statistics messages and logging' />
<param name='lgsup' doc='Generic Subscriber Update Protocol' />
<param name='loap' doc='Osmocom Authentication Protocol' />
<param name='lss7' doc='libosmo-sigtran Signalling System 7' />
<param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
<param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
<param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
<param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
<param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
<param name='lrspro' doc='Remote SIM protocol' />
<param name='lns' doc='GPRS NS layer' />
<param name='lbssgp' doc='GPRS BSSGP layer' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
</params>
</command>
<command id='logging level set-all (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
</params>
</command>
<command id='logging level force-all (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the &apos;no logging level force-all&apos; command. Note: any &apos;logging level &lt;category&gt; &lt;level&gt;&apos; commands will have no visible effect after this, until the forced level is released.' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
</params>
</command>
<command id='no logging level force-all'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='force-all' doc='Release any globally forced log level set with &apos;logging level force-all &lt;level&gt;&apos;' />
</params>
</command>
<command id='logp (|gprs|ns|obj|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro|lns|lbssgp) (debug|info|notice|error|fatal) .LOGMESSAGE'>
<params>
<param name='logp' doc='Print a message on all log outputs; useful for placing markers in test logs' />
<param name='gprs' doc='GPRS Packet Service' />
<param name='ns' doc='GPRS Network Service (NS)' />
<param name='obj' doc='GbProxy object allocation/release' />
<param name='lglobal' doc='Library-internal global log family' />
<param name='llapd' doc='LAPD in libosmogsm' />
<param name='linp' doc='A-bis Intput Subsystem' />
<param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
<param name='lmi' doc='A-bis Input Driver for Signalling' />
<param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
<param name='lsms' doc='Layer3 Short Message Service (SMS)' />
<param name='lctrl' doc='Control Interface' />
<param name='lgtp' doc='GPRS GTP library' />
<param name='lstats' doc='Statistics messages and logging' />
<param name='lgsup' doc='Generic Subscriber Update Protocol' />
<param name='loap' doc='Osmocom Authentication Protocol' />
<param name='lss7' doc='libosmo-sigtran Signalling System 7' />
<param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
<param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
<param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
<param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
<param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
<param name='lrspro' doc='Remote SIM protocol' />
<param name='lns' doc='GPRS NS layer' />
<param name='lbssgp' doc='GPRS BSSGP layer' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
<param name='.LOGMESSAGE' doc='Arbitrary message to log on given category and log level' />
</params>
</command>
<command id='show logging vty'>
<params>
<param name='show' doc='Show running system information' />
<param name='logging' doc='Show current logging configuration' />
<param name='vty' doc='Show current logging configuration for this vty' />
</params>
</command>
<command id='show alarms'>
<params>
<param name='show' doc='Show running system information' />
<param name='alarms' doc='Show current logging configuration' />
</params>
</command>
<command id='show talloc-context (application|all) (full|brief|DEPTH)'>
<params>
<param name='show' doc='Show running system information' />
<param name='talloc-context' doc='Show talloc memory hierarchy' />
<param name='application' doc='Application&apos;s context' />
<param name='all' doc='All contexts, if NULL-context tracking is enabled' />
<param name='full' doc='Display a full talloc memory hierarchy' />
<param name='brief' doc='Display a brief talloc memory hierarchy' />
<param name='DEPTH' doc='Specify required maximal depth value' />
</params>
</command>
<command id='show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS'>
<params>
<param name='show' doc='Show running system information' />
<param name='talloc-context' doc='Show talloc memory hierarchy' />
<param name='application' doc='Application&apos;s context' />
<param name='all' doc='All contexts, if NULL-context tracking is enabled' />
<param name='full' doc='Display a full talloc memory hierarchy' />
<param name='brief' doc='Display a brief talloc memory hierarchy' />
<param name='DEPTH' doc='Specify required maximal depth value' />
<param name='tree' doc='Display only a specific memory chunk' />
<param name='ADDRESS' doc='Chunk address (e.g. 0xdeadbeef)' />
</params>
</command>
<command id='show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP'>
<params>
<param name='show' doc='Show running system information' />
<param name='talloc-context' doc='Show talloc memory hierarchy' />
<param name='application' doc='Application&apos;s context' />
<param name='all' doc='All contexts, if NULL-context tracking is enabled' />
<param name='full' doc='Display a full talloc memory hierarchy' />
<param name='brief' doc='Display a brief talloc memory hierarchy' />
<param name='DEPTH' doc='Specify required maximal depth value' />
<param name='filter' doc='Filter chunks using regular expression' />
<param name='REGEXP' doc='Regular expression' />
</params>
</command>
<command id='show stats'>
<params>
<param name='show' doc='Show running system information' />
<param name='stats' doc='Show statistical values' />
</params>
</command>
<command id='show stats level (global|peer|subscriber)'>
<params>
<param name='show' doc='Show running system information' />
<param name='stats' doc='Show statistical values' />
<param name='level' doc='Set the maximum group level' />
<param name='global' doc='Show global groups only' />
<param name='peer' doc='Show global and network peer related groups' />
<param name='subscriber' doc='Show global, peer, and subscriber groups' />
</params>
</command>
<command id='show asciidoc counters'>
<params>
<param name='show' doc='Show running system information' />
<param name='asciidoc' doc='Asciidoc generation' />
<param name='counters' doc='Generate table of all registered counters' />
</params>
</command>
<command id='show rate-counters'>
<params>
<param name='show' doc='Show running system information' />
<param name='rate-counters' doc='Show all rate counters' />
</params>
</command>
<command id='show fsm NAME'>
<params>
<param name='show' doc='Show running system information' />
<param name='fsm' doc='Show information about finite state machines' />
<param name='NAME' doc='Display information about a single named finite state machine' />
</params>
</command>
<command id='show fsm all'>
<params>
<param name='show' doc='Show running system information' />
<param name='fsm' doc='Show information about finite state machines' />
<param name='all' doc='Display a list of all registered finite state machines' />
</params>
</command>
<command id='show fsm-instances NAME'>
<params>
<param name='show' doc='Show running system information' />
<param name='fsm-instances' doc='Show information about finite state machine instances' />
<param name='NAME' doc='Display a list of all FSM instances of the named finite state machine' />
</params>
</command>
<command id='show fsm-instances all'>
<params>
<param name='show' doc='Show running system information' />
<param name='fsm-instances' doc='Show information about finite state machine instances' />
<param name='all' doc='Display a list of all FSM instances of all finite state machine' />
</params>
</command>
<command id='show gbproxy bvc (bss|sgsn) [stats]'>
<params>
<param name='show' doc='Show running system information' />
<param name='gbproxy' doc='Display information about the Gb proxy' />
<param name='bvc' doc='Show BSSGP Virtual Connections' />
<param name='bss' doc='Display BSS-side BVCs' />
<param name='sgsn' doc='Display SGSN-side BVCs' />
<param name='[stats]' doc='Show statistics' />
</params>
</command>
<command id='show gbproxy cell [stats]'>
<params>
<param name='show' doc='Show running system information' />
<param name='gbproxy' doc='Display information about the Gb proxy' />
<param name='cell' doc='Show GPRS Cell Information' />
<param name='[stats]' doc='Show statistics' />
</params>
</command>
<command id='show gbproxy links'>
<params>
<param name='show' doc='Show running system information' />
<param name='gbproxy' doc='Display information about the Gb proxy' />
<param name='links' doc='Show logical links' />
</params>
</command>
<command id='show gbproxy tlli-cache'>
<params>
<param name='show' doc='Show running system information' />
<param name='gbproxy' doc='Display information about the Gb proxy' />
<param name='tlli-cache' doc='Show TLLI cache entries' />
</params>
</command>
<command id='show gbproxy imsi-cache'>
<params>
<param name='show' doc='Show running system information' />
<param name='gbproxy' doc='Display information about the Gb proxy' />
<param name='imsi-cache' doc='Show IMSI cache entries' />
</params>
</command>
<command id='show nri all'>
<params>
<param name='show' doc='Show running system information' />
<param name='nri' doc='Mapping of Network Resource Indicators to this SGSN, for SGSN pooling' />
<param name='all' doc='Show all SGSNs' />
</params>
</command>
<command id='show nri nsei &lt;0-65535&gt;'>
<params>
<param name='show' doc='Show running system information' />
<param name='nri' doc='Mapping of Network Resource Indicators to this SGSN, for SGSN pooling' />
<param name='nsei' doc='Identify SGSN by NSEI' />
<param name='&lt;0-65535&gt;' doc='NSEI of the SGSN' />
</params>
</command>
<command id='logging filter bvc bvci &lt;0-65535&gt;'>
<params>
<param name='logging' doc='Configure logging' />
<param name='filter' doc='Filter log messages' />
<param name='bvc' doc='Filter based on BSSGP VC' />
<param name='bvci' doc='Identify BVC by BVCI' />
<param name='&lt;0-65535&gt;' doc='Numeric identifier' />
</params>
</command>
</node>
<node id='enable'>
<name>enable</name>
<command id='disable'>
<params>
<param name='disable' doc='Turn off privileged mode command' />
</params>
</command>
<command id='configure terminal'>
<params>
<param name='configure' doc='Configuration from vty interface' />
<param name='terminal' doc='Configuration terminal' />
</params>
</command>
<command id='copy running-config startup-config'>
<params>
<param name='copy' doc='Copy configuration' />
<param name='running-config' doc='Copy running config to... ' />
<param name='startup-config' doc='Copy running config to startup config (same as write file)' />
</params>
</command>
<command id='show startup-config'>
<params>
<param name='show' doc='Show running system information' />
<param name='startup-config' doc='Contentes of startup configuration' />
</params>
</command>
<command id='show version'>
<params>
<param name='show' doc='Show running system information' />
<param name='version' doc='Displays program version' />
</params>
</command>
<command id='show online-help'>
<params>
<param name='show' doc='Show running system information' />
<param name='online-help' doc='Online help' />
</params>
</command>
<command id='terminal length &lt;0-512&gt;'>
<params>
<param name='terminal' doc='Set terminal line parameters' />
<param name='length' doc='Set number of lines on a screen' />
<param name='&lt;0-512&gt;' doc='Number of lines on screen (0 for no pausing)' />
</params>
</command>
<command id='terminal no length'>
<params>
<param name='terminal' doc='Set terminal line parameters' />
<param name='no' doc='Negate a command or set its defaults' />
<param name='length' doc='Set number of lines on a screen' />
</params>
</command>
<command id='who'>
<params>
<param name='who' doc='Display who is on vty' />
</params>
</command>
<command id='show history'>
<params>
<param name='show' doc='Show running system information' />
<param name='history' doc='Display the session command history' />
</params>
</command>
<command id='terminal monitor'>
<params>
<param name='terminal' doc='Set terminal line parameters' />
<param name='monitor' doc='Copy debug output to the current terminal line' />
</params>
</command>
<command id='terminal no monitor'>
<params>
<param name='terminal' doc='Set terminal line parameters' />
<param name='no' doc='Negate a command or set its defaults' />
<param name='monitor' doc='Copy debug output to the current terminal line' />
</params>
</command>
<command id='logging enable'>
<params>
<param name='logging' doc='Configure logging' />
<param name='enable' doc='Enables logging to this vty' />
</params>
</command>
<command id='logging disable'>
<params>
<param name='logging' doc='Configure logging' />
<param name='disable' doc='Disables logging to this vty' />
</params>
</command>
<command id='logging filter all (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='filter' doc='Filter log messages' />
<param name='all' doc='Do you want to log all messages?' />
<param name='0' doc='Only print messages matched by other filters' />
<param name='1' doc='Bypass filter and print all messages' />
</params>
</command>
<command id='logging color (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='color' doc='Configure color-printing for log messages' />
<param name='0' doc='Don&apos;t use color for printing messages' />
<param name='1' doc='Use color for printing messages' />
</params>
</command>
<command id='logging timestamp (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='timestamp' doc='Configure log message timestamping' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with current timestamp' />
</params>
</command>
<command id='logging print extended-timestamp (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='extended-timestamp' doc='Configure log message timestamping' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
</params>
</command>
<command id='logging print category (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='category' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with category/subsystem name' />
</params>
</command>
<command id='logging print category-hex (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='category-hex' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with category/subsystem nr in hex (&apos;&lt;000b&gt;&apos;)' />
</params>
</command>
<command id='logging print level (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='level' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with the log level name' />
</params>
</command>
<command id='logging print file (0|1|basename) [last]'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='file' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with the source file and line' />
<param name='basename' doc='Prefix each log message with the source file&apos;s basename (strip leading paths) and line' />
<param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
</params>
</command>
<command id='logging set-log-mask MASK'>
<params>
<param name='logging' doc='Configure logging' />
<param name='set-log-mask' doc='Set the logmask of this logging target' />
<param name='MASK' doc='List of logging categories to log, e.g. &apos;abc:mno:xyz&apos;. Available log categories depend on the specific application, refer to the &apos;logging level&apos; command. Optionally add individual log levels like &apos;abc,1:mno,3:xyz,5&apos;, where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
</params>
</command>
<command id='logging level (|gprs|ns|obj|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro|lns|lbssgp) (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='gprs' doc='GPRS Packet Service' />
<param name='ns' doc='GPRS Network Service (NS)' />
<param name='obj' doc='GbProxy object allocation/release' />
<param name='lglobal' doc='Library-internal global log family' />
<param name='llapd' doc='LAPD in libosmogsm' />
<param name='linp' doc='A-bis Intput Subsystem' />
<param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
<param name='lmi' doc='A-bis Input Driver for Signalling' />
<param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
<param name='lsms' doc='Layer3 Short Message Service (SMS)' />
<param name='lctrl' doc='Control Interface' />
<param name='lgtp' doc='GPRS GTP library' />
<param name='lstats' doc='Statistics messages and logging' />
<param name='lgsup' doc='Generic Subscriber Update Protocol' />
<param name='loap' doc='Osmocom Authentication Protocol' />
<param name='lss7' doc='libosmo-sigtran Signalling System 7' />
<param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
<param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
<param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
<param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
<param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
<param name='lrspro' doc='Remote SIM protocol' />
<param name='lns' doc='GPRS NS layer' />
<param name='lbssgp' doc='GPRS BSSGP layer' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
</params>
</command>
<command id='logging level set-all (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
</params>
</command>
<command id='logging level force-all (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the &apos;no logging level force-all&apos; command. Note: any &apos;logging level &lt;category&gt; &lt;level&gt;&apos; commands will have no visible effect after this, until the forced level is released.' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
</params>
</command>
<command id='no logging level force-all'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='force-all' doc='Release any globally forced log level set with &apos;logging level force-all &lt;level&gt;&apos;' />
</params>
</command>
<command id='logp (|gprs|ns|obj|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro|lns|lbssgp) (debug|info|notice|error|fatal) .LOGMESSAGE'>
<params>
<param name='logp' doc='Print a message on all log outputs; useful for placing markers in test logs' />
<param name='gprs' doc='GPRS Packet Service' />
<param name='ns' doc='GPRS Network Service (NS)' />
<param name='obj' doc='GbProxy object allocation/release' />
<param name='lglobal' doc='Library-internal global log family' />
<param name='llapd' doc='LAPD in libosmogsm' />
<param name='linp' doc='A-bis Intput Subsystem' />
<param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
<param name='lmi' doc='A-bis Input Driver for Signalling' />
<param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
<param name='lsms' doc='Layer3 Short Message Service (SMS)' />
<param name='lctrl' doc='Control Interface' />
<param name='lgtp' doc='GPRS GTP library' />
<param name='lstats' doc='Statistics messages and logging' />
<param name='lgsup' doc='Generic Subscriber Update Protocol' />
<param name='loap' doc='Osmocom Authentication Protocol' />
<param name='lss7' doc='libosmo-sigtran Signalling System 7' />
<param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
<param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
<param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
<param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
<param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
<param name='lrspro' doc='Remote SIM protocol' />
<param name='lns' doc='GPRS NS layer' />
<param name='lbssgp' doc='GPRS BSSGP layer' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
<param name='.LOGMESSAGE' doc='Arbitrary message to log on given category and log level' />
</params>
</command>
<command id='show logging vty'>
<params>
<param name='show' doc='Show running system information' />
<param name='logging' doc='Show current logging configuration' />
<param name='vty' doc='Show current logging configuration for this vty' />
</params>
</command>
<command id='show alarms'>
<params>
<param name='show' doc='Show running system information' />
<param name='alarms' doc='Show current logging configuration' />
</params>
</command>
<command id='show talloc-context (application|all) (full|brief|DEPTH)'>
<params>
<param name='show' doc='Show running system information' />
<param name='talloc-context' doc='Show talloc memory hierarchy' />
<param name='application' doc='Application&apos;s context' />
<param name='all' doc='All contexts, if NULL-context tracking is enabled' />
<param name='full' doc='Display a full talloc memory hierarchy' />
<param name='brief' doc='Display a brief talloc memory hierarchy' />
<param name='DEPTH' doc='Specify required maximal depth value' />
</params>
</command>
<command id='show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS'>
<params>
<param name='show' doc='Show running system information' />
<param name='talloc-context' doc='Show talloc memory hierarchy' />
<param name='application' doc='Application&apos;s context' />
<param name='all' doc='All contexts, if NULL-context tracking is enabled' />
<param name='full' doc='Display a full talloc memory hierarchy' />
<param name='brief' doc='Display a brief talloc memory hierarchy' />
<param name='DEPTH' doc='Specify required maximal depth value' />
<param name='tree' doc='Display only a specific memory chunk' />
<param name='ADDRESS' doc='Chunk address (e.g. 0xdeadbeef)' />
</params>
</command>
<command id='show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP'>
<params>
<param name='show' doc='Show running system information' />
<param name='talloc-context' doc='Show talloc memory hierarchy' />
<param name='application' doc='Application&apos;s context' />
<param name='all' doc='All contexts, if NULL-context tracking is enabled' />
<param name='full' doc='Display a full talloc memory hierarchy' />
<param name='brief' doc='Display a brief talloc memory hierarchy' />
<param name='DEPTH' doc='Specify required maximal depth value' />
<param name='filter' doc='Filter chunks using regular expression' />
<param name='REGEXP' doc='Regular expression' />
</params>
</command>
<command id='show stats'>
<params>
<param name='show' doc='Show running system information' />
<param name='stats' doc='Show statistical values' />
</params>
</command>
<command id='show stats level (global|peer|subscriber)'>
<params>
<param name='show' doc='Show running system information' />
<param name='stats' doc='Show statistical values' />
<param name='level' doc='Set the maximum group level' />
<param name='global' doc='Show global groups only' />
<param name='peer' doc='Show global and network peer related groups' />
<param name='subscriber' doc='Show global, peer, and subscriber groups' />
</params>
</command>
<command id='show asciidoc counters'>
<params>
<param name='show' doc='Show running system information' />
<param name='asciidoc' doc='Asciidoc generation' />
<param name='counters' doc='Generate table of all registered counters' />
</params>
</command>
<command id='show rate-counters'>
<params>
<param name='show' doc='Show running system information' />
<param name='rate-counters' doc='Show all rate counters' />
</params>
</command>
<command id='stats report'>
<params>
<param name='stats' doc='Stats related commands' />
<param name='report' doc='Manurally trigger reporting of stats' />
</params>
</command>
<command id='stats reset'>
<params>
<param name='stats' doc='Stats related commands' />
<param name='reset' doc='Reset all stats' />
</params>
</command>
<command id='show fsm NAME'>
<params>
<param name='show' doc='Show running system information' />
<param name='fsm' doc='Show information about finite state machines' />
<param name='NAME' doc='Display information about a single named finite state machine' />
</params>
</command>
<command id='show fsm all'>
<params>
<param name='show' doc='Show running system information' />
<param name='fsm' doc='Show information about finite state machines' />
<param name='all' doc='Display a list of all registered finite state machines' />
</params>
</command>
<command id='show fsm-instances NAME'>
<params>
<param name='show' doc='Show running system information' />
<param name='fsm-instances' doc='Show information about finite state machine instances' />
<param name='NAME' doc='Display a list of all FSM instances of the named finite state machine' />
</params>
</command>
<command id='show fsm-instances all'>
<params>
<param name='show' doc='Show running system information' />
<param name='fsm-instances' doc='Show information about finite state machine instances' />
<param name='all' doc='Display a list of all FSM instances of all finite state machine' />
</params>
</command>
<command id='show gbproxy bvc (bss|sgsn) [stats]'>
<params>
<param name='show' doc='Show running system information' />
<param name='gbproxy' doc='Display information about the Gb proxy' />
<param name='bvc' doc='Show BSSGP Virtual Connections' />
<param name='bss' doc='Display BSS-side BVCs' />
<param name='sgsn' doc='Display SGSN-side BVCs' />
<param name='[stats]' doc='Show statistics' />
</params>
</command>
<command id='show gbproxy cell [stats]'>
<params>
<param name='show' doc='Show running system information' />
<param name='gbproxy' doc='Display information about the Gb proxy' />
<param name='cell' doc='Show GPRS Cell Information' />
<param name='[stats]' doc='Show statistics' />
</params>
</command>
<command id='show gbproxy links'>
<params>
<param name='show' doc='Show running system information' />
<param name='gbproxy' doc='Display information about the Gb proxy' />
<param name='links' doc='Show logical links' />
</params>
</command>
<command id='show gbproxy tlli-cache'>
<params>
<param name='show' doc='Show running system information' />
<param name='gbproxy' doc='Display information about the Gb proxy' />
<param name='tlli-cache' doc='Show TLLI cache entries' />
</params>
</command>
<command id='show gbproxy imsi-cache'>
<params>
<param name='show' doc='Show running system information' />
<param name='gbproxy' doc='Display information about the Gb proxy' />
<param name='imsi-cache' doc='Show IMSI cache entries' />
</params>
</command>
<command id='show nri all'>
<params>
<param name='show' doc='Show running system information' />
<param name='nri' doc='Mapping of Network Resource Indicators to this SGSN, for SGSN pooling' />
<param name='all' doc='Show all SGSNs' />
</params>
</command>
<command id='show nri nsei &lt;0-65535&gt;'>
<params>
<param name='show' doc='Show running system information' />
<param name='nri' doc='Mapping of Network Resource Indicators to this SGSN, for SGSN pooling' />
<param name='nsei' doc='Identify SGSN by NSEI' />
<param name='&lt;0-65535&gt;' doc='NSEI of the SGSN' />
</params>
</command>
<command id='logging filter bvc bvci &lt;0-65535&gt;'>
<params>
<param name='logging' doc='Configure logging' />
<param name='filter' doc='Filter log messages' />
<param name='bvc' doc='Filter based on BSSGP VC' />
<param name='bvci' doc='Identify BVC by BVCI' />
<param name='&lt;0-65535&gt;' doc='Numeric identifier' />
</params>
</command>
<command id='delete-gbproxy-peer &lt;0-65534&gt; bvci &lt;2-65534&gt;'>
<params>
<param name='delete-gbproxy-peer' doc='Delete a GBProxy bvc by NSEI and optionally BVCI' />
<param name='&lt;0-65534&gt;' doc='NSEI number' />
<param name='bvci' doc='Only delete bvc with a matching BVCI' />
<param name='&lt;2-65534&gt;' doc='BVCI number' />
</params>
</command>
<command id='delete-gbproxy-peer &lt;0-65534&gt; (only-bvc|only-nsvc|all) [dry-run]'>
<params>
<param name='delete-gbproxy-peer' doc='Delete a GBProxy bvc by NSEI and optionally BVCI' />
<param name='&lt;0-65534&gt;' doc='NSEI number' />
<param name='only-bvc' doc='Only delete BSSGP connections (BVC)' />
<param name='only-nsvc' doc='Only delete dynamic NS connections (NS-VC)' />
<param name='all' doc='Delete BVC and dynamic NS connections' />
<param name='[dry-run]' doc='Show what would be deleted instead of actually deleting' />
</params>
</command>
</node>
<node id='config'>
<name>config</name>
<command id='hostname WORD'>
<params>
<param name='hostname' doc='Set system&apos;s network name' />
<param name='WORD' doc='This system&apos;s network name' />
</params>
</command>
<command id='no hostname [HOSTNAME]'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='hostname' doc='Reset system&apos;s network name' />
<param name='[HOSTNAME]' doc='Host name of this router' />
</params>
</command>
<command id='password (8|) WORD'>
<params>
<param name='password' doc='Assign the terminal connection password' />
<param name='8' doc='Specifies a HIDDEN password will follow' />
<param name='' doc='dummy string ' />
<param name='WORD' doc='The HIDDEN line password string' />
</params>
</command>
<command id='password LINE'>
<params>
<param name='password' doc='Assign the terminal connection password' />
<param name='LINE' doc='The UNENCRYPTED (cleartext) line password' />
</params>
</command>
<command id='enable password (8|) WORD'>
<params>
<param name='enable' doc='Modify enable password parameters' />
<param name='password' doc='Assign the privileged level password' />
<param name='8' doc='Specifies a HIDDEN password will follow' />
<param name='' doc='dummy string ' />
<param name='WORD' doc='The HIDDEN &apos;enable&apos; password string' />
</params>
</command>
<command id='enable password LINE'>
<params>
<param name='enable' doc='Modify enable password parameters' />
<param name='password' doc='Assign the privileged level password' />
<param name='LINE' doc='The UNENCRYPTED (cleartext) &apos;enable&apos; password' />
</params>
</command>
<command id='no enable password'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='enable' doc='Modify enable password parameters' />
<param name='password' doc='Assign the privileged level password' />
</params>
</command>
<command id='banner motd default'>
<params>
<param name='banner' doc='Set banner string' />
<param name='motd' doc='Strings for motd' />
<param name='default' doc='Default string' />
</params>
</command>
<command id='banner motd file [FILE]'>
<params>
<param name='banner' doc='Set banner' />
<param name='motd' doc='Banner for motd' />
<param name='file' doc='Banner from a file' />
<param name='[FILE]' doc='Filename' />
</params>
</command>
<command id='no banner motd'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='banner' doc='Set banner string' />
<param name='motd' doc='Strings for motd' />
</params>
</command>
<command id='service terminal-length &lt;0-512&gt;'>
<params>
<param name='service' doc='Set up miscellaneous service' />
<param name='terminal-length' doc='System wide terminal length configuration' />
<param name='&lt;0-512&gt;' doc='Number of lines of VTY (0 means no line control)' />
</params>
</command>
<command id='no service terminal-length [&lt;0-512&gt;]'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='service' doc='Set up miscellaneous service' />
<param name='terminal-length' doc='System wide terminal length configuration' />
<param name='[&lt;0-512&gt;]' doc='Number of lines of VTY (0 means no line control)' />
</params>
</command>
<command id='line vty'>
<params>
<param name='line' doc='Configure a terminal line' />
<param name='vty' doc='Virtual terminal' />
</params>
</command>
<command id='service advanced-vty'>
<params>
<param name='service' doc='Set up miscellaneous service' />
<param name='advanced-vty' doc='Enable advanced mode vty interface' />
</params>
</command>
<command id='no service advanced-vty'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='service' doc='Set up miscellaneous service' />
<param name='advanced-vty' doc='Enable advanced mode vty interface' />
</params>
</command>
<command id='show history'>
<params>
<param name='show' doc='Show running system information' />
<param name='history' doc='Display the session command history' />
</params>
</command>
<command id='log stderr'>
<params>
<param name='log' doc='Configure logging sub-system' />
<param name='stderr' doc='Logging via STDERR of the process' />
</params>
</command>
<command id='no log stderr'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='log' doc='Configure logging sub-system' />
<param name='stderr' doc='Logging via STDERR of the process' />
</params>
</command>
<command id='log file .FILENAME'>
<params>
<param name='log' doc='Configure logging sub-system' />
<param name='file' doc='Logging to text file' />
<param name='.FILENAME' doc='Filename' />
</params>
</command>
<command id='no log file .FILENAME'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='log' doc='Configure logging sub-system' />
<param name='file' doc='Logging to text file' />
<param name='.FILENAME' doc='Filename' />
</params>
</command>
<command id='log alarms &lt;2-32700&gt;'>
<params>
<param name='log' doc='Configure logging sub-system' />
<param name='alarms' doc='Logging alarms to osmo_strrb' />
<param name='&lt;2-32700&gt;' doc='Maximum number of messages to log' />
</params>
</command>
<command id='no log alarms'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='log' doc='Configure logging sub-system' />
<param name='alarms' doc='Logging alarms to osmo_strrb' />
</params>
</command>
<command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'>
<params>
<param name='log' doc='Configure logging sub-system' />
<param name='syslog' doc='Logging via syslog' />
<param name='authpriv' doc='Security/authorization messages facility' />
<param name='cron' doc='Clock daemon (cron/at) facility' />
<param name='daemon' doc='General system daemon facility' />
<param name='ftp' doc='Ftp daemon facility' />
<param name='lpr' doc='Line printer facility' />
<param name='mail' doc='Mail facility' />
<param name='news' doc='News facility' />
<param name='user' doc='Generic facility' />
<param name='uucp' doc='UUCP facility' />
</params>
</command>
<command id='log syslog local &lt;0-7&gt;'>
<params>
<param name='log' doc='Configure logging sub-system' />
<param name='syslog' doc='Logging via syslog' />
<param name='local' doc='Syslog LOCAL facility' />
<param name='&lt;0-7&gt;' doc='Local facility number' />
</params>
</command>
<command id='no log syslog'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='log' doc='Configure logging sub-system' />
<param name='syslog' doc='Logging via syslog' />
</params>
</command>
<command id='log systemd-journal [raw]'>
<params>
<param name='log' doc='Configure logging sub-system' />
<param name='systemd-journal' doc='Logging to systemd-journal' />
<param name='[raw]' doc='Offload rendering of the meta information (location, category) to systemd' />
</params>
</command>
<command id='no log systemd-journal'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='log' doc='Configure logging sub-system' />
<param name='systemd-journal' doc='Logging to systemd-journal' />
</params>
</command>
<command id='log gsmtap [HOSTNAME]'>
<params>
<param name='log' doc='Configure logging sub-system' />
<param name='gsmtap' doc='Logging via GSMTAP' />
<param name='[HOSTNAME]' doc='Host name to send the GSMTAP logging to (UDP port 4729)' />
</params>
</command>
<command id='stats reporter statsd'>
<params>
<param name='stats' doc='Configure stats sub-system' />
<param name='reporter' doc='Configure a stats reporter' />
<param name='statsd' doc='Report to a STATSD server' />
</params>
</command>
<command id='no stats reporter statsd'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='stats' doc='Configure stats sub-system' />
<param name='reporter' doc='Configure a stats reporter' />
<param name='statsd' doc='Report to a STATSD server' />
</params>
</command>
<command id='stats reporter log'>
<params>
<param name='stats' doc='Configure stats sub-system' />
<param name='reporter' doc='Configure a stats reporter' />
<param name='log' doc='Report to the logger' />
</params>
</command>
<command id='no stats reporter log'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='stats' doc='Configure stats sub-system' />
<param name='reporter' doc='Configure a stats reporter' />
<param name='log' doc='Report to the logger' />
</params>
</command>
<command id='stats interval &lt;0-65535&gt;'>
<params>
<param name='stats' doc='Configure stats sub-system' />
<param name='interval' doc='Set the reporting interval' />
<param name='&lt;0-65535&gt;' doc='Interval in seconds (0 disables the reporting interval)' />
</params>
</command>
<command id='gbproxy'>
<params>
<param name='gbproxy' doc='Configure the Gb proxy' />
</params>
</command>
<command id='sgsn nsei &lt;0-65534&gt;'>
<params>
<param name='sgsn' doc='Configure the SGSN' />
<param name='nsei' doc='NSEI to be used in the connection with the SGSN' />
<param name='&lt;0-65534&gt;' doc='The NSEI' />
</params>
</command>
</node>
<node id='config-log'>
<name>config-log</name>
<command id='logging filter all (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='filter' doc='Filter log messages' />
<param name='all' doc='Do you want to log all messages?' />
<param name='0' doc='Only print messages matched by other filters' />
<param name='1' doc='Bypass filter and print all messages' />
</params>
</command>
<command id='logging color (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='color' doc='Configure color-printing for log messages' />
<param name='0' doc='Don&apos;t use color for printing messages' />
<param name='1' doc='Use color for printing messages' />
</params>
</command>
<command id='logging timestamp (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='timestamp' doc='Configure log message timestamping' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with current timestamp' />
</params>
</command>
<command id='logging print extended-timestamp (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='extended-timestamp' doc='Configure log message timestamping' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
</params>
</command>
<command id='logging print category (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='category' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with category/subsystem name' />
</params>
</command>
<command id='logging print category-hex (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='category-hex' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with category/subsystem nr in hex (&apos;&lt;000b&gt;&apos;)' />
</params>
</command>
<command id='logging print level (0|1)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='level' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with the log level name' />
</params>
</command>
<command id='logging print file (0|1|basename) [last]'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
<param name='file' doc='Configure log message' />
<param name='0' doc='Don&apos;t prefix each log message' />
<param name='1' doc='Prefix each log message with the source file and line' />
<param name='basename' doc='Prefix each log message with the source file&apos;s basename (strip leading paths) and line' />
<param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
</params>
</command>
<command id='logging level (|gprs|ns|obj|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro|lns|lbssgp) (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='gprs' doc='GPRS Packet Service' />
<param name='ns' doc='GPRS Network Service (NS)' />
<param name='obj' doc='GbProxy object allocation/release' />
<param name='lglobal' doc='Library-internal global log family' />
<param name='llapd' doc='LAPD in libosmogsm' />
<param name='linp' doc='A-bis Intput Subsystem' />
<param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
<param name='lmi' doc='A-bis Input Driver for Signalling' />
<param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
<param name='lsms' doc='Layer3 Short Message Service (SMS)' />
<param name='lctrl' doc='Control Interface' />
<param name='lgtp' doc='GPRS GTP library' />
<param name='lstats' doc='Statistics messages and logging' />
<param name='lgsup' doc='Generic Subscriber Update Protocol' />
<param name='loap' doc='Osmocom Authentication Protocol' />
<param name='lss7' doc='libosmo-sigtran Signalling System 7' />
<param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
<param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
<param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
<param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
<param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
<param name='lrspro' doc='Remote SIM protocol' />
<param name='lns' doc='GPRS NS layer' />
<param name='lbssgp' doc='GPRS BSSGP layer' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
</params>
</command>
<command id='logging level set-all (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
</params>
</command>
<command id='logging level force-all (debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the &apos;no logging level force-all&apos; command. Note: any &apos;logging level &lt;category&gt; &lt;level&gt;&apos; commands will have no visible effect after this, until the forced level is released.' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
<param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
</params>
</command>
<command id='no logging level force-all'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
<param name='force-all' doc='Release any globally forced log level set with &apos;logging level force-all &lt;level&gt;&apos;' />
</params>
</command>
</node>
<node id='config-stats'>
<name>config-stats</name>
<command id='local-ip ADDR'>
<params>
<param name='local-ip' doc='Set the IP address to which we bind locally' />
<param name='ADDR' doc='IP Address' />
</params>
</command>
<command id='no local-ip'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='local-ip' doc='Set the IP address to which we bind locally' />
</params>
</command>
<command id='remote-ip ADDR'>
<params>
<param name='remote-ip' doc='Set the remote IP address to which we connect' />
<param name='ADDR' doc='IP Address' />
</params>
</command>
<command id='remote-port &lt;1-65535&gt;'>
<params>
<param name='remote-port' doc='Set the remote port to which we connect' />
<param name='&lt;1-65535&gt;' doc='Remote port number' />
</params>
</command>
<command id='mtu &lt;100-65535&gt;'>
<params>
<param name='mtu' doc='Set the maximum packet size' />
<param name='&lt;100-65535&gt;' doc='Size in byte' />
</params>
</command>
<command id='no mtu'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='mtu' doc='Set the maximum packet size' />
</params>
</command>
<command id='prefix PREFIX'>
<params>
<param name='prefix' doc='Set the item name prefix' />
<param name='PREFIX' doc='The prefix string' />
</params>
</command>
<command id='no prefix'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='prefix' doc='Set the item name prefix' />
</params>
</command>
<command id='level (global|peer|subscriber)'>
<params>
<param name='level' doc='Set the maximum group level' />
<param name='global' doc='Report global groups only' />
<param name='peer' doc='Report global and network peer related groups' />
<param name='subscriber' doc='Report global, peer, and subscriber groups' />
</params>
</command>
<command id='enable'>
<params>
<param name='enable' doc='Enable the reporter' />
</params>
</command>
<command id='disable'>
<params>
<param name='disable' doc='Disable the reporter' />
</params>
</command>
<command id='flush-period &lt;0-65535&gt;'>
<params>
<param name='flush-period' doc='Configure stats sub-system' />
<param name='&lt;0-65535&gt;' doc='Send all stats even if they have not changed (i.e. force the flush)every N-th reporting interval. Set to 0 to disable regular flush (default).' />
</params>
</command>
</node>
<node id='config-line'>
<name>config-line</name>
<command id='login'>
<params>
<param name='login' doc='Enable password checking' />
</params>
</command>
<command id='no login'>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='login' doc='Enable password checking' />
</params>
</command>
<command id='bind A.B.C.D [&lt;0-65535&gt;]'>
<params>
<param name='bind' doc='Accept VTY telnet connections on local interface' />
<param name='A.B.C.D' doc='Local interface IP address (default: 127.0.0.1)' />
<param name='[&lt;0-65535&gt;]' doc='Local TCP port number' />
</params>
</command>
</node>
<node id='config-gbproxy'>
<name>config-gbproxy</name>
<command id='pool bvc-flow-control-ratio &lt;1-100&gt;'>
<params>
<param name='pool' doc='SGSN Pool related configuration' />
<param name='bvc-flow-control-ratio' doc='Ratio of BSS-advertised bucket size + leak rate advertised to each SGSN' />
<param name='&lt;1-100&gt;' doc='Ratio of BSS-advertised bucket size + leak rate advertised to each SGSN (Percent)' />
</params>
</command>
<command id='nri bitlen &lt;0-15&gt;'>
<attributes scope='global'>
<attribute doc='This command applies immediately' flag='!' />
</attributes>
<params>
<param name='nri' doc='Mapping of Network Resource Indicators to this SGSN, for SGSN pooling' />
<param name='bitlen' doc='Set number of bits that an NRI has, to extract from TMSI identities (always starting just after the TMSI&apos;s most significant octet).' />
<param name='&lt;0-15&gt;' doc='bit count (0 disables) pooling)' />
</params>
</command>
<command id='nri null add &lt;0-32767&gt; [&lt;0-32767&gt;]'>
<attributes scope='global'>
<attribute doc='This command applies immediately' flag='!' />
</attributes>
<params>
<param name='nri' doc='Mapping of Network Resource Indicators to this SGSN, for SGSN pooling' />
<param name='null' doc='Define NULL-NRI values that cause re-assignment of an MS to a different SGSN, for SGSN pooling.' />
<param name='add' doc='Add NULL-NRI value (or range)' />
<param name='&lt;0-32767&gt;' doc='First value of the NRI value range, should not surpass the configured &apos;nri bitlen&apos;.' />
<param name='[&lt;0-32767&gt;]' doc='Last value of the NRI value range, should not surpass the configured &apos;nri bitlen&apos; and be larger than the first value; if omitted, apply only the first value.' />
</params>
</command>
<command id='nri null del &lt;0-32767&gt; [&lt;0-32767&gt;]'>
<attributes scope='global'>
<attribute doc='This command applies immediately' flag='!' />
</attributes>
<params>
<param name='nri' doc='Mapping of Network Resource Indicators to this SGSN, for SGSN pooling' />
<param name='null' doc='Define NULL-NRI values that cause re-assignment of an MS to a different SGSN, for SGSN pooling.' />
<param name='del' doc='Remove NRI value or range from the NRI mapping for this MSC' />
<param name='&lt;0-32767&gt;' doc='First value of the NRI value range, should not surpass the configured &apos;nri bitlen&apos;.' />
<param name='[&lt;0-32767&gt;]' doc='Last value of the NRI value range, should not surpass the configured &apos;nri bitlen&apos; and be larger than the first value; if omitted, apply only the first value.' />
</params>
</command>
</node>
<node id='config-sgsn'>
<name>config-sgsn</name>
<command id='name NAME'>
<params>
<param name='name' doc='Configure the SGSN' />
<param name='NAME' doc='Name the SGSN' />
</params>
</command>
<command id='allow-attach'>
<attributes scope='global'>
<attribute doc='This command applies immediately' flag='!' />
</attributes>
<params>
<param name='allow-attach' doc='Allow this SGSN to attach new subscribers (default).' />
</params>
</command>
<command id='no allow-attach'>
<attributes scope='global'>
<attribute doc='This command applies immediately' flag='!' />
</attributes>
<params>
<param name='no' doc='Negate a command or set its defaults' />
<param name='allow-attach' doc='Do not assign new subscribers to this MSC. Useful if an MSC in an MSC pool is configured to off-load subscribers. The MSC will still be operational for already IMSI-Attached subscribers, but the NAS node selection function will skip this MSC for new subscribers' />
</params>
</command>
<command id='nri add &lt;0-32767&gt; [&lt;0-32767&gt;]'>
<attributes scope='global'>
<attribute doc='This command applies immediately' flag='!' />
</attributes>
<params>
<param name='nri' doc='Mapping of Network Resource Indicators to this SGSN, for SGSN pooling' />
<param name='add' doc='Add NRI value or range to the NRI mapping for this MSC' />
<param name='&lt;0-32767&gt;' doc='First value of the NRI value range, should not surpass the configured &apos;nri bitlen&apos;.' />
<param name='[&lt;0-32767&gt;]' doc='Last value of the NRI value range, should not surpass the configured &apos;nri bitlen&apos; and be larger than the first value; if omitted, apply only the first value.' />
</params>
</command>
<command id='nri del &lt;0-32767&gt; [&lt;0-32767&gt;]'>
<attributes scope='global'>
<attribute doc='This command applies immediately' flag='!' />
</attributes>
<params>
<param name='nri' doc='Mapping of Network Resource Indicators to this SGSN, for SGSN pooling' />
<param name='del' doc='Remove NRI value or range from the NRI mapping for this MSC' />
<param name='&lt;0-32767&gt;' doc='First value of the NRI value range, should not surpass the configured &apos;nri bitlen&apos;.' />
<param name='[&lt;0-32767&gt;]' doc='Last value of the NRI value range, should not surpass the configured &apos;nri bitlen&apos; and be larger than the first value; if omitted, apply only the first value.' />
</params>
</command>
</node>
</vtydoc>
View Git Blame Copy Permalink