osmo-gbproxy (1:0.2.0) unstable; urgency=medium [ Pau Espin Pedrol ] * Support setting rt-prio and cpu-affinity mask through VTY * Avoid sending tx_status upon rx of RIM messages * Use new stat item/ctr getter APIs [ Daniel Willmann ] * gbproxy_main: Fix naming bsc_hack/nsip_proxy -> (osmo-)gbproxy * manual: Update manuals, include sgsn pooling and NS variants * manuals: Regenerate counters/VTY through docker * Remove some outdated TODO/comments * gb_proxy.h: Use pragma once instead of ifndef * Update the max_sdu_len from NS * Handle GPRS_NS2_AFF_CAUSE_FAILURE * Remove osmo-sgsn relics * gbproxy: Don't free NSE/BVC0 if SGSN NSE goes down * gbproxy_main: Add ctrl vty commands * gb_proxy: Ensure cell info is up to date when receiving PTP-BVC reset * gbproxy_main: Process options after all initialization is done * examples/manuals: Improve/update ns-related documentation * Don't route messages to an SGSN if it is down * manual: Update counters, add proper chapter for counters * gbproxy_vty: Remove redundant command "show gbproxy links" * manual: Add section describing show gbproxy command usage * manual: Add chapter describing osmo counters in general * gbproxy: Add usage flag to the imsi_cache * gbproxy: Forward MS_REGISTR_ENQ/_RESP correctly * gbproxy_peer: Set rate_ctr name for gbproxy_peer stats * gbproxy_peer: Free a cell as soon as no BSS BVC uses it * gbproxy_ctrl: Fix crash in nsvc-state ctrl command * gbproxy_ctrl: Ignore SIG-BVCI in ctrl commands * gbproxy: Remove SGSN-side BVC after sending BVC-BLOCK * gbproxy: Avoid sending STATUS on unexpected BLOCK_ACK * gbproxy: Fix stats when no BVC could be found * gbproxy: Use designated initializers for global_ctr_description * gbproxy: Improve log message when no bvc is found (include bvci) * gbproxy: Route BSSGP STATUS with PDU_IN_ERROR containing a TLLI * gpproxy: Route BSSGP STATUS with PDU_IN_ERROR containing a TMSI * gbproxy: Add comment, improve log message in gbproxy_tlli_from_status_pdu * gbproxy: Improve STATUS handling from SGSN * gbproxy: Route DL STATUS with BVCI on SIG-BVC * gbproxy: Add comment, remove unused param in gbproxy_tlli_from_status_pdu * gbproxy: Route STATUS in PtP-BVC by TLLI/TMSI as well * gbproxy: Move BSSGP decoding into its own function and use it * gbproxy: Increase correct counter when BSSGP decode from SGSN fails * gbproxy: Only use one struct tlv_parsed for gbproxy_decode_bssgp * gbproxy: Remove duplicate struct gprs_ra_id handling [ Harald Welte ] * vty: Print CellId along with RA-ID [ Oliver Smith ] * doc: include gb-ns2.adoc, not gb-variants.adoc * gitignore: add gbproxy_vty_reference.xml * examples/osmo-gbproxy.cfg: fix osmo-sgsn conflict * debian/control: remove dh-systemd build-depend * Revert "Turn some compiler warnings into errors" -- Pau Espin Pedrol Tue, 16 Nov 2021 18:03:02 +0100 osmo-gbproxy (1:0.1.0) unstable; urgency=medium [ Philipp Maier ] * gb_proxy_ctrl: use mcc-mnc-lac-rac notation instead mcc,mnc,lac,rac * gb_proxy: simplify raid data storage * gb_proxy_peer: Remove unused function gbproxy_cell_by_bvci_or_new * gb_proxy_peer: Require ra_id and cid in gbproxy_cell_alloc * gb_proxy: extend TLV parser * gb_proxy: add support for relaying BSSGP RIM messages * gb_proxy: fix wrong usage of bssgp_rim_ri_name() [ Daniel Willmann ] * gb_proxy_peer: Add Function to get gbproxy cell by cell id * gbproxy_vty: Fix NRI VTY help MSC->SGSN * gbproxy_vty: Fix NRI overlap behaviour to match osmo-bsc * Various comment/whitespace changes * Remove trailing whitespace * gbproxy: Use bssgp2_nsi_tx_ptp in gbprox_relay2nse * Remove unused log categories * Move vty node into gbproxy_vty.c * Add SDU length for an NSE (== BSSGP PDU size) * gbproxy: Use bssgp2_enc_status when sending STATUS [ Pau Espin Pedrol ] * Drop c-ares references * debian/copyright: Drop osmo-sgsn.git leftover files from list * gitignore: Ignore autofoo files *~ [ Oliver Smith ] * d/changelog: set epoch=1 -- Pau Espin Pedrol Wed, 24 Feb 2021 16:54:13 +0100 osmo-gbproxy (1:0.0.1) unstable; urgency=medium [ Harald Welte ] * Further clean-up in osmo-sgsn -> osmo-gbproxy migration * Update README to cover osmo-gbproxy and not osmo-sgsn [ Oliver Smith ] * contrib/jenkins.sh: adjust to osmo-gbproxy split * debian: fix installing pdfs for -doc package * contrib/osmo-gbproxy.spec.in: fix config paths -- Oliver Smith Fri, 05 Feb 2021 11:42:48 +0100 osmo-gbproxy (1:0.0.0) unstable; urgency=medium [ Neels Hofmeyr ] * manual: explain IuPS, add SCCP/M3UA section from common chapters [ Eric ] * tests: dlopen does not imply availability of dlsym.. * configure.ac: fix libtool issue with clang and sanitizer [ Harald Welte ] * gtphub_test: Fix compilation with gcc-10 [ Oliver Smith ] * contrib: import RPM spec * contrib: integrate RPM spec * Makefile.am: EXTRA_DIST: debian, contrib/*.spec.in [ Neels Hofmeyr ] * gbproxy_test.c: fix mobile identity test data * use new osmo_mobile_identity API everywhere [ Harald Welte ] * *.spec.in: Use %config(noreplace) to retain current config file [ Alexander Couzens ] * gtphub: rename sgsn's oww osmo_sockaddr into sgsn_sockaddr [ Vadim Yanitskiy ] * debian/control: change maintainer to the Osmocom team / mailing list [ Pau Espin Pedrol ] * configure.ac: Fix trailing whitespace * doc: Update VTY reference xml file * Support setting rt-prio and cpu-affinity mask through VTY [ Daniel Willmann ] * gbproxy-usermanual: Explain BSSGP/BVC handling [ Alexander Couzens ] * gtphub_test: fix compilation error on gcc 10.2.0 [ Pau Espin Pedrol ] * contrib/jenkins: Enable parallel make in make distcheck [ Keith ] * VTY: Add gtp state-dir command [ Alexander Couzens ] * Port gbproxy to NS2 [ Daniel Willmann ] * gbproxy: Whitespace fixes * gbproxy: Add todo for BVC RESET logic * gbproxy: Get the peer if paging by BVCI on SIG_BVC * Let libosmocore handle VTY parent node tracking * osmo-gbproxy: Free msgb in ns2 prim callback * configure.ac: Require python3 for ext_tests * osmo-gbproxy: Implement nsvc-state ctrl command [ Harald Welte ] * gbproxy: Properly implement paging to LAC/RAC * gbproxy: Implement paging to entire BSS area [ Pau Espin Pedrol ] * gbproxy: generate coredump and exit upon SIGABRT received [ Harald Welte ] * gbproxy: Pass TLLI as LSP towards NS to facilitate load sharing * gb_proxy_peer: Add some FIXMEs regarding invalid assumptions [ Daniel Willmann ] * gbproxy: Remove test testing NSVCI change * gbproxy: Add NSE peer that can have multiple gbproxy_peers * gbproxy: Ensure BVC0 is reset before handling PtP BVCs * gbproxy: Only send paging to each matching NSE once * gbproxy: Separate function to move gbproxy_peer to different nse [ Harald Welte ] * gb_proxy: More precise + readable log messages [ Daniel Willmann ] * gbproxy: Add logging macros for NSE and BVC * gbproxy: Use LOG macros for NSE/BVC * gbproxy: Change generic LOG messages so BVCI/NSEI fmt is consistent * gbproxy: Add todos encountered while going through the code [ Harald Welte ] * gb_proxy: Broadcast SGSN-INVOKE-TRACE and OVERLOAD * gbproxy: Move BSS-side BVC-RESET processing to its own function * gb_proxy: Slightly restructure processing of BSS-originated BVC-RESET * gbproxy: Cosmetics: use longer lines [ Daniel Willmann ] * gbproxy: Add BVC log filters * gbproxy: Add newline to log message * gbproxy: Allow gbproxy_nse_free(NULL) * gbproxy: Delete gbproxy_nse in delete-gbproxy-peer VTY command [ Harald Welte ] * gbproxy: Send BVC-STATUS if BSS sends us BVC-RESET without mandatory IEs * gb_proxy: Use TLVP_PRES_LEN instead of TLVP_PRESENT * gb_proxy: Rename gbproxy_peer to gbproxy_bvc * gbproxy: Rename gbproxy_cfg.nses to gbproxy_cfg.bss_nses * gbproxy: convert bss_nses from llist_head to hashtable * gbproxy: convert nse->bvcs from llist_head to hashtable * gbproxy: Remove patching, TLLI-tracking and SGSN2 support * gb_proxy: cosmetic: Use function rather than open-coding is_sgsn * gbproxy: Delete gbproxy_test * gb_proxy: Introduce more validation / constraint checks * gbproxy: use gbprox_relay2peer() whenever possible * gb_proxy: Use osmo_tlv_prot_parse() to validate mandatory IEs * gbproxy: Log FSM timeouts * migrate to DLBSSGP as log sub-system for BSSGP * gbproxy major rewrite for SGSN pool support * gbproxy: Use "(nsei << 16) | bvci" as rate_ctr_group index * gbproxy: Introduce new DOBJ log category; log object allocation/release * gbproxy: Don't create an extra msgb copy for SGSN DL SIG * gbproxy: Implement handling of BVC Flow Control [ Daniel Willmann ] * gbproxy: Fix bvci check in gbprox_rx_ptp_from_* [ Harald Welte ] * gbproxy: Copy RA-ID from BSS side BVC to CELL and SGSN-side BVC * gbproxy: (Re)allocate SGSN-side PTP BVC even if CELL already exists * gbproxy: Fix segfault when receiving PAGING for unknown destination * gbproxy: Add FSM related VTY commands * gbproxy: Implement scaling of BVC flow control in SGSN pool * gbproxy: Improve VTY state introspection * gbproxy: rename vty command "show gbproxy ..." to "show gbproxy bvc ..." [ Daniel Willmann ] * osmo-gbproxy: Initialize all hash_maps * gbproxy: Fix confusing log message in gbprox_relay2nse [ Harald Welte ] * gbproxy: Add "show gbproxy cell ..." VTY command [ Daniel Willmann ] * gbproxy: Add SGSN NRI configuration * gbproxy: Add SGSN pooling support * gbproxy: Add comments to sgsn functions [ Harald Welte ] * gbproxy: Fix build on Deiban 8 [ Alexander Couzens ] * sgsn: Use the new NS2 api * gbproxy: use ns2 vty2 [ Daniel Willmann ] * gbproxy: Add config option to name an SGSN * gbproxy: Add VTY command to override the node selection function [ Vadim Yanitskiy ] * gb_proxy_peer: sgsn can never be NULL in gbproxy_sgsn_by_nri() * gb_proxy_peer: fix NULL pointer dereference in gbproxy_sgsn_alloc() [ Daniel Willmann ] * Fix gbproxy_sgsn_by_tlli wraparound [ Alexander Couzens ] * configure.ac: define a c standard instead of using the compilers default [ Daniel Willmann ] * gbproxy: Implement TLLI cache and use it for SUSPEND/RESUME * gbproxy: Increase TLLI cache timeout to 10s [ Oliver Smith ] * contrib/jenkins: don't build osmo-gsm-manuals [ Daniel Willmann ] * gbproxy: Implement IMSI cache * gbproxy: Use IMSI cache to handle PAGING_PS_REJECT * gbproxy: Use C-style comments * gbproxy: Move helper function to a more logical place * gbproxy: Remove unused variable assignment * gbproxy: Fix VTY cmd name * gbproxy: Define and use help string for gbproxy * gbproxy: Add VTY commands to query the TLLI/IMSI cache [ Harald Welte ] * gb_proxy: Don't use orphan log subsystem DPCU [ Daniel Willmann ] * gbproxy: Use IMSI cache for PTP paging and implement DUMMY_PAGING_PS * gbproxy: Print the correct message type for dummy paging/paging reject * gbproxy: Improve log messages in gbproxy_select_sgsn * gbproxy: Fix radio status routing by TMSI [ Alexander Couzens ] * follow libosmocore/gprs_ns2 API changes of GPRS enums [ Harald Welte ] * gbproxy: Avoid depending on any of the SGSN code [ Daniel Willmann ] * manual/gbproxy: Update overview chapter * Rename OsmoGbPROXY -> *Proxy * manuals/gbproxy: Update configuration chapter * manuals/gbproxy: Add osmo-bsc MSC pooling chapter from Neels as a base * manuals/gbproxy: MSC -> SGSN for pooling chapter * manuals/gbproxy: Move pooling to separate chapter [ Alexander Couzens ] * gbproxy: follow gprs_ns2 API vty changes * sgsn: migrate to the new gprs_ns2_vty configuration * follow libosmocore/gprs_ns2 API changes (gprs_ns2_dynamic_create_nse) [ Oliver Smith ] * === Split osmo-gbproxy from osmo-sgsn === -- Oliver Smith Fri, 29 Jan 2021 12:57:28 +0100