This reverts commit 308cb0719dca3ba8eed1eff2a2124d44f34d9a28.
Problems in this commit:
openbsc/src/libbsc/chan_alloc.c:523: case GSM_PCHAN_TCH_F_PDCH:
This is actually wrong, GSM_PCHAN_TCH_F_PDCH use ts->flags, not ts->dyn below
(due to historical reasons and could be unified).
560: if (only_count_tch && !chan_is_tch(ts))
This has exactly one effect: it excludes GSM_PCHAN_TCH_F_PDCH when in PDCH
mode, because for all other PDCH (plain PDCH and TCH/F_TCH/H_PDCH in PDCH mode)
below ts_subslots() returns 0 and skips the for() loop. I consider this a bug
in TCH/F_PDCH, to be fixed in an upcoming commit.
I don't see why we need the only_count_tch argument, because this should
normally only count TCH, weren't it for the TCH/F_PDCH bug.
If dyn TS should be counted differently, we should do this in a different way.
Change-Id: I34dbbaf53a800115e3d03bd44028cad675f3b525
In struct gsm_lchan, add dyn.rqd_ref and dyn.rqd_ta. These save the Channel
Requested details across the PDCH deactivation dance.
abis_rsl.c: add static functions:
* dyn_ts_switchover*() for the various stages of switchover between pchans.
* pchan_for_lchant() to derive the desired pchan from the lchan type that was
set during lchan_alloc().
* rsl_chan_activate_lchan_as_pdch() to compose the simpler RSL CHAN ACT message
without introducing numerous special cases to the normal RSL CHAN ACT code.
In rsl_chan_activate_lchan(), detect and initiate required pchan switchovers if
requested pchan on a dyn TS differs.
In rsl_rx_rf_chan_rel_ack(), initiate or continue pchan switchovers after a
channel was released.
In rsl_rx_chan_act_ack(), notice that a switchover is complete.
In chan_alloc.c, add ts_subslots(): abis_rsl.c will need to know the number of
subslots per pchan, to verify that all lchans are free before dyn TS
switchover. The subslots_per_pchan[] array is static to lchan_alloc.c, and
since we need a non-trivial check for dyn TS anyway, add public ts_subslots()
to lchan_alloc.c, which also checks the current dyn pchan type.
Change-Id: I5c6bce13092a10204113d84678c587c65e35e4fd
The idea of ts_alloc()/ts_free() dates back to the very early days of
OpenBSC, where we didn't yet have a fixed PCHAN type assigned for every
lchan in a BTS. However, ever since, PCHAN types (channel combinations)
are configured by OML in a certain way, and we only allocate LCHANs
inside PCHANs of a matching type. There should be no PCHANs with
type GSM_PCHAN_NONE, unless those that you don't want to use for
administraive reasons or the like.
show net with an CCCH+SDCCH/4+CBCH channel active caused bts_chan_load to read
from invalid memory. Fix this by making sure the pchan array is large enough.
==30346==ERROR: AddressSanitizer: stack-buffer-overflow on address 0x7fff9bdc5dc8 at pc 0x5aeece bp 0x7fff9bdc5350 sp 0x7fff9bdc5348
READ of size 4 at 0x7fff9bdc5dc8 thread T0
#0 0x5aeecd in bts_chan_load /home/alphaone/scm/osmo/openbsc/openbsc/src/libbsc/chan_alloc.c:490
#1 0x5af706 in network_chan_load /home/alphaone/scm/osmo/openbsc/openbsc/src/libbsc/chan_alloc.c:511
#2 0x4b7410 in net_dump_vty /home/alphaone/scm/osmo/openbsc/openbsc/src/libbsc/bsc_vty.c:208
#3 0x4b5f23 in show_net /home/alphaone/scm/osmo/openbsc/openbsc/src/libbsc/bsc_vty.c:227
#4 0x7fdabaa425bd in cmd_execute_command_real /home/alphaone/scm/osmo/libosmocore/src/vty/command.c:2042
#5 0x7fdabaa3f124 in cmd_execute_command /home/alphaone/scm/osmo/libosmocore/src/vty/command.c:2077
#6 0x7fdabaa850e9 in vty_command /home/alphaone/scm/osmo/libosmocore/src/vty/vty.c:402
#7 0x7fdabaa75962 in vty_execute /home/alphaone/scm/osmo/libosmocore/src/vty/vty.c:666
#8 0x7fdabaa6d947 in vty_read /home/alphaone/scm/osmo/libosmocore/src/vty/vty.c:1408
#9 0x7fdabaa9165f in client_data /home/alphaone/scm/osmo/libosmocore/src/vty/telnet_interface.c:119
#10 0x7fdaba7860b6 in osmo_select_main /home/alphaone/scm/osmo/libosmocore/src/select.c:160
#11 0x43c656 in main /home/alphaone/scm/osmo/openbsc/openbsc/src/osmo-nitb/bsc_hack.c:355
#12 0x7fdab92604bc (/lib64/libc.so.6+0x224bc)
#13 0x43b6cc (/home/alphaone/local/osmo-asan/bin/osmo-nitb+0x43b6cc)
Address 0x7fff9bdc5dc8 is located in stack of thread T0 at offset 232 in frame
#0 0x4b5faf in net_dump_vty /home/alphaone/scm/osmo/openbsc/openbsc/src/libbsc/bsc_vty.c:182
This frame has 3 object(s):
[32, 40) ''
[96, 104) ''
[160, 224) 'pl'
HINT: this may be a false positive if your program uses some custom stack unwind mechanism or swapcontext
(longjmp and C++ exceptions *are* supported)
SUMMARY: AddressSanitizer: stack-buffer-overflow /home/alphaone/scm/osmo/openbsc/openbsc/src/libbsc/chan_alloc.c:490 bts_chan_load
The reason for this is quite simple: We want to make sure anyone
running a customized version of OpenBSC to operate a network will
have to release all custom modifiations to the source code.
When the cell becomes visible we will be bombed with location
updating requests and to reduce the load on the network we should
assign as many channels for it as possible. During load peek it
is even more important than to have a spare voice channel and in
general the LU procedure is pretty fast.
A channel will be released in case of
* Errors via the clear_request callback...
* no more transactions and operations are going on.
This means that if we do something without a transaction
the channel might be closed down right away. The bug fix
will be to create a transaction/operation.
With handover and late/early assignment there might be two channels
for one subscriber and only the BSC knows which one to use, so use
the gsm_subscriber_connection everywhere...
Free all allocated channels on the TRX that failed, go through
lchan_free to signal higher layers and then force a reset of
the channel. Make the TRX and TS unusable by setting the operational
set to 0 (not really defined) which should be reset once the
RSL is coming up again.
Neels Hofmeyr
Alexander Couzens
Harald Welte