Add support for 1900 nanoBTS by using unified bts_type
GSM_BTS_TYPE_NANOBTS for 900, 1800 and 1900 versions.
Reduce the nanoBTS enum values to one and derive the
version from the user supplied band. In the future we
might want to do auto band detection.
The configuration file needs to be changed to refer
to nanobts instead of nanobts900/nanobts1800.
Signed-off-by: Mike Haben <michael.haben@btinternet.com>
Signed-off-by: Holger Hans Peter Freyther <zecke@selfish.org>
Addresses a FIXME in abis_nm.c, parsing the parameters
passed by a Software Activate request. I've tested this
on three different IpAccess BTSs (including one which
didn't work with the original code), would be good if
someone could check it on a BS11.
Signed-off-by: Mike Haben <michael.haben@btinternet.com>
Tested-by: Holger Hans Peter Freyther <zecke@selfish.org>
We are using LAC=0 for remembering that a GSM subscriber is
detached. I recently added code to gsm_bts_by_lac that will
return every BTS in case the lac is 0. Harald highlightes
that we would now search for detached subscribers at every
BTS of our network which is clearly not what we want.
Introduce two defines for the two reserved LAC, add a
pointer to the specification, check that our config files
do not contain these reserved values, use the define
and change gsm_bts_by_lac to use the other define.
This is a regression coming from the recent split of the
handle_ts1_read method in two.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Holger Hans Peter Freyther <zecke@selfish.org>
For the MSC<->BSC connection we are going to use the same header
as used from BTS<->BSC but we are not having an E1-Link, a gsm network
or a gsm_bts available and can not use this part of the code.
The LAC can be 16bit of size. the generation of the LAI, struct
gsm_subsriber and the BSC<->MSC was already using it as a
16bit (short) value.
Change struct gsm_bts to parse 16bit and change the vty configuration
parsing code to deal with a short too.
For the on-waves.com MSC case we want to page every BTS reached
of the network. Our gsm_subscriber entry does not have a LAC
entry set and defaults to zero. Use the reserved 0x0000 to
indicate that we want to use every bts in the network.
This will influence the paging code to start and stop paging.
Add one method to extract the MI which will allow to load
the gsm_subscriber depending on the MSC/BSC setup and then
use gsm48_handle_paging_resp to finish the paging response
handling.
Gracefully handle a case where success and expire could fire... I'm
only hitting this when doing something evil to simulate network code
but it seems appropriate to handle this gracefully.
Transfering the cell_identity from BSC to MSC is required for the
on-waves.com support. Allow to set the cell_identity in the cfg
file and patch the system information tables to set it.
tmsi is four octets long, there is no need to make it a string
and then jump through hoops to convert it to a number. Keep the database
using it as a string to benefit from the NULL handling of the db.
Introduce the reserved tmsi which has all bits set to 1 according
to GSM 03.03 §2.4 and start checking for it and make sure the db
code will never allocate such a tmsi.
When only one SMS is sent, the freeing of the lchan will
automatically free all transactions on the lchan.
However, if there are several SMS sent at once, the call
to gsm411_send_sms_lchan will create a new transaction
with the same caracteristics as the previous one. If
the old one is not free'd, the next call to trans_find_by_id
(triggered by the next incoming RP-ACK) will not return the good
transaction and things go haywire.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
The algorithm ID used in the GSM 04.08 RR message is
(x-1) for A5/x. In RSL it's (x+1) for A5/x so there is
a difference of 2.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
This just adds the 04.08 and RSL bits for A5, but not the logic
for performing authentication.
The caller would first set lchan->encr and then call
gsm48_send_rr_ciph_mode(lchan), which encapsulates the 04.08
CIPHERING MODE COMMAND into a RSL ENCRYPTION COMMAND and sends it
to the BTS for execution + forwarding.
This fixes the 'only first call works' problem that some of us were
having with the nanoBTS.
(the field just happenned to be 0 == GSM48_CMODE_SIGN after startup)
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Prefix generate_mid_from_tmsi with a gsm48_, create a new method
to binary encode the imsi. Add a unit test for parsing and decoding.
The implementation can parse the data it generated and the
last octet seems to be filled with the end mark.
Do not advertize to broadcast on a different frequency, this
was only useful for the HAR2009. The frequency list of the cell
probably needs to migrate into the vty config file.
Revert of ee4410a4f312d927dc8b4901c71c52436c18ca4a
Share the initialization and bootstraping of the network by moving
the code to a new file and making boostrap_network and shutdown_net
external.
Cleanup the header list after the move and remove trailing whitespace.
Holger Hans Peter Freyther
Sylvain Munaut
Harald Welte