bts.h refers to struct gsm_bts object, but we still had a bunch of stuff
in bulky gsm_data.* from old days. Let's move stuff where it belongs to
start clean up of gsm_data.
Change-Id: I0a4219e3f64f625ee8b364bf408b8d2bcc8085c5
There's no point in open-coding what LOGPLCHAN was created to do:
Log some event while stating the name of the logical channel.
Change-Id: I6913ac8fb543811126b85a54118333155c03bc03
Fix SID_FIRST_INH detection during speech and when SID_FIRST is interrupted by FACCH.
Fix SID_UPDATE_INH detection during silence and when SID_UPDATE is interrupted by FACCH.
Add a delay for SID_FIRST to appear at the right time after FACCH.
Fix extra byte sent in downlink for SID_FIRST and SID_UPDATE.
Change-Id: Ia811305e15541f2376005df736bd610e8b0d2f69
* Unlike in AMR FR, in AMR HR incoming ONSET have to be treated
differently depending on whether we've recently sent SID UPDATE or
EMPTY frame. Split ST_SID_U FSM state into 2 states to accommodate for
that and make sure that additional states specific to AMR HR are not
used for AMR FR.
* Avoid sending E_VOICE and E_SID_U in corresponding states
as those do not initiate FSM state transitions anyway. This decrease
extra load from FSM signalling which otherwise would be triggered on
per-frame basis.
* Introduce separate signal for SID First P1 -> P2 transition to avoid
confusion with E_COMPL and E_SID_U initiated transitions from P1
state.
* Don't init DTX FSM for SDCCH channels.
Change-Id: I229ba39a38a223fada4881fc9aca35d3639371f8
Related: OS#1801
Check explicitly if DTX is enabled for AMR before checking if SID frame
repetition is optional.
Change-Id: I660688d56505798cade1495c30338fd6806a3259
Related: OS#1801
Add explicit state for recursion (sending the different payload data in
response to the RTS request for same FN) and corresponding
transition. Remove ST_FACCH_V as with new explicit recursion handling it
becomes unreacheable. This makes it easier to maintain
preemption (interruption of current procedure due to FACCH or
Inhibition). This also reduces the number of possible transitions out of
each state thus reducing graph's cyclomatic complexity.
Change-Id: If39b68083d23a4a35f468a5d75f54eb733ebfd14
Introduce dtx_dl_amr_enabled() function which checks that DTX is enabled
and FSM is allocated and use it for all corresponding checks.
Change-Id: Ifa68b641265ed14f242765c85e40da2d1021a541
* re-introduce ST_ONSET_F to guard from repetitive ONSET messages in case
multiple FACCH occur duriing DTX silence period.
* produce ONSET event after both SID FIRST and UPDATE in case of AMR FR.
* always dispatch E_SID_F (SID FIRST) signal if in talkspurt.
* allow E_SID_* right after ONSET (zero-length talkspurt).
* add missing E_ONSET signal description.
* fix FSM transitions for AMR HR *Inhibited and First P*.
* fix incorrect return from l1if_tch_encode() in ONSET FACCH with
incoming SID UPDATE
Change-Id: I0e9033c5f169da46aed9a0d1295faff489778dcf
Related: OS#1801
Handle ONSET cause by Voice and FACCH separately. In case of Voice we
have RTP payload which we have to cache and send later on in next
response to L1 RTS. FACCH have higher priority so it preempts both voice
and silence alike - hence we can send ONSET immediately but still have
to track previous state in order to get back to it gracefully.
This affects lc15 and sysmo hw as there's no FSM-based DTX
implementation for other models yet.
Note: this requires patch for OpenBSC which adds FACCH buffer to tch.dtx
struct.
Change-Id: Idba14dcd0cb12cd7aee86391fcc152c49fcd7052
Related: OS#1802
Previously SID UPDATE was sometimes scheduled incorrectly. Fix this by:
* avoid rounding error when computing scheduling time difference from FN
* properly saving and updating cached SID type and FN
Change-Id: I7acffae4792e7bddc2ae19a2f04ee921dc194c36
Related: OS#1801
Use ARRAY_SIZE macro for each pointer separately.
Fix suggested by Neels Hofmeyr <nhofmeyr@sysmocom.de>.
Change-Id: I68ec1be33fb743977121d654187d85d6b8451e2b
Fixes: Coverity CID 150132
Use dedicated FSM to handle all DTX DL related events:
- add explicit checks if DTX DL is enabled (fixes regression for non-DTX
setup introduced in 654175f33b)
- fix handling of AMR CMI for SPEECH frames
- add FSM for DTX DL
- sync with corresponding changes in OpenBSC's
- handle FACCH-related DTX ONSET events
This affects both lc15 and sysmobts and requires corresponding change in
OpenBSC (Change-Id: Idac8609faf9b5ced818fde899ccfc6ed0c42e8fd).
Change-Id: I74a0b42cb34d525b8a70d264135e82994ca70d31
Move code from tch.c (lc15, sysmo) into generic function which:
- check if talkspurt is happening
- cache SID if necessary or invalidate cache
- fill in CMR & CMI prefix
This also fixes the problem when SID FIRST was cached without sending
just like SID UPDATE instead of being sent right away.
Change-Id: I6c7016a54749abadeef4fd4f5b6f750b256fb916
* consolidate AMR CMR and CMI handling in common/amr.c
* use it in save_last_sid()
* remove dead code
* properly compute RTP payload length for AMR
* use save_last_sid() for FR & HR as well
* invalidate cached SID if SPEECH frame is received
Fixes: OS #1800, #1801
Change-Id: I5a1c1ad0b0a295a50e67775a4db85f1d331755ed
Note: this also require changes to properly link against libosmocodec -
see 2bb65be159dfdabf664fec569b343320301701b0 in libosmocore.
Change-Id: I96594cf3aa1013d505bd20069d5bf261d9a2aefb
Previously SID retransmission was scheduled incorrectly based on GSM
frames instead of voice frames. Fix this by using GSM Fn only as elapsed
time estimation:
* move saved SID retransmission into generic function from lc15 and sysmo
specific code
* split retransmission time check into separate generic function
* compute estimation for elapsed time since last retransmission using
GSM Fn
Change-Id: Ib054b458a7345d9ba40dba53754ca59ab099c8e8
Fixes: OS#1799
Abstract code for checking/setting lchan's UL SID flag and RTP Marker
into generic function and use it for LC15 and sysmoBTS.
Change-Id: Ica5392e92bab29164711163e7b01adb174272883
Related: OS#1750
Extend the router to verify that the message received is
properly encoded. The code can deal with the basic structure
of ETSI OML and vendor specific messages for ip.access and
the osmocom project.
Pau Espin
Harald Welte
Jean-Francois Dionne