Let's add some rate counters to add visibility to the BTS on what is
happening in terms of received and/or transmitted RTP packets.
This should help during debugging any RTP related issues.
Change-Id: Ide674bde10b0e4b501d6a48947b983090342dfec
We have licensed the code under GNU Afffero Public License,
and state that in the first paragraph as well as in the link
to the license. However, a paragraph in the middle stated
"see the GNU General Public License", which is somewhat misleading.
Let's fix that.
Change-Id: I37e503b195fe43e1da42c080900504ca8e682e76
In early-Immediate-Assignment, the BSC sends the IMM ASS message
directly after it sent the Channel Activation message, and osmo-bts
should cache it until the Channel Activation is complete.
So far the code had a bug: it assumed that the lchan was on the same TRX
where the IMM ASS is transmitted -- but actually, 'trx' refers to the
BCCH channel's TRX, i.e. always c0.
Instead, look up the correct TRX by the ARFCN in the IMM ASS message.
Now, when frequency hopping is enabled, there will be no ARFCN in the
IMM ASS message, hence this fix does not work with frequency hopping.
Related osmo-bsc patch disallows this combination.
(To also support frequency hopping, osmo-bsc would need to modify the
RSL protocol: send the IMM ASS message as a custom IE directly as part
of the Channel Activation. Then it is always possible to correllate the
IMM ASS with a specific trx and lchan, no matter what information it
contains. However, early-IA is a "bad" feature in itself as it
"promotes" having high latency on Abis. It seems unnecessary to do extra
work to also support this odd use case for frequency hopping.)
Related: osmo-bsc I8d375e5155be7b53034d5c0be5566d2f33af5db0
Related: SYS#6655
Change-Id: Id9a930e5c67122812b229dc27ea2bfe246b67611
Current code evaluates as follows:
(trx->arfcn | is_uplink) ? GSMTAP_ARFCN_F_UPLINK : 0
while we want it to be evaluated as follows:
trx->arfcn | (is_uplink ? GSMTAP_ARFCN_F_UPLINK : 0)
Change-Id: Ida3d684968a3e4a45531d4b6d7b6af170e3e39f4
Fixes: CID#338165
If there's nothing to transmit over a CSD NT channel, both ends generate
NULL frames. Let's add an option to suppress GSMTAP output for those,
creating pcap files with less noise.
Change-Id: I85a2159cfaa01bfb4205c1462e3a9dbda68e4bad
Depends: libosmocore.git I2d9bd8eb4f0cd0f72c436996767b199429596917
In CSD (Circuit Switched Data) NT (Non-Transparent) mode, there
are RLP (Radio Link Protocol) frames inside the modified V.110.
wireshark alrady has a dissector for this, and we've introduced
a GSMTAP type for RLP some time ago. So with this patch, we now
generate such GSMTAP RLP frames.
Change-Id: I6a258458822bcb3fe7290a9b9b3d104beecda219
Get Attributes of Channel Object class that osmo-bts supports are added:
* ARFCN List
* Channel Combinations
* TSC
* HSN
* MAIO
Related: OS#6172
Change-Id: I56e067be9e5c17625c7da4e982b90927802f57b4
Two Get Attributes of Radio Carrier Object class that osmo-bts supports
are added:
* RF Max Power Reduction
* ARFCN List
Note: Only one ARFCN is reported, because synthesizer hopping is not
supported. The NM_ATT_ARFCN_LIST in the Set Radio Carrier
Attributes message currently allowes one ARFCN only.
Related: OS#6172
Change-Id: I49ab516c38a986520f1d3f6e26ddd20ee16688ac
Most Get Attributes of BTS Object class that osmo-bts supports are
added. Not supported attributes are:
* T200
* Starting Time
* HW Configuration
Related: OS#6172
Change-Id: I067c6bdea3c44d5a731bcfdcfe304c14629eb3db
Osmo-bts uses the new polling based LAPDm implementation.
The OML message NM_ATT_T200 is ignored, because T200 timeouts are set to
the minimal response time. Longer timeouts would cause lower throughput
in case of lost frames. Shorter timeouts would cause LAPDm to fail.
Related: OS#4074
Depends: libosmocore.git I6ebe83f829d7751ea9de1d90eb478c7a628db64c
Change-Id: Ic6d7902b13cf491daaa8752db78f9875387aeffd
If the channel is activated for immediate assignment, the initial data
link establishment on main signaling link with SAPI 0 must have L3
infomation included in the SABM message. If this is not the case,
release the data link without notifying BSC.
Related: OS#5971
Change-Id: I6819b51a876b8743c2d4a04165b7900723a1631c
At the moment the PCU has no way of knowing with which BTS model it is
used with. However, some BTS models may require slightly different
behaviour by the PCU, depending on which BTS model is used. So, lets add
an additional bts_model field to struct gsm_pcu_if_info_ind in order to
convey the exact BTS model to the PCU.
Related: OS#6191
Depends: osmo-pcu.git I48eb75f65ab54fdec41ef913e24c1f18cd4a4047
Change-Id: Ib51238a0e09d4484a539a7f822864189872698b6
When adding support for Circuit Switched Data calls, we had to enlarge
the burst buffer size to accommodate bits for a maximum of 24 bursts.
Let's take advantage of this by utilizing the currently unused part of
the Uplink burst buffer for storing bits of previously decoded blocks.
This eliminates the need to allocate additional memory for SACCH.
Change-Id: I15047cd1df4476054b36f05616e41f5297d9bfe5
Related: SYS#5114, OS#4794, OS#4795, OS#4796
An MPH-INFO message is used to turn detection of uplink access bursts on
or off. Whenever the uplink on a voice group channel is free, the uplink
access burst detection is turned on. When the uplink access is granted
to a talker or when the calling subscriber has been assigned to the
channel, the uplink access burst detection is turned off until the
uplink becomes free again.
Related: OS#4851
Depends: libosmocore.git Ibd6a1d468a70126a8f67e944fcb916969cc3c36b
Change-Id: I92d6773a3a463eb747143c85aa149e54c1fda122
An MPH-INFO message is used to turn detection of uplink access bursts on
or off. This is required for voice group/broadcast channels.
Related: OS#4851
Depends: libosmocore.git Ibd6a1d468a70126a8f67e944fcb916969cc3c36b
Change-Id: I9045437d52984b7abe00fbc815d7f83c62c0fb5a
There are still some remains that are related to the old PCUIF v10
protocol version. Let's clean those up.
Related: OS#5927
Depends: osmo-pcu.git I68a3f59d5c960ae3a4fbd74f9d4a894295cb9ed8
Change-Id: I04f7108c94c99c9920192177087748e8b89b3106
While compiling:
vty.c:169:3: warning: 'is_config_node' is deprecated: Implicit parent
node tracking has replaced the use of this callback. This callback is
no longer called, ever, and can be left NULL. [-Wdeprecated-declarations]
.is_config_node = bts_vty_is_config_node,
^
Change-Id: I54c5aa5911611b181f80e76556b150f25dd5b60c
The PCUIF flag PCU_IF_FLAG_SYSMO was originally used by osmo-bts-sysmo
to signal to the PCU that the direct PHY access for the sysmo-bts DSP
should be enabled. With time, support for other BTS models was added and
the flag became a synonym for "direct PHY access", so it makes sense to
rename it to "PCU_IF_FLAG_DIRECT_PHY"
Related: OS#6191
Depends: osmo-pcu.git I29b7b78a3a91d062b9ea3cd72623d30618cd3f0b
Change-Id: Ib556a93f7d7d7dbe1e96c4a0802bc802241b2b2d
DTX is not allowed for TCH/H in signalling mode, but *is* allowed
for TCH/F in signalling mode.
Change-Id: I91cfd8f561eb47a5fc48c0682d56331a1d69aded
Related: OS#6168
The current implementation does substitute all missing meas samples
with dummy -SUB measurements and then complain about exceeding
amount of -SUB samples.
Change-Id: Iab84f4b64b645486e2f115b0f82ee2f27eb992bc
Related: OS#6168
3GPP TS 45.008, section 8.3 defines TDMA Fn subsets, which shall
always be transmitted when DTX is employed, only for:
* TCH/F in signalling mode (but not for TCH/H),
* TCH/H and TCH/F in data mode (CSD) [*],
* TCH/FS, TCH/EFS, and TCH/HS.
For channel modes employing AMR codec, in particular:
* TCH/AFS, TCH/WFS, O-TCH/WFS,
* TCH/AHS, O-TCH/AHS, O-TCH/WHS,
there exist no fixed TDMA Fn subsets, but DTX is still permitted.
For those we expect at least one SACCH frame, plus a variable
number of speech frames (0 or more).
[*] Handling of data modes is fixed in a follow-up patch.
Change-Id: Ied477528d77871dd7e3b5b7b433a4e33bca40011
Related: OS#6168
It was reported that osmo-bts-sysmo is crashing due to a TCH.ind
primitive being received by l1sap_tch_ind() for an lchan, which
is operating neither in speech nor data, but in signalling mode.
It's not clear which scenario is causing this situation. My best
guess is that one or more TCH.ind primitive(s) remain waiting in
the lower layers and bob up right after the channel mode change.
This can happen, for instance, when a dynamic timeslot gets
switched from TCH/F or TCH/H to PDCH or SDCCH/8.
Change-Id: I2d270ab654fdd9d19d1708ff6c4b4e902bd5d0a3
Fixes: d1f8f3429 "l1sap: proper rate adaptation for CSD"
Closes: OS#6180
System Information Type 10 uses short L2 header that is transmitted as
Bter UI frame. The complete frame is sent by BSC, including short L2
header. Only the SACCH layer 1 header is added by the BTS.
A switch() statement is used, so other System Information with short L2
header can be added in the future.
Change-Id: Ifede42bfd84ea5914b559a20ae68f594d2ee1a5c
Do not forward any message that is received on the uplink to LAPD while
the uplink is not active. If the MS did not recognize (fast enough) that
the uplink is free, it may continue to transmit LAPD messages. A
response by LAPD to these messages is not desired and not required. If
LAPD would respond, it would cause stopping transmission of UPLINK FREE
messages. No MS could access the uplink anymore.
Note: UPLINK FREE messages are repeated automatically until a different
message is transmitted.
Related: OS#5781
Change-Id: I5075115123055b2997481f56ddf473430a1dc9e3
The RSL link is configured/set up by the BBTRANSC NM object, hence move
it to the appropiate substruct.
Related: OS#5253
Change-Id: I62937cbd81c27274b9f5f70d454d5319a6898c7b
This is a preparation commit towards delaying connection of RSL tcp
socket until the BBTRANSC object is OPSTARTed, as it is the case already
in nanoBTS.
Related: OS#5253
Change-Id: Ia571ec19e9e8f8a6d7c2554642aab0afe1b4b917
These attributes are listed in 3GPP TS 52.021, Table 2/GSM 12.21.
Many attributes are still unhandled, but at least something.
Change-Id: I94702c503fea5b42d84673ccd7065c9323b733b8
Related: OS#4505
The previous logic was wrong, since it was only reactivating the channel
if the provided BS_AG_BLKS_RES was != 1.
Example previously broken scenario:
1- osmo-bsc user sets "channel-descrption bs-ag-blks-res 2" during
osmo-bsc startup in osmo-bsc.cfg
2- osmo-bsc user uses VTY to change it to "channel-descrption
bs-ag-blks-res 1"
3- osmo-bsc user uses VTY to deploy the new config: "bts <0-255>
resend-system-information"
Step 3 would fail beforehand, ending up in a NO-OP.
Change-Id: Ibc118e11c64f04de55cb7b94d8bf2c84b431774d
Other bts models like sysmo,lc15,oc2g properly handled
rel_act_kind=LCHAN_REL_ACT_REACT under the bts_model_lchan_deactivate()
implementation, but bts-trx didn't.
As a result, when BCCH_INFO(SYSINFO_TYPE_3) coming from BSC (RSL)
containing a different BS_AG_BLKS_RES triggers CCCH re-activation,
it would only deactivate it but not re-activate it.
That means no SIs were being scheduled if bts was configured with
"channel-descrption bs-ag-blks-res 2" in osmo-bsc.cfg, and phones would
not see the cell.
Related: OS#1575
Change-Id: I61e1681fbaa2c993b529d58b581c99166b62bda3
At the moment we do not print the SAPI, nor the msg_id when we send a
confirmation back to the PCU
Change-Id: Ibd5b4225e597b69eaabaeee437fb637943a55602
elated: OS#5927
In PCUIF v.11 we use PCU_IF_SAPI_AGCH_2 exclusively. We use this SAPI
to transfer IMMEDIATE ASSIGNMENT messages for uplink and downlink. In
both cases we send a confirmation back to the PCU. For details see
coresponding patch in osmo-pcu.git (see Depends)
CAUTION: This patch breaks compatibility to current master osmo-pcu (See
also "Depends")
Related: OS#5927
Depends: osmo-pcu.git I9effdcec1da91a6e2e7a7c41f95d3300ad1bb292
Depends: osmo-ttcn3-hacks.git Iec00d8144dfb2cd8bcee9093c96a3cc98aea6458
Change-Id: I29858fa20ad8bd0aefe81a5c40ad77a2559a8c10
The PCU now sets a confirm flag in struct gsm_pcu_if_pch in case the MAC
block (data) requires a confirmation when sent. Use this confirm flag
instead of making the decision locally based on the MAC block contents.
Related: OS#5927
Depends: osmo-pcu.git Ia202862aafc1f0cb6601574ef61eb9155de11f04
Change-Id: I3364d2268bdef9c4d2feeb8e3d51a64e34bca68c
The function bts_agch_dequeue() is not used outside of bts.c, so it can
be a static function.
Change-Id: If86293ebbd99d6550022aeb8721d40bca5fc04fc
Related: OS#5927
Since we now no longer refer to TLLI when we mean "message ID" (msg_id),
we should also remove the "_DT" / "_dt" suffix from structs and define
constants and replace it with "_2" if required.
Depends: osmo-pcu.git If641b507dcb6b176109c99dce7cff2a7561364b0
Change-Id: Icf85f60ae86fbe1f3b98e1457c0598bb09cb08c5
Related: OS#5927
The function pcu_tx_pch_data_cnf() gets a parameter fn (frame number).
This parameter is then used to populate the member fn in
gsm_pcu_if_data_cnf_dt of the PCUIF protocol. However, the PCU only uses
this parameter for logging and nothing else. Hence it it is not needed
and we can remove it.
Related: OS#5927
Depends: osmo-pcu.git I35bc99eaec5d0287ae3916bc668f0babaddfd6ce
Change-Id: Id1c8fa77725129ec2ea7e92e1df493f35a277659
To confirm downlink IMMEDIATE ASSIGNMENT messages, we use the TLLI as an
identifier and the related struct member is also called "tlli".
Unfortunately this is misleading since the message identifier does not
necessarly have to be a TLLI. It is just an implementation detail that
osmo-pcu uses the TLLI as a message identifier.
To make that clear, lets rename the tlli member (and variable and
parameter names where it is passed on) to "msg_id".
(Since this change only renames variables and struct members it will not
break compatibility with other programs that use the PCUIF)
Related: OS#5927
Depends: osmo-pcu.git I4a25039dfe329e68879bc68936e49c4b190625e6
Change-Id: Ie6b34d5df64f4bed6b14581c7957dcba6af44136
The rate adaptation algorithm is the same for both transparent and
non-transparent channel modes. The only difference is that the
E-bits in the modified CSD frames carry data, like the D-bits.
Change-Id: Ib0d9346d7a8e30b8a8e4b08ee04846ba7d12b3fb
Related: OS#1572
Harald Welte
Neels Hofmeyr
Vadim Yanitskiy
Matan Perelman
Philipp Maier
Andreas Eversberg
Pau Espin