When a NOPE indication is received from the TRX normally a separate
handler (.nope_fn) is called. It turned out that calling the Uplink
handler (.ul_fn) on NOPE indications is the usual case, so let's
remove the .nope_fn member and call the Uplink handler directly.
Since a NOPE.ind comes without burst bits, the Uplink handlers must
check bi->burst_len to avoid uninitialized memory access. For some
logical channels (in particular RACH, PDTCH/U, and PTCCH/U) it does
not make sense to call the Uplink handler, so we ignore them.
Change-Id: Ice45d5986610d9bcef2a7e41f0a395ec779e3928
Related: OS#4461
The MPH INFO MEAS IND indication, which contains the uplink measurement
data is sent in parallel to the PH DATA and TCH indications as a
separate indications. This makes the overall uplink measurement data
processing unnecessarly complex. So lets put the data that is relevant
for measurement into the PH DATA and TCH indications directly.
This change only affects osmo-bts-trx at the moment. In order to keep
the upper layers (l1sap.c) compatible we add an autodection to switch
between separate measurement indications and included measurement data.
Related: OS#2977
Depends: libosmocore I2c34b02d329f9df190c5035c396403ca0a4f9c42
Change-Id: I710d0b7cf193afa8515807836ee69b8b7db84a84
Each logical channel can now optionally have an additional handler,
that will be called when a NOPE / IDLE indication is received from
the transceiver. The aim of that handler is to keep the logical
channel state updated in case if one or more Uplink bursts are lost.
Change-Id: I71c552f44c25e56e9779d8b8ef5d4de9f8475637
Related: OS#3428
This change needs to be done in order avoid adding more and more
arguments to the UL logical channel handlers (such as rx_rach_fn).
Since we have different versions of the TRXD header, and may have
other burst-based PHYs in the future, some fields of an Uplink
burst indication have conditional presence.
Change-Id: Iae6b78bafa4b86d0c681684de47320d641d3f7c0
Related: OS#4006, OS#1855
Let's avoid fancy alignment in the description of logical channels
for the benefits of having better readability, the ability to add
more comments and fields without making it look ugly.
Get rid of value-string array 'trx_chan_type_names', since each
logical channel has its name defined in 'trx_chan_desc'.
Get rid of field 'chan' of 'trx_lchan_desc' structure since it's
not used anywhere, and not actually needed because the position
of each lchan description is defined by its TRXC_* type.
Replace both 'pdch' and 'auto_active' fields with more generic
bitmask field called 'flags', and define the following flags:
- TRX_CHAN_FLAG_AUTO_ACTIVE,
- TRX_CHAN_FLAG_PDCH.
Use RSL channel mode #defines from libosmogsm instead of having
hard-coded numbers. This increases readability.
As a bonus, let's add a human readable description to each lchan
definition, so it can be printed in the VTY some day.
Change-Id: I9d5d49ec569f133d37b8164b22607d4700474315
Backported from: I2fc61e1cdca4690a34e2861b9ee3b7c64ea64843
I7ab4958801b3422973b67ff0452b90afa8a3f501
Before this patch we had:
* osmo-bts-trx internally using 1/256th bit/symbol period
* osmo-bts-sysmo internally using 1/4 bit/smbol period
* PCU interface using 1/4
* L1SAP interface using 1/4
* measurement processing code on top of L1SAP using 1/256
So for sysmo/lc15/octphy we are not loosing resolution, but for
osmo-bts-trx we're arbitrarily reducing the resolution via L1SAP
only then to compute with higher resolution again.
Let's change L1SAP to use 1/256 bits and hence not loose any resolution.
This requires a corresponding change in libosmocore for l1sap.h, which
is found in Change-Id Ibb58113c2819fe2d6d23ecbcfb8b3fce4055025d
Change-Id: If9b0f617845ba6c4aa47969f521734388197c9a7
There's no need to express TOA as a float:
* We receive it as signed 16bit integer in units 1/256 symbol periods
* We pass it to L1SAP as signed integer in 1/4 symbol periods
So turn it into an int16_t with 1/256 symbol period accuracy throughout
the code to avoid both float arithmetic as well as loosing any precision.
Change-Id: Idce4178e0b1f7e940ebc22b3e2f340fcd544d4ec
Fill in values for BER, BTO, Link quality in L1SAP and send them to
PCU. Note: this increases the version of BTS <-> PCU protocol. It also
requires corresponding changes in libosmocore.
All BTS models provide measurements data unless direct DSP access for
PCU is enabled. For BTS-specific notes see below.
Octphy: conversion from sSNRDb to Link Quality uses formulae which works
in practice instead of what's documented for sSNRDb value. Subject to
change in future revisions.
TRX: C / I link quality estimator is not computed.
Change-Id: Ic9693a044756fb1c7bd2ff3cfa0db042c3c4e01c
Related: OS#1616
Existing interfaces are coded with the implicit expectation of using
a burst sequence length of 148, which is constant with GSM and GPRS.
That changes with EGPRS, where the burst length may be 444 due to
the use of 8-PSK instead of GMSK modulation.
Setup the interface to accept and return a length value with the
burst sequence. This allows 444 length bit vectors to/from the
EGPRS decoder/encoder. Length is explicitly used as a identifier for
8-PSK vs. GMSK modulated sequences.
Change-Id: I90b46b46b11b6ce280e7f8232d5a2fccec2d4f18
Signed-off-by: Tom Tsou <tom.tsou@ettus.com>
Includes EGPRS specific convolutional codes, interleaving tables
and functions, burst mappings, training sequences, and parity
checks from 3GPP TS 44.060 needed to handle MCS codings 1-9.
Change-Id: Ie270398dd7a72f282ba53e646853d8de1eabee93
Signed-off-by: Tom Tsou <tom.tsou@ettus.com>
Previously osmo-bts-octphy have not provided in-band presence
information which cause off-by-one errors and misinterpretation of
ph_data_ind by PCU. This fixed now by adding support for explicitly
passing PH-DATA presence info. Corresponding check and in-band passing
of presence information are removed.
Note: this requires libosmocore version with osmo_ph_pres_info_type
support integrated.
[hfreyther/max: Remove + 1 from the decoded length]
Philipp Maier
Vadim Yanitskiy
Harald Welte