common/l1sap: For dyn TS, the BSC will issue RSL Chan Activ requests with a
non-standard chan_nr. While the rest of the code now understands that, the L1
phy will not. Translate to standard PDCH (== TCH/F).
common/oml: use dyn TS' current pchan mode for lchans config.
common/pcu_sock: detect desired PDCH mode of dyn TS.
common/rsl: implement reconnection chain of a TS for changing its pchan:
* rsl_rx_chan_activ():
** Add dyn_pchan_from_chan_nr() to derive the requested pchan from the RSL
chan_nr IE.
** Notice the need for a pchan change and invoke dyn_ts_l1_reconnect() (s.b.)
** Make Chan Mode IE presence optional, because the non-standard PDCH
activation message is simpler and does not require it.
** Do PDCH activation via PCU.
* Add dyn_ts_l1_reconnect(): store state and disconnect the L1 channel;
then wait for cb_ts_disconnected().
* Add osmo_dyn_ts_disconnected() to cb_ts_disconnected():
verify state and connect with the new pchan type; then wait for
cb_ts_connected().
* Add osmo_dyn_ts_connected() to cb_ts_connected(), which re-issues
the cached chan activation message from before disconnecting the L1 channel.
* Also send an rf chan rel/act ack for dyn TS upon PDCH de/act via PCU.
* Add dyn_ts_pdch_release(): on channel release of a dyn TS in PDCH mode,
release via the PCU. Call from rsl_rx_rd_chan_rel().
Change-Id: I463bb6b4e57674f091c3badba9257374961c52c7
We're about to introduce a new kind of dynamic channel, which will also use
parts of the ip.access mode dyn PDCH code paths. Make sure the general parts
have general names and mark ip.access specific parts as such.
Rename dyn_pdch_ts_[dis]connected() to cb_ts_[dis]connected().
Rename dyn_pdch_complete to ipacc_dyn_pdch_complete().
From cb_ts_[dis]connected(), factor out the current code into static
functions ipacc_dyn_pdch_[dis]connected() -- this will make sense once the
new dynamic kind is added to cb_ts_[dis]connected().
Change-Id: I7da5b7cb7b48572671f50e0dec97d9eec3083df1
React on IPAC PDCH ACT and DEACT messages and invoke the PCU and bts_model_ts_*
APIs to effect switchover. The dyn PDCH interaction is described in the comment
to rsl_rx_dyn_pdch(), the main entry point for PDCH switchover.
In case the bts_model_ts_* are not implemented (or return other errors),
reply with an IPAC PDCH ACT/DEACT NACK.
Add callbacks that mark steps in the PDCH switchover process,
dyn_pdch_ts_disconnected(), dyn_pdch_ts_connected() and dyn_pdch_complete().
Add hooks in l1sap.c on channel activation and release confirmation, to call
dyn PDCH callbacks.
BTS dyn PDCH implementations should invoke dyn_pdch_ts_disconnected() and
dyn_pdch_ts_connected() when bts_model_ts_disconnect() or
bts_model_ts_connect() are called, respectively. (upcoming for sysmoBTS)
Change-Id: Id2f5f77121a65d6c14eac127b3d4fb50e97a77ab
Compute RTP user_ts adjustment based on the difference between current
and previous FN instead of hard-coded value.
Change-Id: If1677ddcf754b29990ff7cd846e11c32e3d30b33
Related: OS#1562
Reviewed-on: https://gerrit.osmocom.org/196
Tested-by: Jenkins Builder
Reviewed-by: Harald Welte <laforge@gnumonks.org>
Previously osmo-bts-octphy have not provided in-band presence
information which cause off-by-one errors and misinterpretation of
ph_data_ind by PCU. This fixed now by adding support for explicitly
passing PH-DATA presence info. Corresponding check and in-band passing
of presence information are removed.
Note: this requires libosmocore version with osmo_ph_pres_info_type
support integrated.
[hfreyther/max: Remove + 1 from the decoded length]
During the L1SAP related changes, somehow an old version of
check_for_ciph_cmd() was re-introduced, which didn't store the N(s) as
part of the lchan. To make things worse, the old code was still present
in the sysmobts specific part, but never executed.
In some situations, a PHY might send us a primitive for a logical
channel that is not (or no longer) active. Passing such primitives
higher up the stack is asking for trouble. Specifically, LAPDm
instances cannot accept messages once their instance has been released.
We introduce two new helper functions: get_lchan_by_chan_nr() as well as
get_active_lchan_by_chan_nr(). The former just centralizes the look-up
of the lchan by timeslot number and sub-slot number. The latter also
checks to ensure the lchan is active, which is used for PH-DATA / PH-RTS
primitives. To the contrary, MPH primitives generally don't require the
cahnnel to be active for processing.
MS uplink power control is required in pretty much any BTS, and we
cannot assume that they PHY / L1 will always take care of it by
itself. So the correspondign code is moved to common/power_control.c
and called from the generic part of L1SAP.
The corresponding VTY paramter has been moved from the sysmobts-specific
trx VTY node to the common BTS VTY node.
There are three transitions:
1. LCHAN_CIPH_NONE -> LCHAN_CIPH_RX_REQ -> LCHAN_CIPH_RX_CONF
It is used to enable ciphering in RX (uplink) direction only.
2. LCHAN_CIPH_RX_CONF -> LCHAN_CIPH_RX_CONF_TX_REQ -> LCHAN_CIPH_RXTX_CONF
It is used to additionally enable ciphering in TX (downlink) direction.
3. LCHAN_CIPH_NONE -> LCHAN_CIPH_RXTX_REQ -> LCHAN_CIPH_RX_CONF_TX_REQ
-> LCHAN_CIPH_RXTX_CONF
It is used to enable ciphering in both TX and RX directions. This is used
when the channel is activated with encryption already enabled. (assignment
or handover)
In order to follow the order of these transitions, the RX direction must
always be set before the TX direction.
If no cipher key is set (A5/0), ciphering is set to ALG 0, but lchan cipher
state remains at LCHAN_CIPH_NONE.
This part moves control channel message primitives from osmo-bts-sysmo to
common part.
In order to control ciphering fo BTS model, CIPHER (MPH_INFO) messages are
used.
The original code handled both the fact where a TIME indication would be
missed (and thus the frame number be higher than previous + 1), as well
as the two cases for combined / non-combined CCCH.
The L1SAP code removed some of those bits, which I'm re-introducing
here.
This is a regression of the code compared to the existing
sysmoBTS code, where the L1 tells us whether its AGCH or
PCH. However, it was not used even in the old code, so
we can afford to simply put a #warning here.
This first part moves BCCH message primitives from osmo-bts-sysmo to common
part. A new file "common/l1sap.c" is introduced to implement handling of
layer 1 messages from/to BTS model.
Neels Hofmeyr
Harald Welte