This way the data model in TS 12.21 (Figure 1) is followed, where
there's a BTS Site Manager containing one or more BTS. In our case we
only support 1 BTS (cell) so far.
Change-Id: Ideb0d458ec631008223f861cf8b46d09524a1a21
Related: OS#5994
As it has come up during code review of Change-ID
I214af0448652a9f321ccbab77977b67663ba28f9 introducing LOGPLCNF, my
approach to the strict preserval of argument order (lchan first from
LOGPLCHAN and fn *after* loglevel from LOGPFN) was considered
sub-optimal.
I used the following spatch rule to clean this up:
@@
expression lc, ss, logl, fn;
expression list trailer;
@@
-LOGPLCFN(lc, ss, logl, fn, trailer);
+LOGPLCFN(lc, fn, ss, logl, trailer);
Change-Id: Iba4a8416545673d03cb057e4855f8b1ecae3e1ec
Add the BTS object to the BTS list as the first thing after it is created,
this way it's always attached and hence simply always detach it during
object free.
Change-Id: Ica4fe2a4be0c85b10702011e978be03bf970b0c8
Move it together with the other similar objects like gprs_nse and
gprs_cell.
Move the "mo" field to the start of the struct, similar to the other
types.
Change-Id: I5dc020a6bab8c94ab831b6ca506bc5cb681d07a3
Octet 2 should contain the address of the GPRS cell in the GPRS NSE
object. Since there's 1 GPRS Cell per BTS and we have only 1 BTS in
osmo-bts, then this address should be 0.
Otherwise, osmo-bts answers sometimes using (0x00, 0xff,0xff) instead of
requested (0x00, 0x00, 0xff), for instance when ACKing an Admin Unlock.
This is kinda still fine since value 0xff has the meaning of "all"
addresses, and that means the only one available.
Still, it's not the proper way to identify the object, so this patch
fixes it.
Change-Id: I2ea05778f5b5ac335c75f3958324664553da7f0d
This way we have further control on how to handle the OPSTART messages
received. For instance, NACK them if the NM object FSMs are not at the
expected correct state.
Related: OS#5992
Change-Id: I5df0bfb4cc812c11c7a00a8ffa882ae1915d562f
The param is usually called obj_class, but here it is called kind.
In any case, change the param to pass the related struct gsm_abis_mo
(which still contains mo->obj_class), similar to what's done in other
bts_model functions such as bts_model_opstart().
Change-Id: Ife2e98a791455d5f7e7052356d559af2f1d4d185
This way we simplify the common lower level interface. It can be added
in the future again if it is really required at any point to pass/use
specific TLV values in the device-specific code.
Change-Id: I64c6c6834e277b1d75a97d6f408e7e1b7ca85832
Simply return error codes from lower layer implementations, and do
the OML handling in the common NM TS 12.21 FSMs.
As a result, we simplify the logic in the lower layers.
Change-Id: I281c07bb5ad88ee03542f092141cebe036d10aee
We have LOGPLCHAN and LOGPGT, but not a combined version for logging
both the lchan and the gsm_time. Let's resolve this.
Log messages without indicating the lchan name are pretty useless if you
have multiple concurrently active lchans...
Change-Id: I4bf3363f92acdf67d8e7333e30ac2209e31cb287
This way we have further control on how to handle the SetAttr meessages
received. For instance, NACK them if the NM object FSMs are not at the expected
correct state.
The originating msgs are now kept owned and freed by the OML layer
(oml.c), and the NM FSMs only uses them and create new OML msgb when
answering with ACK/NACK.
Related: OS#5992
Change-Id: Id68868e25bbf96227ab6459fcd3c9181852ed28e
Calls to bts_model_apply_oml() are done only for BTS, RCARRIER and
RCHANNEL NM Objects in their respective Rx code paths (and they will
be moved to respective FSMs in follow up patches). This function is
never called with any of the GPRS NM objects.
These NM Objectes have the NM_MT_IPACC_SET_ATTR msg ACKED/NACKED in its
own path:
oml_ipa_set_attr()
rc = oml_ipa_mo_set_attr()
return oml_fom_ack_nack(msg, rc);
Change-Id: I1a0d38a122f50ffe749ebc4f1cc11235ca516586
The function repeat_last_sid() is implemented in the common part,
but is only used by osmo-bts-{lc15,oc2g,sysmo} models. These BTS
models call this function when they are looking to see if a
previously cached SID frame needs to retransmitted on the DL
because it is that time according to the SACCH multiframe.
Out of non-AMR codecs, this function previously supported only
FR1 and HR1, but failed to support EFR. Fix that omission.
Change-Id: Iebcd28e65af889254740757eed9c579392eb1c33
Automatic generation of a header file using a C program built during
build of osmo-bts creates several problems when cross-compiling.
The generated header file is only 59 lines long, so let's have it
generated in order to avoid having to call the helper program every
time.
A Makefile target is added to easily regenerate the file manually in
case it's needed:
make -C contrib/ber/ update_codec_bit_class_h
Fixes: acf0f0f0bb
Change-Id: I97efdb4ee00537fcae191b4267d0211d582ef372
There was a surprising number of explicit gsm_lchan_name() calls
from within log message code. Let's avoid that whenever possible and
use a LOGPLCHAN() or related macro.
Change-Id: If4f4f555f5ca61dfa624b298805f5375efc0b137
When FACCH stealing occurs and sysmoBTS L1 delivers GsmL1_Sapi_FacchF
instead of GsmL1_Sapi_TchF, that 20 ms unit still needs to be
accounted for in the RTP timestamp cadence, and if we run with
rtp continuous-streaming enabled, then an actual BFI packet needs
to be emitted. The original code failed to do either; the present
change implements correct behavior for TCH/F.
The present patch only covers the case of TCH/F; handling of TCH/H
is left as a FIXME for other/later developers.
Related: OS#5974
Change-Id: I39d15faade28fb7d670493a99a0e0bdb654e2a4a
The check for (tch_ind->lqual_cb >= bts->min_qual_norm) in
l1sap_tch_ind() has the intent of suppressing valid-seeming
speech frame output from lower layers when the link quality is
too low; this check is particularly important for FR1 codec
where the intrinsic validity check is only a 3-bit CRC which has
1/8 probability of indicating "correct" when decoding radio noise
during DTXu silence.
However, this check is effectively defeated in the current
implementation of rtp continuous-streaming: the RTP packet being
output is the presumed-bogus speech frame from lower layers,
rather than the intended zero-length payload. Fix this bug.
Related: OS#5975
Change-Id: Icee0f57be289a0592a0197469432a012d15f224c
This implements RTP based GSM BER testing for osmo-bts, implementing
ideas described in https://osmocom.org/projects/osmobts/wiki/BER_Testing
In short: The command transmits a PRBS sequence encapsulated in RTP
frames, which are sent to the BTS, which transmits that data in the
(unimpaired) downlink. The mobile station receives the data and is
instructed to loop it back in the (possibly impaired) uplink. The BTS
receives that uplink, puts in in RTP frames which end up being received
back by this very tool. By correlating the received RTP with the PRBS
sequence, this tool can compute the BER (Bit Error Rate) of the
(possibly impaired) uplink. Doing this with different RF channel model
simulators in the uplink allows to establish BER at different levels and
channel conditions.
Original code by Sylvain Munaut extended with some comments and Automake
integration by Harald Welte.
Change-Id: I1cffa0ae959e29ec61775b13185fd1057ed7485a
oml.c: In function ‘bts_model_apply_oml’:
oml.c:1814:17: error: variable ‘cell_size’ set but not used [-Werror=unused-but-set-variable]
1814 | uint8_t cell_size;
| ^~~~~~~~~
Change-Id: I0bf1542f613f613d03609d50836137ff440401af
This default phase of the Codec Mode Indication in downlink direction is
called "odd", which is defined by starting with CMC in every 26
multiframe.
At call set-up, after every successful handover and after a channel mode
modify, the default phase (odd) shall be used in downlink direction.
During a call, the phase of Codec Mode Indication may be changed in
downlink by using a RATSCCH message.
As we don't implement RATSCCH, odd is always correct.
Change-Id: Ia64767fbfdc3fb067d72dbf5eabb1d84e3868ce5
oml.c: In function ‘bts_model_opstart’:
oml.c:1883:32: warning: variable ‘ts’ set but not used [-Wunused-but-set-variable]
1883 | struct gsm_bts_trx_ts *ts;
| ^~
Change-Id: Ifd5552f2dd56f4f9bf4c17d25b741f694f4f2168
l1_if.c: In function ‘activate_rf_compl_cb’:
l1_if.c:1280:17: error: this ‘if’ clause does not guard... [-Werror=misleading-indentation]
1280 | if (bts_lc15->led_ctrl_mode == LC15_LED_CONTROL_BTS)
| ^~
In file included from ../../include/osmo-bts/dtx_dl_amr_fsm.h:3,
from ../../include/osmo-bts/msg_utils.h:8,
from l1_if.c:55:
l1_if.c:1282:25: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
1282 | osmo_fsm_inst_dispatch(trx->mo.fi, NM_EV_DISABLE, NULL);
| ^~~~~~~~~~~~~~~~~~~~~~
Change-Id: I00ae3faf0f85fecf6e15e71dff071165725e547c
Our linter would complain about this these days:
__func__ should be used instead of gcc specific __FUNCTION__
Change-Id: I80bf6d0a89ce6454ae063759d6088a28b04670c0
In some environments it is highly desirable for the RTP stream
coming from each GSM call UL on a BTS to be fully continuous,
without any gaps, with _some_ RTP packet emitted every 20 ms,
even if there is no speech or SID frame to be sent in that frame
time window. The present change adds an rtp continuous-streaming
vty option which, when enabled, causes the BTS to emit RTP packets
with a zero-length payload, instead of producing gaps in the RTP
stream, when it has nothing else to send.
Related: OS#5975
Change-Id: Ic0e2edf2ed90ba0ac6bee5e7d9629bf0255e256d
Handling of SID in EFR mode was broken in osmo-bts-sysmo.
l1_to_rtppayload_efr(), the function for UL Rx, was using completely
bogus logic (passing bits in ETSI TS 101 318 EFR format to an AMR
decoding function), whereas l1if_tch_encode(), the function for
DL Tx, had missing SID logic for EFR while supporting SID detection
for all other codecs. The fix is to use the new osmo_efr_check_sid()
function in libosmocodec.
Change-Id: Ia56c1bb7432968685110456961d24a907b0a201f
The TCH/F Rx code in osmo-bts-trx uses osmo_fr_check_sid() to detect
when the MS sends SID, and passes the flag to lchan_set_marker().
However, equivalent logic was missing for EFR, as until recently
there was no EFR SID check function in libosmocodec. Now that
we have osmo_efr_check_sid(), use it.
Change-Id: Ib043e00dbf92145c2a6c32f6365517244472a922
So far we only printed it during later modification. Let's print
it also during initial activation of a logical channel.
Change-Id: I6982a52905e4719e2e9c40630252ffef2ff9fbed
When we receive a SID_FIRST_P1 frame from the PHY (during AMR/HR DTXu),
we must generate a SID frame on the RTP side.
The existing code
* ignored that the Amr_SidFirstP1 PHYIF message actually contains the
RTP payload
* manually generated the same content using osmo_amr_rtp_enc()
* forgot to prefix that with the AMR CMR+TOC
* in the end, sent a completely broken (too short) AMR SID frame over RTP
Let's fix this by simply using the 7-byte RTP payload with CMR+TOC that
the PHY is providing to us.
Change-Id: I90479efcc002d497648a71e73847af54e6208358
Related: OS#5944
So far, we've had LOGPLCHAN() and LOGPFN(). This resulted in a number
of log lines containing frame numbers *not* containing the lchan
context, which makes it difficult to deterine which of potentially many
concurrently active lchans is logging.
Let's introduce LOGPLCFN() for a FN-extended version of LOGPLCHAN(),
and convert all callers that have the related context.
Change-Id: I214af0448652a9f321ccbab77977b67663ba28f9
We're printing DEBUG messages for all other DTX frames, but not for
ONSET. This made me think that we never received any ONSET frames
when looking at log output.
Let's add ONSET for completeness.
Related: OS#5944
Change-Id: I9a1511d9929444cef96388492d907e8f3a082311
ph_tch_req() is a recursive function and conditionally calls itself at
the very bottom. The recursive call happens iff all of the following
conditions are met:
* DTXd is enabled,
* AMR codec is in use,
* DTX DL AMR FSM state is recursive.
The problem is that ph_tch_req() may pull sizeof(*lsap) from the given
msgb twice: during the initial and the recursive calls. The second
attempt to pull sizeof(*lsap) causes the process to abort, because
the remaining room is less than it's attempting to pull.
AFAICT, doing msgb_pull() is not really necessary, given that
l1sap_tch_rts_ind() thankfully does set msg->l2h before pushing
the lsap header in front of the actual frame.
Update osmo-bts-sysmo and its copy-pasted siblings, which are likely
affected too, except osmo-bts-octphy which does not do the recursion.
Change-Id: Ib349b74a9e4bd48c902286f872d3b0e9a068256c
Related: OS#5925
It makes no sense to push interference meas results for those TRX since
they are disabled, unused and hence won't be reported in RSL RF Res Ind.
Related: SYS#6370
Change-Id: Ie3fd80970585cb30808b0644568dbc8936a57721
Pau Espin
Harald Welte
Mychaela N. Falconia
Vadim Yanitskiy
Sylvain Munaut