Currently an Uplink SACCH block is being passed to LAPDm first, and
then gets forwareded to the BSC in handle_ms_meas_report(), together
with the Uplink measurements collected so far.
This approach has a serious flaw: handle_ms_meas_report() won't be
called if an Uplink block contains SAPI=3 data (SMS) or was not
decoded at all (len=0) fow whatever reason. Therefore, no RSL
MEASurement RESult message will be sent to the BSC.
Rename handle_ms_meas_report() to lchan_meas_handle_sacch(), and call
it from l1sap_ph_data_ind(). This way perioduc RSL MEASurement RESult
messages will be sent regardless of what happens on Uplink SACCH.
Change-Id: Ifed91f87fd653debc87a09da3fd31ad64a13f330
Fixes: TC_meas_res_speech_{tchf,tchh}_sapi3
Related: SYS#5319
This is a preparation commit in order to move power loops up in the
stack in order to have DTXu information available, in order to decide
whether SUB or FULL ul measurements should be used in the MS Power
Control Loop.
Function rsl_tx_meas_res() is stripped from code changing state, and it
simply encodes content and transmits the message.
Change-Id: Id67259ec9ac4c2c33bd0eef3f64450affbe3fb9f
The only reason why it was not 'const' is that in lchan_new_ul_meas()
we may need to overwrite 'ulm->is_sub'. This can still be done after
memcpy()ing a new set of samples to the destination buffer.
Change-Id: I0cabf75f8e0bf793c01225a4a8433e994c93f562
Related: OS#5024
The function ts45008_83_is_sub rougly decides if a frame is a SUB frame
or not. This works by checking the frame number against against lookup
tables. This works fine for codecs where the occurrence of SUB frames is
fixed. However for AMR this is not the case as the DTX periods are
dynamic. Here it is the responsibility of the lower layers (phy,
frame decoding) to tag SUB frames early since making the decision later
based on the frame number is not possible.
The parameter is_amr_sid_update was probably added as a placeholder. It
is set to falls by the callers of the function. Lets remove this
parameter as a late decision if an AMR frame is a SUB frame will never
work.
Change-Id: I125d5ff592218a9e98130a6a7b6bbc6378ce4132
Related: OS#2978
The unit test that tests lchan_meas_process_measurement() only inputs
test data to lchan_meas_process_measurement() but it is not checked if
the interval end could be detected or not.
- Add a return code to lchan_meas_process_measurement()
- Ensure that the return code is checked in the unit-test
Change-Id: I9e00ce683e8c44528804f65181dbfed9e85e3aed
Related: OS#2975
The function is_meas_overdue() was introduced to allow
lchan_meas_process_measurement() to detect when the end of a measurement
interval has been missed. Interval ends may be missed when the SACCH
block of the related measurement interval gets lost. This is due to the
fact that the SACCH block is used as a trigger to start the measurement
result computation.
The idea behind is_meas_overdue() was to check the frame number of the
current measurement against the frame number of the previous measurement
in order to see if there was a measurement for SACCH in between or not.
Unfortunately SACCH and TCH Voice data is not necessarly processed in
order by each phy. Depending on the phy there may be a jitter between
the timing of SACCH and TCH Voice. Depending on the phy this jitter may
be enough to mess up the timing so that we see a SACCH block earlier
than expected. So we can not use the current frame number of TCH Voice
measurements to check for missed SACCH blocks.
Change-Id: Idfdbf64c1f965f35c12559b3995e2b746c74ee9e
Related: OS#3502
Related: OS#2975
The function ts45008_83_is_sub() is an integral part of the measurement
calculation as it automatically tags incoming measurements as SUB
measurements. This is important in the context of DTX. Unfortunately
there is no unit test for this function yet.
- Add unit test for ts45008_83_is_sub()
Change-Id: Ia26774859f4bf31baee075896905079368bddd42
Related: OS#3502
We do not test is_meas_complete() individually yet, but it is an
integral part of the measurement processings since this function decides
where a measurement interval ends.
- Add unit tests that test TCH/F, TCH/H, SDCCH/4 and STDCH/8
Change-Id: I8f89d9e7092cd65ba4d5c5649140692dcc20bdd6
Related: OS#2987
the measurement interval end is detected by using the measurement
indication that is related to the SACCH block as a trigger to start the
computation. If the measurement indication for the SACCH gets lost
because the block could not be received then the processing is not
executed. This may cause wrong results or when it happens condecutively
an overflow of the measurement sample buffer.
- Store the frame number of the last received measurement indication
- Use the stored frame number to check if an interval was crossed when
the next measurement indication is received. If we detect that we
missed the interval, catch up by running the computation and
start the next interval.
Change-Id: I3a86cd8185cc6b94258373fe929f0c2f1cf27cfa
Related: OS#2975
At the moment only lchan_meas_reset is reset on channel activation.
All other states are not reset. This may lead to irretations in the
first measurement interval if there are still leftover messages from
a previous connection. Lets ensure everything is reset to zero by
zeroing out the whole .meas struct in struct lchan.
- Add a centralized function that does the reset
- Call that function from rsl_tx_chan_act_ack() in rsl.c
Change-Id: I880ae3030df6dcd60c32b7144c3430528429bdea
Related: OS#2975
Related: OS#2987
In l1sap.c we call lchan_new_ul_meas() and lchan_meas_check_compute()
directly in sequence. Lets unify thos two steps inside measurement.c so
that we only need to call one function from l1sap.c.
Change-Id: If48bc7442dfaab8c36b93949f741de6e836e792a
Related: OS#2975
This is currently only used for logging, but will be needed for proper
RX{LEV,QUAL}-SUB reporting in upcoming patches.
Related: OS#2978
Change-Id: I07fd06e8a379cab7c0c2eb111c3f5600037d3c9e
We used to have trx_meas_check_compute() and call that from the
bts-specific code in order to iterate over all timeslots and all lchans
in the timeslots if we have to send measurement reports. This was
executed once per frame, and created unequal CPU load over time, which
in turn might increase different per-ts jitter.
Since 2f028c4e2c in April 2017 we have
lchan_meas_check_compute(), which performs this on a per-lchan basis,
and hence CPU load is distributed over all active timeslots.
Change-Id: I6308cefe4a51e55719ea4ed4d613d3782b805c08
Timing advance is currently not taken into account when computing
the measurement results, this commit fixes that
Change-Id: I2e0dfd13b53e8aa2822985f12bf2985e683ab553
lchan_meas_check_compute() is a static function measurement.c.
In order to distribute the measurement result calculation events,
we need to be able to call lchan_meas_check_compute() from l1sap.c
Change-Id: Ideffe896613e0feda443bc13dac59dcdbbc605aa
* gather measurements from each PH-DATA.ind
* check every TDMA frame about meas period expiration
* compute averages after period expired
* put MS DL MEAS REP into RSL MEAS RES messages, include UL meas
bugs:
* L3 INFO content seems to have some offset
* is_sub is not set anywhere
* measurement periods might have up/downlink offset
Vadim Yanitskiy
Pau Espin
Philipp Maier
Harald Welte
Max