The RSL link is configured/set up by the BBTRANSC NM object, hence move
it to the appropiate substruct.
Related: OS#5253
Change-Id: I62937cbd81c27274b9f5f70d454d5319a6898c7b
This is a preparation commit towards delaying connection of RSL tcp
socket until the BBTRANSC object is OPSTARTed, as it is the case already
in nanoBTS.
Related: OS#5253
Change-Id: Ia571ec19e9e8f8a6d7c2554642aab0afe1b4b917
When BCCH INFO is received via RSL message, the rest octet of the System
Information 1 message is parsed to get the position of the NCH. The
position is stored in the gsm_bts structure. If the position is not
present int the rest octet, the stored value is set to negative.
Change-Id: I799a27179d478d4ff577d8bc47ae524834851e85
Related: OS#5781
Similar to what is already provided for power control loops. However,
there's no existing way to communicate TA control parameters from the
BSC to the BTS, so implement them locally in BTS vty.
Related: SYS#5371
Change-Id: I9fa71f836bb9a79b0ef2567bfcfdf38ff217840b
gsm_bts_trx_alloc() already does initialize some fields of the
allocated 'struct gsm_bts_trx' instance, and having an additional
function for initializing the other fields makes no sense.
Note that I intentionally didn't merge a call to bts_model_trx_init()
into gsm_bts_trx_alloc(), because this would break some assumptions
regarding the order of initialization and cause regressions.
This also allows us to not call bts_model_trx_init() from tests.
Change-Id: I4aefaf47b05a67ec0c4774c1ee7abcc95e04cc13
First of all, there is no reason to use a void pointer because
it's always 'struct phy_instance'. Also, no need to encapsulate
this pointer into 'role_bts' because there are no other roles in
osmo-bts (we used to have shared headers years ago).
This commit also fixes a bug in test_sysmobts_auto_band(), where a
pointer to 'struct femtol1_hdl' was directly assigned to trx.pinst.
Change-Id: I9bd6f0921e0c6bf824d38485486ad78864cbe17e
For the sake of simplicity, the old structures that are still used
by MS/BS power control loops are kept in place. Migration to the
new structures requires additional changes to the existing power
control logic, so it will be done in the follow-up changes.
The new parameters are integrated as follows:
+ struct gsm_bts - a BTS instance:
| Hard-coded default (fall-back) parameters for all transceivers.
|
+-+-> struct gsm_bts_trx - a TRX instance (transceiver):
| Default parameters for all logical channels inherited from
| 'struct gsm_bts' at start-up. May be overwritten by the
| BSC using ip.access specific 'Measurement Pre-processing
| Defaults' message on the A-bis/RSL interface.
|
+---> struct gsm_lchan - a logical channel (e.g. TCH or SDCCH):
Connection specific parameters inherited from 'struct
gsm_bts_trx'. May be overwritten by parameters sent
by the BSC in CHANnel ACTIVation and other messages.
Change-Id: I6d41eb238aa6d4f5b77596c5477c2ecbe86de2a8
Related: SYS#4918
All the Operative State logic to manage a RadioCarrier//BBTransc NM objects is
centralized in these FSM, where other parts of the code simply send
events to it.
This allows keeping state consistent and offloading logic from each bts
backend, since they are only required to submit events now.
The idea in the long run is to also replace other NM objects with
similar FSMs.
This improved logic fixes bug where PHY + RSL link became available before
OPSTART and hence op state changed to Enabled before receiving any OPSTART message.
Change-Id: Ifb249a821c4270918699b6375a72b3a618e8cfbe
Most likely, this part of the structure was copy-pasted from the
corresponding definition in osmo-bsc. In osmo-bts we always
establish a single per-BTS OML link, not per-TRX.
Change-Id: I1792372de484608e04211c9de4294b3c76173ead
Operative state is mainly maintained based on 2 requirements:
* phy_link being in CONNECTED state
* RSL connection being up and ready
However, state change report triggered over OMl towards BSC was only
done upon the first event of the two. That means that if for whatever
reason the RSL connection was established AFTER the phy_link became
CONNECTED (ie receiving RSP POWERON in osmo-bts-trx), then the status
towards the BSC would not be updated and hence the BSC would still see
the Radio Carrier object as DISABLED.
The trx_set_available() function is renamed to trx_operability_update()
to keep the logic conditions in one place, and different events
triggering a change in state simply call the function and let it handle
the new state.
Related: SYS#5063
Change-Id: Ic00df9e7278d42bc10c1e1a1c0edde7e13199299
Move all struct gsm_bts_trx references from bulky gsm_data to its own
file containing all related definitions and implementations. Also move a
few functions clearly related to that object which were placed in bts.*
Change-Id: Iebaf5b221c48b571f45408af867ce6f9c0cd9f4a
Vadim Yanitskiy
Pau Espin
Andreas Eversberg