diff --git a/.gitignore b/.gitignore
index d99650345..dfb09c787 100644
--- a/.gitignore
+++ b/.gitignore
@@ -94,6 +94,9 @@ doc/manuals/*.pdf
 doc/manuals/*__*.png
 doc/manuals/*.check
 doc/manuals/generated/
+doc/manuals/vty/osmobts-*-vty-reference.xml
+doc/manuals/vty/osmobts-*-vty-reference.xml.inc.gen
+doc/manuals/vty/osmobts-*-vty-reference.xml.inc.merged
 doc/manuals/osmomsc-usermanual.xml
 doc/manuals/common
 doc/manuals/build
diff --git a/doc/manuals/Makefile.am b/doc/manuals/Makefile.am
index e8018d579..2fd21e6b9 100644
--- a/doc/manuals/Makefile.am
+++ b/doc/manuals/Makefile.am
@@ -18,8 +18,31 @@ if BUILD_MANUALS
   osmobts-abis.pdf: $(srcdir)/abis/*.adoc $(srcdir)/abis/*.msc
   rtp-amr.pdf: $(srcdir)/dtx.dot
 
-  VTY_REFERENCE = osmobts-vty-reference.xml
-  include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.vty-reference.inc
+  VARIANTS = $(NULL)
+
+if ENABLE_SYSMOBTS
+  VARIANTS += sysmo
+endif
+
+if ENABLE_TRX
+  VARIANTS += trx
+endif
+
+if ENABLE_OCTPHY
+  VARIANTS += octphy
+endif
+
+if ENABLE_LC15BTS
+  VARIANTS += lc15
+endif
+
+if ENABLE_OC2GBTS
+  VARIANTS += oc2g
+endif
+
+  # This is a significantly modified, multi-target adopted copy of
+  # $(OSMO_GSM_MANUALS_DIR)/build/Makefile.vty-reference.inc
+  include $(srcdir)/vty/Makefile.vty-reference.inc
 
   OSMO_REPOSITORY = osmo-bts
   include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.common.inc
diff --git a/doc/manuals/osmobts-vty-reference.xml b/doc/manuals/osmobts-vty-reference.xml
index b7c8a596f..a38eb059a 100644
--- a/doc/manuals/osmobts-vty-reference.xml
+++ b/doc/manuals/osmobts-vty-reference.xml
@@ -6,7 +6,7 @@
 <!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML 5.0//EN"
 "http://docbook.org/xml/5.0/dtd/docbook.dtd" [
 <!ENTITY chapter-vty      SYSTEM      "./common/chapters/vty.xml" >
-<!ENTITY sections-vty     SYSTEM      "generated/docbook_vty.xml"  >
+<!ENTITY sections-vty     SYSTEM      "@@GENERATED@@" >
 ]>
 
 <book>
@@ -18,12 +18,19 @@
             <authorinitials>hw</authorinitials>
             <revremark>Initial</revremark>
         </revision>
+        <revision>
+            <revnumber>v2</revnumber>
+            <date>@@REV_DATE@@</date>
+            <authorinitials>s.f.m.c.</authorinitials>
+            <revremark>Automatic build (@@REV_NUMBER@@)</revremark>
+        </revision>
     </revhistory>
 
     <title>OsmoBTS VTY Reference</title>
+    <subtitle>@@VARIANT@@</subtitle>
 
     <copyright>
-      <year>2016</year>
+      <year>@@CR_YEAR@@</year>
     </copyright>
 
     <legalnotice>
diff --git a/doc/manuals/vty/Makefile.vty-reference.inc b/doc/manuals/vty/Makefile.vty-reference.inc
new file mode 100644
index 000000000..f27506bde
--- /dev/null
+++ b/doc/manuals/vty/Makefile.vty-reference.inc
@@ -0,0 +1,37 @@
+DOCBOOKS = $(foreach v,$(VARIANTS),vty/osmobts-$(v)-vty-reference.xml)
+DOCBOOKS_DEPS = $(DOCBOOKS) $(addsuffix .inc,$(DOCBOOKS))
+INC_DIR = $(abspath $(builddir)/vty)
+
+include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.docbook.inc
+
+CLEAN_FILES += $(DOCBOOKS_DEPS)
+CLEAN_FILES += $(addsuffix .inc.gen,$(DOCBOOKS))
+CLEAN_FILES += $(addsuffix .inc.merged,$(DOCBOOKS))
+
+$(INC_DIR):
+	mkdir -p $@
+
+vty/osmobts-%-vty-reference.xml: $(top_srcdir)/src/osmo-bts-% $(INC_DIR)
+	sed -e "s|@@GENERATED@@|$@.inc|" \
+	    -e "s|@@VARIANT@@|$(notdir $<)|" \
+	    -e "s|@@REV_NUMBER@@|$(VERSION)|" \
+	    -e "s|@@REV_DATE@@|$(shell date +"%dth %B %Y")|" \
+	    -e "s|@@CR_YEAR@@|$(shell date +"%Y")|" \
+		$(srcdir)/osmobts-vty-reference.xml > $@
+
+vty/osmobts-%-vty-reference.xml.inc: $(top_builddir)/src/osmo-bts-*/osmo-bts-% \
+				     $(OSMO_GSM_MANUALS_DIR)/common/vty_additions.xml \
+				     $(OSMO_GSM_MANUALS_DIR)/common/chapters/vty.xml \
+				     $(OSMO_GSM_MANUALS_DIR)/vty_reference.xsl \
+				     $(srcdir)/vty/*.xml $(INC_DIR)
+	# a) Invoke osmo-bts-% to generate the list of commands first
+	$< --vty-ref-mode default --vty-ref-xml > "$@.gen"
+	# ... filter garbage potentially printed by libraries to stdout
+	sed -i '/^<vtydoc/,$$!d' "$@.gen"
+	# b) Merge the result of a) with global and local additions
+	$(OSMO_GSM_MANUALS_DIR)/build/vty_reference_combine.sh \
+		$(realpath $(OSMO_GSM_MANUALS_DIR)/merge_doc.xsl) "$@.gen" \
+		$(OSMO_GSM_MANUALS_DIR)/common/vty_additions.xml \
+		$(srcdir)/vty/*additions*.xml > "$@.merged"
+	# c) Convert the result of b) into a valid docbook
+	xsltproc $(OSMO_GSM_MANUALS_DIR)/vty_reference.xsl "$@.merged" > $@
diff --git a/doc/manuals/vty/bts_vty_reference.xml b/doc/manuals/vty/bts_vty_reference.xml
deleted file mode 100644
index a4c4be6d4..000000000
--- a/doc/manuals/vty/bts_vty_reference.xml
+++ /dev/null
@@ -1,2018 +0,0 @@
-<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>
-  <node id='_common_cmds_'>
-    <name>Common Commands</name>
-    <description>These commands are available on all VTY nodes. They are listed here only once, to unclutter the VTY reference.</description>
-    <command id='help'>
-      <params>
-        <param name='help' doc='Description of the interactive help system' />
-      </params>
-    </command>
-    <command id='list'>
-      <params>
-        <param name='list' doc='Print command list' />
-      </params>
-    </command>
-    <command id='write terminal'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='terminal' doc='Write to terminal' />
-      </params>
-    </command>
-    <command id='write file [PATH]'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='file' doc='Write to configuration file' />
-        <param name='[PATH]' doc='Set file path to store the config, or replace if already exists' />
-      </params>
-    </command>
-    <command id='write memory'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='memory' doc='Write configuration to the file (same as write file)' />
-      </params>
-    </command>
-    <command id='write'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-      </params>
-    </command>
-    <command id='show running-config'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='running-config' doc='running configuration' />
-      </params>
-    </command>
-    <command id='exit'>
-      <params>
-        <param name='exit' doc='Exit current mode and down to previous mode' />
-      </params>
-    </command>
-    <command id='end'>
-      <params>
-        <param name='end' doc='End current mode and change to enable mode.' />
-      </params>
-    </command>
-  </node>
-  <node id='view'>
-    <name>view</name>
-    <command id='show version'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='version' doc='Displays program version' />
-      </params>
-    </command>
-    <command id='show online-help'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='online-help' doc='Online help' />
-      </params>
-    </command>
-    <command id='enable'>
-      <params>
-        <param name='enable' doc='Turn on privileged mode command' />
-      </params>
-    </command>
-    <command id='terminal length &lt;0-512&gt;'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='length' doc='Set number of lines on a screen' />
-        <param name='&lt;0-512&gt;' doc='Number of lines on screen (0 for no pausing)' />
-      </params>
-    </command>
-    <command id='terminal no length'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='length' doc='Set number of lines on a screen' />
-      </params>
-    </command>
-    <command id='who'>
-      <params>
-        <param name='who' doc='Display who is on vty' />
-      </params>
-    </command>
-    <command id='show history'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='history' doc='Display the session command history' />
-      </params>
-    </command>
-    <command id='show e1_driver'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='e1_driver' doc='Display information about available E1 drivers' />
-      </params>
-    </command>
-    <command id='show e1_line [line_nr] [stats]'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='e1_line' doc='Display information about a E1 line' />
-        <param name='[line_nr]' doc='E1 Line Number' />
-        <param name='[stats]' doc='Include statistics' />
-      </params>
-    </command>
-    <command id='show e1_timeslot [line_nr] [ts_nr]'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='e1_timeslot' doc='Display information about a E1 timeslot' />
-        <param name='[line_nr]' doc='E1 Line Number' />
-        <param name='[ts_nr]' doc='E1 Timeslot Number' />
-      </params>
-    </command>
-    <command id='show bts &lt;0-255&gt;'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='bts' doc='Display information about a BTS' />
-        <param name='&lt;0-255&gt;' doc='BTS Number' />
-      </params>
-    </command>
-    <command id='show trx [&lt;0-255&gt;] [&lt;0-255&gt;]'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='trx' doc='Display information about a TRX' />
-        <param name='[&lt;0-255&gt;]' doc='BTS Number' />
-        <param name='[&lt;0-255&gt;]' doc='TRX Number' />
-      </params>
-    </command>
-    <command id='show timeslot [&lt;0-255&gt;] [&lt;0-255&gt;] [&lt;0-7&gt;]'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='timeslot' doc='Display information about a TS' />
-        <param name='[&lt;0-255&gt;]' doc='BTS Number' />
-        <param name='[&lt;0-255&gt;]' doc='TRX Number' />
-        <param name='[&lt;0-7&gt;]' doc='Timeslot Number' />
-      </params>
-    </command>
-    <command id='show lchan [&lt;0-255&gt;] [&lt;0-255&gt;] [&lt;0-7&gt;] [&lt;0-7&gt;]'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='lchan' doc='Display information about a logical channel' />
-        <param name='[&lt;0-255&gt;]' doc='BTS Number' />
-        <param name='[&lt;0-255&gt;]' doc='TRX Number' />
-        <param name='[&lt;0-7&gt;]' doc='Timeslot Number' />
-        <param name='[&lt;0-7&gt;]' doc='Logical Channel Number' />
-      </params>
-    </command>
-    <command id='show lchan summary [&lt;0-255&gt;] [&lt;0-255&gt;] [&lt;0-7&gt;] [&lt;0-7&gt;]'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='lchan' doc='Display information about a logical channel' />
-        <param name='summary' doc='Short summary' />
-        <param name='[&lt;0-255&gt;]' doc='BTS Number' />
-        <param name='[&lt;0-255&gt;]' doc='TRX Number' />
-        <param name='[&lt;0-7&gt;]' doc='Timeslot Number' />
-        <param name='[&lt;0-7&gt;]' doc='Logical Channel Number' />
-      </params>
-    </command>
-    <command id='logging filter l1-sapi (unknown|agch|bcch|cbch|facch/f|facch/h|fcch|idle|nch|pacch|pagch|pbcch|pch|pdtch|pnch|ppch|prach|ptcch|rach|sacch|sch|sdcch|tch/f|tch/h)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='filter' doc='Filter log messages' />
-        <param name='l1-sapi' doc='L1 SAPI' />
-        <param name='unknown' doc='UNKNOWN' />
-        <param name='agch' doc='AGCH' />
-        <param name='bcch' doc='BCCH' />
-        <param name='cbch' doc='CBCH' />
-        <param name='facch/f' doc='FACCH/F' />
-        <param name='facch/h' doc='FACCH/H' />
-        <param name='fcch' doc='FCCH' />
-        <param name='idle' doc='IDLE' />
-        <param name='nch' doc='NCH' />
-        <param name='pacch' doc='PACCH' />
-        <param name='pagch' doc='PAGCH' />
-        <param name='pbcch' doc='PBCCH' />
-        <param name='pch' doc='PCH' />
-        <param name='pdtch' doc='PDTCH' />
-        <param name='pnch' doc='PNCH' />
-        <param name='ppch' doc='PPCH' />
-        <param name='prach' doc='PRACH' />
-        <param name='ptcch' doc='PTCCH' />
-        <param name='rach' doc='RACH' />
-        <param name='sacch' doc='SACCH' />
-        <param name='sch' doc='SCH' />
-        <param name='sdcch' doc='SDCCH' />
-        <param name='tch/f' doc='TCH/F' />
-        <param name='tch/h' doc='TCH/H' />
-      </params>
-    </command>
-    <command id='no logging filter l1-sapi (unknown|agch|bcch|cbch|facch/f|facch/h|fcch|idle|nch|pacch|pagch|pbcch|pch|pdtch|pnch|ppch|prach|ptcch|rach|sacch|sch|sdcch|tch/f|tch/h)'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='logging' doc='Configure logging' />
-        <param name='filter' doc='Filter log messages' />
-        <param name='l1-sapi' doc='L1 SAPI' />
-        <param name='unknown' doc='UNKNOWN' />
-        <param name='agch' doc='AGCH' />
-        <param name='bcch' doc='BCCH' />
-        <param name='cbch' doc='CBCH' />
-        <param name='facch/f' doc='FACCH/F' />
-        <param name='facch/h' doc='FACCH/H' />
-        <param name='fcch' doc='FCCH' />
-        <param name='idle' doc='IDLE' />
-        <param name='nch' doc='NCH' />
-        <param name='pacch' doc='PACCH' />
-        <param name='pagch' doc='PAGCH' />
-        <param name='pbcch' doc='PBCCH' />
-        <param name='pch' doc='PCH' />
-        <param name='pdtch' doc='PDTCH' />
-        <param name='pnch' doc='PNCH' />
-        <param name='ppch' doc='PPCH' />
-        <param name='prach' doc='PRACH' />
-        <param name='ptcch' doc='PTCCH' />
-        <param name='rach' doc='RACH' />
-        <param name='sacch' doc='SACCH' />
-        <param name='sch' doc='SCH' />
-        <param name='sdcch' doc='SDCCH' />
-        <param name='tch/f' doc='TCH/F' />
-        <param name='tch/h' doc='TCH/H' />
-      </params>
-    </command>
-    <command id='logging enable'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='enable' doc='Enables logging to this vty' />
-      </params>
-    </command>
-    <command id='logging disable'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='disable' doc='Disables logging to this vty' />
-      </params>
-    </command>
-    <command id='logging filter all (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='filter' doc='Filter log messages' />
-        <param name='all' doc='Do you want to log all messages?' />
-        <param name='0' doc='Only print messages matched by other filters' />
-        <param name='1' doc='Bypass filter and print all messages' />
-      </params>
-    </command>
-    <command id='logging color (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='color' doc='Configure color-printing for log messages' />
-        <param name='0' doc='Don&apos;t use color for printing messages' />
-        <param name='1' doc='Use color for printing messages' />
-      </params>
-    </command>
-    <command id='logging timestamp (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='timestamp' doc='Configure log message timestamping' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with current timestamp' />
-      </params>
-    </command>
-    <command id='logging print extended-timestamp (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='extended-timestamp' doc='Configure log message timestamping' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
-      </params>
-    </command>
-    <command id='logging print category (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='category' doc='Configure log message' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with category/subsystem name' />
-      </params>
-    </command>
-    <command id='logging print category-hex (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='category-hex' doc='Configure log message' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with category/subsystem nr in hex (&apos;&lt;000b&gt;&apos;)' />
-      </params>
-    </command>
-    <command id='logging print level (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='level' doc='Configure log message' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with the log level name' />
-      </params>
-    </command>
-    <command id='logging print file (0|1|basename) [last]'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='file' doc='Configure log message' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with the source file and line' />
-        <param name='basename' doc='Prefix each log message with the source file&apos;s basename (strip leading paths) and line' />
-        <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
-      </params>
-    </command>
-    <command id='logging set-log-mask MASK'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='set-log-mask' doc='Set the logmask of this logging target' />
-        <param name='MASK' doc='List of logging categories to log, e.g. &apos;abc:mno:xyz&apos;. Available log categories depend on the specific application, refer to the &apos;logging level&apos; command. Optionally add individual log levels like &apos;abc,1:mno,3:xyz,5&apos;, where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
-      </params>
-    </command>
-    <command id='logging level (rsl|oml|rll|rr|meas|pag|l1c|l1p|dsp|pcu|ho|trx|loop|abis|rtp|sum|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='rsl' doc='A-bis Radio Siganlling Link (RSL)' />
-        <param name='oml' doc='A-bis Network Management / O&amp;M (NM/OML)' />
-        <param name='rll' doc='A-bis Radio Link Layer (RLL)' />
-        <param name='rr' doc='Layer3 Radio Resource (RR)' />
-        <param name='meas' doc='Radio Measurement Processing' />
-        <param name='pag' doc='Paging Subsystem' />
-        <param name='l1c' doc='Layer 1 Control (MPH)' />
-        <param name='l1p' doc='Layer 1 Primitives (PH)' />
-        <param name='dsp' doc='DSP Trace Messages' />
-        <param name='pcu' doc='PCU interface' />
-        <param name='ho' doc='Handover' />
-        <param name='trx' doc='TRX interface' />
-        <param name='loop' doc='Control loops' />
-        <param name='abis' doc='A-bis Intput Subsystem' />
-        <param name='rtp' doc='Realtime Transfer Protocol' />
-        <param name='sum' doc='DSUM' />
-        <param name='lglobal' doc='Library-internal global log family' />
-        <param name='llapd' doc='LAPD in libosmogsm' />
-        <param name='linp' doc='A-bis Intput Subsystem' />
-        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
-        <param name='lmi' doc='A-bis Input Driver for Signalling' />
-        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
-        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
-        <param name='lctrl' doc='Control Interface' />
-        <param name='lgtp' doc='GPRS GTP library' />
-        <param name='lstats' doc='Statistics messages and logging' />
-        <param name='lgsup' doc='Generic Subscriber Update Protocol' />
-        <param name='loap' doc='Osmocom Authentication Protocol' />
-        <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
-        <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
-        <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
-        <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
-        <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
-        <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
-        <param name='lrspro' doc='Remote SIM protocol' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='logging level set-all (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='logging level force-all (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the &apos;no logging level force-all&apos; command. Note: any &apos;logging level &lt;category&gt; &lt;level&gt;&apos; commands will have no visible effect after this, until the forced level is released.' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='no logging level force-all'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='force-all' doc='Release any globally forced log level set with &apos;logging level force-all &lt;level&gt;&apos;' />
-      </params>
-    </command>
-    <command id='logp (rsl|oml|rll|rr|meas|pag|l1c|l1p|dsp|pcu|ho|trx|loop|abis|rtp|sum|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal) .LOGMESSAGE'>
-      <params>
-        <param name='logp' doc='Print a message on all log outputs; useful for placing markers in test logs' />
-        <param name='rsl' doc='A-bis Radio Siganlling Link (RSL)' />
-        <param name='oml' doc='A-bis Network Management / O&amp;M (NM/OML)' />
-        <param name='rll' doc='A-bis Radio Link Layer (RLL)' />
-        <param name='rr' doc='Layer3 Radio Resource (RR)' />
-        <param name='meas' doc='Radio Measurement Processing' />
-        <param name='pag' doc='Paging Subsystem' />
-        <param name='l1c' doc='Layer 1 Control (MPH)' />
-        <param name='l1p' doc='Layer 1 Primitives (PH)' />
-        <param name='dsp' doc='DSP Trace Messages' />
-        <param name='pcu' doc='PCU interface' />
-        <param name='ho' doc='Handover' />
-        <param name='trx' doc='TRX interface' />
-        <param name='loop' doc='Control loops' />
-        <param name='abis' doc='A-bis Intput Subsystem' />
-        <param name='rtp' doc='Realtime Transfer Protocol' />
-        <param name='sum' doc='DSUM' />
-        <param name='lglobal' doc='Library-internal global log family' />
-        <param name='llapd' doc='LAPD in libosmogsm' />
-        <param name='linp' doc='A-bis Intput Subsystem' />
-        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
-        <param name='lmi' doc='A-bis Input Driver for Signalling' />
-        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
-        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
-        <param name='lctrl' doc='Control Interface' />
-        <param name='lgtp' doc='GPRS GTP library' />
-        <param name='lstats' doc='Statistics messages and logging' />
-        <param name='lgsup' doc='Generic Subscriber Update Protocol' />
-        <param name='loap' doc='Osmocom Authentication Protocol' />
-        <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
-        <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
-        <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
-        <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
-        <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
-        <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
-        <param name='lrspro' doc='Remote SIM protocol' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-        <param name='.LOGMESSAGE' doc='Arbitrary message to log on given category and log level' />
-      </params>
-    </command>
-    <command id='show logging vty'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='logging' doc='Show current logging configuration' />
-        <param name='vty' doc='Show current logging configuration for this vty' />
-      </params>
-    </command>
-    <command id='show alarms'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='alarms' doc='Show current logging configuration' />
-      </params>
-    </command>
-    <command id='show talloc-context (application|all) (full|brief|DEPTH)'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='talloc-context' doc='Show talloc memory hierarchy' />
-        <param name='application' doc='Application&apos;s context' />
-        <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
-        <param name='full' doc='Display a full talloc memory hierarchy' />
-        <param name='brief' doc='Display a brief talloc memory hierarchy' />
-        <param name='DEPTH' doc='Specify required maximal depth value' />
-      </params>
-    </command>
-    <command id='show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='talloc-context' doc='Show talloc memory hierarchy' />
-        <param name='application' doc='Application&apos;s context' />
-        <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
-        <param name='full' doc='Display a full talloc memory hierarchy' />
-        <param name='brief' doc='Display a brief talloc memory hierarchy' />
-        <param name='DEPTH' doc='Specify required maximal depth value' />
-        <param name='tree' doc='Display only a specific memory chunk' />
-        <param name='ADDRESS' doc='Chunk address (e.g. 0xdeadbeef)' />
-      </params>
-    </command>
-    <command id='show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='talloc-context' doc='Show talloc memory hierarchy' />
-        <param name='application' doc='Application&apos;s context' />
-        <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
-        <param name='full' doc='Display a full talloc memory hierarchy' />
-        <param name='brief' doc='Display a brief talloc memory hierarchy' />
-        <param name='DEPTH' doc='Specify required maximal depth value' />
-        <param name='filter' doc='Filter chunks using regular expression' />
-        <param name='REGEXP' doc='Regular expression' />
-      </params>
-    </command>
-    <command id='show stats'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='stats' doc='Show statistical values' />
-      </params>
-    </command>
-    <command id='show stats level (global|peer|subscriber)'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='stats' doc='Show statistical values' />
-        <param name='level' doc='Set the maximum group level' />
-        <param name='global' doc='Show global groups only' />
-        <param name='peer' doc='Show global and network peer related groups' />
-        <param name='subscriber' doc='Show global, peer, and subscriber groups' />
-      </params>
-    </command>
-    <command id='show asciidoc counters'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='asciidoc' doc='Asciidoc generation' />
-        <param name='counters' doc='Generate table of all registered counters' />
-      </params>
-    </command>
-    <command id='show rate-counters'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='rate-counters' doc='Show all rate counters' />
-      </params>
-    </command>
-  </node>
-  <node id='enable'>
-    <name>enable</name>
-    <command id='disable'>
-      <params>
-        <param name='disable' doc='Turn off privileged mode command' />
-      </params>
-    </command>
-    <command id='configure terminal'>
-      <params>
-        <param name='configure' doc='Configuration from vty interface' />
-        <param name='terminal' doc='Configuration terminal' />
-      </params>
-    </command>
-    <command id='copy running-config startup-config'>
-      <params>
-        <param name='copy' doc='Copy configuration' />
-        <param name='running-config' doc='Copy running config to... ' />
-        <param name='startup-config' doc='Copy running config to startup config (same as write file)' />
-      </params>
-    </command>
-    <command id='show startup-config'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='startup-config' doc='Contentes of startup configuration' />
-      </params>
-    </command>
-    <command id='show version'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='version' doc='Displays program version' />
-      </params>
-    </command>
-    <command id='show online-help'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='online-help' doc='Online help' />
-      </params>
-    </command>
-    <command id='terminal length &lt;0-512&gt;'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='length' doc='Set number of lines on a screen' />
-        <param name='&lt;0-512&gt;' doc='Number of lines on screen (0 for no pausing)' />
-      </params>
-    </command>
-    <command id='terminal no length'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='length' doc='Set number of lines on a screen' />
-      </params>
-    </command>
-    <command id='who'>
-      <params>
-        <param name='who' doc='Display who is on vty' />
-      </params>
-    </command>
-    <command id='show history'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='history' doc='Display the session command history' />
-      </params>
-    </command>
-    <command id='terminal monitor'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='monitor' doc='Copy debug output to the current terminal line' />
-      </params>
-    </command>
-    <command id='terminal no monitor'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='monitor' doc='Copy debug output to the current terminal line' />
-      </params>
-    </command>
-    <command id='show e1_driver'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='e1_driver' doc='Display information about available E1 drivers' />
-      </params>
-    </command>
-    <command id='show e1_line [line_nr] [stats]'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='e1_line' doc='Display information about a E1 line' />
-        <param name='[line_nr]' doc='E1 Line Number' />
-        <param name='[stats]' doc='Include statistics' />
-      </params>
-    </command>
-    <command id='show e1_timeslot [line_nr] [ts_nr]'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='e1_timeslot' doc='Display information about a E1 timeslot' />
-        <param name='[line_nr]' doc='E1 Line Number' />
-        <param name='[ts_nr]' doc='E1 Timeslot Number' />
-      </params>
-    </command>
-    <command id='show bts &lt;0-255&gt;'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='bts' doc='Display information about a BTS' />
-        <param name='&lt;0-255&gt;' doc='BTS Number' />
-      </params>
-    </command>
-    <command id='show trx [&lt;0-255&gt;] [&lt;0-255&gt;]'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='trx' doc='Display information about a TRX' />
-        <param name='[&lt;0-255&gt;]' doc='BTS Number' />
-        <param name='[&lt;0-255&gt;]' doc='TRX Number' />
-      </params>
-    </command>
-    <command id='show timeslot [&lt;0-255&gt;] [&lt;0-255&gt;] [&lt;0-7&gt;]'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='timeslot' doc='Display information about a TS' />
-        <param name='[&lt;0-255&gt;]' doc='BTS Number' />
-        <param name='[&lt;0-255&gt;]' doc='TRX Number' />
-        <param name='[&lt;0-7&gt;]' doc='Timeslot Number' />
-      </params>
-    </command>
-    <command id='show lchan [&lt;0-255&gt;] [&lt;0-255&gt;] [&lt;0-7&gt;] [&lt;0-7&gt;]'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='lchan' doc='Display information about a logical channel' />
-        <param name='[&lt;0-255&gt;]' doc='BTS Number' />
-        <param name='[&lt;0-255&gt;]' doc='TRX Number' />
-        <param name='[&lt;0-7&gt;]' doc='Timeslot Number' />
-        <param name='[&lt;0-7&gt;]' doc='Logical Channel Number' />
-      </params>
-    </command>
-    <command id='show lchan summary [&lt;0-255&gt;] [&lt;0-255&gt;] [&lt;0-7&gt;] [&lt;0-7&gt;]'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='lchan' doc='Display information about a logical channel' />
-        <param name='summary' doc='Short summary' />
-        <param name='[&lt;0-255&gt;]' doc='BTS Number' />
-        <param name='[&lt;0-255&gt;]' doc='TRX Number' />
-        <param name='[&lt;0-7&gt;]' doc='Timeslot Number' />
-        <param name='[&lt;0-7&gt;]' doc='Logical Channel Number' />
-      </params>
-    </command>
-    <command id='logging filter l1-sapi (unknown|agch|bcch|cbch|facch/f|facch/h|fcch|idle|nch|pacch|pagch|pbcch|pch|pdtch|pnch|ppch|prach|ptcch|rach|sacch|sch|sdcch|tch/f|tch/h)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='filter' doc='Filter log messages' />
-        <param name='l1-sapi' doc='L1 SAPI' />
-        <param name='unknown' doc='UNKNOWN' />
-        <param name='agch' doc='AGCH' />
-        <param name='bcch' doc='BCCH' />
-        <param name='cbch' doc='CBCH' />
-        <param name='facch/f' doc='FACCH/F' />
-        <param name='facch/h' doc='FACCH/H' />
-        <param name='fcch' doc='FCCH' />
-        <param name='idle' doc='IDLE' />
-        <param name='nch' doc='NCH' />
-        <param name='pacch' doc='PACCH' />
-        <param name='pagch' doc='PAGCH' />
-        <param name='pbcch' doc='PBCCH' />
-        <param name='pch' doc='PCH' />
-        <param name='pdtch' doc='PDTCH' />
-        <param name='pnch' doc='PNCH' />
-        <param name='ppch' doc='PPCH' />
-        <param name='prach' doc='PRACH' />
-        <param name='ptcch' doc='PTCCH' />
-        <param name='rach' doc='RACH' />
-        <param name='sacch' doc='SACCH' />
-        <param name='sch' doc='SCH' />
-        <param name='sdcch' doc='SDCCH' />
-        <param name='tch/f' doc='TCH/F' />
-        <param name='tch/h' doc='TCH/H' />
-      </params>
-    </command>
-    <command id='no logging filter l1-sapi (unknown|agch|bcch|cbch|facch/f|facch/h|fcch|idle|nch|pacch|pagch|pbcch|pch|pdtch|pnch|ppch|prach|ptcch|rach|sacch|sch|sdcch|tch/f|tch/h)'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='logging' doc='Configure logging' />
-        <param name='filter' doc='Filter log messages' />
-        <param name='l1-sapi' doc='L1 SAPI' />
-        <param name='unknown' doc='UNKNOWN' />
-        <param name='agch' doc='AGCH' />
-        <param name='bcch' doc='BCCH' />
-        <param name='cbch' doc='CBCH' />
-        <param name='facch/f' doc='FACCH/F' />
-        <param name='facch/h' doc='FACCH/H' />
-        <param name='fcch' doc='FCCH' />
-        <param name='idle' doc='IDLE' />
-        <param name='nch' doc='NCH' />
-        <param name='pacch' doc='PACCH' />
-        <param name='pagch' doc='PAGCH' />
-        <param name='pbcch' doc='PBCCH' />
-        <param name='pch' doc='PCH' />
-        <param name='pdtch' doc='PDTCH' />
-        <param name='pnch' doc='PNCH' />
-        <param name='ppch' doc='PPCH' />
-        <param name='prach' doc='PRACH' />
-        <param name='ptcch' doc='PTCCH' />
-        <param name='rach' doc='RACH' />
-        <param name='sacch' doc='SACCH' />
-        <param name='sch' doc='SCH' />
-        <param name='sdcch' doc='SDCCH' />
-        <param name='tch/f' doc='TCH/F' />
-        <param name='tch/h' doc='TCH/H' />
-      </params>
-    </command>
-    <command id='logging enable'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='enable' doc='Enables logging to this vty' />
-      </params>
-    </command>
-    <command id='logging disable'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='disable' doc='Disables logging to this vty' />
-      </params>
-    </command>
-    <command id='logging filter all (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='filter' doc='Filter log messages' />
-        <param name='all' doc='Do you want to log all messages?' />
-        <param name='0' doc='Only print messages matched by other filters' />
-        <param name='1' doc='Bypass filter and print all messages' />
-      </params>
-    </command>
-    <command id='logging color (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='color' doc='Configure color-printing for log messages' />
-        <param name='0' doc='Don&apos;t use color for printing messages' />
-        <param name='1' doc='Use color for printing messages' />
-      </params>
-    </command>
-    <command id='logging timestamp (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='timestamp' doc='Configure log message timestamping' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with current timestamp' />
-      </params>
-    </command>
-    <command id='logging print extended-timestamp (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='extended-timestamp' doc='Configure log message timestamping' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
-      </params>
-    </command>
-    <command id='logging print category (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='category' doc='Configure log message' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with category/subsystem name' />
-      </params>
-    </command>
-    <command id='logging print category-hex (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='category-hex' doc='Configure log message' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with category/subsystem nr in hex (&apos;&lt;000b&gt;&apos;)' />
-      </params>
-    </command>
-    <command id='logging print level (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='level' doc='Configure log message' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with the log level name' />
-      </params>
-    </command>
-    <command id='logging print file (0|1|basename) [last]'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='file' doc='Configure log message' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with the source file and line' />
-        <param name='basename' doc='Prefix each log message with the source file&apos;s basename (strip leading paths) and line' />
-        <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
-      </params>
-    </command>
-    <command id='logging set-log-mask MASK'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='set-log-mask' doc='Set the logmask of this logging target' />
-        <param name='MASK' doc='List of logging categories to log, e.g. &apos;abc:mno:xyz&apos;. Available log categories depend on the specific application, refer to the &apos;logging level&apos; command. Optionally add individual log levels like &apos;abc,1:mno,3:xyz,5&apos;, where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
-      </params>
-    </command>
-    <command id='logging level (rsl|oml|rll|rr|meas|pag|l1c|l1p|dsp|pcu|ho|trx|loop|abis|rtp|sum|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='rsl' doc='A-bis Radio Siganlling Link (RSL)' />
-        <param name='oml' doc='A-bis Network Management / O&amp;M (NM/OML)' />
-        <param name='rll' doc='A-bis Radio Link Layer (RLL)' />
-        <param name='rr' doc='Layer3 Radio Resource (RR)' />
-        <param name='meas' doc='Radio Measurement Processing' />
-        <param name='pag' doc='Paging Subsystem' />
-        <param name='l1c' doc='Layer 1 Control (MPH)' />
-        <param name='l1p' doc='Layer 1 Primitives (PH)' />
-        <param name='dsp' doc='DSP Trace Messages' />
-        <param name='pcu' doc='PCU interface' />
-        <param name='ho' doc='Handover' />
-        <param name='trx' doc='TRX interface' />
-        <param name='loop' doc='Control loops' />
-        <param name='abis' doc='A-bis Intput Subsystem' />
-        <param name='rtp' doc='Realtime Transfer Protocol' />
-        <param name='sum' doc='DSUM' />
-        <param name='lglobal' doc='Library-internal global log family' />
-        <param name='llapd' doc='LAPD in libosmogsm' />
-        <param name='linp' doc='A-bis Intput Subsystem' />
-        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
-        <param name='lmi' doc='A-bis Input Driver for Signalling' />
-        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
-        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
-        <param name='lctrl' doc='Control Interface' />
-        <param name='lgtp' doc='GPRS GTP library' />
-        <param name='lstats' doc='Statistics messages and logging' />
-        <param name='lgsup' doc='Generic Subscriber Update Protocol' />
-        <param name='loap' doc='Osmocom Authentication Protocol' />
-        <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
-        <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
-        <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
-        <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
-        <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
-        <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
-        <param name='lrspro' doc='Remote SIM protocol' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='logging level set-all (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='logging level force-all (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the &apos;no logging level force-all&apos; command. Note: any &apos;logging level &lt;category&gt; &lt;level&gt;&apos; commands will have no visible effect after this, until the forced level is released.' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='no logging level force-all'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='force-all' doc='Release any globally forced log level set with &apos;logging level force-all &lt;level&gt;&apos;' />
-      </params>
-    </command>
-    <command id='logp (rsl|oml|rll|rr|meas|pag|l1c|l1p|dsp|pcu|ho|trx|loop|abis|rtp|sum|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal) .LOGMESSAGE'>
-      <params>
-        <param name='logp' doc='Print a message on all log outputs; useful for placing markers in test logs' />
-        <param name='rsl' doc='A-bis Radio Siganlling Link (RSL)' />
-        <param name='oml' doc='A-bis Network Management / O&amp;M (NM/OML)' />
-        <param name='rll' doc='A-bis Radio Link Layer (RLL)' />
-        <param name='rr' doc='Layer3 Radio Resource (RR)' />
-        <param name='meas' doc='Radio Measurement Processing' />
-        <param name='pag' doc='Paging Subsystem' />
-        <param name='l1c' doc='Layer 1 Control (MPH)' />
-        <param name='l1p' doc='Layer 1 Primitives (PH)' />
-        <param name='dsp' doc='DSP Trace Messages' />
-        <param name='pcu' doc='PCU interface' />
-        <param name='ho' doc='Handover' />
-        <param name='trx' doc='TRX interface' />
-        <param name='loop' doc='Control loops' />
-        <param name='abis' doc='A-bis Intput Subsystem' />
-        <param name='rtp' doc='Realtime Transfer Protocol' />
-        <param name='sum' doc='DSUM' />
-        <param name='lglobal' doc='Library-internal global log family' />
-        <param name='llapd' doc='LAPD in libosmogsm' />
-        <param name='linp' doc='A-bis Intput Subsystem' />
-        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
-        <param name='lmi' doc='A-bis Input Driver for Signalling' />
-        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
-        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
-        <param name='lctrl' doc='Control Interface' />
-        <param name='lgtp' doc='GPRS GTP library' />
-        <param name='lstats' doc='Statistics messages and logging' />
-        <param name='lgsup' doc='Generic Subscriber Update Protocol' />
-        <param name='loap' doc='Osmocom Authentication Protocol' />
-        <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
-        <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
-        <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
-        <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
-        <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
-        <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
-        <param name='lrspro' doc='Remote SIM protocol' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-        <param name='.LOGMESSAGE' doc='Arbitrary message to log on given category and log level' />
-      </params>
-    </command>
-    <command id='show logging vty'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='logging' doc='Show current logging configuration' />
-        <param name='vty' doc='Show current logging configuration for this vty' />
-      </params>
-    </command>
-    <command id='show alarms'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='alarms' doc='Show current logging configuration' />
-      </params>
-    </command>
-    <command id='show talloc-context (application|all) (full|brief|DEPTH)'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='talloc-context' doc='Show talloc memory hierarchy' />
-        <param name='application' doc='Application&apos;s context' />
-        <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
-        <param name='full' doc='Display a full talloc memory hierarchy' />
-        <param name='brief' doc='Display a brief talloc memory hierarchy' />
-        <param name='DEPTH' doc='Specify required maximal depth value' />
-      </params>
-    </command>
-    <command id='show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='talloc-context' doc='Show talloc memory hierarchy' />
-        <param name='application' doc='Application&apos;s context' />
-        <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
-        <param name='full' doc='Display a full talloc memory hierarchy' />
-        <param name='brief' doc='Display a brief talloc memory hierarchy' />
-        <param name='DEPTH' doc='Specify required maximal depth value' />
-        <param name='tree' doc='Display only a specific memory chunk' />
-        <param name='ADDRESS' doc='Chunk address (e.g. 0xdeadbeef)' />
-      </params>
-    </command>
-    <command id='show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='talloc-context' doc='Show talloc memory hierarchy' />
-        <param name='application' doc='Application&apos;s context' />
-        <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
-        <param name='full' doc='Display a full talloc memory hierarchy' />
-        <param name='brief' doc='Display a brief talloc memory hierarchy' />
-        <param name='DEPTH' doc='Specify required maximal depth value' />
-        <param name='filter' doc='Filter chunks using regular expression' />
-        <param name='REGEXP' doc='Regular expression' />
-      </params>
-    </command>
-    <command id='show stats'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='stats' doc='Show statistical values' />
-      </params>
-    </command>
-    <command id='show stats level (global|peer|subscriber)'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='stats' doc='Show statistical values' />
-        <param name='level' doc='Set the maximum group level' />
-        <param name='global' doc='Show global groups only' />
-        <param name='peer' doc='Show global and network peer related groups' />
-        <param name='subscriber' doc='Show global, peer, and subscriber groups' />
-      </params>
-    </command>
-    <command id='show asciidoc counters'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='asciidoc' doc='Asciidoc generation' />
-        <param name='counters' doc='Generate table of all registered counters' />
-      </params>
-    </command>
-    <command id='show rate-counters'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='rate-counters' doc='Show all rate counters' />
-      </params>
-    </command>
-    <command id='bts &lt;0-0&gt; trx &lt;0-0&gt; ts &lt;0-7&gt; lchan &lt;0-1&gt; rtp jitter-buffer &lt;0-10000&gt;'>
-      <params>
-        <param name='bts' doc='BTS related commands' />
-        <param name='&lt;0-0&gt;' doc='BTS number' />
-        <param name='trx' doc='TRX related commands' />
-        <param name='&lt;0-0&gt;' doc='TRX number' />
-        <param name='ts' doc='timeslot related commands' />
-        <param name='&lt;0-7&gt;' doc='timeslot number' />
-        <param name='lchan' doc='logical channel commands' />
-        <param name='&lt;0-1&gt;' doc='logical channel number' />
-        <param name='rtp' doc='RTP settings' />
-        <param name='jitter-buffer' doc='Jitter buffer' />
-        <param name='&lt;0-10000&gt;' doc='Size of jitter buffer in (ms)' />
-      </params>
-    </command>
-    <command id='bts &lt;0-0&gt; trx &lt;0-0&gt; ts &lt;0-7&gt; lchan &lt;0-1&gt; loopback'>
-      <params>
-        <param name='bts' doc='BTS related commands' />
-        <param name='&lt;0-0&gt;' doc='BTS number' />
-        <param name='trx' doc='TRX related commands' />
-        <param name='&lt;0-0&gt;' doc='TRX number' />
-        <param name='ts' doc='timeslot related commands' />
-        <param name='&lt;0-7&gt;' doc='timeslot number' />
-        <param name='lchan' doc='logical channel commands' />
-        <param name='&lt;0-1&gt;' doc='logical channel number' />
-        <param name='loopback' doc='Set loopback' />
-      </params>
-    </command>
-    <command id='no bts &lt;0-0&gt; trx &lt;0-0&gt; ts &lt;0-7&gt; lchan &lt;0-1&gt; loopback'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='bts' doc='BTS related commands' />
-        <param name='&lt;0-0&gt;' doc='BTS number' />
-        <param name='trx' doc='TRX related commands' />
-        <param name='&lt;0-0&gt;' doc='TRX number' />
-        <param name='ts' doc='timeslot related commands' />
-        <param name='&lt;0-7&gt;' doc='timeslot number' />
-        <param name='lchan' doc='logical channel commands' />
-        <param name='&lt;0-1&gt;' doc='logical channel number' />
-        <param name='loopback' doc='Set loopback' />
-      </params>
-    </command>
-    <command id='test send-failure-event-report &lt;0-255&gt;'>
-      <params>
-        <param name='test' doc='Various testing commands' />
-        <param name='send-failure-event-report' doc='Send a test OML failure event report to the BSC' />
-        <param name='&lt;0-255&gt;' doc='BTS Number' />
-      </params>
-    </command>
-  </node>
-  <node id='config'>
-    <name>config</name>
-    <command id='hostname WORD'>
-      <params>
-        <param name='hostname' doc='Set system&apos;s network name' />
-        <param name='WORD' doc='This system&apos;s network name' />
-      </params>
-    </command>
-    <command id='no hostname [HOSTNAME]'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='hostname' doc='Reset system&apos;s network name' />
-        <param name='[HOSTNAME]' doc='Host name of this router' />
-      </params>
-    </command>
-    <command id='password (8|) WORD'>
-      <params>
-        <param name='password' doc='Assign the terminal connection password' />
-        <param name='8' doc='Specifies a HIDDEN password will follow' />
-        <param name='' doc='dummy string ' />
-        <param name='WORD' doc='The HIDDEN line password string' />
-      </params>
-    </command>
-    <command id='password LINE'>
-      <params>
-        <param name='password' doc='Assign the terminal connection password' />
-        <param name='LINE' doc='The UNENCRYPTED (cleartext) line password' />
-      </params>
-    </command>
-    <command id='enable password (8|) WORD'>
-      <params>
-        <param name='enable' doc='Modify enable password parameters' />
-        <param name='password' doc='Assign the privileged level password' />
-        <param name='8' doc='Specifies a HIDDEN password will follow' />
-        <param name='' doc='dummy string ' />
-        <param name='WORD' doc='The HIDDEN &apos;enable&apos; password string' />
-      </params>
-    </command>
-    <command id='enable password LINE'>
-      <params>
-        <param name='enable' doc='Modify enable password parameters' />
-        <param name='password' doc='Assign the privileged level password' />
-        <param name='LINE' doc='The UNENCRYPTED (cleartext) &apos;enable&apos; password' />
-      </params>
-    </command>
-    <command id='no enable password'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='enable' doc='Modify enable password parameters' />
-        <param name='password' doc='Assign the privileged level password' />
-      </params>
-    </command>
-    <command id='banner motd default'>
-      <params>
-        <param name='banner' doc='Set banner string' />
-        <param name='motd' doc='Strings for motd' />
-        <param name='default' doc='Default string' />
-      </params>
-    </command>
-    <command id='banner motd file [FILE]'>
-      <params>
-        <param name='banner' doc='Set banner' />
-        <param name='motd' doc='Banner for motd' />
-        <param name='file' doc='Banner from a file' />
-        <param name='[FILE]' doc='Filename' />
-      </params>
-    </command>
-    <command id='no banner motd'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='banner' doc='Set banner string' />
-        <param name='motd' doc='Strings for motd' />
-      </params>
-    </command>
-    <command id='service terminal-length &lt;0-512&gt;'>
-      <params>
-        <param name='service' doc='Set up miscellaneous service' />
-        <param name='terminal-length' doc='System wide terminal length configuration' />
-        <param name='&lt;0-512&gt;' doc='Number of lines of VTY (0 means no line control)' />
-      </params>
-    </command>
-    <command id='no service terminal-length [&lt;0-512&gt;]'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='service' doc='Set up miscellaneous service' />
-        <param name='terminal-length' doc='System wide terminal length configuration' />
-        <param name='[&lt;0-512&gt;]' doc='Number of lines of VTY (0 means no line control)' />
-      </params>
-    </command>
-    <command id='line vty'>
-      <params>
-        <param name='line' doc='Configure a terminal line' />
-        <param name='vty' doc='Virtual terminal' />
-      </params>
-    </command>
-    <command id='service advanced-vty'>
-      <params>
-        <param name='service' doc='Set up miscellaneous service' />
-        <param name='advanced-vty' doc='Enable advanced mode vty interface' />
-      </params>
-    </command>
-    <command id='no service advanced-vty'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='service' doc='Set up miscellaneous service' />
-        <param name='advanced-vty' doc='Enable advanced mode vty interface' />
-      </params>
-    </command>
-    <command id='show history'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='history' doc='Display the session command history' />
-      </params>
-    </command>
-    <command id='ctrl'>
-      <params>
-        <param name='ctrl' doc='Configure the Control Interface' />
-      </params>
-    </command>
-    <command id='e1_input'>
-      <params>
-        <param name='e1_input' doc='Configure E1/T1/J1 TDM input' />
-      </params>
-    </command>
-    <command id='log stderr'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='stderr' doc='Logging via STDERR of the process' />
-      </params>
-    </command>
-    <command id='no log stderr'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='stderr' doc='Logging via STDERR of the process' />
-      </params>
-    </command>
-    <command id='log file .FILENAME'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='file' doc='Logging to text file' />
-        <param name='.FILENAME' doc='Filename' />
-      </params>
-    </command>
-    <command id='no log file .FILENAME'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='file' doc='Logging to text file' />
-        <param name='.FILENAME' doc='Filename' />
-      </params>
-    </command>
-    <command id='log alarms &lt;2-32700&gt;'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='alarms' doc='Logging alarms to osmo_strrb' />
-        <param name='&lt;2-32700&gt;' doc='Maximum number of messages to log' />
-      </params>
-    </command>
-    <command id='no log alarms'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='alarms' doc='Logging alarms to osmo_strrb' />
-      </params>
-    </command>
-    <command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='syslog' doc='Logging via syslog' />
-        <param name='authpriv' doc='Security/authorization messages facility' />
-        <param name='cron' doc='Clock daemon (cron/at) facility' />
-        <param name='daemon' doc='General system daemon facility' />
-        <param name='ftp' doc='Ftp daemon facility' />
-        <param name='lpr' doc='Line printer facility' />
-        <param name='mail' doc='Mail facility' />
-        <param name='news' doc='News facility' />
-        <param name='user' doc='Generic facility' />
-        <param name='uucp' doc='UUCP facility' />
-      </params>
-    </command>
-    <command id='log syslog local &lt;0-7&gt;'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='syslog' doc='Logging via syslog' />
-        <param name='local' doc='Syslog LOCAL facility' />
-        <param name='&lt;0-7&gt;' doc='Local facility number' />
-      </params>
-    </command>
-    <command id='no log syslog'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='syslog' doc='Logging via syslog' />
-      </params>
-    </command>
-    <command id='log gsmtap [HOSTNAME]'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='gsmtap' doc='Logging via GSMTAP' />
-        <param name='[HOSTNAME]' doc='Host name to send the GSMTAP logging to (UDP port 4729)' />
-      </params>
-    </command>
-    <command id='stats reporter statsd'>
-      <params>
-        <param name='stats' doc='Configure stats sub-system' />
-        <param name='reporter' doc='Configure a stats reporter' />
-        <param name='statsd' doc='Report to a STATSD server' />
-      </params>
-    </command>
-    <command id='no stats reporter statsd'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='stats' doc='Configure stats sub-system' />
-        <param name='reporter' doc='Configure a stats reporter' />
-        <param name='statsd' doc='Report to a STATSD server' />
-      </params>
-    </command>
-    <command id='stats reporter log'>
-      <params>
-        <param name='stats' doc='Configure stats sub-system' />
-        <param name='reporter' doc='Configure a stats reporter' />
-        <param name='log' doc='Report to the logger' />
-      </params>
-    </command>
-    <command id='no stats reporter log'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='stats' doc='Configure stats sub-system' />
-        <param name='reporter' doc='Configure a stats reporter' />
-        <param name='log' doc='Report to the logger' />
-      </params>
-    </command>
-    <command id='stats interval &lt;1-65535&gt;'>
-      <params>
-        <param name='stats' doc='Configure stats sub-system' />
-        <param name='interval' doc='Set the reporting interval' />
-        <param name='&lt;1-65535&gt;' doc='Interval in seconds' />
-      </params>
-    </command>
-    <command id='bts BTS_NR'>
-      <params>
-        <param name='bts' doc='Select a BTS to configure' />
-        <param name='BTS_NR' doc='BTS Number' />
-      </params>
-    </command>
-    <command id='vty telnet-port &lt;0-65535&gt;'>
-      <params>
-        <param name='vty' doc='Configure the VTY' />
-        <param name='telnet-port' doc='Set the VTY telnet port' />
-        <param name='&lt;0-65535&gt;' doc='TCP Port number' />
-      </params>
-    </command>
-    <command id='phy &lt;0-255&gt;'>
-      <params>
-        <param name='phy' doc='Select a PHY to configure' />
-        <param name='&lt;0-255&gt;' doc='PHY number' />
-      </params>
-    </command>
-  </node>
-  <node id='config-log'>
-    <name>config-log</name>
-    <command id='logging filter all (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='filter' doc='Filter log messages' />
-        <param name='all' doc='Do you want to log all messages?' />
-        <param name='0' doc='Only print messages matched by other filters' />
-        <param name='1' doc='Bypass filter and print all messages' />
-      </params>
-    </command>
-    <command id='logging color (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='color' doc='Configure color-printing for log messages' />
-        <param name='0' doc='Don&apos;t use color for printing messages' />
-        <param name='1' doc='Use color for printing messages' />
-      </params>
-    </command>
-    <command id='logging timestamp (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='timestamp' doc='Configure log message timestamping' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with current timestamp' />
-      </params>
-    </command>
-    <command id='logging print extended-timestamp (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='extended-timestamp' doc='Configure log message timestamping' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
-      </params>
-    </command>
-    <command id='logging print category (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='category' doc='Configure log message' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with category/subsystem name' />
-      </params>
-    </command>
-    <command id='logging print category-hex (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='category-hex' doc='Configure log message' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with category/subsystem nr in hex (&apos;&lt;000b&gt;&apos;)' />
-      </params>
-    </command>
-    <command id='logging print level (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='level' doc='Configure log message' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with the log level name' />
-      </params>
-    </command>
-    <command id='logging print file (0|1|basename) [last]'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='file' doc='Configure log message' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with the source file and line' />
-        <param name='basename' doc='Prefix each log message with the source file&apos;s basename (strip leading paths) and line' />
-        <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
-      </params>
-    </command>
-    <command id='logging level (rsl|oml|rll|rr|meas|pag|l1c|l1p|dsp|pcu|ho|trx|loop|abis|rtp|sum|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='rsl' doc='A-bis Radio Siganlling Link (RSL)' />
-        <param name='oml' doc='A-bis Network Management / O&amp;M (NM/OML)' />
-        <param name='rll' doc='A-bis Radio Link Layer (RLL)' />
-        <param name='rr' doc='Layer3 Radio Resource (RR)' />
-        <param name='meas' doc='Radio Measurement Processing' />
-        <param name='pag' doc='Paging Subsystem' />
-        <param name='l1c' doc='Layer 1 Control (MPH)' />
-        <param name='l1p' doc='Layer 1 Primitives (PH)' />
-        <param name='dsp' doc='DSP Trace Messages' />
-        <param name='pcu' doc='PCU interface' />
-        <param name='ho' doc='Handover' />
-        <param name='trx' doc='TRX interface' />
-        <param name='loop' doc='Control loops' />
-        <param name='abis' doc='A-bis Intput Subsystem' />
-        <param name='rtp' doc='Realtime Transfer Protocol' />
-        <param name='sum' doc='DSUM' />
-        <param name='lglobal' doc='Library-internal global log family' />
-        <param name='llapd' doc='LAPD in libosmogsm' />
-        <param name='linp' doc='A-bis Intput Subsystem' />
-        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
-        <param name='lmi' doc='A-bis Input Driver for Signalling' />
-        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
-        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
-        <param name='lctrl' doc='Control Interface' />
-        <param name='lgtp' doc='GPRS GTP library' />
-        <param name='lstats' doc='Statistics messages and logging' />
-        <param name='lgsup' doc='Generic Subscriber Update Protocol' />
-        <param name='loap' doc='Osmocom Authentication Protocol' />
-        <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
-        <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
-        <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
-        <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
-        <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
-        <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
-        <param name='lrspro' doc='Remote SIM protocol' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='logging level set-all (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='logging level force-all (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the &apos;no logging level force-all&apos; command. Note: any &apos;logging level &lt;category&gt; &lt;level&gt;&apos; commands will have no visible effect after this, until the forced level is released.' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='no logging level force-all'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='force-all' doc='Release any globally forced log level set with &apos;logging level force-all &lt;level&gt;&apos;' />
-      </params>
-    </command>
-  </node>
-  <node id='config-stats'>
-    <name>config-stats</name>
-    <command id='local-ip ADDR'>
-      <params>
-        <param name='local-ip' doc='Set the IP address to which we bind locally' />
-        <param name='ADDR' doc='IP Address' />
-      </params>
-    </command>
-    <command id='no local-ip'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='local-ip' doc='Set the IP address to which we bind locally' />
-      </params>
-    </command>
-    <command id='remote-ip ADDR'>
-      <params>
-        <param name='remote-ip' doc='Set the remote IP address to which we connect' />
-        <param name='ADDR' doc='IP Address' />
-      </params>
-    </command>
-    <command id='remote-port &lt;1-65535&gt;'>
-      <params>
-        <param name='remote-port' doc='Set the remote port to which we connect' />
-        <param name='&lt;1-65535&gt;' doc='Remote port number' />
-      </params>
-    </command>
-    <command id='mtu &lt;100-65535&gt;'>
-      <params>
-        <param name='mtu' doc='Set the maximum packet size' />
-        <param name='&lt;100-65535&gt;' doc='Size in byte' />
-      </params>
-    </command>
-    <command id='no mtu'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='mtu' doc='Set the maximum packet size' />
-      </params>
-    </command>
-    <command id='prefix PREFIX'>
-      <params>
-        <param name='prefix' doc='Set the item name prefix' />
-        <param name='PREFIX' doc='The prefix string' />
-      </params>
-    </command>
-    <command id='no prefix'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='prefix' doc='Set the item name prefix' />
-      </params>
-    </command>
-    <command id='level (global|peer|subscriber)'>
-      <params>
-        <param name='level' doc='Set the maximum group level' />
-        <param name='global' doc='Report global groups only' />
-        <param name='peer' doc='Report global and network peer related groups' />
-        <param name='subscriber' doc='Report global, peer, and subscriber groups' />
-      </params>
-    </command>
-    <command id='enable'>
-      <params>
-        <param name='enable' doc='Enable the reporter' />
-      </params>
-    </command>
-    <command id='disable'>
-      <params>
-        <param name='disable' doc='Disable the reporter' />
-      </params>
-    </command>
-    <command id='flush-period &lt;0-65535&gt;'>
-      <params>
-        <param name='flush-period' doc='Configure stats sub-system' />
-        <param name='&lt;0-65535&gt;' doc='Send all stats even if they have not changed (i.e. force the flush)every N-th reporting interval. Set to 0 to disable regular flush (default).' />
-      </params>
-    </command>
-  </node>
-  <node id='config-line'>
-    <name>config-line</name>
-    <command id='login'>
-      <params>
-        <param name='login' doc='Enable password checking' />
-      </params>
-    </command>
-    <command id='no login'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='login' doc='Enable password checking' />
-      </params>
-    </command>
-    <command id='bind A.B.C.D [&lt;0-65535&gt;]'>
-      <params>
-        <param name='bind' doc='Accept VTY telnet connections on local interface' />
-        <param name='A.B.C.D' doc='Local interface IP address (default: 127.0.0.1)' />
-        <param name='[&lt;0-65535&gt;]' doc='Local TCP port number' />
-      </params>
-    </command>
-  </node>
-  <node id='config-e1_input'>
-    <name>config-e1_input</name>
-    <command id='pcap .FILE'>
-      <params>
-        <param name='pcap' doc='Setup a pcap recording of all E1 traffic' />
-        <param name='.FILE' doc='Filename to save the packets to' />
-      </params>
-    </command>
-    <command id='no pcap'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='pcap' doc='Disable pcap recording of all E1 traffic' />
-      </params>
-    </command>
-    <command id='e1_line &lt;0-255&gt; driver (misdn|misdn_lapd|dahdi|e1d|ipa|unixsocket)'>
-      <params>
-        <param name='e1_line' doc='Configure E1/T1/J1 Line' />
-        <param name='&lt;0-255&gt;' doc='Line Number' />
-        <param name='driver' doc='Set driver for this line' />
-        <param name='misdn' doc='mISDN supported E1 Card (kernel LAPD)' />
-        <param name='misdn_lapd' doc='mISDN supported E1 Card (userspace LAPD)' />
-        <param name='dahdi' doc='DAHDI supported E1/T1/J1 Card' />
-        <param name='e1d' doc='IPA TCP/IP input' />
-        <param name='ipa' doc='HSL TCP/IP input' />
-        <param name='unixsocket' doc='Unix socket input' />
-      </params>
-    </command>
-    <command id='e1_line &lt;0-255&gt; port &lt;0-255&gt;'>
-      <params>
-        <param name='e1_line' doc='Configure E1/T1/J1 Line' />
-        <param name='&lt;0-255&gt;' doc='Line Number' />
-        <param name='port' doc='Set physical port/span/card number' />
-        <param name='&lt;0-255&gt;' doc='E1/T1 Port/Span/Card number' />
-      </params>
-    </command>
-    <command id='e1_line &lt;0-255&gt; socket .SOCKET'>
-      <params>
-        <param name='e1_line' doc='Configure E1/T1/J1 Line' />
-        <param name='&lt;0-255&gt;' doc='Line Number' />
-        <param name='socket' doc='Set socket path for unixsocket' />
-        <param name='.SOCKET' doc='socket path' />
-      </params>
-    </command>
-    <command id='e1_line &lt;0-255&gt; name .LINE'>
-      <params>
-        <param name='e1_line' doc='Configure E1/T1/J1 Line' />
-        <param name='&lt;0-255&gt;' doc='Line Number' />
-        <param name='name' doc='Set name for this line' />
-        <param name='.LINE' doc='Human readable name' />
-      </params>
-    </command>
-    <command id='e1_line &lt;0-255&gt; keepalive'>
-      <params>
-        <param name='e1_line' doc='Configure E1/T1/J1 Line' />
-        <param name='&lt;0-255&gt;' doc='Line Number' />
-        <param name='keepalive' doc='Enable keep-alive probing' />
-      </params>
-    </command>
-    <command id='e1_line &lt;0-255&gt; keepalive &lt;1-300&gt; &lt;1-20&gt; &lt;1-300&gt;'>
-      <params>
-        <param name='e1_line' doc='Configure E1/T1/J1 Line' />
-        <param name='&lt;0-255&gt;' doc='Line Number' />
-        <param name='keepalive' doc='Enable keep-alive probing' />
-        <param name='&lt;1-300&gt;' doc='Idle interval in seconds before probes are sent' />
-        <param name='&lt;1-20&gt;' doc='Number of probes to sent' />
-        <param name='&lt;1-300&gt;' doc='Delay between probe packets in seconds' />
-      </params>
-    </command>
-    <command id='no e1_line &lt;0-255&gt; keepalive'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='e1_line' doc='Configure E1/T1/J1 Line' />
-        <param name='&lt;0-255&gt;' doc='Line Number' />
-        <param name='keepalive' doc='Enable keep-alive probing' />
-      </params>
-    </command>
-    <command id='e1_line &lt;0-255&gt; ipa-keepalive &lt;1-300&gt; &lt;1-300&gt;'>
-      <params>
-        <param name='e1_line' doc='Configure E1/T1/J1 Line' />
-        <param name='&lt;0-255&gt;' doc='Line Number' />
-        <param name='ipa-keepalive' doc='Enable IPA PING/PONG keep-alive' />
-        <param name='&lt;1-300&gt;' doc='Idle interval in seconds before probes are sent' />
-        <param name='&lt;1-300&gt;' doc='Time to wait for PONG response' />
-      </params>
-    </command>
-    <command id='no e1_line &lt;0-255&gt; ipa-keepalive'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='e1_line' doc='Configure E1/T1/J1 Line' />
-        <param name='&lt;0-255&gt;' doc='Line Number' />
-        <param name='ipa-keepalive' doc='Enable IPA PING/PONG keep-alive' />
-      </params>
-    </command>
-    <command id='ipa bind A.B.C.D'>
-      <params>
-        <param name='ipa' doc='ipa driver config' />
-        <param name='bind' doc='Set ipa local bind address' />
-        <param name='A.B.C.D' doc='Listen on this IP address (default 0.0.0.0)' />
-      </params>
-    </command>
-  </node>
-  <node id='config-ctrl'>
-    <name>config-ctrl</name>
-    <command id='bind A.B.C.D'>
-      <params>
-        <param name='bind' doc='Set bind address to listen for Control connections' />
-        <param name='A.B.C.D' doc='Local IP address (default 127.0.0.1)' />
-      </params>
-    </command>
-  </node>
-  <node id='phy'>
-    <name>phy</name>
-    <command id='instance &lt;0-255&gt;'>
-      <params>
-        <param name='instance' doc='Select a PHY instance to configure' />
-        <param name='&lt;0-255&gt;' doc='PHY Instance number' />
-      </params>
-    </command>
-    <command id='no instance &lt;0-255&gt;'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='instance' doc='Select a PHY instance to remove' />
-        <param name='&lt;0-255&gt;' doc='PHY Instance number' />
-      </params>
-    </command>
-    <command id='virtual-um ms-multicast-group GROUP'>
-      <params>
-        <param name='virtual-um' doc='Virtual Um layer' />
-        <param name='ms-multicast-group' doc='Configure the MS multicast group' />
-        <param name='GROUP' doc='(null)' />
-      </params>
-    </command>
-    <command id='virtual-um ms-udp-port &lt;0-65535&gt;'>
-      <params>
-        <param name='virtual-um' doc='Virtual Um layer' />
-        <param name='ms-udp-port' doc='Configure the MS UDP port' />
-        <param name='&lt;0-65535&gt;' doc='(null)' />
-      </params>
-    </command>
-    <command id='virtual-um bts-multicast-group GROUP'>
-      <params>
-        <param name='virtual-um' doc='Virtual Um layer' />
-        <param name='bts-multicast-group' doc='Configure the BTS multicast group' />
-        <param name='GROUP' doc='(null)' />
-      </params>
-    </command>
-    <command id='virtual-um bts-udp-port &lt;0-65535&gt;'>
-      <params>
-        <param name='virtual-um' doc='Virtual Um layer' />
-        <param name='bts-udp-port' doc='Configure the BTS UDP port' />
-        <param name='&lt;0-65535&gt;' doc='(null)' />
-      </params>
-    </command>
-    <command id='virtual-um net-device NETDEV'>
-      <params>
-        <param name='virtual-um' doc='Virtual Um layer' />
-        <param name='net-device' doc='Configure the network device' />
-        <param name='NETDEV' doc='(null)' />
-      </params>
-    </command>
-    <command id='virtual-um ttl &lt;0-255&gt;'>
-      <params>
-        <param name='virtual-um' doc='Virtual Um layer' />
-        <param name='ttl' doc='Configure the TTL for transmitted multicast GSMTAP packets' />
-        <param name='&lt;0-255&gt;' doc='(null)' />
-      </params>
-    </command>
-  </node>
-  <node id='phy-inst'>
-    <name>phy-inst</name>
-  </node>
-  <node id='bts'>
-    <name>bts</name>
-    <command id='ipa unit-id &lt;0-65534&gt; &lt;0-255&gt;'>
-      <params>
-        <param name='ipa' doc='ip.access RSL commands' />
-        <param name='unit-id' doc='Set the Unit ID of this BTS' />
-        <param name='&lt;0-65534&gt;' doc='Site ID' />
-        <param name='&lt;0-255&gt;' doc='Unit ID' />
-      </params>
-    </command>
-    <command id='oml remote-ip A.B.C.D'>
-      <params>
-        <param name='oml' doc='OML Parameters' />
-        <param name='remote-ip' doc='OML IP Address' />
-        <param name='A.B.C.D' doc='OML IP Address' />
-      </params>
-    </command>
-    <command id='rtp jitter-buffer &lt;0-10000&gt; [adaptive]'>
-      <params>
-        <param name='rtp' doc='RTP parameters' />
-        <param name='jitter-buffer' doc='RTP jitter buffer' />
-        <param name='&lt;0-10000&gt;' doc='jitter buffer in ms' />
-        <param name='[adaptive]' doc='(null)' />
-      </params>
-    </command>
-    <command id='rtp port-range &lt;1-65534&gt; &lt;1-65534&gt;'>
-      <params>
-        <param name='rtp' doc='RTP parameters' />
-        <param name='port-range' doc='Range of local ports to use for RTP/RTCP traffic' />
-        <param name='&lt;1-65534&gt;' doc='(null)' />
-        <param name='&lt;1-65534&gt;' doc='(null)' />
-      </params>
-    </command>
-    <command id='rtp ip-dscp &lt;0-63&gt;'>
-      <params>
-        <param name='rtp' doc='RTP parameters' />
-        <param name='ip-dscp' doc='Specify DSCP for RTP/IP packets' />
-        <param name='&lt;0-63&gt;' doc='The DSCP value (upper 6 bits of TOS)' />
-      </params>
-    </command>
-    <command id='band (450|GSM450|480|GSM480|750|GSM750|810|GSM810|850|GSM850|900|GSM900|1800|DCS1800|1900|PCS1900)'>
-      <params>
-        <param name='band' doc='Set the frequency band of this BTS' />
-        <param name='450' doc='Alias for GSM450' />
-        <param name='GSM450' doc='450Mhz' />
-        <param name='480' doc='Alias for GSM480' />
-        <param name='GSM480' doc='480Mhz' />
-        <param name='750' doc='Alias for GSM750' />
-        <param name='GSM750' doc='750Mhz' />
-        <param name='810' doc='Alias for GSM810' />
-        <param name='GSM810' doc='810Mhz' />
-        <param name='850' doc='Alias for GSM850' />
-        <param name='GSM850' doc='850Mhz' />
-        <param name='900' doc='Alias for GSM900' />
-        <param name='GSM900' doc='900Mhz' />
-        <param name='1800' doc='Alias for DCS1800' />
-        <param name='DCS1800' doc='1800Mhz' />
-        <param name='1900' doc='Alias for PCS1900' />
-        <param name='PCS1900' doc='1900Mhz' />
-      </params>
-    </command>
-    <command id='description .TEXT'>
-      <params>
-        <param name='description' doc='Save human-readable description of the object' />
-        <param name='.TEXT' doc='Text until the end of the line' />
-      </params>
-    </command>
-    <command id='no description'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='description' doc='Remove description of the object' />
-      </params>
-    </command>
-    <command id='paging queue-size &lt;1-1024&gt;'>
-      <params>
-        <param name='paging' doc='Paging related parameters' />
-        <param name='queue-size' doc='Maximum length of BTS-internal paging queue' />
-        <param name='&lt;1-1024&gt;' doc='Maximum length of BTS-internal paging queue' />
-      </params>
-    </command>
-    <command id='paging lifetime &lt;0-60&gt;'>
-      <params>
-        <param name='paging' doc='Paging related parameters' />
-        <param name='lifetime' doc='Maximum lifetime of a paging record' />
-        <param name='&lt;0-60&gt;' doc='Maximum lifetime of a paging record (secods)' />
-      </params>
-    </command>
-    <command id='agch-queue-mgmt default'>
-      <params>
-        <param name='agch-queue-mgmt' doc='AGCH queue mgmt' />
-        <param name='default' doc='Reset clean parameters to default values' />
-      </params>
-    </command>
-    <command id='agch-queue-mgmt threshold &lt;0-100&gt; low &lt;0-100&gt; high &lt;0-100000&gt;'>
-      <params>
-        <param name='agch-queue-mgmt' doc='AGCH queue mgmt' />
-        <param name='threshold' doc='Threshold to start cleanup' />
-        <param name='&lt;0-100&gt;' doc='in %% of the maximum queue length' />
-        <param name='low' doc='Low water mark for cleanup' />
-        <param name='&lt;0-100&gt;' doc='in %% of the maximum queue length' />
-        <param name='high' doc='High water mark for cleanup' />
-        <param name='&lt;0-100000&gt;' doc='in %% of the maximum queue length' />
-      </params>
-    </command>
-    <command id='uplink-power-target &lt;-110-0&gt;'>
-      <params>
-        <param name='uplink-power-target' doc='Set the nominal target Rx Level for uplink power control loop' />
-        <param name='&lt;-110-0&gt;' doc='Target uplink Rx level in dBm' />
-      </params>
-    </command>
-    <command id='min-qual-rach &lt;-100-100&gt;'>
-      <params>
-        <param name='min-qual-rach' doc='Set the minimum link quality level of Access Bursts to be accepted' />
-        <param name='&lt;-100-100&gt;' doc='C/I (Carrier-to-Interference) ratio in centiBels (10e-2 B or 10e-1 dB)' />
-      </params>
-    </command>
-    <command id='min-qual-norm &lt;-100-100&gt;'>
-      <params>
-        <param name='min-qual-norm' doc='Set the minimum link quality level of Normal Bursts to be accepted' />
-        <param name='&lt;-100-100&gt;' doc='C/I (Carrier-to-Interference) ratio in centiBels (10e-2 B or 10e-1 dB)' />
-      </params>
-    </command>
-    <command id='max-ber10k-rach &lt;0-10000&gt;'>
-      <params>
-        <param name='max-ber10k-rach' doc='Set the maximum BER for valid RACH requests' />
-        <param name='&lt;0-10000&gt;' doc='BER in 1/10000 units (0=no BER; 100=1% BER)' />
-      </params>
-    </command>
-    <command id='pcu-socket PATH'>
-      <params>
-        <param name='pcu-socket' doc='Configure the PCU socket file/path name' />
-        <param name='PATH' doc='(null)' />
-      </params>
-    </command>
-    <command id='supp-meas-info toa256'>
-      <params>
-        <param name='supp-meas-info' doc='Configure the RSL Supplementary Measurement Info' />
-        <param name='toa256' doc='Report the TOA in 1/256th symbol periods' />
-      </params>
-    </command>
-    <command id='no supp-meas-info toa256'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='supp-meas-info' doc='Configure the RSL Supplementary Measurement Info' />
-        <param name='toa256' doc='Report the TOA in 1/256th symbol periods' />
-      </params>
-    </command>
-    <command id='smscb queue-max-length &lt;1-60&gt;'>
-      <params>
-        <param name='smscb' doc='Maximum queue length for SMSCB (CBCH) queue. In count of messages/pages (Default: 15)' />
-        <param name='queue-max-length' doc='(null)' />
-        <param name='&lt;1-60&gt;' doc='(null)' />
-      </params>
-    </command>
-    <command id='smscb queue-target-length &lt;1-30&gt;'>
-      <params>
-        <param name='smscb' doc='Target queue length for SMSCB (CBCH) queue. In count of messages/pages (Default: 2)' />
-        <param name='queue-target-length' doc='(null)' />
-        <param name='&lt;1-30&gt;' doc='(null)' />
-      </params>
-    </command>
-    <command id='smscb queue-hysteresis &lt;0-30&gt;'>
-      <params>
-        <param name='smscb' doc='Hysteresis for SMSCB (CBCH) queue. In count of messages/pages (Default: 2)' />
-        <param name='queue-hysteresis' doc='(null)' />
-        <param name='&lt;0-30&gt;' doc='(null)' />
-      </params>
-    </command>
-    <command id='gsmtap-sapi (bcch|ccch|rach|agch|pch|sdcch|tch/f|tch/h|pacch|pdtch|ptcch|cbch|sacch)'>
-      <params>
-        <param name='gsmtap-sapi' doc='GSMTAP SAPI' />
-        <param name='bcch' doc='BCCH' />
-        <param name='ccch' doc='CCCH' />
-        <param name='rach' doc='RACH' />
-        <param name='agch' doc='AGCH' />
-        <param name='pch' doc='PCH' />
-        <param name='sdcch' doc='SDCCH' />
-        <param name='tch/f' doc='TCH/F' />
-        <param name='tch/h' doc='TCH/H' />
-        <param name='pacch' doc='PACCH' />
-        <param name='pdtch' doc='PDTCH' />
-        <param name='ptcch' doc='PTCCH' />
-        <param name='cbch' doc='CBCH' />
-        <param name='sacch' doc='SACCH' />
-      </params>
-    </command>
-    <command id='no gsmtap-sapi (bcch|ccch|rach|agch|pch|sdcch|tch/f|tch/h|pacch|pdtch|ptcch|cbch|sacch)'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='gsmtap-sapi' doc='GSMTAP SAPI' />
-        <param name='bcch' doc='BCCH' />
-        <param name='ccch' doc='CCCH' />
-        <param name='rach' doc='RACH' />
-        <param name='agch' doc='AGCH' />
-        <param name='pch' doc='PCH' />
-        <param name='sdcch' doc='SDCCH' />
-        <param name='tch/f' doc='TCH/F' />
-        <param name='tch/h' doc='TCH/H' />
-        <param name='pacch' doc='PACCH' />
-        <param name='pdtch' doc='PDTCH' />
-        <param name='ptcch' doc='PTCCH' />
-        <param name='cbch' doc='CBCH' />
-        <param name='sacch' doc='SACCH' />
-      </params>
-    </command>
-    <command id='trx &lt;0-254&gt;'>
-      <params>
-        <param name='trx' doc='Select a TRX to configure' />
-        <param name='&lt;0-254&gt;' doc='TRX number' />
-      </params>
-    </command>
-  </node>
-  <node id='trx'>
-    <name>trx</name>
-    <command id='user-gain &lt;-100000-100000&gt; (dB|mdB)'>
-      <params>
-        <param name='user-gain' doc='Inform BTS about additional, user-provided gain or attenuation at TRX output' />
-        <param name='&lt;-100000-100000&gt;' doc='Value of user-provided external gain(+)/attenuation(-)' />
-        <param name='dB' doc='Unit is dB (decibels)' />
-        <param name='mdB' doc='Unit is mdB (milli-decibels, or rather 1/10000 bel)' />
-      </params>
-    </command>
-    <command id='power-ramp max-initial &lt;0-100000&gt; (dBm|mdBm)'>
-      <params>
-        <param name='power-ramp' doc='Power-Ramp settingsMaximum initial power' />
-        <param name='max-initial' doc='Value' />
-        <param name='&lt;0-100000&gt;' doc='Unit is dB (decibels)' />
-        <param name='dBm' doc='Unit is mdB (milli-decibels, or rather 1/10000 bel)' />
-        <param name='mdBm' doc='(null)' />
-      </params>
-    </command>
-    <command id='power-ramp step-size &lt;1-100000&gt; (dB|mdB)'>
-      <params>
-        <param name='power-ramp' doc='Power-Ramp settingsPower increase by step' />
-        <param name='step-size' doc='Step size' />
-        <param name='&lt;1-100000&gt;' doc='Unit is dB (decibels)' />
-        <param name='dB' doc='Unit is mdB (milli-decibels, or rather 1/10000 bel)' />
-        <param name='mdB' doc='(null)' />
-      </params>
-    </command>
-    <command id='power-ramp step-interval &lt;1-100&gt;'>
-      <params>
-        <param name='power-ramp' doc='Power-Ramp settingsPower increase by step' />
-        <param name='step-interval' doc='Step time in seconds' />
-        <param name='&lt;1-100&gt;' doc='(null)' />
-      </params>
-    </command>
-    <command id='ms-power-control (dsp|osmo)'>
-      <params>
-        <param name='ms-power-control' doc='Mobile Station Power Level Control (change requires restart)' />
-        <param name='dsp' doc='Handled by DSP' />
-        <param name='osmo' doc='Handled by OsmoBTS' />
-      </params>
-    </command>
-    <command id='phy &lt;0-255&gt; instance &lt;0-255&gt;'>
-      <params>
-        <param name='phy' doc='Configure PHY Link+Instance for this TRX' />
-        <param name='&lt;0-255&gt;' doc='PHY Link number' />
-        <param name='instance' doc='PHY instance' />
-        <param name='&lt;0-255&gt;' doc='PHY Instance number' />
-      </params>
-    </command>
-  </node>
-</vtydoc>