Bump version: 1.2.0.444-8777-dirty → 1.3.0
Change-Id: I206af3596a714e5e9038b22e84ae6c20dc360e13
This commit is contained in:
parent
8777b63ef8
commit
0436fe7fca
|
|
@ -1,2 +0,0 @@
|
|||
* update osmo-gsm-manuals dependency to > 0.3.0 for vty_cpu_sched.adoc include.
|
||||
* update libosmocore dependency for osmo_fd_{read,write}_{enable,disable}()
|
||||
16
configure.ac
16
configure.ac
|
|
@ -69,14 +69,14 @@ then
|
|||
fi
|
||||
|
||||
dnl checks for libraries
|
||||
PKG_CHECK_MODULES(LIBOSMOCORE, libosmocore >= 1.4.0)
|
||||
PKG_CHECK_MODULES(LIBOSMOVTY, libosmovty >= 1.4.0)
|
||||
PKG_CHECK_MODULES(LIBOSMOGSM, libosmogsm >= 1.4.0)
|
||||
PKG_CHECK_MODULES(LIBOSMOCTRL, libosmoctrl >= 1.4.0)
|
||||
PKG_CHECK_MODULES(LIBOSMOCODEC, libosmocodec >= 1.4.0)
|
||||
PKG_CHECK_MODULES(LIBOSMOCODING, libosmocoding >= 1.4.0)
|
||||
PKG_CHECK_MODULES(LIBOSMOABIS, libosmoabis >= 0.6.0)
|
||||
PKG_CHECK_MODULES(LIBOSMOTRAU, libosmotrau >= 0.6.0)
|
||||
PKG_CHECK_MODULES(LIBOSMOCORE, libosmocore >= 1.5.0)
|
||||
PKG_CHECK_MODULES(LIBOSMOVTY, libosmovty >= 1.5.0)
|
||||
PKG_CHECK_MODULES(LIBOSMOGSM, libosmogsm >= 1.5.0)
|
||||
PKG_CHECK_MODULES(LIBOSMOCTRL, libosmoctrl >= 1.5.0)
|
||||
PKG_CHECK_MODULES(LIBOSMOCODEC, libosmocodec >= 1.5.0)
|
||||
PKG_CHECK_MODULES(LIBOSMOCODING, libosmocoding >= 1.5.0)
|
||||
PKG_CHECK_MODULES(LIBOSMOABIS, libosmoabis >= 1.1.0)
|
||||
PKG_CHECK_MODULES(LIBOSMOTRAU, libosmotrau >= 1.1.0)
|
||||
|
||||
AC_MSG_CHECKING([whether to enable support for sysmobts calibration tool])
|
||||
AC_ARG_ENABLE(sysmobts-calib,
|
||||
|
|
|
|||
|
|
@ -27,14 +27,14 @@ BuildRequires: pkgconfig >= 0.20
|
|||
%if 0%{?suse_version}
|
||||
BuildRequires: systemd-rpm-macros
|
||||
%endif
|
||||
BuildRequires: pkgconfig(libosmoabis) >= 0.6.0
|
||||
BuildRequires: pkgconfig(libosmocodec) >= 1.2.0
|
||||
BuildRequires: pkgconfig(libosmocoding) >= 1.2.0
|
||||
BuildRequires: pkgconfig(libosmocore) >= 1.2.0
|
||||
BuildRequires: pkgconfig(libosmoctrl) >= 1.2.0
|
||||
BuildRequires: pkgconfig(libosmogsm) >= 1.2.0
|
||||
BuildRequires: pkgconfig(libosmotrau) >= 0.6.0
|
||||
BuildRequires: pkgconfig(libosmovty) >= 1.2.0
|
||||
BuildRequires: pkgconfig(libosmoabis) >= 1.1.0
|
||||
BuildRequires: pkgconfig(libosmocodec) >= 1.5.0
|
||||
BuildRequires: pkgconfig(libosmocoding) >= 1.5.0
|
||||
BuildRequires: pkgconfig(libosmocore) >= 1.5.0
|
||||
BuildRequires: pkgconfig(libosmoctrl) >= 1.5.0
|
||||
BuildRequires: pkgconfig(libosmogsm) >= 1.5.0
|
||||
BuildRequires: pkgconfig(libosmotrau) >= 1.1.0
|
||||
BuildRequires: pkgconfig(libosmovty) >= 1.5.0
|
||||
### FIXME: DependencyHACK to include osmocom/gprs/protocol/gsm_04_60.h
|
||||
BuildRequires: pkgconfig(libosmogb)
|
||||
%{?systemd_requires}
|
||||
|
|
|
|||
|
|
@ -1,3 +1,475 @@
|
|||
osmo-bts (1.3.0) unstable; urgency=medium
|
||||
|
||||
[ Michael McTernan ]
|
||||
* measurement: use signed integer for division of ta256b_sum
|
||||
|
||||
[ Vadim Yanitskiy ]
|
||||
* common/vty.c: get rid of generic exit / end commands
|
||||
* common/abis.c: make use of RSL TEI from OML IPA RSL Connect
|
||||
* L1SAP: use LOGL_DEBUG for logging from rach_pass_filter()
|
||||
* osmo-bts-sysmo/Makefile.am: fix: do not overwrite bin_PROGRAMS
|
||||
* vty: fix left shift by 31 cannot be represented in type 'int'
|
||||
* common/sysinfo: reduce criticality of a logging message
|
||||
* osmo-bts-virtual: fix wrong endianness in gsmtap_hdr_stringify()
|
||||
* osmo-bts-virtual: do not print redundant info in tx_to_virt_um()
|
||||
* osmo-bts-virtual: do not log GSMTAP message sending failure twice
|
||||
* l1sap: fix gsmtap_ph_rach(): properly pack 8-bit and 11-bit RA
|
||||
* osmo-bts-{sysmo,oc2g,lc15}: fix segfault on 'dsp-trace-flag'
|
||||
* osmo-bts-trx/scheduler: remove a left-over from UL TCH handlers
|
||||
* oml: fix oml_mo_tx_sw_act_rep(): do not allocate FOM header twice
|
||||
* fix typo in osmo_bts_variant_names: s/omso/osmo/g
|
||||
* doc/manuals: fix typo in interfaces.adoc: s/Omsocom/Osmocom/g
|
||||
* osmo-bts-omldummy: print a brief usage statement if argc < 3
|
||||
* osmo-bts-omldummy: make number of transceivers configurable
|
||||
* vty: get rid of unused ournode_{exit,end}_cmd declarations
|
||||
* vty: cosmetic: make an error message more informative
|
||||
* vty: use gsm48_chan_mode_name() from libosmocore
|
||||
* gsm_data_shared: drop unused supports_egprs_11bit_rach
|
||||
* gsm_data_shared: drop unused enum bts_gprs_mode
|
||||
* gsm_data_shared: drop unused channel request reason definitions
|
||||
* gsm_data_shared: get rid of unused HARDCODED_{ARFCN,BSIC}
|
||||
* gsm_data_shared: get rid of unused HARDCODED_BTS{0,1,2}_TS
|
||||
* gsm_data_shared: get rid of unused enum gsm_hooks
|
||||
* gsm_data_shared: drop declaration of non-existing gsm_parse_reg()
|
||||
* gsm_data_shared: drop unused A38_XOR_{MIN,MAX,COMP128}_KEY_LEN
|
||||
* gsm_data_shared: drop unused MAX_EARFCN_LIST
|
||||
* gsm_data_shared: drop unused LCHAN_SAPI_{UNUSED,MS,NET,REL}
|
||||
* gsm_data_shared: drop unused struct bts_codec_conf
|
||||
* gsm_data_shared: drop meaningless comments
|
||||
* gsm_data_shared: drop unused sacch_deact from struct gsm_lchan
|
||||
* gsm_data_shared: drop forward declaration of struct vty
|
||||
* gsm_data_shared: drop unused *nmh from struct gsm_bts
|
||||
* gsm_data_shared: drop unused dtxu from struct gsm_bts
|
||||
* gsm_data_shared: drop unused ctrl_ack_type_use_block & net_ctrl_ord
|
||||
* gsm_data_shared: drop unused rach_b_thresh & rach_ldavg_slots
|
||||
* gsm_data_shared: drop force_combined_si & bcch_change_mark
|
||||
* scheduler: drop non-existing extern declarations
|
||||
* vty: fix bts_dump_vty(): properly print OML stream ID (TEI)
|
||||
* rsl: refactor handling of RSL_IE_MR_CONFIG
|
||||
* osmo-bts-trx: prettify Makefile.am: make it git friendly
|
||||
* osmo-bts-trx: fix: use noinst_HEADERS instead of EXTRA_DIST
|
||||
* osmo-bts-virtual: cosmetic: use LID_{SACCH,DEDIC} macros
|
||||
* doc/examples: remove virtual/openbsc-virtual.cfg
|
||||
* common/scheduler: fix unreachable code in trx_sched_set_lchan()
|
||||
* common/scheduler: use boolean for channel activation state
|
||||
* osmo-bts-trx/trx_if: fix memleak in trx_ctrl_cmd_cb()
|
||||
* osmo-bts-trx/trx_if: cosmetic: s/ocommand/command/
|
||||
* oml: fix TL16V length calculation in add_bts_feat()
|
||||
* osmo-bts-trx: indicate BTS_FEAT_EGPRS support to BSC
|
||||
* gsm_data_shared: use bitvec API to allocate the feature vector
|
||||
* Do not mix public and private BTS features, use libosmocore's API
|
||||
* osmo-bts-trx/scheduler: properly handle NOPE.ind during handover
|
||||
* osmo-bts-trx: use osmo_store32be() in trx_if_send_burst()
|
||||
* osmo-bts-trx: move logical channel handlers to separate files
|
||||
* osmo-bts-trx: introduce and use struct trx_dl_burst_req
|
||||
* osmo-bts-trx: store pointer to gsm_lchan in l1sched_chan_state
|
||||
* osmo-bts-trx: include BS Power reduction in Downlink bursts
|
||||
* A-bis/RSL: refactor handling of BS Power IE (power reduction)
|
||||
* A-bis/OML: fix logging: do not print A-bis MO name twice
|
||||
* Use libosmocore's TDMA frame number API (constatns & arithmetic)
|
||||
* osmo-bts-trx: fix trx_sched_fn(): properly advance frame number
|
||||
* osmo-bts-trx/scheduler: make mark trx_sched_fn() return void
|
||||
* vty: fix missing separator in help for power ramp commands
|
||||
* osmo-bts-trx/scheduler: get rid of _sched_fcch_burst
|
||||
* A-bis/OML: handle hopping params in Set Channel Attributes
|
||||
* osmo-bts-trx/scheduler: cosmetic: move trx_if_powered() check
|
||||
* osmo-bts-trx/scheduler: get rid of unused 'meas' in l1sched_chan_state
|
||||
* l1sap: do not print redundant info in l1sap_chan_act()
|
||||
* Constify the 'trx' argument of trx_get_hlayer1() everywhere
|
||||
* common: constify the argument of trx_ms_pwr_ctrl_is_osmo()
|
||||
* pcu_sock: constify the argument of ts_should_be_pdch()
|
||||
* osmo-bts-trx/scheduler: fix CLCK.ind handling during ramping down
|
||||
* osmo-bts-trx/scheduler: refactor dummy burst scheduling
|
||||
* oml: fix ARFCN range check in oml_rx_set_radio_attr()
|
||||
* oml: fix ARFCN range check in oml_rx_set_bts_attr()
|
||||
* pcu_sock: use a 'switch' statement in ts_should_be_pdch()
|
||||
* pcu_sock: warn about maximum transceiver number constraints
|
||||
* pcu_sock: separate trx / ts filling from pcu_tx_info_ind()
|
||||
* pcu_sock: use LOGPTRX() in info_ind_fill_trx()
|
||||
* osmo-bts-trx/scheduler: implement baseband frequency hopping
|
||||
* osmo-bts-trx: indicate support of BTS_FEAT_HOPPING
|
||||
* l1sap: radio_link_timeout(): clarify logging messages
|
||||
* l1sap: radio_link_timeout(): use LOGPLCHAN() macro
|
||||
* l1sap: radio_link_timeout(): bad_frame is a boolean
|
||||
* rsl: constify the 'lchan' argument of rsl_tx_conn_fail()
|
||||
* debian/control: change maintainer to the Osmocom team / mailing list
|
||||
* osmo-bts-omldummy: enable BTS_FEAT_{CBCH,HOPPING} support
|
||||
* vty: clarify documentation of '[no] gsmtap-sapi' command
|
||||
* vty: add 'gsmtap-sapi (enable-all|disable-all)' command
|
||||
* osmo-bts-trx/trx_provision_fsm: fix misleading comment in header
|
||||
* osmo-bts-trx/trx_provision_fsm: cosmetic: switch is not a function
|
||||
* osmo-bts-trx/l1_if: drop redundant logging message
|
||||
* osmo-bts-trx: fix trx_init(): do not send OPSTART ACK blindly
|
||||
* osmo-bts-trx/trx_provision_fsm: add missing default labels
|
||||
* osmo-bts-trx: also print 'txtune-ack' in st_open_poweroff()
|
||||
* struct gsm_bts_trx: remove unused per-TRX OML Link pointer
|
||||
* struct gsm_bts_trx[_ts]: remove unused parsed NM attribute list
|
||||
* gsm_data: rename hopping.{ma,ma_len} to hopping.arfcn_{list,num}
|
||||
* pcuif_proto: version 10: add frequency hopping parameters
|
||||
* osmo-bts-trx/scheduler: refactor UL burst measurement processing
|
||||
* vty: fix bts_dump_vty_features(): properly check BTS model flags
|
||||
* bts: cosmetic: make param 'net' of gsm_bts_num() const
|
||||
* vty: cosmetic: use osmo_talloc_replace_string()
|
||||
* tx_power: make trx/lchan struct pointers const where possible
|
||||
* vty: make most struct pointers const in show/write commands
|
||||
* osmo-bts-omldummy: fix: do not crash on OML connection drop/failure
|
||||
* osmo-bts-omldummy: suppress 'Unimplemented bts_model_trx_deact_rf'
|
||||
* vty: fix 'show bts' command: print proper BTS variant
|
||||
* vty: fix 'show bts' command: BTS number is optional
|
||||
* pcu_sock: cosmetic: use ARRAY_SIZE() in pcu_tx_info_ind()
|
||||
* pcu_sock: cosmetic: make *nsvc a scoped and const variable
|
||||
* pcu_sock: use llist_for_each_entry() in pcu_sock_close()
|
||||
* pcu_sock: fix pcu_sock_close(): deactivate dynamic timeslots too
|
||||
* oml: fix handling of NSVC local port in oml_ipa_mo_set_attr_nsvc()
|
||||
* pcu_sock: fix {local,remote}_port byte ordering in pcu_tx_info_ind()
|
||||
* pcu_sock: support handling multiple BTS instances in pcu_rx()
|
||||
* gsm_data: check in and use enum lchan_rel_act_kind
|
||||
* tests/power_test: also match stderr, not only stdout
|
||||
* tests/power_test: move bts/trx/ts/lchan init to init_test()
|
||||
* tests/power_test: do not assert in apply_power_test()
|
||||
* power_control: clarify argument names of lchan_ms_pwr_ctrl()
|
||||
* power_control: implement EWMA based Uplink power filtering
|
||||
* fix pcu_if_signal_cb(): do not send INFO.ind if PCU is not connected
|
||||
* scheduler: ensure PRIM_OP_REQUEST when adding to the queue
|
||||
* scheduler: _sched_dequeue_prim(): make 'l1sap' a scoped pointer
|
||||
* scheduler: use RSL_CHAN_NR_MASK in trx_sched_set_lchan()
|
||||
* measurement: remove redundant 'break' statements in modulus_by_lchan()
|
||||
* measurement: use LOGPLCHAN() macro in lchan_meas_check_compute()
|
||||
* power_test: fix incorrect line termination in init_test()
|
||||
* power_control: do nothing if 'rx-current' equals 'rx-target'
|
||||
* power_control: tolerate small deviations from 'rx-target'
|
||||
* scheduler: use RSL_CHAN_NR_MASK in trx_sched_set_cipher()
|
||||
* scheduler: drop meaningless check in trx_sched_set_lchan()
|
||||
* scheduler: drop redundant check in trx_sched_set_cipher()
|
||||
* scheduler: get rid of useless TRX_CHAN_FLAG_PDCH
|
||||
* scheduler: reduce nesting in trx_sched_set_lchan()
|
||||
* scheduler: treat subsequent lchan (de)activation as error
|
||||
* scheduler: join conditions in trx_sched_set_lchan()
|
||||
* scheduler: remove pending Tx prims on lchan deactivation
|
||||
* power_control: fix default EWMA smoothing coefficient (80% -> 50%)
|
||||
* main: do not print deprecated '-r' / '--realtime' in help
|
||||
* main: increase spacing between commands and description
|
||||
* main: separate model-specific arguments in help
|
||||
* main: add --vty-ref-mode, use vty_dump_xml_ref_mode()
|
||||
* osmo-bts-trx/scheduler: fix comments related to FACCH/H and BFI
|
||||
* main: register VTY commands before handle_options()
|
||||
* main: move general options from bts_vty_init()
|
||||
* vty: fix double '%' in description of some commands
|
||||
* vty: fix missing / wrong documentation for some commands
|
||||
* vty: call bts_model_vty_init() from bts_vty_init()
|
||||
* fixup: vty: call bts_model_vty_init() from bts_vty_init()
|
||||
* main: do not print asciiart to stdout, use stderr instead
|
||||
* osmo-bts-lc15: use consistent name for containing directory
|
||||
* doc/manuals: generate XML VTY reference at build-time
|
||||
* doc/manuals: also generate VTY reference for osmo-bts-virtual
|
||||
* doc/manuals: move osmobts-vty-reference.xml to vty/
|
||||
* osmo-bts-trx/scheduler: ensure no DL power attenuation on C0
|
||||
* struct gsm_bts: move ul_power_{target,hysteresis} to ul_power_ctrl
|
||||
* bts: rename MS_UL_PF_ALGO_{NONE,EWMA} to BTS_PF_ALGO_{NONE,EWMA}
|
||||
* bts: generalize a struct for UL/DL power control parameters
|
||||
* bts: add Downlink power control parameters
|
||||
* l1sap: make sure that UL SACCH is always 23 octets long
|
||||
* tests/power: rename s/power_test/ms_power_loop_test/
|
||||
* power_control: generalize power control state structure
|
||||
* power_control: lchan_ul_pf_ewma(): do not use lchan->meas.res_nr
|
||||
* power_control: lchan_ms_pwr_ctrl(): use existing 'trx' pointer
|
||||
* power_control: generalize and rename lchan_ul_pf_ewma()
|
||||
* power_control: lchan_ms_pwr_ctrl(): make use of params/state pointers
|
||||
* power_control: remove a logging statement and early return
|
||||
* power_control: do not log averaged RSSI values as 'rx-current'
|
||||
* power_control: derive calc_delta() from lchan_ms_pwr_ctrl()
|
||||
* power_control: implement BS (Downlink) Power Control
|
||||
* power_control: cosmetic: fix weird spacing
|
||||
* power_control: clarify units in 'struct bts_power_ctrl_params'
|
||||
* power_control: clarify units in 'struct lchan_power_ctrl_state'
|
||||
* rsl: properly initialize MS/BS Power Control state
|
||||
* power_control: make raise/lower step limitation configurable
|
||||
* vty: resurrect per-lchan BS/MS Power Control information
|
||||
* vty: fix dump_lchan_trx_ts(): dump dedicated channels only
|
||||
* rsl: remove redundant boolean flag in rsl_rx_chan_activ()
|
||||
* power_control: check-in new parameters and default values
|
||||
* power_control: add VTY introspection commands for MS/BS params
|
||||
* l1sap: fix: enable UL SACCH repetition if RxQual threshold is 0
|
||||
* sysinfo: fix less-than-zero comparison of an unsigned value
|
||||
* osmo-bts-trx: vty: clarify and improve some deprecation messages
|
||||
* power_control: vty: re-use cfg_bts_ul_power_target()
|
||||
* power_control: vty: deprecate 'uplink-power-control' commands
|
||||
* power_control: handle MS/BS Power control params on A-bis/RSL
|
||||
* vty: add a command to show GPRS related info
|
||||
* power_control: migrate MS/BS control loops to the new params
|
||||
* power_control: generalize measurement pre-processing state
|
||||
* power_control: properly track the first initial state
|
||||
* power_control: use more reasonable reduce step size
|
||||
* power_control: rework handling of DL RxQual measurements
|
||||
* power_control: BS power shall not be reduced on C0
|
||||
* paging: refactor and optimize fill_paging_type_1()
|
||||
* power_control: print current RxLev and lower/upper thresholds
|
||||
* power_control: fix: properly print 'delta' applied to attenuation
|
||||
* vty: fix error messages in lchan specific commands
|
||||
* vty: add macro for 'bts <0-0> trx <0-0> ts <0-7> lchan <0-1>'
|
||||
* vty: extend trx / lchan number range in BTS_T_T_L_CMD
|
||||
* vty: make commands related to the loopback mode hidden
|
||||
* vty: add expert commands for MS/BS power control
|
||||
* power_control: add test for inc / red step size limitations
|
||||
* l1sap: fix gsmtap_ph_{data,pdch,rach}(): use 'const'
|
||||
* l1sap: include Uplink RSSI in GSMTAP packets
|
||||
* power_control: clarify the meaning of 'delta' in logging messages
|
||||
* pcu_sock: pcu_tx_si_all(): make 'si_types' const
|
||||
* pcu_sock: pcu_tx_si_all(): cosmetic coding style change
|
||||
* pcu_sock: pcu_tx_si_all(): fix returning ununitialized rc
|
||||
* osmo-bts-trx/scheduler: use DMEAS in trx_sched_meas_avg()
|
||||
* oml: cosmetic code style changes in rx_oml_ipa_rsl_connect()
|
||||
* vty: register libosmocore's FSM introspection commands
|
||||
* oml: avoid redundant ntohl() / htonl() conversion
|
||||
* oml: make 'struct tlv_parsed' pointer const where possible
|
||||
* oml: use regular TLVP_PRES() in rx_oml_ipa_rsl_connect()
|
||||
* power_control: cosmetic: fix swapped {L,U}_RXQUAL_XX_P comments
|
||||
* power_control: implement handling of P_Con_INTERVAL parameter
|
||||
* oml: reuse the given msgb in oml_fom_ack_nack()
|
||||
* oml: ensure that IPA RSL Connect ACK/NACK contains all IEs
|
||||
* main: cosmetic: tweak deprecation warning messages
|
||||
* GSMTAP: move 'gsmtap_sapi_names' from l1sap.c to vty.c
|
||||
* GSMTAP: fix wrong naming of per-BTS SAPI commands
|
||||
* GSMTAP: move 'struct gsmtap_inst' and masks to 'struct gsm_bts'
|
||||
* ta_control: cosmetic: use correct naming for MIN/MAX constraints
|
||||
* ta_control: make 'struct bts_ul_meas' parameters const
|
||||
* ta_control: fix Timing Advance control for SDCCH channels
|
||||
|
||||
[ Harald Welte ]
|
||||
* rsl.c: Fix compiler error on gcc-9.2.1
|
||||
* virtual: Fix VTY commands to specify GSMTAP multicast groups
|
||||
* l1sap: Use msgb_pull_l2() and unify l1sap_tch_ind + l1sap_ph_data_ind
|
||||
* osmo-bts-virtual: implement GSMTAP_CHANNEL_VOICE
|
||||
* osmo-bts-virtual: Add "virtual-um ttl <0-255>" VTY option
|
||||
* osmo-bts-virtual: Fix "virtual-um net-device NETDEV"
|
||||
* cosmetic: remove dead code from logging.c
|
||||
* fix compilation with gcc-10
|
||||
* osmo-bts-virtual: Avoid rejecting AMR in uplink
|
||||
* virtual/scheduler: log unknown GSMTAP chan
|
||||
* Ensure we include lchan name in all LAPDm log lines
|
||||
* osmo-bts.spec.in: Use %config(noreplace) to retain current config file
|
||||
* bts: Add VTY command to manually override Radio Link Timeout
|
||||
* sysinfo: Only send SI13 if PCU is connected
|
||||
* sysinfo: Don't broadcast SI4 GPRS INDICATOR if PCU is disconnected
|
||||
* use osmo_fd_setup() everywhere
|
||||
* remove dead oml_router code
|
||||
* sysinfo.c: Fix SI4 GPRS patching which overwrote CBCH IE
|
||||
* fix-up missed review comment in CBCH SI4 patching fix
|
||||
* major README uppdate
|
||||
* Use osmo_fd_*_{disable,enable}
|
||||
* add support for sysmoBTS 1003 aka "1002 with GPS and PoE"
|
||||
|
||||
[ Philipp Maier ]
|
||||
* ta_control: move timing advance code from osmo-bts-trx to common
|
||||
* measurment: write irssi_full_sum variable correctly
|
||||
* l1sap: merge MEAS IND into PRIM PH DATA / PRIM TCH
|
||||
* Do not depend on pcu_direct flag when populating ph_data_ind
|
||||
* osmo-bts-sysmo: merge measurement data and payload
|
||||
* osmo-bts-trx: do not set rx-gain to 1 by default
|
||||
* scheduler: always call Uplink burst handler on NOPE.ind
|
||||
* logging: use only LOGL_NOTICE as defualt loglevel
|
||||
* dtx: add detection of AMR DTX frames for osmo-bts-trx
|
||||
* measurement: remove unecessary is_amr_sid_update parameter
|
||||
* measurement: make measurements more debugable
|
||||
* measurement: expect at least 1 SUB frame for AMR
|
||||
* osmo-bts-trx/scheduler: fix measurement handling for SUB frames
|
||||
* vty: add attributes to VTY commands indicating when they apply
|
||||
* sched_lchan_tchh: initialize meas_avg with zeros
|
||||
* main: add commandline option --vty-ref-xml
|
||||
* cosmetic: add missing semicolon after OSMO_ASSERT()
|
||||
* sched_lchan_tchf: count measurements for FACCH/F only once
|
||||
* measurement: count all blocks as SUB for TCH/F in signalling mode
|
||||
* measurement: fix expected number of measurements
|
||||
* measurement.c: fix integer overflow problem
|
||||
* rsl.adoc: add info about RSL_IE_OSMO_REP_ACCH_CAP
|
||||
* l1sap: pre-initalize pointer with NULL to avoid gcc warning
|
||||
* l1sap: add repeated downlink FACCH
|
||||
* rsl.adoc: update documentation for RSL_IE_OSMO_REP_ACCH_CAP
|
||||
* l1sap: also include SRR bit in RSL l1 info field.
|
||||
* l1sap: add repeated downlink SACCH
|
||||
* l1sap: add repeated uplink SACCH
|
||||
* l1sap: acch_repetition fix hysthereis threshold table
|
||||
* l1sap: use rxlev_full when no DTX was used
|
||||
* pcu_sock: send SI1, SI3 and SI13 via PCUIF
|
||||
* pcu_sock: fix uninitalized returncode value
|
||||
* l1sap: fix repeated_dl_facch_active_decision()
|
||||
* l1sap.c: be sure that FACCH repetition is turned off
|
||||
* l1sap: be sure that UL-SACCH repetition is turned off
|
||||
* l1sap: fix comment: sapi number is missing
|
||||
* vty: dont put a colon after vty_out in cfg_out macro
|
||||
* gsm_data: handle l1_info with structs
|
||||
|
||||
[ Pau Espin Pedrol ]
|
||||
* l1_if: Fix strange formatting of Meas info logging
|
||||
* l1sap: Change loglevel of Rx TCH.ind INFO->DEBUG
|
||||
* bts-trx: trx_if.c: Fix some printf formats
|
||||
* cosmetic: Fix some typos with codespell
|
||||
* lc15: Fix returning values on void function
|
||||
* lc15: Fix mismatching signature in callback provided
|
||||
* oc2g: Fix returning values on void function
|
||||
* oc2g: Fix mismatching signature in callback provided
|
||||
* Use OSMO_FD_* instead of deprecated BSC_FD_*
|
||||
* l1_utils.h: Avoid redefinition of global vars defined in l1_utils.c
|
||||
* vty: Fix misleading define name
|
||||
* tests/tx_power: Speed up test
|
||||
* doc: Update vty reference xml file
|
||||
* bts-trx: vty: Add 'nominal-tx-power' cmd
|
||||
* bts-trx: phy_link: Improve logging fmt in phy_link_state_set()
|
||||
* oml.c: Fix whitespace in log line
|
||||
* oml.c: Log ADM STATE change locked/unlocked
|
||||
* scheduler.c: Fix trailing whitespace
|
||||
* pcu_sock: Change log about tx PCH confirm INFO->DEBUG
|
||||
* bts-trx: Implement power ramping during BTS bring up
|
||||
* bts-trx: Rename setpower TRXC functions to describe they use power attenuation
|
||||
* bts-trx: Introduce helper func l1if_trx_set_nominal_power
|
||||
* bts-trx: Use TRXC cmd NOMTXPOWER to retrieve nominal tx power from osmo-trx
|
||||
* bts-trx: Re-apply tx power if nominal power is received after POWERON
|
||||
* scheduler: Fix reading out of buffer during tx of dummy burst on PDCH TS with EGPRS enabled
|
||||
* abis.c: Grab reference to e1inp_line_get if already created
|
||||
* doc: Fix typos in bts-models.adoc
|
||||
* scheduler: Improve logging about prim being out of range
|
||||
* scheduler: Early return in _sched_dequeue_prim() and clarify FN cases
|
||||
* scheduler: _sched_dequeue_prim(): Refactor goto paths
|
||||
* scheduler: _sched_dequeue_prim(): Refactor found_msg goto path
|
||||
* cosmetic: common/Makefile.am: split each source file in one line
|
||||
* cosmetic: include/osmo-bts/Makefile.am: split each header file in one line
|
||||
* Merge gsm_data_shared.h into gsm_data.h
|
||||
* scheduler: Add rate_ctr informing about too low rts-advance
|
||||
* scheduler: Add rate_ctr informing about Dl block not found
|
||||
* handover_tests: Avoid redefining all bts_model stubs
|
||||
* meas_tests: Avoid redefining all bts_model stubs
|
||||
* tests/stubs.c: Add missing stub for bts_model_change_power
|
||||
* cosmetic: {oc2g,lc15}bts_bty.c: Fix trailing whitespace
|
||||
* Fix missing bts_model implementations in stubs.c and bts_model.c
|
||||
* Introduce LOGPTRX macro and use it in tx_power.c
|
||||
* power_ramp: Add support to get callback when ramping process completes
|
||||
* bts-trx: Instruct user to set manually nominal-tx-power if NOMTXPOWER not supported
|
||||
* tx_power: Log bypass param in power_ramp_start
|
||||
* phy_link.h: Drop unimplemented function definition
|
||||
* bts.c: Fix typo in log line and improve it
|
||||
* abis.c: Use LOGPIL when logging signalling link down
|
||||
* Introduce bts_shutdown FSM
|
||||
* Implement tx power ramp down during BTS shutdown
|
||||
* bts-trx: Split part of bts_model_trx_close() steps into bts_model_deact_rf
|
||||
* bts_shutdown: First deact RF on all TRX, finally close them
|
||||
* bts_model: Convert bts_model_trx_close() to return asynchronously
|
||||
* bts_shutdown: Wait until all TRX are closed
|
||||
* bts-virtual: Implement bts_model_trx_close
|
||||
* bts-trx: Mark 'osmotrx power' VTY cmd as deprecated
|
||||
* Fix shutdown in osmo-bts-{omldummy,virtual}
|
||||
* bts-omldummy: Implement bts_model_trx_close
|
||||
* bts-omldummy: Speed up shutdown (instantaneous ramp)
|
||||
* tx_power: Support controlling BTS with nominal tx pwr < 0dBm
|
||||
* bts-trx: Introduce rate counter for scheduler timerfd missed FNs
|
||||
* bts_shutdown: Speed up shutdown if no TRX is operational
|
||||
* pcu_sock: Avoid presenting TS from disabled TRX as available to PCU
|
||||
* bts-trx: Implement ramp up/down during ADM state change
|
||||
* gsm_data.h: Use enum type for NM state fields
|
||||
* Move nm_state and Mo related code gsm_data.* => oml.*
|
||||
* Move gsm_bts code gsm-data.* => bts.*
|
||||
* bts-virt: Don't rely on gsmtap_makemsg() returning NULL for GSMTAP_CHANNEL_UNKNOWN
|
||||
* Move struct gsm_bts_trx: gsm_data.* & bts.* => bts_trx.*
|
||||
* bts-trx: Don't set OPSTATE enabled during trx_init
|
||||
* common: Avoid changing OPSTATE to Enabled upon RSL up
|
||||
* bts-trx: Remove unused function l1if_provision_transceiver()
|
||||
* bts-trx: introduce TRX provisioning FSM
|
||||
* tx_power_test: Disable using color in log output
|
||||
* bts-trx: Use bool type for on/off state variables
|
||||
* bts-trx: Integrate TRX provisioning logic more tightly into the FSM
|
||||
* bts-trx: Delay TRXC POWERON cmd until all TRXs are provisioned
|
||||
* rsl: Fix wrong param passed to gsm_pchan_name() in log line
|
||||
* bts-trx: Fix osmocom dyn ts assert hit during Adm State Unlock
|
||||
* bts-trx: prov_fsm: Fix mess with 1 event having 2 names
|
||||
* bts_shutdown_fsm: Fix switching too quickly to state WAIT_TRX_CLOSED
|
||||
* common: Avoid call to bts_model_chg_adm_state() if there's no ADM state change
|
||||
* bts-trx: Fix handling ADM state change while previous one WIP
|
||||
* vty: Allow setting power-ramp max-initial to negative values
|
||||
* bts-trx: Fix assert hit when rf_locked in .cfg and TS TCH/F_PDCH
|
||||
* tx_power: Take into account max-initial when ramping up bigger power lvl intervals
|
||||
* doc: configuration.adoc: Document ramping down feature
|
||||
* common: Support setting rt prio through new libosmovty sched VTY cmds
|
||||
* tests: tx_power: Extend and add extra power_ramp buggy case
|
||||
* common: tx_power: Fix bug in power ramp up below max-initial value
|
||||
* Update dependency on libosmocore 1.4.0
|
||||
* configure.ac: Fix trailing whitespace
|
||||
* pcu_sock: Fix typo in log message
|
||||
* bts-trx: Use TRXC RFMUTE instead of resetting the scheduler
|
||||
* bts-trx: Ensure RFMUTE state is set properly at startup
|
||||
* scheduler: Drop unused function trx_sched_reset()
|
||||
* Fix RadioCarrier OML Operative State Change report not sent on some scenarios
|
||||
* Improve logging around failing to (de)activate chan_nr
|
||||
* Improve error handling and logging in gsm_pchan2chan_nr()
|
||||
* Improve logging and error handling receiving act_req for dyn TS not yet configured
|
||||
* pcu_sock: Only announce dyn TS already configured by lower layers
|
||||
* Avoid sending RSL RF REL ACK if PDCH chan is disabled by administrative lock
|
||||
* oml: Set RadioChannel operational state to Enabled only during OPSTART
|
||||
* gsm_data.h: Drop unused struct field
|
||||
* contrib/jenkins: Enable parallel make in make distcheck
|
||||
* Drop unused param in oml_init()
|
||||
* Change NM Channel availability Dependency->Offline when RadioCarrier becomes enabled
|
||||
* Introduce NM BTS Site Manager FSM
|
||||
* Introduce NM BTS FSM
|
||||
* Introduce NM Radio Carrier and Baseband Transceiver FSMs
|
||||
* Introduce NM Channel FSM
|
||||
* bts_trx.c: Dispatch missing NM_EV_RSL_UP/DOWN to the bb_transc object
|
||||
* oml: Set NM_OPSTATE_DISABLED by default
|
||||
* common: Enable SIGABRT signal handler
|
||||
* common: generate coredump and exit upon SIGABRT received
|
||||
* sysmobts-mgr: generate coredump and exit upon SIGABRT received
|
||||
* oc2g-mgr: generate coredump and exit upon SIGABRT received
|
||||
* lc15-mgr: generate coredump and exit upon SIGABRT received
|
||||
* nm_channel_fsm: Fix several FSM internal transitions not being made
|
||||
* cosmetic: sysmobts-mgr: fix whitespace indentation
|
||||
* tests: Explicitly drop category from log
|
||||
* tests: Replace deprecated API log_set_print_filename
|
||||
|
||||
[ Oliver Smith ]
|
||||
* rsl: make IP DSCP configurable
|
||||
* VTY: add "test send-failure-event-report"
|
||||
* contrib: import RPM spec
|
||||
* contrib: integrate RPM spec
|
||||
* Makefile.am: EXTRA_DIST: debian, contrib/*.spec.in
|
||||
* contrib/jenkins: don't build osmo-gsm-manuals
|
||||
* configure.ac: set -std=gnu11
|
||||
* common/measurement.c: fix gcc 4 + -std=gnu11 error
|
||||
|
||||
[ Harld Welte ]
|
||||
* trx: Fix reported BER for TCH/H
|
||||
* trx: Use NOPE indications from OsmoTRX for TCH/F and TCH/H
|
||||
* trx: Use NOPE indications on SDCCH
|
||||
|
||||
[ Eric ]
|
||||
* configure.ac: fix libtool issue with clang and sanitizer
|
||||
|
||||
[ Rafael Diniz ]
|
||||
* osmo-bts-litecell15: Implement missing features.
|
||||
|
||||
[ Alexander Couzens ]
|
||||
* measurement: replace u_int64_t with uint64_t
|
||||
* pcuif_proto: version 0xa: add support for IPv6 NSVCs
|
||||
* pcuif_proto: fix typo in comment
|
||||
* Revert "pcuif_proto: version 0xa: add support for IPv6 NSVCs"
|
||||
* pcuif_proto: version 10: add support for IPv6 NSVCs
|
||||
* Introduce the new OML NM_ATT_OSMO_NS_LINK_CFG to configure IPv6 NSVC for PCU
|
||||
* common/bts: set feature IPV6_NSVC
|
||||
* OML: correct parse the NM_ATT_OSMO_NS_LINK_CFG field address_family
|
||||
|
||||
[ Daniel Willmann ]
|
||||
* osmo-bts-trx: Use much lower clock advance values towards PCU and TRX
|
||||
|
||||
[ Neels Hofmeyr ]
|
||||
* rename to release_sapi_ul_rach(), simplify
|
||||
* part 1 of: fix SAPIs for handover to match 48.058 4.1.{3,4}
|
||||
* part 2 of: fix SAPIs for handover, osmo-bts-sysmo
|
||||
* part 3 of: fix SAPIs for handover, osmo-bts-trx
|
||||
* part 4 of: fix SAPIs for handover, osmo-bts-lc15
|
||||
* part 5 of: fix SAPIs for handover, osmo-bts-oc2g
|
||||
* log: rsl_rx_chan_activ: show chan type as human readable string
|
||||
* chan activ: activate DL SACCH only when TA is known
|
||||
* GSMTAP: make remote host for Um logging configurable via VTY
|
||||
|
||||
-- Pau Espin Pedrol <pespin@sysmocom.de> Tue, 23 Feb 2021 16:35:17 +0100
|
||||
|
||||
osmo-bts (1.2.0) unstable; urgency=medium
|
||||
|
||||
[ Oliver Smith ]
|
||||
|
|
|
|||
|
|
@ -8,11 +8,11 @@ Build-Depends: debhelper (>= 9),
|
|||
dh-systemd (>= 1.5),
|
||||
autotools-dev,
|
||||
pkg-config,
|
||||
libosmocore-dev (>= 1.4.0),
|
||||
libosmo-abis-dev,
|
||||
libosmocore-dev (>= 1.5.0),
|
||||
libosmo-abis-dev (>= 1.1.0),
|
||||
libgps-dev,
|
||||
txt2man,
|
||||
osmo-gsm-manuals-dev
|
||||
osmo-gsm-manuals-dev (>= 1.1.0)
|
||||
Standards-Version: 3.9.8
|
||||
Vcs-Browser: http://git.osmocom.org/osmo-bts/
|
||||
Vcs-Git: git://git.osmocom.org/osmo-bts
|
||||
|
|
|
|||
Loading…
Reference in New Issue