Harald Welte
f58e797d34
update data sheets, add some GSM900 variants
2012-10-23 01:06:11 +02:00
Harald Welte
1dc0f7ec83
schematics / gerber of 900 MHz PA-only version
2012-10-23 01:05:22 +02:00
Harald Welte
50051ac020
Start a PA-only version for GSM 900
2012-10-23 00:31:52 +02:00
Harald Welte
7aa09d697f
add a PA-only version without LNA for DCS 1800
2012-10-23 00:31:30 +02:00
Harald Welte
78e1dd8030
for pa_only_1800 as copy of frontend_v2
2012-10-22 22:13:17 +02:00
Harald Welte
a0e079d68f
move dimensions a bit closer to the PCB for print view
...
(allows larger scaling on A4 printout)
2012-10-22 22:12:04 +02:00
Harald Welte
4cc155cfb1
add more recent schematics + gerber renderings
2012-09-20 11:03:10 +02:00
Harald Welte
e33896e33e
BOM: use 25x25 mm shielding cover, not 30x30
...
The BOM contained the wrong part numbers for the shielding cover
2012-05-21 13:49:04 +02:00
Harald Welte
ce6c03105f
import partlist and BOM
2012-05-20 01:32:24 +02:00
Sylvain Munaut
e80c6d1961
design: Make the traces 40 mil wide with 12 mil GND separaton
...
This should keep a ~ 55 ohm impedance (close enough)
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2012-05-19 22:18:29 +02:00
Sylvain Munaut
ab37213276
design: Move the outside holes closer to their optimal position
...
According to the WAG100 datasheet they should be 36.25 mm from the center
axis. Now they are 36.2 mm from the center axis which should work fine.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2012-05-18 16:24:20 +02:00
Sylvain Munaut
d997ffccfa
design: Major revision of the PCB to fit into enclosure
...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2012-05-18 15:00:41 +02:00
Sylvain Munaut
ba66fbbb40
design: Import original design as Eagle 6.x XML format
...
This is pretty much the first manufactured board. (just a couple
of solder mask fixes)
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2012-05-18 12:55:35 +02:00
Sylvain Munaut
3dd0e5cf8e
design: Remove sch & brd because they were binaries from Eagle v5.x
...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2012-05-18 12:54:40 +02:00
Sylvain Munaut
20ee096fbf
design: Add gitignore for eagle backup files
...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2012-05-18 12:53:51 +02:00
Harald Welte
e8f86fb44d
add fischer case drawing
2012-05-17 16:18:28 +02:00
Harald Welte
1ca0e6e9ff
add datasheet of epcos filter
2012-01-11 14:27:43 +01:00
Harald Welte
a2e6060754
add more data sheets
2012-01-11 14:25:45 +01:00
Harald Welte
841720c93d
initial import of mini-amp project
2012-01-11 14:22:19 +01:00