Osmocom's Base Station Controller for 2G mobile networks https://osmocom.org/projects/osmobsc
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
osmo-bsc/debian/changelog

2342 lines
117 KiB

osmo-bsc (1.9.0) unstable; urgency=medium
[ Philipp Maier ]
* abis_nm: fix typo
* abis_nm: use struct sdp_firmware from libosmocore
* bts-examples: add example for E1 connected BTS
* abis_nm: actively block BTSs with invalid configuration
* bts: add missing return -EINVAL statements
* bts: fix sourcecode formatting (excess whitespace)
* nm_bts_fsm: fix sourcecode formatting
* bssmap_reset: make T4 user configurable
[ Oliver Smith ]
* bsc_subscr_conn_fsm: fix crash if !conn
* Cosmetic: osmo-bsc/osmo_bsc_bssap: fix formatting
* stats: add bsc.paging:expired
* treewide: remove FSF address
* contrib/osmo-bsc.spec.in: add new config files
* contrib/osmo-bsc.spec.in: fix 4trx example paths
* bts_model_osmobts_init: order feats alphabetically
* Cosmetic: bts_model_osmobts_init: update comment
* abis_nm: don't compare assumed/reported features
* gsm_data: add gsm_set_bts_model
* Always use reported features if available
* contrib/jenkins.sh: check osmo_bts_has_feature use
* abis_nm_ipaccess_rsl_connect: initialize ia
* bts_model_*_start: move set_feature calls to _init
* abis_nm: add bts model features to reported ones
* Check VTY config against features reported by BTS
* abis_nm: run gsm_bts_check_cfg during oml bring up
* Cosmetic: bsc_vty: tweak msc pooling strings
[ Neels Hofmeyr ]
* hodec2: fix segv for inter-BSC ho target
* dbg log: abis_rsl print_meas_rep(): clarify rxlev
* fix chreq:* counters: typos in chreq:successful_* constants
* dbg log: also log assignment counters on BTS level
* fix assignment success counters: count *before* cleanup of fsm state
* log: always include timeouts in FSM transition logging
* lchan/gscon: always clear both cross ref pointers
* lcs: fix bsc_subscr use_count leak
* fix gscon clear 1/n: store clear cause in gscon
* fix gscon clear 2/n: proper state transition to ST_CLEARING
* fix gscon clear 3/n: separate state for SCCP RLSD
* gscon clear: without SCCP conn, no need to wait for RLSD timeout
* fix two comments in chan_counts.h
* rename RSL_ENC_ALG_A5 to ALG_A5_NR_TO_RSL, clarify
* fix inter-BSC-in handover encryption
* cosmetics around select_best_cipher()
* inter-BSC HO in: add speech IEs only on speech mode lchans
* inter-BSC HO in: add Speech Codec (Chosen) IE to HO Req Ack
* inter-BSC HO in: add Codec List (BSS Supported) IE to HO Req Ack
* tweak logl to ERROR for invalid initial BSSMAP
* silence bogus error: event not permitted: READY_TO_SWITCH_RTP
* add missing counter increment for Perform Location Request
* add counter for inter-BSC incoming Handover Request
* support "empty" SCCP N-Connect from MSC
* tweak error msg: s/inter-BSC MT/inter-BSC incoming
* inter-BSC incoming HO: store Codec List (MSC Preferred)
* fix extraneous newlines in ho_fail() invocations
* fix typo in name of BSS_MAP_MSG_ASSIGNMENT_RQST
* hodec2: show reported ho oscillation from bad rxqual
* hodec2: add penalty-time low-rxqual-ho
* assignment_fsm: always mark MGCP ci as completed
* assignment_fsm: always update RTP info
* hodec2: apply penalty_low_rxqual_as only on assignment
* emerg call: fix RR release cause for pre-emption
* emerg call: tweak log, comments
* emerg call deny: fix RR release cause
* emerg call deny: log on LOGL_ERROR
* emerg call: send BSSMAP Clear Req cause as preemption
* fix fallout from: 'stats: new trackers for lchan life duration'
* do not BSSMAP Clear on lchan rel when LCS is still ongoing
* fix rare segfault in MGCP client handling
* drop log from ts_is_usable()
* code cleanup for all_allocated timers, no functional change
* fix performance for chan_counts and all_allocated stats
[ Pau Espin Pedrol ]
* Disable C/I based MS Power Control Loop by default
* Drop unneeded ax_check_compile_flag.m4
* Fix DLCI CC bits transmitted in SAPI "n" REJECT
* bts: Add explicit switch case for Cell Id SAI
* doc: bsc.adoc: Update timer info from code (gsm_network_T_defs)
* tests: nanobts_omlattr_test: Use msgb_eq_data_print() helper
* ipa oml: Fix encoding of T3105
* bts_vty.c: Fix typo in comment
* SI13: Always send ext_info
* SI13: Make sure egprs_supported field is always updated
* SI13: Avoid enabling use_egprs_p_ch_req if egprs not supported
* system_information: Move all si13 specific val update to generate_si13()
* SI13: Get rid of si13_default
* bsc_vty: Add missing header
* bts: Simplify bts->paging initialization
* tests/bsc/Makefile.am: remove duplicate CFLAGS
* Move struct gsm_bts_paging_state to paging.h
* paging: Use define available in libosmogsm
* rsl_rx_ccch_load: Use UINT16_MAX instead of -1
* paging: Avoid setting up credit_timer every time
* paging: Use llist_first_entry() macro
* paging: Log skip paging due to not enough free channels
* paging: Submit up to 20 paging requests in a single work iteration
* paging: Prioritize requests for new subscribers over retransmitions
* cosmetic:: Document TLVs in nanobts_attr_bts_get()
* Rename functions generating OML SetAttr messages
* bts: Use uint8_t instead of int for ccch_load_ind_thresh
* Introduce VTY command 'ccch load-indication-period <0-255>'
* bts: Make sure paging timers are deleted when struct gsm_bts is freed
* tests: acc_test: fix typo in talloc ctx name
* tests: acc_test: Get rid on unrelated logs in expect file
* paging: Estimate available_slots based on BTS config when no CCCH Load Ind received
* paging: Rework timer lifecycle logic
* paging: Check C0 RSL link instead of OML link
* paging: Decouple retransmit period from regular worker interval
* paging: Improve calculate_timer_3113()
* paging: Improve logging
* paging: Increase T3113 based on paging group load in BSC queue
* paging: Early stop work_timer when paging queue becomes empty
* paging: Recalculate work timer if waiting for retrans
* paging: Document 'ccch_load_ind_period * 2' value
* tests: Order tests alphabetically
* tests/acc: Remove unused var
* abis_rsl.c: Drop unused function
* abis_rsl: Use proper struct in rsl_paging_cmd
* bts: Properly free ctr/stat when bts object is freed
* paging: Flush pending paging requests when bts obj freed
* paging: Take into account extra delay of all paging groups in BSC queue
* tests: Introduce paging_test
* paging: Remove TODO comment
* Drop duplicate function helper
* Remove commented out code
* abis_nm: Use proper define for avail state 0xff
* ipaccess-config: Use proper define for nm availability value
* abis_nm: Merge signals S_NM_STATECHG_ADM and S_NM_STATECHG_OPER
* cosmetic: Fix open brace in same line as func definition
* constify state pointers of struct gsm_nm_state
* acc: Fix erratic ramping behavior when several BTS configured
* nm_statechg_signal_data: Convert state ptr to data
* nm_is_running(): Drop duplicate check
* bts_ipa: Send NM_EV_OML_DOWN following object tree in order
* paging: Improve logging
* paging: Fix recalculate work timer if waiting for retrans
* paging: Avoid unnecessary immediate polling in mainloop
* Revert "fix fallout from: 'stats: new trackers for lchan life duration'"
* Revert "stats: new trackers for lchan life duration"
* Update current NM object state before signalling S_NM_STATECHG
* Introduce new signal S_NM_RUNNING_CHG and implement it for rcarrier,bbtransc
* paging: start/stop credit_timer based on C0 running
* acc: Simplify start/stop by using new signal S_NM_RUNNING_CHG
* nm_*_fsm: Remove comment no longer applying
* nm_rcarrier_fsm: Trigger S_NM_RUNNING_CHG when Admin st changes in op=Enabled
* Move all SMSCB/CBC vty code to its own file
* smscb: Base cell operational life cycle on CBCH being operative
* smscb: Tx CBSP FAILURE/RESTART for specific cell when it becomes (un)operational
* cbsp: Avoid encoding CBSP message if link is down
[ Vadim Yanitskiy ]
* ipaccess-config: improve readability of printed attribute response
* ipaccess-config: request and print NM_ATT_IPACC_NV_FLAGS
* system_information: fix unused 'mask' parameter in list_arfcn()
* tests/gsm0408: add testing coverage for generate_cell_chan_list()
* bitvec2freq_list(): determine empty set by checking the ARFCN count
* bitvec2freq_list(): fix handling of E-GSM ARFCNs
* Fix description of BTS_CTR_BTS_RSL_FAIL: s/OML/RSL/
* fix inp_sig_cb(): dispatch TS_EV_OML_DOWN to all transceivers
* system_information: use is_ipaccess_bts() helper
* system_information: fix DCS/PCS band indicator in generate_si6()
* gsm48_send_ho_cmd(): this function is not used, remove it
* gsm48_make_ho_cmd(): cosmetic: use existing BTS pointer
* gsm48_make_ho_cmd(): make 'struct gsm_lchan' pointer const
* gsm48_make_ho_cmd(): optionally add Cipher Mode Setting IE
* gsm48_make_ho_cmd(): optionally add Synchronization Indication IE
* fixup: gsm48_make_ho_cmd(): optionally add Synchronization Indication IE
* gsm_bts_trx_set_system_infos(): cosmetic: improve readability
* System Information Type 3: allow updating T3212 at run-time
* parse_bssmap_perf_loc_req(): make 'struct tlv_p_entry' pointer const
* BSSMAP LE: fix handling of LCS Client Type IE
* BSSMAP LE: handle optional LCS {Client Type, QoS} IEs
* struct gsm_encr: store alg_id in human-readable format
* cbch_scheduler: cosmetic: s/bts_cbch_timer/bts_cbch_timer_cb/
* fix gsm_bts_get_cbch(): CBCH can be allocated on Cn
* abis_rsl: always check return value of rsl_tlv_parse()
* doc/examples: avoid using deprecated configuration commands
* doc/examples: add a multi-trx config config example
* doc/examples: add a confmerge file with example hopping parameters
* power_ctrl_params_def_reset(): set .ctrl_interval for both UL/DL
* Move power control related definitions to power_control.h
* VTY: clarify help for the Adaptive Multi Rate settings
* bts: gsm_bts_alloc(): rework default multi-rate configuration
* bts: gsm_bts_alloc(): use reasonable multi-rate config defaults
* tests: use 'check_PROGRAMS' instead of 'noinst_PROGRAMS'
* abis_rsl: fix NULL pointer dereference in abis_rsl_rx_rll()
* gsm_data: use llist_for_each_entry() in gsm_bts_by_lac()
* bssap: always check return value of tlv_parse()
* abis_nm: always check return value of tlv_parse()
* utils/meas_db: fix -Wunused-variable warnings
* utils/meas_pcap2db: fix -Wpointer-sign in pcap_cb()
* smscb: fix meaningless condition in etws_primary_to_bts()
* bsc_vty: use llist_for_each_entry in lchan_act_all_cmd
* fix gsm_lchan_and_pchan2chan_nr(): log proper lchan_nr value
* VTY: cosmetic: define and use CHAN_ALLOC_{CMD,DESC}
* tests/handover_cfg.vty: use more precise regex for forbidden lines
* bts_chan_load(): also calculate per-TRX channel load
* doc/manuals: document channel allocation parameters
* gsm_04_08_rr: ensure lchan info is present in all logging messages
* VTY: fix wrong enum value s/ACTIVATE_FOR_VTY/ASSIGN_FOR_VTY/
* ipaccess-config: check value returned by abis_nm_tlv_parse()
[ Harald Welte ]
* om2000: Fix memory leak in OM2000 message handling
* om2000: Don't print "should not generate any message" on CAL_TIME_REQ
* om2000: Don't print "should not generate any message" on FAULT_REP
* SMSCB: Preserve padding at end of page in CBSP -> RSL conversion
* CBSP: implement MESSAGE STATUS QUERY
* abis_rsl: Ensure message length is sufficient for respective header
* smscb: Populate "Number of Broadcasts Completed" to KILL COMPLETE
* abis_rsl: Fix typo in log message
* Handle unknown rllr_ind enum values in rll_ind_cb()
* lchan_fsm: Ignore other SAPIs of RLL_REL_IND for SAPI=0 is received
* lchan_fsm.c: Fix misleading comment
* Fix compile errors on #warning with '-Wall' on gcc-11.2
* smscb: Don't include extraneous IEs in CBSP KILL COMPLETE / FAILURE
* smscb: Store ETWS input state from CBSP
* smscb: Always start ETWS timer even in cells without ETWS support
* cbsp: Implement KILL for Emergency Broadcast
* cbsp: Reject CBSP WRITE for emergency if emergency already active
* bts.c: prevent signed integer overflow in depends_on code
* paging: Avoid queueing more than 60 second estimated requests
* paging: Implement upper bound of 60s for dynamic T3113
* Add stat_item for per-bts [dynamic] T3113 timer
* smscb: Send ETWS PN to BTS if ETWS active before BTS connects
* smscb: "Warning Security Information is always present in ETWS
* Add new Manual "OsmoBSC CBSP Protocol Specification"
* convert README to README.md; expand on all fronts
* update git URLs (git -> https; gitea)
[ Michael Iedema ]
* stats: new trackers for lchan life duration
* stats: new trackers for lchan life duration (v2)
* Expand VTY option which controls use of TCH for signalling
* stats: track TCH/SDCCH lchans reaching fully-established state
* logs: also record which BTS is signaling a SAPI REJECT
[ Keith ]
* Improve parsing of om2000 fault reports
-- Pau Espin Pedrol <pespin@sysmocom.de> Wed, 29 Jun 2022 11:18:10 +0200
osmo-bsc (1.8.0) unstable; urgency=medium
[ Harald Welte ]
* remove obsolete dependency on libosmo-sccp
* manual: Include QoS chapter and add osmo-bsc specific example
[ Javi ]
* Add vty command for Ericsson RBS2000 sync
* Add command to enable RX diversity to RBS2000
[ Oliver Smith ]
* stats: T3122 related: num_values 16 -> 60
* src/utils/meas_vis.c: fix bs_power -> bs_power_db
* handover_test: fix ts_str may be uninitialized
* bsc_ctrl_commands: fix uninitialized value (mode)
* Revert "Turn some compiler warnings into errors"
[ Neels Hofmeyr ]
* refactor handover penalty timers
* drop neighbor_ident_test.c
* fix/refactor neighbor config
* debug log, lchan_fsm: explain leaving wait_rll_rtp_establish state
* fixup for neighbor config for coverity
* drop unused func decl rsl_lchan_mark_broken()
* drop unused gsm_bts_trx->description
* deprecation: use osmo_bts_features_*()
* fix wrong ARFCNs in local-cell neighbor config
* update neighbor ARFCNs on startup and config changes
* manual: Location Services: clarify BSC side address
* abis_nm_ipaccess_rsl_connect(): use msgb to compose attr
* Lb: stop RESET FSM when sccp_user is unbound
* Lb: RESET FSM: never send sccp_user == NULL
* Lb: add missing X12 timer configurability
* Lb: make sure we never have missing timer configurability
* gsm_lchan_name_compute with ctx
* log: drop duplicate logging in ts_setup_lchans()
* comment: tweak pchan_subslots() description
* lchan_release(): do not release UNUSED lchan
* lchan_fsm: mode modify: fix missing timeouts and error transitions
* fix test_gsm48_multirate_config: dump the complete AMR lv buffer
* test_gsm48_multirate_config: rather keep 4x amr_mode
* assignment_fsm: fix failure log message for lchan unavailable
* select_codecs(): do not confuse bool 'true' with integer value 1
* gsm48_send_rr_ass_cmd(): rename dest_lchan to current_lchan
* gsm48_send_rr_ass_cmd(): rename lchan to new_lchan
* log: show src file,line of lchan_set_last_error
* add missing arg braces in LOG_LCHAN macro
* gscon MGCP: properly skip redundant MDCX towards MSC
* cosmetic: rename FOR_* to ACTIVATE_FOR_*
* cosmetic: rename lchan_activate_mode to lchan_activate_for
* lchan and assignment FSMs: make Channel Mode Modify more sane
* assignment_fsm: tweak error log msg for mixed modes
* handover_test: ack release only when lchan is still waiting
* hodec2: remove code dup of rxlev averaging
* handover_test: add bspower to meas-rep cmd
* add test_bs_power.ho_vty to show BS Power HO oscillation
* assignment_fsm: send BSSMAP response only after Assignment Request
* cosmetic scoping in reuse_existing_lchan()
* potential segfault: vty chan act: do not set AMR bits for EFR
* make sure channel mode and s15_s0 are updated only after an ACK
* remove special case from assignment_count_result()
* eliminate lchan->rsl_cmode
* move lchan->csd_mode into channel_mode_and_rate
* AMR config cleanup step 1: split lchan_mr_config()
* AMR config cleanup step 2: filter modes also for VTY
* AMR config cleanup step 3: generate AMR LV on msg composition
* handover dot charts: fix wrong transitions regarding MGW
* handover_test: fix naming/wording: 'handover-req' should be 'handover-cmd'
* assignment_fsm: tweak state transitions (prep for reassignment)
* assignment_fsm: allow assignment to a specific lchan
* vty: actually trigger Assignment for 'assignment', not HO
* hodec 2: do intra-cell congestion resolution by Assignment
* RSL link: explicitly select rsl_link based on lchan
* add chan_mode_to_chan_type()
* gsm48_lchan2chan_desc(): expose TSC as param
* allow explixit TSC Set and TSC on chan activ / modif / assignment
* VTY: dump TSC Set and TSC for each timeslot
* add fields to reflect nr of lchans in ts struct
* replace ts_*_for_each_lchan() with ts_for_n_lchans()
* ensure chan_mode comparisons in non-VAMOS mode
* lchan_fsm: introduce lchan.modify.ch_mode_rate to allow tweaking
* Drop duplicated arfcn_range_encode.c available in libosmocore
* fixup for Mode Modify TSC
* fix rc handling in channel_mode_from_lchan()
* drop unused func decl gsm_lchan_as_pchan2chan_nr()
* handover: apply meas report BS Power to RXLEV, fix ho oscillation
* change bs_power to bs_power_db
* meas rep logging: replace a dozen DEBUGPC() with one DEBUGP()
* meas rep logging: use log_check_level() to skip a logging loop
* fixup: pass tsc = -1 for previous default training sequence code
* hodec2: add handover_test cases for upgrade of TCH/H -> TCH/F
* cosmetic prep: hodec2: move is_upgrade_to_tchf() further up
* hodec2: fix is_upgrade_to_tchf() for requirement A
* allow mode modify when RTP stream is active
* implement Channel Mode Modify to VAMOS mode
* vty: add lchan modify '(vamos|non-vamos)' command
* add lchan->vamos.is_secondary flag
* vty-test: osmo-bsc.vty: test doc of lchan activate cmd
* lchan_fsm: introduce lchan.activate.ch_mode_rate to allow tweaking
* add missing AMR config for RTP activation after mode modify
* implement CHANnel ACTIVate to VAMOS mode
* RR Assignment for VAMOS: send TSC Set
* add VAMOS secondary lchans to timeslot struct
* update the lchan name to always reflect VAMOS shadowness
* rsl_lchan_lookup(): turn cbits if-cascade into a switch()
* rsl_lchan_lookup(): add comment explaining ts_is_capable_of_pchan()
* RSL chan_nr: replace OSMO_ASSERT with error handling
* RSL: rx and tx VAMOS Channel Number cbits for VAMOS lchans
* VTY: 'show lchan': show that lchan is in VAMOS mode
* VTY: add 'vamos-subslot' to activate a secondary lchan
* VTY: add lchan re-assignment command
* log: assignment_fsm: drop newline from assignment_fail
* log: assignment_fsm: tweak err msg for incompatible chan
* clarify bts_chan_load
* get_any_lchan(): reduce minor code dup
* cosmetic loop simplification in gsm48_multirate_config()
* RSL: set default TEI according to TRX number
* lchan_fsm: lchan_fail() strings should not have a terminating newline
* gsm_data.h: add comments about immutable activ/modif/assign request info
* hodec2: implement upgrade TCH/H -> TCH/F (without AFS bias)
* fixup for vamos: fix wrong cbits in rsl_lchan_lookup()
* vty: reassign: add missing check for valid target lchan
* hodec2: don't apply AFS bias to same-cell lchans
* rsl_data_request() check lchan pointer before access
* rsl_lchan_lookup: drop redundant condition
* rewire build_encr_info() to return errors
* dissolve gsm0808_cipher_mode() into bssmap_handle_cipher_mode()
* implement A5/4 in Ciphering Mode procedure
* support A5/4 in inter-BSC Handover
* use osmo_select_shutdown to get rid of SIGTERM sleep
* vty: allow 5 encryption algo entries
* hodec2: add test case showing low rxlev tch/h<->tch/f oscillation
* hodec2: add test case showing low rxqual tch/h<->tch/f oscillation
* handover_decision_2.c: add is_low_rxlev()
* hodec2: fix low rxlev tch/h<->tch/f oscillation
* handover_decision_2.c: add current_rxqual()
* hodec2: fix low rxqual tch/h<->tch/f oscillation
* vty: fix doc: default value for 'nri bitlen'
* vty: add vty doc test for 'nri null' commands
* hodec2: [1/2] implement automatic choice between FULL and SUBSET measurements
* hodec2: [2/2] implement automatic choice between FULL and SUBSET measurements
* hodec1: use same automatic FULL/SUBSET choice as in hodec2
* lchan: call reset() upon alloc
* RES IND: parse msg and store interference levels in lchans
* RES IND: add VTY: bts / channel allocator avoid-interference (0|1)
* RES IND: add test_resource_indication.ho_vty
* RES IND: pick lchan with least interference
* ensure trigger_ho() returns zero only when HO or AS was indeed triggered
* handover_test: also show when an lchan is busy
* switch handover penalty timers to CLOCK_MONOTONIC
* handover_test: add fake-time 'wait'
* test_penalty_timer.ho_vty: show lchan recovery
* handover tests: test passing of penalty timeout
* hodec2: add low-rxqual-assignment penalty timer (1/2)
* hodec2: add low-rxqual-assignment penalty timer (2/2)
* separate 'interference-meas level-bounds' cfg and used
* vty 'interference-meas level-bounds': explain duality in ordering
* add test_dyn_ts_favor_static_ts_as_target.ho_vty
* extend test_dyn_ts_favor_half_used_tch_h_as_target.ho_vty
* RES IND: allow empty Resource Information IE
* RES IND: tweak error code on missing Resource Information IE
* fix CM Re-Establishment Request: allocate new A conn
* log: fix missing newline in lchan_select.c
* debug log: indicate change of primary lchan on a conn
* vty: lchan deact: allow omitting the lchan type arg
* vty: improve err msg for invalid subslot nr
* coverity: quench null deref warning in gscon_change_primary_lchan()
* lchan_fsm_post_activ_ack(): return upon release
* introduce gsm48_lchan_and_pchan2chan_desc()
* error log: improve lchan lookup error msg
* early IMM ASS 1/n: add vty config option
* early IMM ASS 2/n: implement 'pre-chan-ack'
* early IMM ASS 3/n: implement 'pre-ts-ack'
* stat_item desc: add explicit indexes for clarity
* vty: add "msc N bssmap reset" command
* move BSC level stats and rate counters to new bsc_stats.[hc]
* add stat items bsc.0.num_msc:connected, .num_msc:total
* add stat_items for BTS and TRX connection stati
* fixup for Early IMM ASS: use proper TSC
* add CTRL 'rf_states' and 'bts.N.rf_states'
* add CTRL bts.N.trx.M.rf_locked (RW)
* fixup comments for 'rf_states' CTRL command
* fix comment in lchan_fsm.c: s/modification/activation
* fix TSC / TSC Set used for Handover
* tsc fixup: tweak condition for coverity
* drop obsolete comment
* stat: add bts.N.num_trx:total
* stat: add bts.N.num_trx:rsl_connected
* constify lchan_state_is()
* add chreq:successful_<reason> rate counters
* drop unused gsm48_tx_mm_serv_ack()
* for linter: s/while(0)/while (0)
* cosmetic tweaks on handover counting code
* tweak intra-bsc ho counter descriptions
* implement incoming_intra_bsc_ho:* rate counters
* refactor lchan counting
* add time_cc API: cumlative counter for time, reported as rate_ctr
* implement all_allocated:{sdcch,tch} rate counters
* implement all_allocated:{static_sdcch,static_tch} rate counters
* implement bts.N.cm_serv_rej:<cause> rate counters
* move time_cc to libosmocore osmo_time_cc
[ Keith ]
* Ignore CHANnel ReQuireD with Access Delay IE > 63
* Fix MEAS parsing, as Ericsson RBS reports TA shifted by 2 bits.
* Add vty command to manually force MS Uplink Power
* Implement MS Uplink Power Control Loop
[ Vadim Yanitskiy ]
* [hopping] vty: ensure no duplicate hopping ARFCN entries
* [hopping] generate_cell_chan_list(): make some pointers const
* [hopping] gsm48_send_rr_ass_cmd(): use Cell Channel Description from SI1
* [hopping] generate_ma_for_ts() returns no meaningful value
* abis_nm: rework warnings about unknown / not supported features
* abis_nm: cosmetic: use osmo_bts_feature_name()
* [hopping] Rework generation of Cell/Mobile Allocation
* [hopping] bootstrap_rsl(): do not call generate_ma_for_ts() again
* vty: deprecate BTS type 'sysmobts' in favor of 'osmo-bts'
* Replace all references to 'sysmobts' with 'osmo-bts'
* VTY: fix NULL-pointer dereference in lchan_act_single()
* bts_uptime(): do not spam logs with 'OML link uptime unavailable'
* Make interference measurement parameters configurable
* VTY: fix typo in a command description: s/send/sent/
* PCUIF protocol: add message definition for interference report
* abis_rsl: fix rsl_rx_ccch_load(): properly check the message length
* gsm_data.h: remove declaration of non-existing ts_pchan()
* power_control: omit BS Power Parameters IE if the maximum is 0 dB
* power_control: implement BCCH carrier power reduction operation
* power_control: constrain BS power reduction on BCCH carrier
* lchan_fsm: fix potential NULL-pointer dereference
* gsm_04_08_rr: silently ignore RR UTRAN Classmark Change
* rsl_rx_resource_indication(): check result of rsl_tlv_parse()
* rsl_lchan_lookup(): fix handling of ABIS_RSL_CHAN_NR_CBITS_OSMO_PDCH
* [overpower] VTY: cosmetic: fix lower case in command description
* [overpower] VTY: fix copy-pasted warning message
* [overpower] VTY: add more ACCH overpower related parameters
* [overpower] Add VTY transcript tests for all commands
* .gitignore: also ignore *.la files
* .gitignore: remove non-existing ipaccess-firmware binary
* lchan_fsm: cosmetic: move a 'case' below the 'default' branch
* rsl_tx_chan_activ(): fix manual channel activation for nanoBTS
* abis_rsl: do not pass lchan to print_meas_rep_buf()
* abis_rsl: print_meas_rep_{buf,uni}() accept const *mr
* abis_rsl: permit simultaneous ACCH repetition and overpower
* ipaccess-config: reduce verbosity of the OML logging
* ipaccess-config: fix wrong flag name in ipa_nvflag_strs[]
* ipaccess-config: warn about unknown flag name
* doc/manuals: add documentation for interference reporting
* gsm_data: use ascending order for interference boundaries
* doc/manuals: add documentation for Temporary ACCH Overpower
* doc/manuals: fix wrong CI in the inter-BSC handover diagram
* tests/Makefile.am: do not try removing non-existing files
* abis_rsl: simplify checking if channel mode is AMR
* abis_rsl: cosmetic: fix coding style rep_acch_cap_for_bts()
* bts_vty: fix tabs-vs-spaces issues in cfg_bts_rep_dl_facch
* struct gsm_bts: simplify comments for ACCH repetition/overpower
* struct gsm_bts: s/repeated_acch_policy/rep_acch_cap/g
* struct gsm_bts: s/temporary_overpower/top_acch_cap/g
* abis_rsl: {rep,top}_acch_cap_for_bts(): make *lchan const
* abis_rsl: s/*_acch_cap_for_bts/put_*_acch_cap_ie/g
* [overpower] Allow configuring specific channel mode(s)
* [overpower] By default, permit only for speech channels using AMR
[ Alexander Chemeris ]
* stats: Count transitions from BORKEN state due to LCHAN_EV_TS_ERROR signal.
[ Pau Espin Pedrol ]
* cosmetic: Fix typo in func description
* bssap: pass whole tlv_parsed to event GSCON_EV_A_COMMON_ID_IND
* Send EUTRAN neighs based on whether Common Id msg contained Last used E-UTRAN PLMN ID
* Revert "update neighbor ARFCNs on startup and config changes"
* SRVCC: Parse Last Used E-UTRAN PLMN Id in Handover Request
* SRVCC: Forward Last EUTRAN PLMN Id in Handover Required
* osmo-bsc: Avoid erroring every few secs about unconnected BTS
* Fix bts->description field not printed in config write
* ipaccess-config: Clean up sign_link setup helper
* bsc: Clean up TS selection in ipaccess_sign_link_up/down
* bsc: Use osmo_clock_gettime everywhere
* ctrl: Introduce CTRL SET cmd to apply VTY cfg file
* ctrl: Avoid fclose() on NULL pointer
* Use new stat item/ctr getter APIs
* vty: Drop unused old node enum fields
* Introduce VTY command to disable srvcc fast-return on target BTS
* Introduce counters to track SRVCC procedures
* pcuif_proto.h: Add new container messages
* Support proto IPAC_PROTO_EXT_PCU BSC<->PCU
* lchan-select: Avoid setting variable for no reason
* assignment_fsm: Fix null pointer dereference rx ASSIGNMENT_EV_LCHAN_ERROR
* assignment_fsm: Add assert to guard ptr access
* Rename osmo dyn ts enums to contain SDCCH8
* Support SDCCH8 in osmo dyn ts
* lchan_fsm: Allow rx LCHAN_EV_RLL_REL_IND in WAIT_RF_RELEASE_ACK
* doc: bts.adoc: Update dyn ts section to include SDCCH8 support
* lchan_fsm: Improve timeout logging line in state WAIT_RLL_RTP_ESTABLISH
* Avoid switching dyn ts to sdcch8 if it starves later TCH
* cosmetic: Small improvements to _select_sdcch_for_call
* Add new lchan_select_set_type() API helper
* _select_sdcch_for_call: Avoid 2nd lchan lookup when finally selecting it
* lchan_fsm: Allow rx LCHAN_EV_RLL_REL_IND in state BORKEN
* abis_rsl: Log chan rqd reason on resource exhaustion log message
* Fix recent regression in CHREQ allocation
* Split bsc_vty.c creating bts_vty.c
* Split bts_vty.c creating bts_trx_vty.c
* Introduce libbsc to avoid linking long lists of .o files
* Introduce VTY option to forbid use of TCH for non-voicecall signalling
* Clarify string name for GSM_CHREQ_REASON_CALL
* doc: Improve ACC ramp documentation
* doc: manual: Fix typo in text
* vty: Fix wrong TSC sent when activating lchan through VTY
* vty: Fix wrongs params passed in vty warning message
* cosmetic: power_ctrl_params_def: Fix typo in comment
* doc: power_control.adoc: Improve VTY snippet foot notes
* MS Power Control Loop: Support set up of C/I parameters for osmo-bts
* doc: power_control.adoc: Add small time graph showcasing P_CON_INTERVAL
* lchan_fsm: Fix comment
* lchan_fsm: Fix comment
* lchan_fsm: Avoid inheriting bs_power from old lchan
* Support Neighbor Address Resolution over PCUIF IPA multiplex
* Power Control Loop: Set P_CON_INTERVAL to 1 by default
* MS Power Control Loop: Support turn off C/I based logic
* bts_vty: Print C/I power params for osmo-bts only
* MS Power Control Loop: Allow Turn off/on C/I independent from value setting
* cosmetic: fix comment typos in signal.h
* cosmetic: Fix typo in comment
* MS Power Control Loop: Use P_CON_INTERVAL=2 by default
* bts_trx: Fix timeslot_fsm not properly freed during trx free() [1/4]
* Move global var bsc_gsmnet into libbsc [2/4]
* Move ts_fsm_init to static constructor [3/4]
* Get rid of lots of stubs [4/4]
* nm_channel_fsm: drop ipa link if SetChannelAttr fails
* gitignore: Fix typo
* jenkins.sh: Fix typo
* Set subslots_per_pchan[GSM_PCHAN_OSMO_DYN] = 8
* timeslot_fsm: Add assert to make sure we never go out of bounds in ts->lchan array
* Set subslots_per_pchan_vamos[GSM_PCHAN_OSMO_DYN] = 0
* assignment_fsm: Log modified lchan in assignment_fsm_allstate_action()
* lchan_fsm: Fix possible NULL ptr dereference in _lchan_on_mode_modify_failure()
* Properly handle dyn TS TCH with vamos after updating subslots_per_pchan
[ Michael Iedema ]
* stats: add BTS uptime counter
[ Philipp Maier ]
* bts.adoc: fix typo BGSGP -> BSSGP
* handover_cfg: add missing VTY_CMD_PREFIX in comment
* bsc_ctrl_commands: add command to write vty config
* control.adoc: add doc for apply-config-file
* bsc_vty: add vty option to allow call-reestablishment
* handover_ctrl: add control interface for handover settings
* running.adoc: explain mgw reset-endpoint VTY setting
* osmo_bsc_main: remove unused commandline option -l
* bty_vty: add VTY settungs for temporary overpower
* osmo_bsc_main: integrate MGW pooling into osmo-bsc
* osmo_bsc_msc: do not initalize MGCP proxy for AoIP MSCs
* doc/mgwpool: update documentation
* assignment_fsm: make assignment_fsm_timer_cb static
* assignment_fsm: make assignment_fsm_allstate_action static
* assignment_fsm: Check for conn->lchan
* osmo_bsc_main: remove code dup in bootstrap_bts()
* bts: set R99 MSC flag in SI13 in bts_alloc
* bts: set pwrc value in bts_alloc
* bts: set acs value in bts_alloc
* drop chan_load_samples_idx initalization from bootstrap_bts()
* bts: set ncc_permitted from bts_alloc
* osmo_bsc_main: remove not longer needed fixme note
* osmo_bsc_main: remove unused option -t --testmode
* bsc_subscr_conn_fsm: fix mgw-pool ref counting
* neighbor_ident: add comment about Neighbor Address Resolution Service
* control.adoc: improve description of command bts.N.send-new-system-informations
* heighbor_ident: add/del neighbor cells via ctrl interface
* bsc_ctrl_commands: change neighbor-list mode/arfcn via control interface
* control.adoc: comment out fixme note
* osmo_bsc_main: bootstrap_bts: print errornous ARFCN number
* osmo_bsc_main: separate checks from bootstrap_bts
* osmo_bsc_main: move inp_sig_cb() below check_bts and bootstrap_bts
* osmo_bsc_ctrl: make sure strtok results are checked
* osmo_bsc_main: call bootstrap_bts when OML TEI comes up
* osmo_bsc_main: move generate_ma_for_bts() into bootstrap_bts()
[ Eric ]
* vty: allow A5/4 encryption in config
[ Daniel Willmann ]
* bts: Clear BTS_STAT_CHAN_*_{TOTAL,USED} on bts disconnect
-- Pau Espin Pedrol <pespin@sysmocom.de> Tue, 16 Nov 2021 17:21:59 +0100
osmo-bsc (1.7.0) unstable; urgency=medium
[ Harald Welte ]
* Introduce nm_fail_rep_signal_data for "SS_NM, S_NM_FAIL_REP" signal
* OM2000: Add some more message types and IEs we now understand
* remove 'NAT' log category
* handorer.h: Fix compilation with gcc-10
* gsm_data.h: Comment the 'nokia' BTS fields
* bts_nokia_site: Fix LAPD segfault during reset procedure
* [cosmetic] system_information: Values are not guesses; more comments
* bs11_config: Print "Not Equipped" for MBCCU (TRX) that don't exist
* Count RSL DELETE INDICATION received from BTS
* system_information: Set BSS_PAGING_COORDINATION in SI13 for osmo-bts
* vty/bts_resend_cmd: Use gsm_bts_set_system_infos() to increment changemark
* osmo-bsc.spec.in: Use %config(noreplace) to retain current config file
* abis_nm: Avoid various "Unhandled message" errors on BS-11 startup
* Bring timeslot FSMs on BS-11 out of NOT_INITIALIZED state
* Don't print 'bogus channel load sample' message if total == 0
* bts_nokia_site: Clean up logging
* Add example configuration files for E1 BTS
* remove examples/osmo-bsc/ericsson/osmo-bsc.cfg
* osmo-bsc.spec.in: Package E1 config files
* osmo-bsc.spec.in: Add missing directories to package
* debian: Package E1 configuration file examples
* lchan_fsm: silently ignore LCHAN_EV_RLL_ERR_IND
* Add example config files for Ericsson DUG20 based BTS
* acc.c: Don't use C99 constructs, this breaks builds on Debian 8
* BS-11: Fix "CONNECT TERRESTRIAL TRAFFIC"
* Implement support for receiving BSSMAP CommonID from MSC
* osmo_bsc_sigtran.c: Remove unused #defines
* use osmo_fd_setup() whenever applicable
* debian/control: Recommend installation of osmo-mgw
* Use osmo_fd_*_{disable,enable}
* fix some size-t format string characters
* update aoip-mgw-options document with reality of 2020
* abis_om2000: Force TRX NM state to UNLOCKED once TRX is up
* osmobsc-usermanual: Add Chapter with AoIP message flow examples
* OM2K: Permit transition from WAIT_CONF_RES -> WAIT_ENABLE_ACCEPT
* OM2K: Skip the entire CON MO if there are no connection groups
* Add a bts_model->bts_init() and trx_init() call-back function
* abis_om2000: make om2k_mo_name() an exported function
* [cosmetic] abis_om2000: Re-format to use longer lines
* abis_om2000: Mark om2k_mo_fsm_start() as static
* abis_om2000: keep OM2K FSMs around, don't terminate
* om2000: Add "show bts 0 om2k-mo" command
* abis_om2000: Handle DP object in get_om2k_mo()
* smscb: Avoid scheduler array overflow
* smscb: Fix adding of SMSCB messages when no message with lower period exists
* select_best_cipher(): Prefer A5/1 over A5/2
* BS-11: Send proprietary MRPCI message after assignment + HO complete
* hide the "smscb-command" vty command; people should use osmo-cbc
* CBSP: document rate counters and their mapping to basic/extended CBCH
[ Philipp Maier ]
* bsc_main: use higher default loglevels.
* lchan_rtp_fsm: fix out_state_mask
* vty: check with is_ipaccess_bts() before using IPACC
* lchan_rtp_fsm: make _fsm_timer_cb and _fsm_cleanup static
* lchan_rtp_fsm: use E1 endpoints if the BTS is not ipaccess type
* e1: encode line number as trunk number in MGCP endpoint
* gsm_04_08_rr: block EMERGENCY SETUP when EMERGENCY CALLS are denied
* abis_rsl.c: make sure emergency calls are rejected early
* lchan_fsm: merge lchan_mr_config()
* lchan_fsm: make internal functions static.
* lchan_fsm: make rsl mode-modify working again
* abis_rsl: prioritize emergency calls over regular calls
* abis_rsl.c: flush channel request queue on RSL bootstrap
* abis_rsl: inform user when expired channel requests get tossed
* abis_rsl: fix memleak in rach dos reduction function
* bsc_vty: improve manual activation of lchans (debug / labtest)
* bsc_vty: fix manual channel activation
* bsc_vty: fix wrong else-if statement
* gsm_08_08: fix unreachable code in parse_powercap()
* osmo_bsc_bssap: actually check for lchan
* bts: add repeated acch mode flags + vty config
* abis_rsl: parse cm3 and indicate ACCH repetition cap to BTS
* bsc_vty: mark repeated ACCH value of 1.9% to 2.7% BER as default
* bsc_vty: fix acch_repetition ber threshold strings
* abis_rsl: check if emergency calling is disabled before premption
* bsc_vty: mark repeat rxqual 4 (BER >= 1.6) as default
* bts.adoc: describe ACCH repetition settings
[ Vadim Yanitskiy ]
* VTY: fix writing of custom timer values to a configuration file
* vty: fix: restore removed DNAT category as deprecated
* doc/manuals: remove deprecated DNAT from the VTY reference
* rest_octets: cosmetic: fix alignment in gprs_cell_options
* vty: 'gprs 11bit_rach_support_for_egprs': drop redundant check
* vty: 'gprs 11bit_rach_support_for_egprs': clarify error message
* vty: clarify EGPRS Packet Channel Request message support
* A-bis: fix logging level mismatch in abis_nm_rcvmsg_fom()
* bsc_subscr_find_or_create_by_{imsi,tmsi}(): fix NULL pointer dereference
* doc/manuals: regenerate the VTY reference file
* gsm_data: cosmetic: mark argument of is_*_bts() as const
* bts_unknown: fix: properly initialize the feature vector
* bts_sysmobts: fix: properly zero-initialize the feature vector
* bsc_bts_alloc_register(): fix possible NULL-pointer dereference
* handover_test: use 'unknown' BTS type instead of 'sysmobts'
* abis_nm: cosmetic: add curly braces to complex 'if' statements
* abis_nm: cosmetic: use sizeof() for printing buffer size
* abis_nm: fix: properly truncate feature vector reported by BTS
* abis_nm: fix ARFCN list encoding in Set Channel Attributes
* abis_nm: fix length indicator in Set Channel Attributes
* fix crashes due to OSMO_ASSERT(conn->lchan)
* abis_rsl: Mobile Allocation IE in CHANnel ACTIVation shall be empty
* system_information: publicly declare generate_cell_chan_list()
* system_information: constify bitvec in freq. list encoding API
* generate_ma_for_ts(): constify per cell/timeslot ARFCN bit-vectors
* gsm_04_08_rr: fix hopping parameters in RR Assignment Command
* doc/examples: remove deprecated 'dyn_ts_allow_tch_f'
* vty: ensure that all warning messages are prefixed with '%%'
* vty: fix missing comma in a warning message
* vty: introduce and use GPRS_CHECK_ENABLED() macro
* vty: allow enabling freq. hopping regardless of the feature vector
* debian/control: change maintainer to the Osmocom team / mailing list
* vty: fix copy-pasted 'no gprs control-ack-type-rach' description
* fix bsc_sapi_n_reject(): dlci is unsigned, use uint8_t
* bsc_subscr_conn_fsm: fix a memleak in rll_ind_cb()
* bsc_subscr_conn_fsm: use proper cause values in SAPI N REJECT
* abis_rsl: fix IAR Rest Octets in rsl_send_imm_ass_rej()
* vty: add a command to clear hopping ARFCN list
* gsm_04_08_rr: fix hopping parameters in RR Handover Command
* SI Type 4: fix missing CBCH Mobile Allocation IE
* generate_ma_for_ts(): use OSMO_BYTES_FOR_BITS() macro
* generate_ma_for_ts(): fix: properly encode ARFCN 0 (corner case)
* SI Type 4: prevent potential buffer overflow
* vty: propagate result of gsm_bts_set_system_infos()
* fix bootstrap_rsl(): check result of gsm_bts_trx_set_system_infos()
* abis_om2000: check result of gsm_bts_trx_set_system_infos()
* vty: clarify NM state owner printed by 'show trx N' command
* abis_nm: fix erroneous use of LOGPC() instead of LOGP()
* abis_nm: fix msgb memleak in _abis_nm_sendmsg()
* abis_nm: LOGPFOH()/DEBUGPFOH(): remove redundant context info
* abis_nm: abis_nm_get_ts(): use LOGPFOH() instead of generic LOGP()
* abis_nm: use btstype2str() in abis_nm_rcvmsg_manuf()
* abis_nm: use DEBUGPFOH() in abis_nm_rx_sw_act_req()
* abis_nm: use LOGPFOH()/DEBUGPFOH() in parse_attr_resp_info_unreported()
* abis_nm: improve logging message in abis_nm_get_attr()
* generate_ma_for_ts(): simplify MA bit-mask computation
* vty: fix unreacheable code / wrong check in lchan_act_all_trx()
* RSL/BSSAP: fix: properly convert between RSL Link ID and DLCI
* vty: add attributes to VTY commands indicating when they apply
* bts: move rate counter / stat item definitions from *.h to *.c
* main: add --vty-ref-mode, use vty_dump_xml_ref_mode()
* vty: add reminder messages about the radio link timeout
* gsm_08_08: fix NULL pointer dereference in bsc_cm_update()
* NM FSMs: fix DISABLED_NOTINSTALLED -> DISABLED_NOTINSTALLED
* vty: add new attribute for vendor-specific commands
* abis_rsl: turn rsl_msgb_alloc() a macro and move it to header
* power_control: add new structures and default parameters
* power_control: add encoding/init API to 'struct gsm_bts_model'
* power_control: send default parameters from bootstrap_rsl()
* power_control: add encoder for ip.access nanoBTS and OsmoBTS
* power_control: make use of MS/BS parameters in RSL messages
* power_control: add VTY commands for per-BTS configuration
* power_control: add VTY command for re-sending default parameters
* power_control: add VTY command to set static / maximum BS Power
* power_control: reflect MS/BS Power difference in the VTY prompt
* vty: cosmetic: make all 'struct cmd_node' definitions static
* power_control: encoding of H_REQAVE and H_REQT for ip.access
* power_control: fix swapped lower/upper RxQual threshold values
* power_control: enable dynamic MS power control for osmo-bts
* power_control: vty: some commands are not vendor specific
* vty: fix NULL-pointer dereference in cfg_bts_rep_dl_facch()
* power_control: vty: do not print 'no (rxlev-avg|rxqual-avg)'
* vty: join UL/DL SACCH repetition commands together
* vty: fix wrong attributes for UL/DL ACCH repetition commands
* ericsson_rbs2000: fix unreachable code in inp_sig_cb()
* power_control: add documentation on available configuration params
* manuals: fix a duplicate line in the description of DTXu
* manuals: fix a typo: s/DTS/DTX/
* power_control: cosmetic changes and fixes to the documentation
* power_control: add increase / reduce step size recommendations
* vty: use 'const' for *nsvc in config_write_bts_gprs()
* vty: fix writing empty IP address for unconfigured NSVCs
* power_control: fix: properly initialize per-lchan BS power
* vty: fix 'codec-list' command: check all given arguments first
* gsm_data: return early if MS Power class remains the same
* assignment_fsm: assert the result of conn_get_bts()
* power_control: check BTS model in cfg_power_ctrl_avg_osmo_ewma()
* power_control: enable Uplink DPC by default if format is known
* power_control: make P_CON_INTERVAL parameter configurable
* abis_nm: enrich debug messages with contextual info
[ Pau Espin Pedrol ]
* bssap: Avoid logging error if no optional Global Call Ref IE received
* bsc: Allow setting negative nominal tx power through VTY
* Avoid selecting channels from administratively locked trx
* bsc_main: Improve log line on Lost E1 link
* bsc_main: Use LOG_TRX in log line
* ipaccess_sign_link_up: Log sign_link type
* Use OSMO_FD_* instead of deprecated BSC_FD_*
* gsm_data.h: Drop duplicated include stdint.h
* Fix trailing whitespace in several files
* ipaccess_nanobts: Log ipaccess_sign_link_down event
* Move struct gsm_bts: gsm_data.* => bts.*
* bts: Drop duplicated function to get trx by number
* Move struct gsm_bts_trx: gsm-data.* => bts_trx.*
* Move gsm_bts_{trx_}set_system_infos APIs to bts{_trx}.*
* Move acc_ramp_init inside gsm_bts_alloc
* configure.ac: Fix trailing whitespace
* doc: Copy {bsc,bts}.adoc from osmo-gsm-manuals
* {bts,bsc}.adoc: Drop deprecated OsmoNITB references
* rename files acc_ramp.* -> acc.c*
* Introduce support for ACC subset rotation
* Introduce support for ACC ramping during whole BTS life cycle
* Support setting rt-prio and cpu-affinity mask through VTY
* Change default SCTP conn NULL->127.0.0.1 to localhost->localhost
* ctrl: Fix CTRL TRAP for {msc.X,msc_)connection_status not sent
* acc_test: Print allowed ACC from t2 and t3
* acc: Fix ACC rotate barring highest ACCs too quickly during wraparound
* tests: acc_test: Test more rotating scenarios
* Allow storing IPv6 address strings in BSSAP structs
* vty: Hide show running-config ACC ramping params if not enabled
* Fail on invalid IP addresses passed to IPACC MDCX
* Fix creating MGCP proxy socket if MGW listens on an IPv6 address
* lchan_rtp_fsm: Deferr IPACC MDCX after BTS side MGCP MDCX
* oml: Fix premature Opstart to Radio Carrier
* bssap: Use new DTAP DLCI helper fields from libosmocore
* abis_nm: Log Rx Change Administrative State ACK
* abis_nm: Log no state change detected
* abis_nm: Remove duplicated log line
* cosmetic: tests/ctrl_test_runner.py: Fix trailing whitespace
* ipa oml: tx OPSTART after unlocking, not before
* contrib/jenkins: Enable parallel make in make distcheck
* Set all NM OML objects to Locked by default
* Introduce NM BTS Site Manager FSM
* Introduce NM BTS FSM
* Introduce NM BaseBand Transceiver FSM
* Introduce NM RadioCarrier FSM
* Introduce Radio Channel FSM
* OML: Stay compatible with older osmo-bts versions
* abis_nm: Log Opstart NACK with error loglevel
* ipa: Fix use of null pointer in log macro
* nm_channel_fsm: Fix innocuous transition not permitted log error
* main: generate coredump and exit upon SIGABRT received
* ipaccess-proxy: generate coredump and exit upon SIGABRT received
* Store GPRS MOs directly under BTS SiteMgr object
* nm_bts_sm_fsm: Fix peer_has_no_avstate_offline not applied for nanobts
* Introduce NM GPRS NSE FSM
* Introduce NM GPRS CELL FSM
* abis_nm: Simplify param passing to abis_nm_rx_get_attr_resp()
* Handle BTS/BBTRANSC Get Attributes (Ack) in NM FSMs
* Fix typo in function nanobts_attr_nsvc_get
* oml: Delay configuring NSVC until BTS features are negotiated
* gsm_lchan_name: assert on NULL lchan
* Use rest_octets functionalities from libosmocore
* gitignore: Ignore *~
* doc: handover: Fix malformed table
* Introduce Neighbor Resolution Service
* cosmetic: doc: wrap line too long
* cosmetic: bts-sysmo: Fix whitespace indentation
* Allow configuring SI13 CCN_ACTIVE bit from VTY, enable by default on osmo-bts
* Introduce VTY cmd to configure Alpha in SI13
* Move bts_ident_key to neighbor_ident.c
* Fix neigh resolution service on local neighbours
* SI13: Enable sending GPRS Cell Options Extension Information on GPRS-only BTS
* tests: Explicitly drop category from log
* tests: Replace deprecated API log_set_print_filename
[ Oliver Smith ]
* tests/Makefile.am: allow running only one VTY test
* osmo-bsc/bsc_vty: set default gprs cell bvci to 2
* osmo-bsc/bsc_vty: fail on get_amr_from_arg error
* osmo-bsc-minimal.cfg: fix codec-list
* main: exit on mutually exclusive codecs settings
* abis_nm.c: rx_fail_evt_rep: fix sd.bts
* abis_nm: move fail report parsing to extra func
* VTY: add show bts failure report
* VTY: let all descriptions end in \n
* VTY: regenerate bsc_vty_reference.xml
* timers: T->X: 23002, 23004, 23005, 23006
* contrib: import RPM spec
* contrib: integrate RPM spec
* Makefile.am: EXTRA_DIST: debian, contrib/*.spec.in
* lchan_fsm, lchan_rtp_fsm: make all timers configurable
* contrib/jenkins: don't build osmo-gsm-manuals
* configure.ac: set -std=gnu11
[ Neels Hofmeyr ]
* manual: add "Multiple Instances" section, akin to other manuals
* manual: add SCCP/M3UA section from common chapters
* manual: add SCCPlite section
* manual: fix config example typo 'msc-addr'
* manuals: update bsc_vty_reference.xml
* deprecate 'msc' / 'ip.access rtp-base <port>'
* cosmetic: put comment back at proper place in bsc_vty.c
* drop IMSI filter and libfilter completely
* drop CC 'local-prefix' feature
* code cleanup: absorb complete_layer3() into bsc_compl_l3()
* drop all BSC originated USSD notification features
* doc/examples: remove deprecated ussd text config
* drop MSC types "local" vs "normal"
* flatten: move network->bsc_data->* to network->*
* CTRL: determine MSC connection status from RESET-ACK, not AS_ACTIVE
* create only one SCCP user per SCCP instance
* cosmetic: tweak rc type of is_cm_service_for_emerg()
* is_cm_service_for_emerg(): return false, not 0
* gsm0408_test.c: drop test_mi_functionality()
* refactor bsc_find_msc()'s round-robin
* add osmo-bsc --vty-ref-xml: dump VTY ref XML to stdout
* manuals: generate vty reference xml at build time
* osmo-bsc main: exit on cmdline option error
* remove extract_sub(), add bsc_subscr_find_or_create_by_mi()
* use osmo_mobile_identity API everywhere
* tweak log category for Compl L3 error
* MSC pooling: make NRI mappings VTY configurable
* MSC pooling: implement NAS node selection by NRI from TMSI
* MSC pooling: LU: ignore TMSI NRI from a different PLMN
* MSC pooling: add 'no allow-attach' for MSC off-loading
* mscpool: add user manual chapter
* vty: add 'mscpool roundrobin next' for ttcn3 tests
* log: add MSC number to bsc_subscr_conn_fsm id
* debug: log about matching Paging Response to earlier Paging
* MSC pooling: add rate counters
* merge files: absorb osmo_bsc_vty.c into bsc_vty.c
* vty: hide 'mscpool roundrobin next'
* fix segfault introduced by recent segfault fix
* create ASP+AS only once per cs7 instance
* si2quater: fix budget calculation for multiple EARFCNs
* SI2quater: allow storing 48 EARFCNs
* RR Release Cell selection IE: fix repeated EARFCNs encoding
* RR Channel Release: pass Cause code from BSSMAP Clear to the BTS
* propagate RSL error cause codes to RR Channel Release cause
* fix CBSP server: actually open the srv_link
* handover_test.c: add test case 29: TCH/F -> TCH/H
* handover_test.c: typo s/more/less in test 19 description
* hodec2: fix logging of requirements flags
* hodec2 congestion: consider only congested pchan types
* hodec2: do not keep candidates with zero requirements met
* hodec2: log requirements of best candidate, log rxlev in dBm
* cosmetic: bscon: use GSM48_RR_CAUSE_NORMAL instead of 0
* gscon timeout: use proper cause code for lchan release
* debug log: add RR Release cause code to the log
* info, error log: show MSC nr for new conn
* mscpool: fix refcount leak for unusual case of no bts
* CBSP: on RESET, also clear the etws_timer, and stop ETWS PN broadcast
* CBSP: log CBSP RESET on NOTICE
* CBSP: rewrite the CBSP link setup and 'cbc' VTY section
* CBSP: add local bind to client mode
* cosmetic: use local var in handover_start_intra_bsc()
* cosmetic: dissolve error-goto with single source in handover_start()
* ho counters: count invalid target cell as 'error', not 'no_channel'
* fix 'handover:*' counters: add missing / move increments
* fix 'handover:*' counters: remove bogus increments
* fix HO inter-BSC-IN target bts for counters
* add {BTS,BSC}_CTR_INTER_BSC_HO_OUT_FAILED for RR HO Failure
* bssap: do not send a Clear Request after a Clear Command
* handover_fsm: signal Clear from gscon, for proper HO result counts
* handover: fix detection for ambiguous HO neighbor ident
* CBSP: fix link startup when enabled in config file
* drop some unused members and function decls
* CBSP: adjust manual to reflect new 'cbc' VTY config
* CBSP VTY: re-add legacy cbc config for backwards compat
* dissolve bsc_grace_paging_request()
* drop bsc_subscr.lac
* drop unused Tdef for 992427
* add timer.vty
* clean up timer definitions: introduce groups, move some T to X
* tests: add missing *.vty to EXTRA_DIST
* log MSC nr for opening new A conn
* remove unused signature gsm48_handle_paging_resp()
* gscon_bssmap_clear(): guard against NULL msc
* compl l3: separate paging handling from bsc_scan_bts_msg()
* compl l3: parse Mobile Identity once
* compl l3: cosmetics around Create Layer 3
* compl l3: allocate conn in gsm_08_08.c, not gsm_04_08_rr.c
* compl l3: populate conn's bsc subscr from MI
* compl l3: move Paging Response handling out of bsc_find_msc()
* compl l3: move all message parsing out of bsc_find_msc()
* refactor paging: introduce bsc_paging_params
* refactor paging: introduce bsc_paging_start()
* refactor paging: add bsc_subscr to bsc_paging_params
* LCS: add paging reason, return in paging_request_stop()
* introduce osmo_use_count for bsc_subscr
* bsc_subscr_name: print both IMSI and TMSI
* cosmetic: fix naming of GSCON_EV_A_CONN_REQ -> GSCON_EV_MO_COMPL_L3
* LCS: implement re-use of existing A-interface conn
* LCS: SCCP next conn id: prepare Lb-interface
* LCS: implement the bulk of Location Services
* LCS: allow RSL EST IND during GSCON_ST_ACTIVE
* remove unused osmo_bsc_reset.h
* add doc/location_services_ta.msc
* BSSMAP RESET: generalize a_reset FSM
* BSSMAP RESET: move cancel-paging call to osmo_bsc_sigtran_reset()
* BSSMAP RESET: move RESET-ACK into reset fsm
* BSSMAP RESET: tweak logging
* BSSMAP RESET: also accept conn cfm events during ST_DISC
* LCS: disable Lb interface by default, add vty 'smlc' / 'enable'
* add smlc.vty test
* LCS: add proper BSSMAP-LE RESET re-using new generalized reset FSM
* LCS: Lb startup: no need to re-use existing SCCP user
* drop features 'core-location-area-code' and 'core-cell-identity'
* manual: describe LCS and Lb interface
* fix missing RR release when there is no MSC
* add fixme comment for OS#3833
* minor code dup: smlc_set_cs7_instance()
* handover vty doc: explain rxqual values
* handover_test: fix comment
* handover_test prep: move arfcn into create_bts()
* handover_test prep: move generate_si() into create_bts()
* handover_test prep: allow arbitrary timeslots in create_bts() code
* handover_test prep: allow configuring several trx in create_bts()
* handover_test prep: rename 'create-bts' to 'create-n-bts'
* handover_test cosmetic: eliminate bts array and bts_num from main()
* handover_test: allow arbitrary timeslot config and multiple TRX
* handover test: fix dyn ts: set pchan_is on act / rel
* handover test: add 'expect-ts-use' to clarify tests
* handover_test: add 'set-ts-use'
* handover_test: change 'meas-rep' params to bts-trx-ts-ss nr
* handover_test: drop secondary array of lchans
* handover test: add test 30: de-congest TCH/F by moving to dyn TS TCH/H
* handover_test: add test 31: TCH/H: re-use dyn TS
* fix TCH/H allocation: use half occupied dyn TS instead of switching more dyn TS
* hodec 2: prep: common pick_better_lchan_to_move() function
* hodec 2: favor moving dyn TS
* handover test 30: play through filling up all lchans
* handover_test: add test 32: half used TCH/H on dyn TS
* fix AMR start-mode auto: reflect proper ICMI in MultiRate Config IE
* AMR start-mode: send proper smod bits
* AMR start-mode auto: send smod bits as zero
* ctrl_test_runner.py: remove per-test startup delay
* hodec 2: prefer moving TCH/H from half-used dyn TS
* handover_test: implement as VTY shell
* handover_test: log sending ho complete
* handover_test: send ho detection
* handover_test: adjust logging for reproducability
* handover_test: set a fake osmo_mgcpc_ep_ci pointer
* handover_test: rename test scripts from numbers to names
* handover_test: gitignore
* tweak handover_tests.sh
* handover_test: cosmetic cfg simplifications in 5 tests
* handover_test: fix test_congestion.ho_vty meas-rep
* handover_test.c: properly release lchans in set-ts-use
* hodec2: cosmetic: add dBm unit to rxval logging
* hodec2: code dup / cosmetics
* handover_test: add 'meas-rep repeat N'
* handover_test: add test_congestion_favor_best_target_rxlev.ho_vty
* handover_test: add AMR TCH/H->/F tests, showing a bug
* handover_test: show ineffective intra-cell choice
* handover_test: add test_congestion_intra_vs_inter_cell.ho_vty
* hodec2: clarify current and target rxlev per candidate
* hodec2: cosmetic: clarify afs_bias, simplify pick_better_lchan_to_move()
* hodec2: fix candidate choices in congestion check
* handover_test: include ack-chan in expect-chan
* handover_test: safeguard against unhandled chan req
* handover_test: saner chan act handling
* handover_test: saner ho request handling
* handover_test: vty echo
* handover_test: show a bug: add test_congestion_no_oscillation.ho_vty
* hodec2: cosmetic: clarify ho_candidate.{current,target}
* hodec2: reduce check_requirements() args
* hodec2: add ho_candidate.{current,target}.free_tch
* handover_test: add lchan wildcards to meas-rep cmd
* handover_test: show bug: add test_balance_congestion_tchf_tchh.ho_vty
* hodec2: fix congestion oscillation bug
* handover_test: add test_balance_congestion_by_percentage.ho_vty
* hodec2: to balance congestion, use overload percent
* handover_test: enhance test_balance_congestion_by_percentage.ho_vty
* handover_tests.sh: update stdout/stderr only on capital -U arg
* fix for test_dyn_ts_favor_moving_half_used_tch_h.ho_vty
* cosmetic: in a ho test, use '*' instead of pdch
* show bug: add test_dyn_ts_congestion_tch_f_vs_tch_h.ho_vty
* fixate test_dyn_ts_congestion_tch_f_vs_tch_h.ho_vty
* hodec2: fix congestion resolution on dyn TS
* add test_dyn_ts_congestion_tch_f_vs_tch_h_2.ho_vty
* lchan_avail(): omit logging for handover decision 2
* show bug: add test_dyn_ts_balance_congestion.ho_vty
* hodec2: fix congestion balancing on dyn TS
* show bug: add test_dyn_ts_amr_tch_{f,h}_to_{h,f}_congestion_assignment_2.ho_vty
* hodec2: fix intra-cell congestion balancing with source lchan on dyn TS
* lchan assignment when RTP is set up: don't break on Mode Modify
* rename lchan->rqd_ta to last_ta
* lchan activation: indicate whether TA is known
[ Keith ]
* Meas Tools: Avoid OSMO_ASSERT due to uninitialised logging.
* Meas Tools: Avoid unusable terminal in case of error on osmo_sock_init
* Meas Tools, Avoid compiler format warnings
* Disallow changing the type of an existing BTS from the vty
[ Eric ]
* configure.ac: fix libtool issue with clang and sanitizer
[ Sylvain Munaut ]
* om2k: Add definitions for the TG object
* om2k: Allow TG and MCTR to be manipulated via VTY
* om2k: Allow the CON configuration request to be triggered via VTY
* om2k: Add VTY command to allow TX of arbitrary message for testing
* om2k: Don't use slashes in FSM IDs and use dashes instead
* om2k: Fix TS channel config payload for non-superchannel case
* om2k: Fix type of msg_type in abis_om2k_tx_simple
* om2k: Acknowledge the HW Infos Reports
* om2k: Acknowledge the unknown MCTR messages we get from time to time
* om2k: Properly name message 0x0136, found to be MCTR Statistics Report
* om2k: Use the "from config" TS config to setup OM objects
* om2k: Dispatch TS_EV_OML_READY to TS FSM only when it's actually ready
* om2k: Fix the frequency specifier for TX/RX/TS conf requests
* bts_ericsson_rbs2000: Init all the TRX, not just C0
* bts_ericsson_rbs2000: Whitelist the E1d input driver
* om2k: Add option to limit OML version during negotiation
* om2k: Rename MCTR config request constants for consistency
* om2k: Add support for MCTR configuration
* om2k: Properly update the 'fake' 12.21 states using OM2000 status
* om2k: Wait for OM TRX links to stabilize before trying to bring up TRX
* chan_alloc: Don't re-invent trx_is_usable and use existing helper
* gsm_data: Update trx_is_usable for ericsson BTS
* om2k: Fix invalid use of linked list when building hopping freq list
* bts_nokia_site: Fake 12.21 OM objet state as "OK" when boot is done
[ Alexander Chemeris ]
* ctrs: Correctly count load total for dynamic timeslots.
* stats: Report per channel type load to statsd counters.
* stats: Remove dots from the end of stats descriptions.
* Fix indent whitespace and log message.
* stats: Fix stat group index for BTS stats.
* Fix a comment for the handle_unitdata_from_msc() function.
* chan_alloc: Add comments for the *_chan_load() functions.
* osmo_bsc_sigtran: Fix a SSCP-> SCCP typo in a comment
* stats: Add a stats gauge for the MSC links count.
* stats: report a number of configured BTS to a stats gauge.
* stats: Add counters for received BSSMAP messages.
* stats: Export connected OML/RSL links count per BTS.
* a_reset: Rename SIGTRAN connection to BSSMAP MSC assocation in log messages
* stats: Fix Rx DTAP error stat description
* bsc_subscr_conn_fsm: Fix a typo in the comment life->live
* lchan: Allow transition from BORKEN state to WAIT_RF_RELEASE_ACK
* timeslot_fsm: Allow PDCH_ACT_ACK in BORKEN state.
* stats: Only dereference a connection pointer after checking for NULL.
* handover_test: Properly allocate MSC data struct.
* stats: Add counters for Tx BSSMAP messages.
* stats: Rename BSSMAP Rx message counters to match Tx ones.
* bsc_vty: Coding style fix - brackets around a complex if/else
* log: Fix "Paging request failed" logging level
* log: Adjust "new SIGTRAN connection" logging level
* bssmap: Ignore repeated BSSMAP RESET ACK messages.
* log: Demote "CHAN RQD: reason" to INFO
* log: Demote "SAPI=%u ESTABLISH CONFIRM" message from ERROR to DEBUG.
* borken: Recover from more TS borken states.
* stats: Add counters and gauges for BORKEN lchans/TS
* stats: Add a BTS/BSC counter PAGING_NO_ACTIVE_PAGING.
* stats: Correctly count lchans under BORKEN TS.
* bssap: Handle BSSMAP CONFUSION message.
* Fix crash in bsc_patch_mm_info()
* bsc_patch: Don't even parse MM INFO if TZ patching is not enabled.
* bsc_subscr_conn_fsm: Fix crash in gscon_forget_lchan()
* stats: Count paging requests flushed due to MSC Reset.
* Return 0 from gsm0408_rcvmsg() if SCCP link is already closed.
* paging: Remove obsolete comment.
* chan_alloc: Fix typo in a comment.
* timeslot_fsm: Name TS FSM instances on allocation.
[ Daniel Willmann ]
* osmo-bsc: Use designated initializer in bts_stat_desc
* gsm_data.h: Remove period at end of counter description
* abis_rsl: Count successful channel requests
* Count assignment rates per BTS as well
* Remove punctuation in counter description
* Count handover per BTS as well as per BSC
* Count intra-cell and intra-bsc handover separately
* Add bts counters to count BTS events where we don't have a bts
* configure.ac: Require python3 for ext_tests
[ Alexander Couzens ]
* gsm_data: always set spare bits in channel description
* gsm 04.08: encode the LTE neighbors measurement bandwindth in Channel Release
* gsm 04.08: correct calculate the Cell Selection Indicator after release of all TCH and SDCCH
* osmo-bsc: fix a crash when receiving a RACH LOAD IND with 0
* abis_nm: abis_nm_perform_test: fix a potential null deref
* pcu_sock: use tn as variable name to improve readability
* pcuif_proto: protocol 9: add missing fields
* oml: encode IPv6 NSVC using the new OML attribute NM_ATT_OSMO_NS_LINK_CFG
* pcuif_proto: version 10: add frequency hopping parameters
* pcuif_proto: version 10: add support for IPv6 NSVCs
* bsc_vty: cfg_bts_gprs_nsvc_rip: add missing breaks
* bsc_vty: parse the return code to make coverity happy
* bts_ipaccess_nanobts: check if msgb_alloc fails
* sysmobts: expect feature IPV6_NSVC
* Introduce NM GPRS NSVC FSM
[ Michael Iedema ]
* stats: Add granularity to SDCCH/TCH/LU activity.
* stats: Add granularity to chan:rf_fail stat.
* cosmetic: shorten deref chains where possible
* stats: add SIGN/SPEECH assignment subcategories
-- Pau Espin Pedrol <pespin@sysmocom.de> Tue, 23 Feb 2021 18:43:04 +0100
osmo-bsc (1.6.0) unstable; urgency=medium
[ Philipp Maier ]
* bsc_msc_data: remove unused member is_authenticated
* gsm_08_08.c: always pick first msc for unsolicit paging responses
[ Neels Hofmeyr ]
* add vty 'no neighbors' to remove all HO targets
* neighbor config: allow re-using ARFCN+BSIC pairs
* fsm: use deferred deallocation
[ Vadim Yanitskiy ]
* abis_nm.c: use LOGP() macro instead of LOGPC()
* lchan_select.c: tune log level in lchan_select_by_type()
* VTY: also print the active phan config in ts_dump_vty()
* osmo_bsc_main.c: verify the physical channel mapping at startup
* osmo_bsc_main.c: simplify computation of CCCH_CONFIG
* osmo_bsc_main.c: fix CCCH_CONF computation: use pchan_from_config
* abis_nm.c: fix error message in verify_chan_comb()
* abis_nm.c: replace magic numbers with NM_CHANC_* constants
* abis_nm.c: fix RSL connection timeout for trx->nr > 0
[ Harald Welte ]
* Cell Broadcast: CBSP and CBCH scheduling support
* doc: update bsc_vty_reference.xml
* manual: Update statements regarding SCCPlite
* SMSCB: Send ETWS primary warning message via all dedicated channels
* SMSCB: Send ETWS Primary Notifiation via RSL to BTS
* check for osmo_fsm_register() error return value
* check for osmo_ss7_init() error return value
* manual: Fix copy+paste error
* Move a_reset_fsm regstration to __attribute__((contructor))
* exit(2) on unsupported positional arguments on command line
* gsm_04_80: Avoid using deprecated API
[ Pau Espin Pedrol ]
* a_reset.c: Don't wait 2 seconds to send first BSSMAP RESET
* bsc: gsm_08_08.c: Remove repeated conn not null check
* bsc_subscr_conn_fsm: Cleanly clear BSSAP conn if associated channel closed during WAIT_CC
* gsm_08_08.c: Mark func bsc_find_msc() static
* sigtran: Set default remote ip to localhost instead of null
* bsc_vty: Fix typo in 'no depends-on-bts' cmd
* rsl: Send IE MS Power Param during CHAN ACT and MS PWR CTRL messages
* rsl.c: Clean up some repeated use of long chains of pointers
* rsl: Send IE MS Power Param to osmocom BTS models only
* Remove unused API classmark_is_r99()
* gsm_data.h: Remove unused field classmark from gsm_subscriber_connection
* gsm_data.h: Remove unused func declarations
* bsc: Adapt maximum MS Power Ctrl level based on band and MS Power class
* cosmetic: bs11_config: clean trailing whitespace
* bsc: Send MS Power Control msg upon max MS power change
[ Martin Hauke ]
* Fix some typos
[ Oliver Smith ]
* doc: osmux: use generated svg instead of pychart
* debian, osmoappdesc.py, tests: switch to python 3
-- Pau Espin Pedrol <pespin@sysmocom.de> Fri, 03 Jan 2020 18:24:51 +0100
osmo-bsc (1.5.0) unstable; urgency=medium
[ Max ]
* LCLS: constify helper parameters
* LCLS: use libosmocore function to add status
* nanobts: use libosmocore's osmo_store*() for OML attr. patching
[ Philipp Maier ]
* lchan_select: dont allow half rate EFR to be selected
* lchan_select: Do not unsolicitedly select a TCH/F
* bsc_vty: add vty command to display all lchans
* bsc_vty: add features to disable specific lchans via vty
* assignment_fsm: fix channel allocator preferences
* assignment_fsm: use activate.info.s15_s0 for ASS. COMPL.
* handover_fsm: copy old S15_S0 to new lchan
* osmo_bsc_msc: Use meaningful amr rate configuration on BTS level
* codec_pref: fix special handling for AMR rate configuration (S15-S0)
* lchan_fsm: make sure multi rate configuration is valid
* lchan_fsm: do not include 12.2k in active set on HR channels
* AMR: Signal usage of octet-aligned or bandwith-efficient mode to MSC
* lchan_fsm: add missing header file.
* osmo_bsc_bssap: check bssmap length field
* rest_octets: add Serving Cell Priority Parameters
[ Neels Hofmeyr ]
* abis_rsl: Fix TCH-as-SDCCH allocation on Channel Request
* handover_fsm: do not access conn->assignment.req, it may be outdated
* comments: clarify usage of conn.assignment and .handover scopes
* cosmetic: drop unused struct mgcp_ctx shadow
* incoming connect: don't crash if calling addr is missing
* log N-CONNECT from MSC
* Revert "assignment_fsm: Properly support assigning signalling mode TCH/x"
* fix log line end in assignment_fsm.c
* avoid use-after-free: on MGW endpoint dealloc, also forget it in conn->ho.*
* lchan activation: add explicit encryption info to activation
* Handover Request: also parse Chosen Algorithm IE, pass to lchan activation
* fix inter-BSC-HO-incoming for AoIP (1/2)
* use libosmocore osmo_tdef
* move mgw endpoint FSM to osmo-mgw.git
* fix inter-BSC-HO-incoming for AoIP (1/2)
* fix inter-BSC-HO-incoming for AoIP (2/2)
* abis_rsl.c: missing newlines on log lines
* doc/manuals: review and tweak handover docs
* make bsc_clear_request() static
* doc/manuals, vty doc: more handover doc clarifications
* remove double BSSMAP Clear on HO failure
* comment and VTY doc tweaks
* silence error for "invalid enum handover_scope value: none"
[ Harald Welte ]
* gsm_data: Add gsm_bts_name() just like we have gsm_{trx,ts,lchan}_name()
* manual: It's not "A over SCCP" but "BSSAP over SCCP"
* manual: Add sections on 3G/4G neighbor cells
* manual: Re-order chapters in more logical order
* manual: s/OsmoNITB/OsmoBSC/ in examples; remove E1 based BTSs
* manual: Remove bogus "Control interface" sub-section in overview
* Implement CSFB "Fast Return" Handling at RR RELEASE
* OML: Fix encoded length value of OML GET ATTRIBUTES
* Make sure to default to AMR octet-aligned mode
* abis_rsl: Add support for extended CBCH to rsl_sms_cb_command()
* abis_rsl: Avoid "Unimplemented" log message for every CBCH LOAD IND
* abis_rsl: Fix log message about unimplemented common channel msg
* smscb: Allow transmit of SCHEDULE and DEFAULT SMSCB
* chan_alloc: Don't include CBCH channels in load computation
* keep per-BTS stat_items about RACH busy / RACH access percentage
* vty: Dump per-bts stat_item group in 'show bts' output
* Allow VTY to set the CCCH Load Indication Threshold
* rx_fail_evt_rep(): Don't recycle variable
* Re-introduce support for IPA-encapsulated MGCP
* logging: introduce LOG_BTS and LOG_TRX and use it everywhere
* vty: Fix typo in VTY command descrption -> description
[ Pau Espin Pedrol ]
* ipaccess/Makefile.am: Remove unneeded libmgcp-client dep
* Move LCLS references from gsm_data to osmo_bsc_lcls
* Move msc related code from gsm_data to bsc_msc
* ipaccess/Makefile.am: Remove unneeded libosmo-sigtran dep
* net_init.c: remove unneeded header
* configure.ac: Add flag to enable/disable build of ipaccess related utils
* src/utils/Makefile.am: Drop unneeded sigtran and mgcp-client deps
* fix another log line end in assignment_fsm.c
* Drop unused old osmux leftover code
* vty: Add option to enable osmux towards MSC
* bssap: Detect MSC Osmux support on RESET (ACK) recv
* bssap: Announce Osmux support on RESET (ACK) send
* bssap: Parse Osmux CID on BSSAP Assign Req recv and use it in MGCP
* bssap: Feed Assign Complete with Osmux CID retrieved from MGW
* lcls: Fix MDCX with garbage on LCLS loop break
* Introduce msc_is_{sccplite,aoip}() helpers
* bsc: Append Osmux Support IE only on AoIP
* Remove extern declarations of libosmovty symbols
* bsc_subscr_conn_fsm: Use gscon_bssmap_clear() helper on send failure
* bsc_subscr_conn_fsm: Log Tx of BSSMAP Clear Request with cause
* doc: Add Osmux documentation to User Manual
* Remove undefined param passed to logging_vty_add_cmds
[ Sylvain Munaut ]
* assignment_fsm: Properly support assigning signalling mode TCH/x
* assignment_fsm: Properly support assigning signalling mode TCH/x
[ Vadim Yanitskiy ]
* abis_nm.c: use proper format specifiers for BTS / TRX number
* abis_nm.c: also print TRX number in abis_nm_get_attr()
* abis_nm.c: use abis_nm_ipa_magic from libosmocore
* abis_nm.c: use msgb_lv_put() to put abis_nm_ipa_magic
* abis_nm.c: fix broken logging in abis_nm_rx_ipacc()
* gsm_data.c: use REG_NOSUB flag of regcomp()
* osmo_bsc_lcls.c: cosmetic: make Coverity happy
* ipaccess-config: use POSIX regex for Unit ID format check
* handover_fsm.c: fix: prevent possible buffer overflow
[ Daniel Willmann ]
* doc: Add generic counter chapter in manual
* manuals: Fix example config to reflect OsmoBSC commands
* Change comments/strings from OpenBSC to OsmoBSC
* gsm_data.h: Remove unused variable from OpenBSC times
* Revert "fix inter-BSC-HO-incoming for AoIP (1/2)"
* manuals: Update generated VTY reference and counters
* manuals: Add script to update vtr/counter documentation from docker
[ Oliver Smith ]
* debian: create -doc subpackage with pdf manuals
* contrib/jenkins.sh: run "make maintainer-clean"
* contrib/jenkins.sh: "maintainer-clean" after "publish"
* osmo-bsc.cfg: work with osmo-bts example cfg
[ Eric Wild ]
* vty: adjust config name for unit-id
* turn -Werror=null-dereference into a warning
[ Ruben Undheim ]
* Fix some spelling errors found by lintian
-- Pau Espin Pedrol <pespin@sysmocom.de> Wed, 07 Aug 2019 20:42:06 +0200
osmo-bsc (1.4.0) unstable; urgency=medium
[ Neels Hofmeyr ]
* inter-BSC HO: add neighbor_ident API to manage neighbor-BSS-cells
* inter-BSC HO: neighbor_ident API: drop 9bit BSIC
* doc: update/fix FSM charts
* fix / clarify rsl dtap cache
* rename gsm_04_08_utils.[hc] to gsm_04_08_rr
* cosmetic: move RR functions from bsc_api.c to gsm_04_08_rr.c
* add gsm_timers, for Tnnn definitions usable by FSMs
* large refactoring: use FSMs for lchans; add inter-BSC HO
* fix nanobts: timeslot FSM: use flags to remember OML,RSL status
* fix: dispatch TS_EV_RSL_DOWN when losing RSL
* timeslot FSM: fix infinite recursion on failure to send PDCH ACT
* timeslot FSM: permit entering broken state from anywhere
* cosmetic: FSMs: allow ignorable events
* fix BSC_CTR_ASSIGNMENT doc strings
* lchan_fsm: split off lchan_rtp_fsm, establish RTP a bit earlier
* lchan_fsm: add in_release_handler flag
* allocate larger lchans if no SDCCH are available
* create separate logging categories for lchan,ts,as FSMs
* cosmetic: constify gsm_bts_num() net arg
* vty: 'handover any': pick more random chans, use lchan_select_by_type()
* cosmetic: dissolve bsc_api.c
* cosmetic: reduce bsc_api.h
* cosmetic: rename bsc_api.h to gsm_08_08.h
* cosmetic: rename osmo_bsc_api.c to gsm_08_08.c
* cosmetic: gscon: don't re-enter ST_CLEARING
* use __FILE__, not __BASE_FILE__
* fix lchan_rtp_fsm: missing event handling
* MGCP: add 'X-Osmo-IGN: C' for SCCPlite by default
* cosmetic: neighbor_ident_vty.c: add and use common string defs
* neighbor_ident_vty.c: fix CI format, should be 16bit
* inter-BSC HO incoming: continue despite missing Classmark
* inter-BSC HO incoming: drop old/wrong RTP port code
* lchan_fsm: lchan_fail_to(): store target state early
* cosmetic: lchan_fsm failure: log about state transitions
* lchan_fsm: safer 'concluded' flag
* log: lchan_rtp_fsm: add missing '\n'
* log: 'sending BSSMAP HO Request ACK'
* inter-BSC HO: send failure msg directly
* log: tweaks and more context in osmo_bsc_sigtran_send()
* fix dependency bug: include mgcp_client/, not mgcp/
* cosmetic: lchan activ: no need to clear mr again
* cosmetic: lchan activ: drop todo comments
* lchan: pick proper power and ta values
* SCCPlite Assignment Complete: include Speech Codec (Chosen)
* inter-BSC HO incoming: send BSSMAP HO Complete directly
* inter-BSC HO outgoing: fix L3 forwarding
* ho fsm: handle RR HO Failure for inter-BSC outgoing
* lchan_fsm: allow late RTP release events without erroring
* ts,lchan_fsm: do not attempt to allocate CBCH subslots
* Implement RR Classmark Enquiry
* fix LCLS during Assignment: actually use new TCH lchan
* cosmetic: drop param from send_assignment_complete()
* vty: add SCCP related vty commands
* make: allow vty-tests without configure
* test neighbor ident vty docs
* neighbor vty: drop keyword 'add'
* neighbor vty: rather 'no neighbor', not 'neighbor del'
* neighbor vty: allow setting local neighbors by CGI
* vty: write local neighbors by bts nr, not lac-ci
* fix counters for inter-BSC outgoing
* gscon_forget_lchan(): no Clear Request after Clear Command
* gscon_forget_lchan(): Clear Request iff no lchans remain
* subscr conn: properly forget lchan before release
* lchan_fsm: fix failure handling: notify conn when released
* handover_decision_2.c: tweak comments
* handover_decision_2.c: tweak ho candidate logging
* handover_decision_2.c: find_alternative_lchan: drop goto
* handover_decision_2.c: drop redundant debug_candidate() args
* lchan_fsm: notify conn of released lchan upon RF Release
* handover_fsm: adjust inter-BSC HO failure handling to spec
* remote-BSS neighbors: allow only one cell ID
* handover_decision_2.c: refactor trigger_*()
* handover_decision_2.c: implement HO to remote BSS
* abis_rsl.c: fix uninitialized RSL cause issues
* handover_fsm: fix missing newline for log statement
* handover_fsm: fix failure logging of uninitialized chan mode
* fix build: revert bad neighbor_ident.vty change
* vty doc: drop "(HO algo 2 only)" strings
* lchan_fsm_cleanup: drop redundant 'forget_lchan' call
* lchan: rf release: make sure conn is NULL
* dbug log: verbosely detach conn<->lchan
* fix: send RR Release (e.g. after BSSMAP Clear Cmd)
* abis_rsl.c: drop unused enum sacch_deact
* lchan: release in error: fix missing messages / events
* lchan release: always Deact SACCH
* cosmetic: lchan: introduce sub-struct lchan->release.*
* cosmetic: abis_rsl.c: drop uneccesary braces
* lchan: set cause for 4 instances of release_in_error = true
* coverity: gscon_forget_lchan: squelch forward-null
* always directly send BSSMAP Clear Request
* send Immediate Assignment Reject only before Immediate Assignment
* Importing history from osmo-gsm-manuals
* minor tweak
* make clean: also remove generated image files
* add 'make check' target
* OsmoBSC+NITB/running: fix title levels, one too deep
* OsmoBSC: include bts-examples.adoc from OsmoNITB
* fix 'make clean': shell glob, ignore failure
* refactor Makefile build rules, don't use the FORCE
* OsmoBSC: update overview to explain both SCCPlite and SCCP/M3UA
* common / OsmoBSC: drop unused alink.adoc
* OsmoBSC: update VTY reference
* bsc: document handover
* bsc: handover: clarify default of all-cells-are-neighbors
* bsc: handover: mention the need to resend SI for telnet neighbor cfg
* author info: add "former" to Holger's job title
* OsmoBSC: update VTY reference
* follow-up: logging tweak for Immediate Assignment
* set gscon FSM instances' log level to DEBUG
* make sure early lchan act failure resets the lchan
* comments: describe some lchan details
* use mgcp-client configured endpoint domain name
[ Philipp Maier ]
* endpoint_fsm: add missing return in mgcp_pick_codec
* gscon: use BSS-common payload types on BSS side
* sigtran: fix memleak in osmo_bsc_sigtran_send()
* GSCON: avoid sending connection oriented data when not connected
* GSCON: call api of a_reset.c with msc object directly
* lcls: do not LCLS call legs with different codecs
* doc: update mgw settings in example config file
* assignment: remove unnecessary call to gsm0808_speech_codec_from_chan_type()
* codec_pref: fix typo in comment
* codec_pref: add AMR configuration bits to make_scl_config() in unit-test
* codec_pref: fix missing breaks in switch-case statement
* LCLS: fix codec mismatch detection
* gsm_data: remove unused struct member full_rate.
* gsm_data: remove unused struct member chan_mode
* assignment_fsm: only include speech codec (choosen) on AoIP networks
* gsm_data.c: Set reasonable AMR codec defaults in gsm_bts_alloc()
* codec_pref: Add Codec List to COMPLETE LAYER 3 INFORMATION
* lcls: log channel type and lchan names on LCLS codec mismatch
* codec_pref: handle S0-S15 in ASSIGNMENT REQUEST
* gsm_08_08: abort complete L3 3 msg gen when no codecs are set
* osmo_bsc_msc: Set reasonable codec list defaults
* codec_pref: check codec configuration before start
* codec_pref: cosmetic: seperate half/full rate determination
* codec_pref: also check physical channels
* gsm_08_08: allow zero length speech codec lists in compl l3 info.
* gsm_08_08: do not include zero length speech codec list.
* gsm_data: set meaningful default values for amr modes
* codec_pref: also check amr codec rates in check_codec_pref()
* gsm_04_08: improve gsm48_multirate_config()
* bsc_vty: check amr mode parameters
* lchan_fsm: generate proper multirate configuration IE on RSL
* gsm_data: make cgi_for_msc available for other modules
* handover_fsm: send HANDOVER PERFORMED msg on internal ho
* paging: fix nullpointer deref
* chan_alloc: remove references to lchan_alloc()
[ Harald Welte ]
* Migrate from osmo_ipa_idtag_parse() to ipa_ccm_id_resp_parse()
* handover_fsm.c: Fix -Werror=format-security errors
* cbch: Don't send cell-broadcast command on BTS without CBCH channel
* gsm48_lchan2chan_desc() belongs to gsm_data.h
* Introduce gsm48_lchan2chan_desc_as_configured()
* CBCH: Fix SI4 CBCH IE generation
* CBCH: Fix gsm_bts_get_cbch()
* nanoBTS: Allow BCCH with CBCH on TS0
* range_enc_determine_range(): Don't dereference array on size=0
* handover_start_inter_bsc_in(): Uninitialized variable
* ipaccess-config: Fix open() return value checking
* bssmap_handle_cipher_mode(): Don't sent reject if !conn
* subscr_conn_fsm: Fix null-pointer deref / N-CONNECT.ind from unknown MSC
* acc_ramp: An unsigned int is always >= 0
* ipaccess-proxy: Add error handling to IAP CCM ID RESP parsing
* initial checkin of manuals to public repo
* Add link to Asciidoc source code of manual
* add Ericsson OM2000 message sequence charts (one for each MO)
* OM2000 message sequence charts: specify MO in node name
* OM2000 MSC: Fix spelling
* Add chapter on Cell Broadcast Support in Osmocom (to BSC+NITB manual)
* BSC: Add series of message sequence charts about MGCP handling
* mgw: Fix endpoint names for new MGW
* MGW: Include MGCP endpoint naming scheme of old IPA/SCCPlite approach
* add message sequence chart MS/BTS/BSC/MSC for 3GPP aoIP MO call
* vty-ref: Update URI of docbook 5.0 schema
[ Pau Espin Pedrol ]
* bsc: Use libosmocore API to track osmo_signal structs
* abis_nm: Fix heap-use-after-free in abis_nm_set_channel_attr
* abis_nm: Fix trailing whitespacing
* Fix heap-use-after-free due to OML link destruction
* abis_nm_ipaccess_rsl_connect: Log bts and trx nr
* codec_pref: Log unsupported codec name used
* codec_pref: Log HR2 specifically as never specified
* codec_pref.c: Add comment in expected switch case without break
* Install systemd services with autotools
* Install sample cfg file to /etc/osmocom
* osmo-bsc: Add default case for switch(enum)
* abis_nm_get_ts: Return TS of correct TRX, not always TRX0
* ipaccess-config: Use enum value for OML IP
* abis_nm: Rename m_id_len to ease review of forthcoming patches
* abis_nm: Split handling of Attribute Response Info into its own func
* abis_nm: Split reported attr list parsing from Attribute Response Info into its own func
* abis_nm: Allow sending and receiving Get Attributes (Response) against nanoBTS
* abis_nm: Add support to parse some nanoBTS Attribute Response attributes
* abis_nm: Add support to parse OML IP and Unit Id in Get Attributes
* abis_nm: Support parsing nanoBTS format for Get Attributes Info
* abis_nm: parse_attr_resp_info_unreported: Fix offset calculation
* examples: Remove neighbor-list invalid for default setup
* bsc: bts_alloc: Use enum value during neigh_list_manual_mode initialization
* bsc: vty: Use enum value in neighbor-list check
* bsc: gsm0808: Fix return code in bsc_compl_l3
* osmo-bsc: gsm_timers_vty: Set global T_defs during vty_init
* bsc: Prefix log string with related SI type during call to list_arfcn
* bsc: si: Fix SI2bis L2 pseudo length
* bsc: si: Fix SI2ter L2 pseudo length
* bsc: Enable force-combined-si on nanoBTS by default
* bsc: band_compatible: Return band non-compatible for invalid arfcn
* bsc: vty: Verify and warn on invalid arfcn passed
* abis_nm: Introduce new signal S_NM_GET_ATTR_REP
* ipaccess-config: Fix whitespace
* ipaccess-config: Add -G cmdl opt to query OML IP and Unit ID
* ipaccess-config: cosmetic: Remove unneeded comment with hex values
* gsm0408_rcvmsg: Release lchan if L3 fails to complete
* ipaccess-config: Introduce -q quiet param
* Add osmux-reference document
* osmux-reference: Use packetdiag to draw packet header structures
* osmux-reference: Add sequence charts
* osmux-reference: Add traffic saving plot
* osmux-reference-docinfo: Add latest changes to revhistory
* osmux: Fix description for Dummy frames FT field
* Allow easily disabling GFDL references
* cosmetic: bsc: timeslot_fsm: Clean uneeded scope brackets
* bsc: lchan_select: Avoid returning a TCH/H lchan when TCH/F is requested
* bsc: ts_as_pchan_for_each_lchan: reorder and improve documentation
* bsc: ts_for_each_lchan: Improve documentation
* bsc: Add define for ts_as_pchan_for_each_lchan with ts->pchan_on_init
* bsc: Fix lchan iteration for dyn TS during PDCH Deact
* bsc: timelost_fsm: Remove unneeded set of out variable on failure
* bsc: timeslot_fsm: Fix ts_is_lchan_waiting_for_pchan
* bsc: ts_is_pchan_switching: Return correct IPA dyn TS target_pchan
* bsc: timeslot_fsm: Fix possible skip of some lchans in ts_terminate_lchan_fsms
* bsc: timeslot_fsm: Fix count in ts_lchans_waiting
* bsc: lchan_rtp_fsm: Avoid duplicate LCHAN_EV_RTP_RELEASED event
* bsc: lchan_fsm: Add missing transition WAIT_TS_READY->WAIT_RLL_RTP_RELEASED
* bsc: timeslot_fsm: Handle and ignore tear down of lchan during PDCH DEACT
* bsc: lchan_fsm: Fix invalid duplicated transition
* paging: Add VTY options to calculate T3113 timeout dynamically
* paging: fix whitespace
* paging: Properly enclose logging imsi filter scope
* bsc_main: filter_fn: Compare imsi values instead of subscr pointers
* bsc: Set subscr log context during complete_layer3
* bsc: rsl: Set subscr log context during meas report
* bsc: dtap: Set subscr log context
* bsc: bssap: Set subscr log context during paging
* Add VTY option to avoid sending empty Full BCCH Info for disabled SI
[ Stefan Sperling ]
* check for overlong unix socket paths
* fix unaligned access in abis_nm_rx_ipacc()
* re-order condition checks for clarity
* show dynamic timeslot details in 'show timeslot' vty command
* check return value of gsm48_multirate_config()
* add missing 'break' in switch statement
* unlink socket path correctly in rf_create_socket()
[ Martin Hauke ]
* cosmetics: Fix typo in bsc_vty.c
* ipaccess-config: Generate valid JSON output when using the -G parameter
* ipaccess-config: Fix indentation of the usage output
[ Oliver Smith ]
* osmo_bsc_main.c: initialize rate counters
* vty 'show bts'/'show trx': display IPs and ports
* cosmetic: fix spec ref for gsm0808_cipher_mode()
* cipher mode reject: send proper cause codes
* vty: add 'show rejected-bts'
* ipaccess_sign_link_reject: fix: use osmo_strlcpy() to safely copy IP
* copy NITB's osmobsc-usermanual.adoc to OsmoBSC
* build manuals included from osmo-gsm-manuals.git
* Fix DISTCHECK_CONFIGURE_FLAGS override
* contrib/jenkins.sh: build and publish manuals
* contrib: fix makedistcheck with disabled systemd
[ Daniel Willmann ]
* debian: Require libcdk and install meas_vis osmo-bsc-meas-utils
* OsmoBSC/HLR/MSC: Fix default config file name
* gsm_04_08: Free GSM subscr conn if paging response can't be matched
* VTY: Allow logging filter imsi statements for IMSIs we haven't seen yet
[ Max ]
* vty: don't show GPRS details if not configured
* LCLS: move MGCP MDCX into separate function
* Make IP address helper accessible via header file
* constify rsl_tx_ipacc_*cx() parameters
* LCLS: expand logging to print the name of the mode in use
* LCLS: tighten GCR check
* LCLS: explicitly check for mode before closing the loop
* LCLS: move mode check into separate function
* LCLS: make config and control redable in 'sh conns'
* RSL: restructure MDCX functions
* LCLS: add bts-loop variant
* vty: add command to show TRX selectively
* Add OsmoBSC control interface description
* Add OsmoBSC control interface description
* OsmoBSC: update CTRL docs
* LCLS: update parameter representation
* LCLS: log config/control update
* IPA: log OML/RSL link drop reason
* LCLS: use enum values instead of magic numbers
* Print BTS number on GPRS options error
* Log MDCX ACK for established lchan
[ Jonathan Brielmaier ]
* fix various typos across all manuals
[ Ivaylo Kostov ]
* BSC,BTS: add diagrams of PCU-BTS-NITB-SGSN relationships
[ Alexander Couzens ]
* OsmoBSC: add rate counter documentation
[ Vadim Yanitskiy ]
* osmo_bsc_bssap.c: fix incorrect link_id assignment
-- Harald Welte <laforge@gnumonks.org> Sun, 20 Jan 2019 21:21:24 +0100
osmo-bsc (1.3.0) unstable; urgency=medium
[ Philipp Maier ]
* a_reset: cleanup + remove dead code
* gscon: remove dead code
* gscon: pick suitable payload type / encoding name for MGCP
* lcls: set codec info when performing MGW operation
* codec_pref: move match_codec_pref() to separate c-file and add unit-test
* codec_pref: check bts codec support
* chan_alloc: reset rtp voice related bits in lchan_free()
* rsl: use 3GPP assigned payload type constants from libosmo-netif
[ Stefan Sperling ]
* show all global counters of osmo-bsc in vty
* add counter for connection attempts from BTS with unknown unit id
* fix misaligned memory write access in abis_nm_ipaccess_rsl_connect()
* increment 'paging responded' counter for active paging only
* fix handling of invalid pchan names in vty
[ Pau Espin Pedrol ]
* nat: Add jitter buffer on the uplink receiver
* acc_ramp: Increase log level of some messages
* chan_alloc: Print bts nr on chan alloc failure
* abis_rsl.c: Fix whitespace
* abis_rsl: rsl_rx_chan_rqd: Format bts log string as in everywhere else
* pcu_sock: Log event pcu_sock created
* osmo-bsc: Clean help description of cmd line parameters
* osmo-bsc: Add -V param to print version
* debian: Move meas related binaries into new package osmo-bsc-meas-utils
* bsc-filter: Remove unused func barr_adapt and set barr_find static
* bsc_vty: Write access list entries when storing bsc config
* Init access_lists before passing it as a parameter
* Rename bsc_msg_acc_lst_vty_init to have more uniform prefix
* filter: vty: Print policy list in cmd show access-list
* filter: Replace '.' in counter names with ':'
* filter: Allocate each ctr group with a different idx
* ctrl: Avoid sending back received ERROR msgs
[ Neels Hofmeyr ]
* bsc_api.c: actually log with context
* abis_rsl.h: drop unused rsl_chan_activate() declaration
* cosmetic: bsc_dyn_ts.c: make local functions static
* cosmetic: define TCH_F_PDCH_PENDING_MASK as actual bitwise or
* cosmetic: logging and ordering in handle_ass_compl()
* doc: add msc charts on Assignment/Handover internals
* tests: remove bssap_test
* tests: remove channel_test
* bsc_test: drop "scan to MSC" code path
* dissolve libbsc: move all to src/osmo-bsc, link .o files
* remove struct bsc_api
* cosmetic: magic number: use RSL_ACT_ constant for chan act
* cosmetic: gscon: undup code: add common assignment_failed()
* assignment: signal assignment failure on chan act nack
* log: fix logging in rsl_rx_chan_act_nack()
* log: assignment: add two logs on unexpected lchan release
* use libosmocore's gsm0808_permitted_speech(), gsm0808_chosen_channel()
* cosmetic: penalty timers: constify, tweak doc
* cosmetic: bsc_subscr_alloc: log initial get
* gscon: put subscriber a little later
* try to pick up subsrc IMSI on l3-compl
* store subscriber identity on paging
* cosmetic: handover_test: add IMSI to subscr for logging
* doc: tweak msc charts on Assignment/Handover: act_timer
* doc: add lchan-release.msc
* doc: add ms-channel-request.msc
* doc: charts: illustrate new plan for ts and lchans
* cosmetic: gscon: drop odd use of OSMO_STRINGIFY
* HO: introduce T7, T8, T101 timers
* drop dead code: conn->T10, handled by gscon instead
* make T10 configurable like the rest of them
* fix dyn TS init: properly identify BTS on OML OPSTART ACK
* cosmetic / linking: move str_to_imsi() out of abis_rsl.c
* cosmetic: name osmo-bsc's root ctx 'osmo-bsc', not 'openbsc'
* call osmo_xua_msg_tall_ctx_init()
* fix handover start: dealloc ho if event not permitted
* ho cfg: fix unit strings
* hodec2 log: less verbose, more concise logging
* various logging: fix missing/extra newlines
* BTS codec pref legacy compat: allow all codecs per default
[ Harald Welte ]
* bsc: Fix check for MSC-side FSM allocation failure
* vty: Permit selection of other ASP protocol than M3UA
* bsc: Add mgcp_port_to_cic() to determine CIC from RTP Port
* bsc: Use correct MGCP endpoint name for IPA/SCCPlite
* bsc: Don't reject ASSIGNMENT for Audio in IPA/SCCPlite case
* bsc: Don't include AoIP IEs in ASSIGNMENT COMPLETE over SCCPlite
* bsc: Don't create MSC-side MGCP connection in IPA/SCCPlite case
* remove remaining bits of osmo-bsc_nat
* Remove 'struct bsc_msc_connection' + fix IPA-encapsulated CTRL
* move 'extern struct gsm_network *bsc_gsmnet" to header file
* VTY: Print some more information in "show conns"
* Add initial 3GPP LCLS support to OsmoBSC
* LCLS: add VTY config to enable/disable LCLS on per-MSC basis
* Reject ASSIGNMENT REQ with CIC but no AoIP transp addr in AoIP case
* Ignore "dest" command in MSC node
* Explicitly register CTRL-over-IPA callback with libosmo-sigtran
* Remove unused logging subsystems DCC and DMGCP
* remove traces of osmo-bsc_nat in python test (osmoappdesc/test_runner)
* Add missing event string name for GSCON_EV_LCLS_FAIL
* bsc_subscr_conn_fsm: BSC must not release SCCP connection
* absi_rsl: Fix segfault in rsl_rx_conn_fail()
[ Daniel Willmann ]
* git-version-gen: Don't check for .git directory
-- Pau Espin Pedrol <pespin@sysmocom.de> Fri, 27 Jul 2018 19:25:05 +0200
osmo-bsc (1.2.1) unstable; urgency=medium
[ Philipp Maier ]
* bsc_api/GSCON: prevent unnecessary channel mode modifications
[ Neels Hofmeyr ]
* resurrect meas_feed.c: vty, vty-test
* dyn ts, bts_ipaccess_nanobts.c: init PDCH on Chan OPSTART ACK
* dyn TS, assignment: set lchan state to LCHAN_S_ACT_REQ in the proper place
* dyn TS, assignment: allow switch from PDCH with associated conn
* dyn TS: init only when both RSL and the Channel OM are established
* dyn TS: allow any pchan type changes, fix for gprs mode none
* debug log: verbosely log all lchan alloc choices
* deprecate dyn_ts_allow_tch_f and by default allow all TCH
* fix default fallbacks in audio_support_to_gsm88()
* log: indicate hr/fr in audio_support_to_gsm88() error
* cosmetic: dyn ts init: undup logging for gprs = none
[ Vadim Yanitskiy ]
* osmo_bsc_vty.c: fix: write MGW configuration
-- Pau Espin Pedrol <pespin@sysmocom.de> Tue, 15 May 2018 14:10:38 +0200
osmo-bsc (1.2.0) unstable; urgency=medium
[ Neels Hofmeyr ]
* vty: skip installing cmds now always installed by default
* bssap: paging: page entire BSS for unimplemented cell id list
* fix build: bssap test broke by undefined references
* osmo-bsc RESET FSM: use distinct struct names
* osmo-bsc: SCCP addrs: default only if unset, reject invalid
* osmo-bsc vty: be fatal for addressbook entry errors
* use osmo_sccp_inst_addr_name() instead of looking up ss7
* add --enable-sanitize config option
* bsc_init: fix Werror: define rc for 2quater with si2q_count == 0
* bsc filter: don't ignore imsi-allow on "global" filter level
* compiler warnings: drop some unused variables
* compiler warnings: constify in abis_nm.c
* cleanup: drop unused gsm_bts.role
* compiler warnings: add includes in abis_rsl.h, gsm_data_shared.h
* cosmetic: handover.h: use "#pragma once", declare structs, comments
* examples: add osmo-bsc-minimal.cfg
* HO prep: pass gsm_network to gsm_bts_alloc() already
* fix segfault upon release paging on BSSMAP Reset: init llist
* log typo fix in gsm0808_cipher_mode()
* debug log: log Cipher Mode info upon sending down RSL/A-bis
* fix bssmap_handle_cipher_mode()'s encryption decision
* abisip-find: add getopt option parsing in preparation for a new option
* abisip-find: add -l to list base stations instead of streaming replies
* abisip-find: update copyright
* abisip-find: add timeout option
* abisip-find: add --interval option
* vty: fix 'show lchan ...' arg [lchan_nr] to [<0-7>]
* vty: change handover command's arg LCHAN_NR to <0-7>
* vty: cosmetic: use common BTS, TRX, TS, LCHAN strings
* vty: add various manual handover and assignment trigger commands
* osmo_bsc_mgcp: cosmetic: introduce mgcp_init(), soak up fsm init
* HO: fix recovery from failed handover
* HO prep: introduce per-BTS handover config, with defaults on net node
* HO: add indicators for inter-cell and async ho, use for chan act type
* cosmetic: explicitly init ho_ref start value
* fixup: neigh_meas_avg: detect invalid window size as <=0, log if invalid
* fixup: neigh_meas_avg: fix condition to reduce window size
* HO: enable handover by initializing at startup; rename init function
* HO: add handover algo 2 parameters; skip HO 1 if HO 2 is configured
* HO: rename gsm_bts_neighbor() to bts_by_arfcn_bsic()
* HO: make bts_by_arfcn_bsic() public
* libcommon: eliminate bsc_version.c
* libcommon: eliminate common_vty.c
* libcommon: eliminate debug.c
* libcommon: eliminate socket.c
* libcommon: eliminate talloc_ctx.c
* ipaccess-proxy: don't redefine tall_bsc_ctx
* libcommon: join gsm_data_shared.* into gsm_data.*
* drop libcommon completely, move remaining files to libbsc
* libcommon-cs: move a_reset.c into libbsc
* libcommon-cs: move gsm_network_init() into bsc_network_init()
* gsm_network: drop unused trans_list
* libcommon_cs: move gsm48 bits to libbsc
* libcommon-cs: move vty bits to libbsc/bsc_vty.c
* common_cs.h: mv gsm_encr to gsm_data.h
* drop libcommon-cs completely
* drop unused common.h
* gsm_network: drop unused subscr_epxire_timer
* vty: 'show bts': write '(none)' if none are found.
* vty: 'show bts': fix indenting
* bts chan_load: ignore unusable BTS
* handover_logic.c: always do inter-cell channel activation
* handover_logic.c: on HO command, send new lchan's MS power
* HO: process_meas_rep: guard against modulo zero
* HO: cosmetic: bsc_handover_start(): "fix" memcpy for AMR config
* HO: add new_lchan_type arg to bsc_handover_start()
* HO: cosmetic: bsc_handover_start_lchan_change(): tweak local vars
* HO: always do async handover
* HO: bsc_handover_start_lchan_change(): set MS to max power on handover
* HO: logging: more logs, and more concise logging
* HO: move penalty timers to own file as proper API
* HO: store speech codec list from BSSMAP Assignment in conn
* HO: cfg: tweak vty write
* vty: 'show bts': list the TRXs' ARFCNs
* vty: 'show bts': print neighbor cells
* HO: cfg: separate hodec1 from hodec2 parameters
* HO: lchan: store last seen measurement report nr, tweak log
* HO: clearly mark conn penalty timer member for hodec2
* HO: cosmetic: handover_decision.c: make process_meas_rep() return void
* HO: introduce ho decision callbacks
* HO: cosmetic: getting a chan activ nack on a non-ho lchan is not an error
* HO: Implement load based handover, as handover_decision_2.c
* HO: vty: rename ho decision 1 vty to 'handover1' with 'handover' alias
* cosmetic: adjust copyrights on handover_cfg.c,_vty.c
* HO: vty: clearly mark 'handover foo' as legacy alias for 'handover1 foo'
* drop unused libbsc/meas_proc.c
* HO: fix minor issues found by coverity
* bsc_api.c: fix log string format
* fix build: gprs_ra_id_by_bts(): ensure to init all values
* compiler warning: chan_compat_with_mode(): clearly handle all enum vals
* add test for gsm48_ra_id_by_bts()
* add test for abis_nm_ipaccess_cgi()
* ctrl_test_runner: add tests for 3-digit MNC
* gsm48_ra_id_by_bts(): struct gsm48_ra_id* instead of buf
* cosmetic: bsc_network_init(): imply default 001-01 PLMN
* implement support for 3-digit MNC with leading zeros
* gsm48_parse_meas_rep(): set num_cell=0 if no neighbor cells are reported
* cosmetic: hodec2: log nr of neighbors in meas report
* cosmetic: typo in log: handover_decision2.c: 'measuements'
* handover_test: explicitly wrap abis_rsl_sendmsg()
* pcu_if: implement support for 3-digit MNC
* configure: add --enable-werror
* cosmetic: abis_nm: use osmo_cell_global_id, parse 3-digit MNC
* fixup: apply mnc3 change also in ipaccess/network_listen.c
* vty: drop unused vty definitions (*_NODE, msc_*)
* gsm0408_test: drop LAI encoding test
* range_enc_arfcns: avoid runtime error on zero size
* fix gsm0408_test: properly free bts struct after each test
* move init from gsm_bts_alloc_register() to gsm_bts_alloc(); fix gsm0408_test
* cosmetic: gsm0408_test: drop unused arg from bts_init()
* ctx cleanup: use non-NULL talloc ctx for osmo_init_logging2()
* vty: re-add 'timeout-ping' and 'timeout-pong' as dummy commands
* resurrect meas_feed.c from openbsc.git history
* resurrect meas_feed.c: make it compile, add logging
[ Max ]
* Check OML state per-BTS
* OML: consider administrative state when reporting
* cosmetic: remove obsolete ROLE_BSC
* cosmetic: tighten function type signatures
* cosmetic: drop unused include
* cosmetic: mark gsm_objclass2mo as static
* OML: expand status reporting checks
* Generate SI2ter Rest Octets
* Generate SI2bis Rest Octets
* Fix tests after rate_ctr change
* Remove unneeded .py scripts
* Enable sanitize for CI tests
* Migrate from OpenSSL to osmo_get_rand_id()
* Add optional profiling support
* Fix .deb builds
* Check and handle SMS encoding failure
* Remove obsolete ./configure option
* cosmetic: remove duplicated code
* RSL: print link state per-TRX
* vty: fix OML link state printing
* cosmetic: log prim operation as text
[ Philipp Maier ]
* mgcp: use osmo-mgw to switch RTP streams
* cosmetic: remove distracting newline
* cosmetic: reorder case list
* cosmetic: replace term MGCP-GW with MGW
* mgcp: add missing out state
* mgcp: remove unused variable
* reset: remove name variable from reset context
* doc: add example configuration for osmo-mgw
* auth: remove obsolete VTY commands
* bssap: remove libosmo-legacy-mgcp dependancy
* sccp-lite: remove obsolete VTY commands
* auth: remove unused structs
* auth: remove obsolete VTY commands
* mgcp: use hexadecimal digits in endpoint names
* mgcp: use mgw assigned connection identifiers
* mgcp: add missing switch case
* mgcp: do not fail silently on snprintf()
* cosmetic: remove duplicate logging
* cosmetic: do not cast void pointer
* cosmetic: add missing log prefix
* cosmetic: correct sourcecode formatting
* cosmetic: use fsm pointer from parameter list
* mgcp: cosmetic fixups
* paging: paging_flush_bts: be sure pending_requests is initalized
* cosmetic: osmo_bsc_mgcp: improve comments
* mgcp: cancel transactions on timeout
* mgcp: validate rtp connection data in MGW response (ip/port)
* mgcp: log file and line of calls to handle_error()
* cosmetic: mgcp: remove duplicate logging
* abis_rsl: permit first EstablishInd only on SAPI=0
* abis_rsl: do not allow SACCH in MF mode on SAPI=0
* SIGTRAN: correct wrong log category
* bsc_api: drop unknown RR messages.
* paging: page all bts when no cell is associated
* paging: fix paging attemt rate counter
* a_reset: Add FSM event names
* gsm_data: use feature list from libosmocore
* bsc_vty: display bts features in show bts
* cosmetic: remove unused enum members
* cosmetic: fix typo
* cosmetic: fix argument order of forward_dtap()
* cosmetic: remove needless fixme note.
* cosmetic: fix incomplete sentence in comment.
* Cosmetic: fix missing semicolon after osmo-assert
* cosmetic: remove dead code and obsolete fixmes
* cosmetic: remove old, already commented-out code
* ipaccess: make ipaccess-config build again
* bs11: make bs11_config build again
* cosmetic: remove dead code: osmo_bsc_reset.c
* gscon: fix illegal state transitions
* cosmetic: remove dead code
* cosmetic: Add fixme note for OS#3112
* inform A-RESET FSM about MSC CR timeouts
* gscon: fix assignment of signalling channels
* cosmetic: Add note about libosmo-legacy-mgcp to configure.ac
[ Harald Welte ]
* debian: Add dependency to libosmo-mgcp-client-dev
* debian: Increase required libosmo-legacy-mgcp-dev version
* configure.ac/debian: Require libosmo-mgcp-client-dev >= 1.2.0
* osmo-bsc: Print NOTICE message on unimplemented BSSMAP UDT
* Move many counters from BSC-global to per-BTS granularity
* rate_ctr: Use ':' as separator, not '.'
* Remove 'msc' counter group from BSC
* Change T3101 default from 10s to 3s.
* paging.c: add more documentation on what the functions actually do
* paging: Remove obsolete paging call-back support
* paging: Stop all paging if MSC sends us BSSMAP RESET
* Fix per-BTS counter group index
* libbsc: paging: more reasonable (and detailed) paging statistics
* Reduce T3113 default from 60s to 10s
* Add per-BTS rate_ctr for total + failed number of RSL CHAN_ACT
* Add new per-BTS "rsl:unknown" counter to count unknown RSL messages
* Add a new counter "rsl:ipa_nack" to count number of IPA related NACKs
* Add new "chan:mode_modify_nack" counter to count RSL MODE MODIFY NACK
* Remove dead code left over from NITB split
* Remove unused RRLP options/codec
* Remove bogus vty config for LU reject cause
* Remove bogus MM INFO configuration
* Remove some more dead code
* remove libosmo-sccp dependency for osmo-bsc
* osmo_bsc_bssap.c: Spelling fixes in comment
* Remove unused struct osmo_bsc_sccp_con member sccp_queue_size
* osmo_bsc.h: document every field in 'struct osmo_bsc_sccp_con'
* osmo-bsc: Move user plane/voice related bits into sub-structure
* gsm_data.h: Document all fields of gsm_subscriber_connection
* remove unused 'lac' member of 'struct gsm_subscriber_connection'
* BSC: Add "show subscriber all" command
* BSC: Fix bsc_subsc leak on paging
* bsc_test.c: Use proper network/bts/lchan structures
* cosmetic: Hide all accesses to conn->bts behind conn_get_bts()
* Reduce T3109 default from 19s to 5s
* Make libcommon, libcommon-cs, libfilter, utils depend on mgcp/sigtran
* cosmetic: Remove data/len variables in bssmap_handle_assignm_req()
* bssmap_handle_assignm_req(): Decode channel type as first step
* remove obsolete gsm_subscriber_connection.bts member
* update.gitignore with 'tags' files and 'deps' directory
* gsm_data_shared.h: Remove unused sacch_deact member field
* vty: print RTP IP of lchan if actually bound; print remote (mgw) IP
* osmo-bsc: Add talloc context introspection via VTY
* Structural reform: Get rid of osmo_bsc_sccp_con
* vty: Permit codec-list containing both full-rate and half-rate codecs
* logging: Remove obsolete log categories
* Permit set of multiple different A5 ciphers
* bssmap_handle_assignm_req(): Use proper cause values
* bssmap_handle_assignm_req(): Use more conscise error/log message texts
* bssmap_handle_assignm_req(): Don't print log statemens in malloc failure case
* chan_compat_with_mode: signalling works over all channel types
* osmo-bts/nanobts: Set RACH_Busy Threshold to -90 dBm
* Align syntax of "handover" + "assignment" command with that of lchan act/deact
* Revert "Generate the S_L_INP_TEI_UP signal earlier."
* bsc_vty: Merge more VTY documentation string #defines
* sysinfo: Fix regression causing missing L2 Pseudo-Length in SI5/SI6
(Closes: #3059)
* introduce an osmo_fsm for gsm_subscriber_connection
* cosmetic: Fix infinite number of formatting errors in gscon_fsm_states
* abis_nm: Improve and fix OML logging
* paging: Unify formatting of log messages with (bts=%d) prefix
* RR: Send RR STATUS in case of unsupported/unknown message
* BSSAP: Fix test_codec_pref() implementation for AMR
* BSSAP: document match_codec_pref() more thoroughly
* GSCON FSM: Fix argument order when calling gsm0808_assign_req()
* bssmap: State correct speech codec in ASSIGNMENT COMPLETE
* Start Dynamic PDCH Initialization after RSL is up
* "show timeslot": Show dynamic PDCH state also for Osmocom-style dyn PDCH
[ Alexander Couzens ]
* debian: remove doublicated project name in example files
* use _NUM_CHREQ_T to define the size of ctype_by_chreq
* pcuif_proto.h: fix whitespaces and indention
* pcuif_proto.h: add features of version 7 (txt indication)
[ Pau Espin Pedrol ]
* tests: Fix selection of python version
* Use type bool for boolean fields in gsm48_si_ro_info
* vty: Add cmd to configure 3g Early Classmark Sending
* cosmetic: bsc_vty: Fix trailing whitespace
* cosmetic: bsc_vty: Document bvci reserved values
* osmo_bsc_bssap.c: Fix discard of const qualifier in assignment
* debian: Move abisip-find from osmo-bsc to its own package
* abisip-find: Add option to bind to a specific source address
* abisip-find: Force stdout buffer flush
* abisip-find: Add --format-json option
* ipaccess-config: Enable logging all categories to print errors
* ipaccess-config: Add missing path with log error
* ipaccess-config: Improve handling of last parameter
* abisip-find: Improve use information output
* ipaccess-config: Check cmdlie arg unit-id format
* bsc_api.c: bsc_handle_lchan_signal: Remove unused variable
* bsc_subscr_conn_fsm.c: Fix wrong param list passed to LOGPFSML
* tests: handover_test.c: Add missing header
* pcu_sock.c: Avoid breaking strict-aliasing on ptr derreference
* contrib: jenkins.sh: Add --enable-werror flag
* contrib: osmo-bsc.service: Update description
* contrib: osmo-bsc.service: Fix osmo-mgw.service dependency
* libbsc: nokia_site: Fix uninitialized return val
* bsc_vty: Fix uninitialized var false positive on gcc 7.3.1
* paging: paging_request_bts: Fix wrong return value
* bssap: Log non handled paging requests
* libbsc: set_net_mcc_mnc_apply: Fix memleak on parsing incorrect mcc mnc
* bsc_nat: ctrl: fix memleak on reply receival
* bsc_nat: forward_to_bsc: remove one level of indentation
* bsc_nat: forward_to_bsc: Fix memleak on send failure
* bsc_nat: Drop redundant ccon ptr in bsc_cmd_list
* bsc_nat: ctrl: Fix crash on receveing bsc reply
* use osmo_init_logging2
* chan_alloc.c: Fix log var formatting issues
* abis_rsl.c: abis_rsl_rx_cchan: Print msg type name for unimplemented messages received
* abis_rsl.c: Clean ericsson specific imm assign code
* gsm_data_shared.h: Remove unused enum gsm_paging_event
[ Stefan Sperling ]
* Fix "CTRL GET msc_connection_status" response.
* Support control connection status query for a particular MSC.
* Implement support for paging by LAI.
* Add TAGS files (produced by 'make tags') to .gitignore file.
* Implement support for CELL_IDENT_NO_CELL.
* Implement support for paging based on CI (cell identifier).
* Move BTS selection for paging from osmo_bsc_grace.c into osmo_bsc_bssap.c.
* Implement support for paging based on a Cell Global Identifier.
* Implement support for paging based on LAC and CI.
* Show the BTS number for outgoing paging commands in debug log.
* Split paging cases in bssmap_handle_paging() off into helper functions.
* Remove an unused variable.
* Improve an error message in page_lai_and_lac()
* Make "waiting indicator" of IMMEDIATE ASSIGN REJECT dynamic.
* Add stat items for the BTS's channel load average and T3122.
* Make RSL connection attempts time out.
* fix handover_test link error
* Add support for Access Control Class ramping.
* Generate the S_L_INP_TEI_UP signal earlier.
* use libosmocore to parse cell identifiers in osmo-bsc
* fix an error message in bssmap_handle_paging()
* change return type of page_subscriber() to void
* Generate the S_L_INP_TEI_UP signal earlier.
* fix a format string error in bts_update_t3122_chan_load()
* fix initialization of acc ramping
* only log actual access control class ramping changes
* ensure that acc_ramp_init() is only called once
* trigger acc ramping based on trx rf-locked state
* rename helper functions in the acc ramp code to avoid confusion
* trigger acc ramping on state-changed-event reports
* only trigger acc ramping if trx 0 is usable and unlocked
* fix handling of state changes in acc ramping
* properly skip paging is OML link is down
* extend documentation of paging_flush_bts()
* flush paging when RSL link is dropped
[ Vadim Yanitskiy ]
* bsc/gsm_04_80.h: use '#pragma once' instead of includes
* bsc/gsm_04_80.h: clean up useless declarations
* libbsc/bsc_vty.c: prevent uninitialized access
* doc/examples: use NECI = 1 by default
[ Ivan Kluchnikov ]
* handover_decision: Fix condition for power budget handover attempt
* handover_decision: log HO causes more accurately
[ Andreas Eversberg ]
* HO: Send Channel Mode and Multirate IE along with handover command
* HO: Add function to count currently ongoing handovers to a given BTS
* Fix: If paging for half rate was requested, use hr, if supported by MS
* HO: Assign SDCCH on channel request
* Fix of checking TCH rate at chan_compat_with_mode
* HO: Count the actual meas.rep. get_meas_rep_avg fails if not reached
* HO: Count neighbor measurements and reduce window of neigh_meas_avg
* HO: Changed availablilty of ts_is_usable() from static to extern
* HO: Always update rqd_ta after receiving measurement report
* HO: If handover logic is used to do assignment, signal assignment result
* HO: Add handover decision debugging category
* Do not perform assignment, if the new channel equals the current one
* Allow assignment to TCH channel with signalling only mode
* Correctly set T3105 for ipaccess BTS type
* HO: fix: increase the number of measurement report history to 10
* HO: Change debug category at handover decision: DHO -> DHODEC
* HO: Count number of free timeslot on a given BTS
* HO: add queue to cache DTAP messages during handover/assignment
* Fix: meas_rep.c will only use valid DL measurement reports
* HO: Add a penalty timer list to the subscriber connection entity
[ Keith ]
* Cosmetic: Fix typo: Siganlling->Signalling
-- Pau Espin Pedrol <pespin@sysmocom.de> Thu, 03 May 2018 18:40:11 +0200
osmo-bsc (1.1.2) unstable; urgency=medium
* Debian: depend on libosmo-sigtran (bsc) and libosmo-sccp (bsc-nat)
* debian/control: Specify versions of packages we depend upon
-- Harald Welte <laforge@gnumonks.org> Sun, 29 Oct 2017 09:03:33 +0100
osmo-bsc (1.1.1) unstable; urgency=medium
[ Neels Hofmeyr ]
* jenkins: use osmo-clean-workspace.sh before and after build
[ Harald Welte ]
* Debian: re-introduce missing build dependency to libssl-dev
-- Harald Welte <laforge@gnumonks.org> Sat, 28 Oct 2017 21:49:00 +0200
osmo-bsc (1.1.0) unstable; urgency=medium
[ Alexander Couzens ]
* Initial release.
* debian/rules: show testsuite.log when tests are failing
[ Neels Hofmeyr ]
* jenkins: fix build: osmo-mgw from master, not pre_release
* drop files unrelated to osmo-bsc
* rename openbsc.pc to osmo-bsc.pc
* rewrite README
* move include/openbsc to include/osmocom/bsc
* drop MGCP client from osmo-bsc
* fix vty tests: vty no longer goes to parent node implicitly
* doc/examples: tweak osmo-bsc.cfg, add osmo-bsc_custom-sccp.cfg
* add ';' after OSMO_ASSERT()
[ Harald Welte ]
* configure.ac: No more libosmogb dependency
* configure.ac: remove --enable-osmo-bsc, --enable-nat
* configure.ac: remove smpp_mirror, which has no relation to a BSC
* contrib/jenkins.sh: MGCP is unconditional now
* configure.ac: Remove --enable-mgcp-transcoding
* configure.ac: Remove --enable-iu
* configure.ac: Remove checks for libgtp + c-ares
* configure.ac: Remove check for GMTOFF
* configure.ac: Package is now called osmo-bsc, not openbsc
* libbsc: document arguments of generate_bcch_chan_list()
* Make sure BA-IND in all SI2xxx is '0' and in all SI5xxx is '1'
* gsm0408_test: Verify that BA-IND is 0 in SI2xxx and 1 in SI5xxx
* .gitignore: Update to post-NITB-split realities
* Remove any references to RANAP and Iu
* Fix nanobts_omlattr unit test
* nanobts_omlattra_test: Initialize logging before executing tests
* osmo-bsc: Initialize logging before initializing rate_ctr
* Rename osmo_fsm to avoid illegal space in name + more meaningful name
[ Max ]
* Make TRX rf locking more visible
* SI13: drop PBCCH-related bits
* Wrap channel state assignment in macro
* Further cleanup leftovers from BSC/MSC split
* CTRL: cleanup write-only command functions
* Show OML link uptime in vty
* Fix repo split aftermath
* SI2q: cleanup UARFCN addition
* OML: consider RSL link state
* SI2q: fix generation for multiple UARFCNs
* Remove pkg-config file
* ctrl: add oml-uptime command
* SI1q: fix EARFCN appender
[ Pau Espin Pedrol ]
* Remove unneeded dbi dependency
* bsc_api: Fix NULL secondary_lchan access in handle_ass_fail
* libbsc: Use correct printf formatting for uint64_t
* bsc_vty: Improve description of mid-call-text cmd
-- Harald Welte <laforge@gnumonks.org> Sat, 28 Oct 2017 11:19:03 +0200
osmo-bsc (0.1.0) UNRELEASED; urgency=low
[ Alexander Couzens ]
* Initial release.
-- Alexander Couzens <lynxis@fe80.eu> Tue, 08 Aug 2017 01:12:56 +0000