Move all of libbsc/ into osmo-bsc/, and separate/move some implementations to
allow linking from utils/* and ipaccess/* without pulling in unccessary
dependencies.
Some utilities use gsm_network and gsm_bts structs, which already include data
structures for fairly advanced uses. Move initialization that only osmo-bsc
needs into new bsc_network_init() and bsc_bts_alloc_register() functions, so
that the leaner tools can use the old gsm_* versions without the need to link
everything (e.g. handover and lchan alloc code).
In some instances, there need to be stubs if to cut off linking "just before
the RSL level" and prevent dependencies from creeping in.
- abis_rsl_rcvmsg(): the only program currently interpreting RSL messages is
osmo-bsc, the utils are merely concerned with OML, if at all.
- paging_flush_bts(): ip.access nanobts models call this when the RSL link is
dropped. Only osmo-bsc actually needs to do anything there.
- on_gsm_ts_init(): the mechanism to trigger timeslot initialization is related
to OML, while this action to take on init would pull in RSL dependencies.
utils/ and ipaccess/ each have a stubs.c file to implement these stubs. Tests
implement stubs inline where required.
From src/utils/, src/ipaccess/ and tests/*/, link in .o files from osmo-bsc/.
In order for this to work, the osmo-bsc subdir must be built before the other
source trees. (An alternative would be to include the .c files as sources, but
that would re-compile them in every source tree. Not a large burden really, but
unless linking .o files gives problems, let's have the quicker build.)
Minor obvious cleanups creep in with this patch, I will not bother to name them
individually now unless code review asks me to.
Rationale:
1) libbsc has been separate to use it for osmo-nitb and osmo-bsc in the old
openbsc.git. This is no longer required, and spreading over libbsc and osmo-bsc
is distracting.
2) Recently, ridiculous linking requirements have made adding new functions
cumbersome, because libbsc has started depending on osmo-bsc/*.c
implementations: on gscon FSM and bssap functions. For example, neither
bs11_config nor ipaccess-config nor bts_test need handover_cfg or BSSMAP
message composition. It makes no sense to link the entire osmo-bsc to it, nor
do we want to keep adding stubs to each linking realm.
Change-Id: I36a586726f5818121abe54d25654819fc451d3bf
Fix various sanitizer complaints about memory leaks using a sanitizer build
with gcc (Debian 7.3.0-12) 7.3.0.
Also fix deprecation warnings on osmo_init_logging().
Depends: I216837780e9405fdaec8059c63d10699c695b360 (libosmocore)
Change-Id: I970c6f8a0e36a8b63e42349dbc92baff649e5cef
gsm_bts_alloc() ought to do all static initialization, so that e.g. unit tests
can use an initialized bts struct that is fully usable, just not registered at
the gsm_network.
For example, two INIT_LLIST_HEAD() and various system information data pointers
(pointing to proper places within the same bts struct) should definitely never
be omitted.
This fixes the remaining errors of gsm0408_test's SI tests, as revealed by a
sanitizer build using gcc (Debian 7.3.0-12) 7.3.0.
Fixes:
../../../../src/osmo-bsc/src/libbsc/system_information.c:613:3: runtime error: null pointer passed as argument 1, which is declared to never be null
Initializing the bts->si_common.rach_control results in different expected
bytes for SI2. The initialized values are
bts->si_common.rach_control.re = 1; /* no re-establishment */
bts->si_common.rach_control.tx_integer = 9; /* 12 slots spread - 217/115 slots delay */
bts->si_common.rach_control.max_trans = 3; /* 7 retransmissions */
bts->si_common.rach_control.t2 = 4; /* no emergency calls */
Causing a change to e5 04. 04 is t2 = 4, and the remaining values are verified by:
uint8_t re :1,
cell_bar :1,
tx_integer :4,
max_trans :2;
>>> hex(1 + (9 << 2) + (3 << 6))
'0xe5'
Change-Id: I13ef24bbe0f1fbe49465e67a0b67d6fd69fff3b1
Add missing deletion of osmo_stat_item_group_free(bts->bts_statg).
Add missing bts free after test_si_ba_ind().
Log deallocation, update expected test output.
This fixes some of the errors of gsm0408_test's SI tests, as revealed by a
sanitizer build using gcc (Debian 7.3.0-12) 7.3.0.
Fixes:
=================================================================
==19273==ERROR: AddressSanitizer: heap-use-after-free on address 0x60d0000004b8 at pc 0x7f1561a94621 bp 0x7ffe7a7a64a0 sp 0x7ffe7a7a6498
WRITE of size 8 at 0x60d0000004b8 thread T0
#0 0x7f1561a94620 in __llist_add ../../../src/libosmocore/include/osmocom/core/linuxlist.h:75
#1 0x7f1561a94620 in llist_add ../../../src/libosmocore/include/osmocom/core/linuxlist.h:90
#2 0x7f1561a94620 in osmo_stat_item_group_alloc ../../../src/libosmocore/src/stat_item.c:141
#3 0x5574f6a19935 in gsm_bts_alloc ../../../../src/osmo-bsc/src/libbsc/gsm_data.c:728
#4 0x5574f6a12920 in bts_init ../../../../src/osmo-bsc/tests/gsm0408/gsm0408_test.c:123
#5 0x5574f6a0ddb3 in test_si2q_e ../../../../src/osmo-bsc/tests/gsm0408/gsm0408_test.c:192
#6 0x5574f6a0ddb3 in main ../../../../src/osmo-bsc/tests/gsm0408/gsm0408_test.c:824
#7 0x7f156061aa86 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21a86)
#8 0x5574f6a10339 in _start (/n/s/dev/make/osmo-bsc/tests/gsm0408/gsm0408_test+0xfc339)
Change-Id: I1ebbd8cc0622ce1a061e933813829b1f770072dc
The LAI encoding test in gsm0408_test.c uses deprecated API, and a more
thorough test for LAI encoding has been added in libosmocore/test/gsm0408/.
Change-Id: I8a55d717ab15ba23943a2639accaadc33a4f731a
In the current implementation of osmo-bsc, the subscriber connection is
not handled (very) statefully. However, there is some state keeping in the
code that handles the mgcp connection, but there are still to much loose ends
which allow odd situations to happen, which then lead severe error situations
(see also closes tags at the end) This commit adds a number of improvements
to fix those problems.
- Use an osmo-fsm to control the gsm_subscriber_connection state and
make sure that certain operations can only take place at certain states
(e.g let connection oriented SCCP traffic only pass when an SCCP connection
actually exists.
Remove the old osmo_bsc_mgcp.c code. Use the recently developed MGCP client
FSM to handle the MGCP connections.
Also make sure that stuff that already works does not break. This in
particular refers to the internal handover capability and the respective
unit-tests.
See also OS#2823, OS#2768 and OS#2898
- Fix logic to permit assignment to a signalling channel. (OS#2762)
- Introduce T993210 to release lchan + subscr_conn if MSC fails to respond
The GSM specs don't have an explicit timer for this, so let's introdcue
a custom timer (hence starting with 99).
This timeout catches the following situation:
* we send a SCCP CR with COMPL_L3_INFO from the MS to the MSC,
* the MSC doesn't respond (e.g. SCCP routing failure, program down, ...)
The MS is supposed to timeout with T3210, 3220 or 3230. But the BSC
shouldn't trust the MS but have some timer on its own.
SCCP would have a timer T(conn est), but that one is specified to be
1-2min and hence rather long.
See also: OS#2775
- Terminate bsc_subscr_conn_fsm on SCCP N-DISC.ind from MSC
If the MSC is disconnecting the SCCP channel, we must terminate the FSM
which in turn will release all lchan's and other state.
This makes TC_chan_rel_hard_rlsd pass, see also OS#2731
As a side-effect, this fixes TC_chan_act_ack_est_ind_refused(),
where the MSC is answering with CREF to our CR/COMPL_L3.
- Release subscriber connection on RLL RELEASE IND of SAPI0 on main DCCH
The subscriber connection isn't really useful for anything after the
SAPI0 main signalling link has been released. We could try to
re-establish, but our best option is probably simply releasing the
subscriber_conn and anything related to it.
This will make TC_chan_rel_rll_rel_ind pass, see also OS#2730
This commit has been tested using the BSC_Tests TTCN3 testsuit and the
following tests were passed:
TC_chan_act_noreply
TC_chan_act_ack_noest
TC_chan_act_ack_est_ind_noreply
TC_chan_act_ack_est_ind_refused
TC_chan_act_nack
TC_chan_exhaustion
TC_ctrl
TC_chan_rel_conn_fail
TC_chan_rel_hard_clear
TC_chan_rel_hard_rlsd
TC_chan_rel_a_reset
TC_rll_est_ind_inact_lchan
TC_rll_est_ind_inval_sapi1
TC_rll_est_ind_inval_sapi3
TC_rll_est_ind_inval_sacch
TC_assignment_cic_only
TC_assignment_csd
TC_assignment_ctm
TC_assignment_fr_a5_0
TC_assignment_fr_a5_1_codec_missing
TC_assignment_fr_a5_1
TC_assignment_fr_a5_3
TC_assignment_fr_a5_4
TC_paging_imsi_nochan
TC_paging_tmsi_nochan
TC_paging_tmsi_any
TC_paging_tmsi_sdcch
TC_paging_tmsi_tch_f
TC_paging_tmsi_tch_hf
TC_paging_imsi_nochan_cgi
TC_paging_imsi_nochan_lac_ci
TC_paging_imsi_nochan_ci
TC_paging_imsi_nochan_lai
TC_paging_imsi_nochan_lac
TC_paging_imsi_nochan_all
TC_paging_imsi_nochan_plmn_lac_rnc
TC_paging_imsi_nochan_rnc
TC_paging_imsi_nochan_lac_rnc
TC_paging_imsi_nochan_lacs
TC_paging_imsi_nochan_lacs_empty
TC_paging_imsi_a_reset
TC_paging_counter
TC_rsl_drop_counter
TC_classmark
TC_unsol_ass_fail
TC_unsol_ass_compl
TC_unsol_ho_fail
TC_err_82_short_msg
TC_ho_int
Authors:
Harald Welte <laforge@gnumonks.org>
Philipp Maier <pmaier@sysmocom.de>
Neels Hofmeyr <neels@hofmeyr.de>
Closes: OS#2730
Closes: OS#2731
Closes: OS#2762
Closes: OS#2768
Closes: OS#2775
Closes: OS#2823
Closes: OS#2898
Closes: OS#2936
Change-Id: I68286d26e2014048b054f39ef29c35fef420cc97
Add 3-digit flags and use the new RAI and LAI API from libosmocore throughout
the code base to be able to handle an MNC < 100 that has three digits (leading
zeros).
The changes to abis_test and gsm0408_test show that this code now handles
3-digit MNC correctly, by not dropping the leading zero as 0xf in the encoded
PLMN.
Re-implement CTRL commands 'mcc', 'mnc' and 'mcc-mnc-apply' to preserve the
presence of the third digit of the MNC. Always reply with all leading zeros.
Adjust the expected results in ctrl_test_runner.py, to show that it works.
In VTY and CTRL, the parsing of MCC and MNC is inherently made stricter by use
of osmo_{mcc,mnc}_from_str() -- they will no longer allow surplus characters
and detect errno returned by strtol() (in contrast to atoi()).
Depends: Id2240f7f518494c9df6c8bda52c0d5092f90f221 (libosmocore),
Ib7176b1d65a03b76f41f94bc9d3293a8a07d24c6 (libosmocore),
I020a4f11791c61742a3d795f782805f7b7e8733e (libosmocore)
Change-Id: I8e722103344186fde118b26d8353db95a4581daa
All callers pass mcc=1, mnc=1, so just have it as default.
(Prepare for net->country_code etc to be replaced by net->plmn)
Change-Id: Ic16bc0bab3f2d4721e86a1a04f9d9f988d777df2
Move from using deprecated gsm48_construct_ra(), which uses a buf, to
gsm48_encode_ra(), which uses a gsm48_ra_id argument. Pass struct gsm48_ra_id
around instead of a buf.
struct gsm48_ra_id is the "encoded" representation of the bytes in a typical
MCC-MNC-LAC-RAC (04.08 Routing Area Id IE, 3GPP TS 24.008 § 10.5.5.15). Using
the struct spares using magic numbers for byte offsets.
In the process, fix a sanitizer warning for unaligned access by using memcpy()
instead of pointer assignment:
osmo-bsc/src/libbsc/abis_nm.c:2857:27: runtime error: store to misaligned address 0x7ffe8e0d6695 for type 'uint16_t', which requires 2 byte alignment
Note that (besides removing a now unnecessary cast) the gsm0408_test and
abis_test tests of RAI / CGI encoding remain stable, which indicates that the
new code is still correct.
Change-Id: I0d3908fb8ca1e2e669d257b5d59b40675fa85d06
Move gsm_data.c and handover_cfg.c to libbsc, where they belong.
This leaves libcommon utterly empty, drop it.
Change-Id: I6178061fa30c7e1a4c22c29d3c8f508b1033569f
The separation of gsm_data_shared.* from gsm_data.* historically allowed
compiling parts of it into osmo-bts, which we have dropped since (osmo-bts has
its own copy now). Even though gsm_data.* now becomes rather large by it,
remove the legacy separation to get rid of the "shared" naming, which is no
longer meaningful. A future patch might separate into meaningful smaller bits,
if we get the time.
Change-Id: Ie247bc492efb331871d970c56700595ad3f7e201
Provide concise log categories for each main scope.
Move the complete log categories 1:1 to osmo_bsc_main.c.
In bsc_nat.c, omit obviously unused log categories.
In tests, omit almost all log categories, except for those explicitly tested as
the expected output.
Note: should any logging occur for a log category that is omitted by accident,
such will end up being logged as DLGLOBAL, so it will show up and we can fix
it, and it will not get lost silently.
Change-Id: Ib524e49ec211662e0dfde8161495a72aa8ad76cf
There still is a lot of dead code that we inherited from the NITB
days, let's remove more of it.
libtrau will be re-introduced as part of osmo-mgw later.
Change-Id: I8e0af56a158f25a4f1384d667c03eb20e72df5b8
Recent change lin libosmocore disallow registering rate_ctr with the
same name and indexing multiple times. To accommodate to this:
* allocate network struct once and use it for all tests
* deregister rate_ctr group after each test
* free bts struct after each test
Related: OS#2757
Change-Id: Ie1537a1ee9ee812eaaf9f58dc4bc86d4add8c31f
According to the spec it's an empty 1-byte element reserved for future
extension but we still have to generate padding properly. Add stub
function similar to the used for SI2ter and adjust test output
accordingly.
Related: OS#2711
Change-Id: I3c278c57880a173df3c4648c9724339d23ce94fd
Previously we simply omitted SI2ter Rest Octets which is spec violation
which lead to 'Malformed Packet' error in Wireshark RSL dissector. Fix
this by generating empty 'no rest octets' with proper padding. Adjust
test output accordingly.
Change-Id: Ie4419aaaf93a462f501f8d8f7bf2677d37c58f94
Fixes: OS#2711
Previously if we ran out of space while adding EARFCN, we simply return
which might result in malformed SI2q. Fix it by proper rollback of
entire EARFCN. While at it, let's be paranoid and introduce extra checks
against integer overflow in budget calculations.
Change-Id: I4b2aa3825e9affb6dfeadecdf24dd1a43a92b7b7
Related: OS#2357
* fix insert routine to keep the list sorted by UARFCN
* fix rest octets generator to properly account for offset
* adjust test results accordingly
Change-Id: I443c5c5f937b490578354f3c8a0c5b92629f2794
Related: OS#2357
This adds a test case to explicitly verify the BA-IND is as expected
by the behaviour introduced in Change-Id I1cd0dc51026dcd0e508e63eea4e333e6b184787a
Related: OS#2525
Change-Id: I3e5b260af97ce96a221e4d51f6c1b41d58817a59
In masurement reports sent by the MS, this can then be used to correlate
if a given measurement report was in response to a BCCH/neighbor list
received on BCCH (SI2xxx) or on dowlink SACCH (SI5xxx).
Closes: OS#2525
Change-Id: I1cd0dc51026dcd0e508e63eea4e333e6b184787a
Fixes regression probably introduced in c696cc28.
For bts>0 logging doesn't show bts number correctly when printing lchan
identification string - it will always show it as "bts=0". The reason for
this is that the identification string is cached before bts->nr value is
set to a proper value.
This patch sets bts->nr as part of the first step of the bts structure
initialization, before caching happens thus making sure the cached
identification string is cached with the correct values.
Change-Id: I61c18a7f021fcb1ec00d34a745f4e3ab03416c2d
Disable large parts of the code that depend on BSC presence. The code sections
disabled by #if BEFORE_MSCSPLIT shall be modified or dropped in the course of
adding the A-interface.
Don't set msg->lchan nor msg->dst.
Don't use lchan in libmsc.
Decouple lac from bts.
Prepare entry/exit point for MSC -> BSC and MSC -> RNC communication:
Add msc_ifaces.[hc], a_iface.c, with a general msc_tx_dtap() to redirect to
different interfaces depending on the actual subscriber connection.
While iu_tx() is going to be functional fairly soon, the a_tx() is going to be
just a dummy for some time (see comment).
Add Iu specific fields in gsm_subscriber_connection: the UE connection pointer
and an indicator for the Integrity Protection status on Iu (to be fully
implemented in later commits).
Add lac member to gsm_subscriber_connection, to allow decoupling from
bts->location_area_code. The conn->lac will actually be set in iu.c in an
upcoming commit ("add iucs.[hc]").
move to libcommon-cs: gsm48_extract_mi(), gsm48_paging_extract_mi().
libmsc: duplicate gsm0808 / gsm48 functions (towards BSC).
In osmo-nitb, libmsc would directly call the functions on the BSC level, not
always via the bsc_api. When separating libmsc from libbsc, some functions are
missing from the linkage.
Hence duplicate these functions to libmsc, add an msc_ prefix for clarity, also
add a _tx to gsm0808_cipher_mode():
* add msc_gsm0808_tx_cipher_mode() (dummy/stub)
* add msc_gsm48_tx_mm_serv_ack()
* add msc_gsm48_tx_mm_serv_rej()
Call these from libmsc instead of
* gsm0808_cipher_mode()
* gsm48_tx_mm_serv_ack()
* gsm48_tx_mm_serv_rej()
Also add a comment related to msc_gsm0808_tx_cipher_mode() in two places.
Remove internal RTP streaming code; OsmoNITB supported that, but for OsmoMSC,
this will be done with an external MGCP gateway.
Remove LCHAN_MODIFY from internal MNCC state machine.
Temporarily disable all paging to be able to link libmsc without libbsc.
Skip the paging part of channel_test because the paging is now disabled.
Employ fake paging shims in order for msc_vlr_tests to still work.
msc_compl_l3(): publish in .h, tweak return value. Use new libmsc enum values
for return val, to avoid dependency on libbsc headers. Make callable from
other scopes: publish in osmo_msc.h and remove 'static' in osmo_msc.c
add gsm_encr to subscr_conn
move subscr_request to gsm_subscriber.h
subscr_request_channel() -> subscr_request_conn()
move to libmsc: osmo_stats_vty_add_cmds()
gsm_04_08: remove apply_codec_restrictions()
gsm0408_test: use NULL for root ctx
move to libbsc: gsm_bts_neighbor()
move to libbsc: lchan_next_meas_rep()
move vty config for t3212 to network level (periodic lu)
remove unneccessary linking from some tests
remove handle_abisip_signal()
abis_rsl.c: don't use libvlr from libbsc
gsm_subscriber_connection: put the LAC here, so that it is available without
accessing conn->bts. In bsc_api.c, place this lac in conn for the sake of
transition: Iu and A will use this new field to pass the LAC around, but in a
completely separate OsmoBSC this is not actually needed. It can be removed
again from osmo-bsc.git when the time has come.
Siemens MRPCI: completely drop sending the MRPCI messages for now, they shall
be added in osmo-bsc once the A-Interface code has settled. See OS#2389.
Related: OS#1845 OS#2257 OS#2389
Change-Id: Id3705236350d5f69e447046b0a764bbabc3d493c
This is the first step in creating this repository from the legacy openbsc.git.
Like all other Osmocom repositories, keep the autoconf and automake files in
the repository root. openbsc.git has been the sole exception, which ends now.
Change-Id: I9c6f2a448d9cb1cc088cf1cf6918b69d7e69b4e7
Call use_lchan early in allocate_loc_updating_req, do not directly call
rsl_chan_release but go through channel alloc to take the use_count into
account.