Harald Welte
ef061951e6
dump CCLK accuracy/type as part of bs11_config query
2009-05-17 12:43:42 +00:00
Harald Welte
7a2a71e255
revert commit #481 : we actually still need that stupid usleep() to reliably bootstrap nanoBTS :(
2009-05-01 21:54:11 +00:00
Harald Welte
c9e0218990
Fix "CM Service Request" parsing for Phase 1 devices. This means MO calls from phase1 should work now.
2009-05-01 19:07:53 +00:00
Harald Welte
440fed08ec
implement parsing and printing of RSL measurement results
2009-05-01 18:43:47 +00:00
Harald Welte
cf5b3597ed
add verbose reporting of RR STATUS cause
2009-05-01 18:28:42 +00:00
Harald Welte
3cf7c3ff89
don't print rf resource indication messages, they clutter up the logs
2009-05-01 18:28:00 +00:00
Harald Welte
0db97b253d
abis_nm: print some information about failure event report type / severity
2009-05-01 17:22:47 +00:00
Harald Welte
90f64767c4
print OML bts_nr rather than bts->nr
2009-05-01 17:22:09 +00:00
Harald Welte
6dab055752
print cause for channel activate NACK
2009-05-01 17:21:37 +00:00
Harald Welte
e81899cc00
fix printing of ip.access disconnect cause
2009-05-01 16:01:00 +00:00
Harald Welte
70f9b3dcf8
remove any sleeping from the ip.access input code
2009-05-01 16:00:44 +00:00
Harald Welte
a994a48635
remove misleading debug messages
2009-05-01 15:54:23 +00:00
Harald Welte
cf55978e48
make sure we terminate bsc_hack if the OML/RSL listening sockets cannot be created
2009-05-01 15:43:49 +00:00
Harald Welte
b463060db9
Fix long-standing bug: nanoBTS now even works after cold boot (first time after power up).
...
The problem in the old logic was that we started talking to a given object
(e.g. radio carrier) one we received an administrative state change report. It
turns out we have to wait for the software activation report instead - and
everything suddenly works.
2009-05-01 15:43:22 +00:00
Harald Welte
6dafb7ba37
bs11_config build fix
2009-05-01 15:40:14 +00:00
Harald Welte
f9a8cc3cba
send a signal for every software activation or failure event report
2009-05-01 15:39:49 +00:00
Harald Welte
4cc34228d2
add VTY command to set BTS unit ID
2009-05-01 15:12:31 +00:00
Harald Welte
879c85a89c
no need to make gsmnet structure non-static (fix from last commit)
2009-05-01 15:00:20 +00:00
Harald Welte
edb3778542
* Add support for multiple ip.access nanoBTS at one BSC
...
* keep track of site_id/bts_id in struct gsm_bts
* dynamically match incoming OML/RSL over TCP connections by BTS Unit ID
* introduce new debug category DINP (separate from DMI for hexdumps)
* remove ia_config() as it is no longer needed
*
* ensure that signalling links / E1 line information is correctly printed
* when bootstrapping RSL or OML, tell us for which BTS it is being doen
* separate bootstrap_bts() out from bootstrap_network()
* statically configure two ip.access BTS, one with unit id's 1800/0/0 and 1801/0/0
2009-05-01 14:59:07 +00:00
Harald Welte
4593ff3ace
ensure the tag parsing function is the same as used in input/ipaccess.c
...
FIXME: remove this copy of the code
2009-05-01 14:53:36 +00:00
Harald Welte
23897662c7
make sure all REPORT type messages have debug statements printing object class and instance
2009-05-01 14:52:51 +00:00
Harald Welte
191280d04b
abis_nm wants to use bts->bts_nr (the number of the BTS in the OML link) rather
...
than bts->nr (the number of the BTS in the BSC).
2009-05-01 13:20:04 +00:00
Harald Welte
aeedeb41dd
fix compiler warnings in abis_nm.c
2009-05-01 13:08:14 +00:00
Harald Welte
6c96ba5e4f
abis_nm: print the NACK cause in human readable form
2009-05-01 13:03:40 +00:00
Holger Freyther
acb688bc9b
[misc] Sanity check and error messages in misdn.c
...
Add some sanity checks, add some error checks, print
the __func__ in the error message too.
Patch from Andreas Eversberg
2009-05-01 04:59:55 +00:00
Harald Welte
4802b88890
fix printing of OML IP
2009-04-30 16:23:45 +00:00
Harald Welte
9de2bf884b
fix missing \n at end of debug statement
2009-04-30 15:59:55 +00:00
Harald Welte
25de99170f
add new 'ipaccess-config' program to set Unit ID and primary OML NVRAM parameters of ip.access BTS
2009-04-30 15:53:07 +00:00
Harald Welte
193fefc683
functionality to set nanoBTS NVRAM attributes and to restart BTS
2009-04-30 15:16:27 +00:00
Harald Welte
3788196026
more pretty-printing of ipaccess-find output
2009-04-30 15:15:37 +00:00
Harald Welte
3bfbb84021
Add some more ip.access specific OML attributes/messages. In this case it is
...
about configuring the primary OML link IP address in the NVRAM of the device.
2009-04-29 22:58:38 +00:00
Harald Welte
a7cfa03cb2
bs11_config: print PLL 'work' and 'set' values during query
2009-04-29 22:33:02 +00:00
Harald Welte
c50ea84804
add missing newline in debug statement for RS232 TX
2009-04-29 22:32:10 +00:00
Harald Welte
d47a4beff8
activate subchannel muxer/demuxer on E1 TS 3
2009-04-29 16:21:34 +00:00
Harald Welte
360f06cba3
Fix order of subchannel bits (Andreas Eversberg)
2009-04-29 16:21:18 +00:00
Harald Welte
70128d03df
remove extra whitespace in output of 'query' command
2009-04-29 13:27:56 +00:00
Harald Welte
aaf02d9e01
read the PLL config as part of the bs11_config 'query' command
2009-04-29 13:25:57 +00:00
Harald Welte
a432cd3930
make "PLL mode" setting actually work rather than segfault
2009-04-29 13:01:50 +00:00
Harald Welte
e69f5fb411
Add bs11_config commands to set the PLL mode from E1_LOCKED to STANDALONE
...
and vice-versa. This has not yet been tested yet.
2009-04-28 16:31:38 +00:00
Holger Freyther
b5c00f5587
[misdn] Add option to automatically release layer2 on exit
...
Patch by Andreas Eversberg to automatically release
layer2 on exit of the application. Made the naming of
the variables consistent (only release_l2 and not both
release_l2 and l2_release).
2009-04-22 22:08:07 +00:00
Holger Freyther
dda22c18b5
[bsc_hack] Allow to select the cardnr defaulting to number 0
...
Patch from Andreas Eversberg to allow to select the ISDN
card number. The default remains the same.
2009-04-22 22:07:31 +00:00
Holger Freyther
0a173bfe28
[bsc_hack] Allow to set the location area code
...
Patch by Andreas Eversberg to allow to set the
location area code from the command line.
2009-04-22 22:07:07 +00:00
Holger Freyther
bcdebbfcab
[bsc_hack] House keeping, remove dead code
...
This callback is not used from within the paging layer. We do
have a different set of callbacks in place. Remove it here.
2009-04-19 06:39:29 +00:00
Holger Freyther
c2995ea741
[db] Introduce a VLR database here
...
This is not a proper VLR yet, specially the (subscriber_)id
used might not be the proper one in a real network.
2009-04-19 06:35:23 +00:00
Holger Freyther
1d506c8a54
[db] Make the db connection static
2009-04-19 06:35:20 +00:00
Holger Freyther
36650b872f
[db] Keep track of the current gsm_network
2009-04-19 06:35:16 +00:00
Holger Freyther
ef7f7ce452
[bsc_hack] Initialize db as part of the network
...
Let us establish the rule that there is one DB
per network. This will allow to assign a BTS of
the network to a subscriber that is loaded from
the db across restarts.
2009-04-19 06:35:12 +00:00
Holger Freyther
d4cb79f90d
[db] Remove FIXME as it is fixed...
2009-04-19 06:35:05 +00:00
Holger Freyther
a1f92f0a43
[subscriber] Introduce subscr_put_channel
...
Introduce subscr_put_channel to release a channel and to
allow gsm_subscriber.c to hand this channel to any suitable
pending requests.
2009-04-12 05:37:52 +00:00
Holger Freyther
4a49e77ff4
[subscriber] Update the current_bts field on imsi detach and LOC accept
...
When sending LOCATION UPDATING REQUEST Accept or when getting
a IMSI Detach update the gsm_bts of the gsm_subscriber.
2009-04-12 05:37:29 +00:00