According to 3GPP TS 44.018, section 9.1.15, the RR Handover Command
message may optionally contain the Cipher Mode Setting IE (10.5.2.9).
Section 9.1.15.10 states that this IE may be omitted in case of the
intra-RAT GERAN-to-GERAN handover, however in case of the inter-RAT
handover (e.g. EUTRAN-to-GERAN), this IE *shall* always be included.
Change-Id: I1d270e82d0a9b12897fc94dae4e8999aa132a22f
Related: SYS#5838
Firstly, do not store the encoded AMR length-value bits in gsm_lchan->*
before an activation/modify has actually succeeded.
And secondly, do not store the AMR LV structure in struct gsm_lchan at
all, but only generate the TLV exactly when a message is being composed.
In gsm48_multirate_config(), generate the LV directly to a msgb instead
of a static buffer first. gsm0408_test.c expected output verifies that
the generated LV bytes remain unchanged.
In lchan_mr_config(), introduce a target mr_conf argument, so that Chan
Act and Mode Modify may generate the filtered AMR config to different
locations (lchan->{activate,modify}.mr_conf_filtered).
Only after receiving an ACK for Activate/Modify, set
lchan->current_mr_conf from lchan->{activate,modify}.mr_conf_filtered.
Use the properly scoped lchan->activate.mr_conf_filtered for Chan Act,
lchan->modify.mr_conf_filtered for Mode Modify and
new_lchan->current_mr_conf for Handover Command as appropriate.
Related: SYS#5315 OS#4940 OS#3787 OS#3833
Change-Id: Ie57f9d0e3912632903d9740291225bfd1634ed47
Use the new osmo_mobile_identity API to shed some code dup and simplify.
gsm48_paging_extract_mi() is now unused, drop.
(More refactoring to use osmo_mobile_identity follows in subsequent patch.)
Depends: If4f7be606e54cfa1c59084cf169785b1cbda5cf5 (libosmocore)
Change-Id: Id6cccaac64392b737b3bba8f3a22a88009adb23b
Filtering by IMSI in osmo-bsc is a legacy use case with questionable
usefulness. Remove.
Do not keep deprecated VTY commands: those could be dangerous, since
(presumably non-existing) users might assume that the filtering would still be
in place. Rather fail to start osmo-bsc for config with an IMSI ACL.
The IMSI filtering did, if present, provide the logging with an IMSI to print
for the bsc_subscriber. TMSIs should have ended up in logging likewise, which
has never been implemented. The proper way to learn the IMSI would be by the
Common Id message from the MSC. Furthermore, the upcoming MSC pooling feature
will extract the mobile identity again, and will hence make sure that both IMSI
and TMSI identities, as available, end up in the bsc_subscriber and will be
logged again.
So long, IMSI ACL, and thanks for all the fish.
Change-Id: I89727af5387e8360362e995fdee959883c37d89a
As soon as we have received an ETWS primary notification message from
the CBC, we should transmit it as "RR Application Information" to all
dedicated channels.
Change-Id: I913d0237cffdcb95037da8489acef5f32a7fc02e
The function gsm48_multirate_config() generates the multirate
configuration IE, that is sent via RSL to configure the active set of
AMR codecs inside the BTS. The function already works, but it does not
check the input data for consistancy. Lets add some consistancy check to
make sure that inconsistant parameters are rejected. Also allow the
output pointer to be NULL, so that the function can be used to perform
a dry run to be able to verify parameters.
- Check for invalid / inconsistant configuration parameters
- Perform a dry-run when lv pointer is set to NULL
Change-Id: I06beb7dd7236c81c3a91af4d09c31891f4b910a4
Related: OS#3529
If the MSC sends a BSSMAP Classmark Request, send an RR Classmark Enquiry to
the MS.
(The reverse direction, i.e. sending a BSSMAP Classmark Update back to the MSC,
is already implemented.)
Related: OS#3043 (A5/3 encryption)
Related: osmo-ttcn3-hacks Idaab4d568cf986b4897ba008f6262c839d1592fb
Change-Id: If5db638fd6e8d9c2ef9e139e99f0fabe1ef16ddf
The function is defined in gsm_data.c, so it should be declared
in gsm_data.h and not in gsm_04_08_rr.h
Change-Id: I5200063fb43c857a984ea8e41a8485d796e49cde
Remove as much as possible from bsc_api.h. Use '#pragma once'. Tweak head
comment.
BSC_API_CONN_POL_{ACCEPT,REJECT}: only user is static complete_layer3(), just
use a bool return value instead.
msc_connected(): only used in osmo_bsc_api.c, make static there.
Instead of including gsm_data.h, declare structs opaquely, include stdint.h.
codec_pref_test.c used this as indirect gsm_data.h include via osmo_bsc.h,
include gsm_data.h there directly.
osmo_bsc.h: instead of including bsc_api.h, declare opaque structs.
gsm_04_08_rr.h: declare opaque structs to replace indirect include of
gsm_data.h.
Change-Id: Ia9c0f9828317236048e40ec9ecf9990592e2190a
Add FSMs:
- timeslot_fsm: handle dynamic timeslots and OML+RSL availability.
- lchan_fsm: handle an individual lchan activation, RTP stream and release,
signal the appropriate calling FSMs on success, failure, release.
- mgw_endpoint_fsm: handle one entire endpoint with several CI.
- assignment_fsm: BSSMAP Assignment Request.
- handover_fsm: all of intra, inter-MO and inter-MT handover.
Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing
the maximum amount events (32), and it is more logical to treat assignment,
handover and MGW procedures in separate FSMs.
- Add logging macros for each FSM type:
- LOG_TS()
- LOG_LCHAN()
- LOG_MGWEP(), LOG_CI()
- LOG_ASSIGNMENT()
- LOG_HO()
These log with the osmo_fsm_inst where present.
New style decision: logging without a final newline char is awkward,
especially for gsmtap logging and when other logs interleave LOGPC() calls;
we have various cases where the final \n goes missing, and also this invokes
the log category checking N times instead of once.
So I decided to make these macros *always* append a newline, but only if
there is no final newline yet. I hope that the compiler optimizes the
strlen() of the constant format strings away. Thus I can log with or without
typing "\n" and always get an \n termination anyway.
General:
- replace osmo_timers, state enums and program-wide osmo_signal_dispatch()
with dedicated FSM timeouts, states and events.
- introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def.
These can be used (with some macro magic) to define a state's timeout once,
and not make mistakes for each osmo_fsm_inst_state_chg().
Details:
bsc_subscr_conn_fsm.c:
- move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and
mgw_endpoint_fsm.
- There is exactly one state for an ongoing Assignment, with all details
handled in conn->assignment.fi. The state relies on the assignment_fsm's
timeout.
- There is one state for an ongoing Handover; except for an incoming Handover
from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn
are both established.
- move bssmap_add_lcls_status() to osmo_bsc_lcls.c
abis_rsl.c:
- move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in
abis_rsl.c
- reduce some rsl functions to merely send a message, rename to "_tx_".
- rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the
lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function.
- move all timers and error/release handling away into various FSMs.
- tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an
lchan passed, but just mode,type that they require. Rename to
ipacc_speech_mode*() and ipacc_payload_type().
- add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR
message received during BSSMAP Handover Command.
- move various logging to LOG_LCHAN() in order to log with the lchan FSM instance.
One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging
from DRR to DRSL. It might actually make sense to combine those categories.
- lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance.
- handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's
correct).
- gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during
inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS.
assignment_fsm.c:
- the Chan Mode Modify in case of re-using the same lchan is not implemented
yet, because this was also missing in the previous implementation (OS#3357).
osmo_bsc_api.c:
- simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to
lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv
twice, once by member assignment and then again with a memcpy.)
- During handover, we used to copy the MR config from the old lchan. Since we
may handover between FR and HR, rather set the MR Config anew every time, so
that FR rates are always available on FR lchans, and never on HR lchans.
Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore),
I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore)
Change-Id: I82e3f918295daa83274a4cf803f046979f284366
Rationale: bsc_api.c used to be a kind of kitchen sink for various
implementations, we want to dissolve it. Also, combining 0808 and 0408 in the
same c file causes "weird" linking dependencies for utility and test programs.
bsc_api.c will be completely dissolved in upcoming
Ib7ce026b52d4ba3e53a8b2824e74ea92432c48c5.
Change-Id: Ie8ee334145bf7bc3a601d395ea7ab9b2009b61c7
"utils" suggests thin helpers to aid using a proper API, while this .c file
actually *is* the proper RR API. Rename from "utils" to "rr".
Change-Id: I0ffff63d57f03cb324df8e40e41caea5b55a2c85
Vadim Yanitskiy
Neels Hofmeyr
Neels Hofmeyr
Harald Welte
Philipp Maier