In the big mess of gsm_data we reached a point where we have multiple
functions doing the same thing, most probably because it's hard finding
stuff in there. Let's drop one of them (the one which less callers) and
move it to bts.*, where it belongs.
Change-Id: I9071a0ab250844619280fbe2be63ed99f2c87eb1
Place all code related to the object into the related file.
Having all the data model in one file made sense in early stage of
development to make progress quickly, but nowadays it hurts more than
helps, due to constantly growing size and more and more bits being
added to the model, gaining in complexity.
Currently, having lots of different objects mixed up in gsm_data.h is a hole
of despair, where nobody can make any sense were to properly put new stuff
in, ending up with functions related to same object in different files
or with wrong prefixes, declarations of non-existing functions, etc.
because people cannot make up their mind on strict relation to objects
in the data model.
Splitting them in files really helps finding code operating on a
specific object and helping with logically splitting in the future.
Change-Id: I00c15f5285b5c1a0109279b7ab192d5467a04ece
In various places that receive an error cause from RSL and place it in
lchan.release.rsl_error_cause, translate it to an RR cause and place that in
the recently added lchan.release.rr_cause. Hence the RR Channel Release message
now reflects more specific error causes when the reason for the error was
received in an RSL message's cause value.
Change-Id: I46eb12c91a8c08162b43dd22c7ba825ef3bbc6ac
In lchan.release, add 'cause_rr', and set RR Channel Release message's cause
value to lchan.release.cause_rr.
In lchan_release(), do not set lchan.release.rsl_error_cause to the RR cause
value, these are unrelated. Store in new lchan.release.cause_rr instead. The
rsl_error_cause is apparently only used for logging, except for one place in
lchan_fsm_wait_activ_ack() that compares it to RSL_ERR_RCH_ALR_ACTV_ALLOC, so
there should not be a functional difference by this fix.
Propagate the BSSMAP Clear Command cause to the RR Channel Release:
Add struct gscon_clear_cmd_data as event data for GSCON_EV_A_CLEAR_CMD -- so
far it sent the is_csfb flag, add the gsm0808_cause; invoking the event happens
in bssmap_handle_clear_cmd().
Adjust event handling in gscon_fsm_allstate(); there, pass the cause to
gscon_release_lchans(). In gscon_release_lchans(), pass the cause to
gscon_release_lchan(), and then lchan_release(), which sets the new
lchan.release.cause_rr to the passed cause value.
As soon as the lchan FSM enters the proper state, it calls
gsm48_send_rr_release(). There, set the cause value in the encoded message to
lchan.release.cause_rr.
Interworking with osmo-msc: so far, osmo-msc fails to set the Clear Command
cause code for normal release, it just passes 0 which amounts to
GSM0808_CAUSE_RADIO_INTERFACE_MESSAGE_FAILURE. Before this patch, osmo-bsc
always sent GSM48_RR_CAUSE_NORMAL in the RR Channel Release, and after this
patch it will receive 0 == GSM0808_CAUSE_RADIO_INTERFACE_MESSAGE_FAILURE from
osmo-msc and more accurately translate that to GSM48_RR_CAUSE_PROT_ERROR_UNSPC.
This means in practice that we will now see an error cause in RR Channel
Release instead of GSM48_RR_CAUSE_NORMAL when working with osmo-msc. For
changing osmo-msc to send GSM0808_CAUSE_CALL_CONTROL instead (which translates
to GSM48_RR_CAUSE_NORMAL), see OS#4664 and change-id
I1347ed72ae7d7ea73a557b866e764819c5ef8c42 (osmo-msc).
A test for this is in Ie6c99f28b610a67f2d59ec00b3541940e882251b
(osmo-ttcn3-hacks).
Related: SYS#4872
Change-Id: I734cc55c501d61bbdadee81a223b26f9df57f959
Up to 16 SI2quater are multiplexed; each fits 3 EARFCNS, so the practical
maximum is 48 (of course depending on how many bits are used by other SI2quater
elements).
Change-Id: Iabeed10053ee5899b4def3509aedd25abb2410a9
Starting from ttcn3-bsc-test-sccplite build #777, it was noticed
that osmo-bsc crashes with the following message:
Assert failed conn->lchan include/osmocom/bsc/gsm_data.h:1376
The cause of this is a recently merged patch that calls conn_get_bts() during
assignment_fsm rate counter dispatch:
"Count assignment rates per BTS as well"
commit b5ccf09fc4
Change-Id I0009e51d4caf68e762138d98e2e23d49acc3cc1a
The root cause being that the assignment_fsm attempts to count an Assignment
event for a BTS after the lchan has already been released and disassociated
from the conn.
The assertion is found in conn_get_bts(), which is used in various places. In
fact, each caller is a potential DoS risk -- though most are in code paths that
are guaranteed to have an lchan and bts present, having an OSMO_ASSERT() on the
relatively volatile presence of an lchan is not a good idea for osmo-bsc's
stability and error resilience.
- Change conn_get_bts() to return NULL in the lack of an lchan.
- Adjust all callers of conn_get_bts() to gracefully handle a NULL return val.
- Same for cgi_for_msc() and callers, closely related.
Here is a backtrace:
Program received signal SIGABRT
pwndbg> bt
0x0000555555be6e52 in conn_get_bts (conn=0x622000057160) at include/osmocom/bsc/gsm_data.h:1376
0x0000555555c1edc8 in assignment_fsm_timer_cb (fi=0x612000060220) at assignment_fsm.c:758
0x00007ffff72b1104 in fsm_tmr_cb (data=0x612000060220) at libosmocore/src/fsm.c:325
0x00007ffff72ab062 in osmo_timers_update () at libosmocore/src/timer.c:257
0x00007ffff72ab5d2 in _osmo_select_main (polling=0) at libosmocore/src/select.c:260
0x00007ffff72abd2f in osmo_select_main_ctx (polling=<optimized out>) at libosmocore/src/select.c:291
0x0000555555e1b81b in main (argc=3, argv=0x7fffffffe1b8) at osmo_bsc_main.c:953
0x00007ffff6752002 in __libc_start_main () from /usr/lib/libc.so.6
0x0000555555b61bbe in _start ()
In the case of the assignment_fsm counter, we now miss a chance to increase a
BTS counter for a failed Assignment, but this is a separate problem. The main
point of this patch is that osmo-bsc must not crash.
Related: OS#4620, OS#4619
Patch-by: fixeria
Tweaked-by: neels
Fixes: I0009e51d4caf68e762138d98e2e23d49acc3cc1a
Change-Id: Id681dfb0ad654bdb4b71805d1ad4f39a8bf6bbd1
If the BTS downlink CCCH (PCH + AGCH) queue is full, it sends
us an RSL DELETE INDICATION. So far, osmo-bsc logs this as
<0004> abis_rsl.c:2026 Unimplemented Abis RSL TRX message type 0x14
which is not very helpful. Instead, make the log message more
descriptive and add a rate counter for monitoring.
Change-Id: I9bd2966db90e39ccca442d6bc9abc91e9a9147d4
Closes: OS#3190
Tests for these counters are added in I2006f1def5352b4b73d0159bfcaa2da9c64bfe3f
(osmo-ttcn3-hacks).
Change-Id: I2ded757958dfa62b502efbab765203bcadf899e2
Use the new osmo_mobile_identity API to shed some code dup and simplify.
gsm48_paging_extract_mi() is now unused, drop.
(More refactoring to use osmo_mobile_identity follows in subsequent patch.)
Depends: If4f7be606e54cfa1c59084cf169785b1cbda5cf5 (libosmocore)
Change-Id: Id6cccaac64392b737b3bba8f3a22a88009adb23b
This adds the assignment counters for the BTS as well and changes the
assignment_count() macro to increase both the counters for the BSC as
well as the BTS.
Related: SYS#4877
Change-Id: I0009e51d4caf68e762138d98e2e23d49acc3cc1a
Prepare for MSC pooling by NRI. Before introducing actual NRI decoding and MSC
matching, fix the bsc_find_msc() implementation.
(Indicate the places relevant for NRI by "TODO" comments).
bsc_find_msc() puts an MSC to the end of the internal list of MSCs when it was
used. This has problems:
- Modifying the list affects VTY output, e.g. 'show running-config' and
'show mscs' change their order in which MSCs are shown, depending on how
often a round-robin selection has taken place.
- Emergency calls and normal calls potentially pick quite different sets of
eligible MSCs. When the round-robin choices between these sets affect each
other, the choice is not balanced. For example, if only the first MSC is
allow_emerg == true, every emergency call would reset the round-robin state
to the first MSC in the list, also for normal calls. If there are regular
emergency calls, normal calls will then tend to load more onto the first few
MSCs after those picked for emergency calls.
Fix: Never affect the ordering of MSCs in the internal list of MSCs. Instead,
keep a "next_nr" MSC index and determine the next round-robin target like that.
Keep a separate "next_emerg_nr" MSC index so that emergency call round-robin
does no longer cause normal round-robin to skip MSCs.
Further problems in current bsc_find_msc():
- The "blind:" label should also do round-robin.
- The "paging:" part should not attempt to use disconnected MSCs.
- Both should also heed NRI matches (when they are added).
Fix: instead of code dup, determine Paging Response matching with an earlier
Paging Request right at the start. If that yields no usable MSC, continue into
the normal NRI and round-robin selection.
The loop in this patch is inspired by the upcoming implementation of MSC
pooling by NRI, as indicated by the two TODO comments. The point is that, in
the presence of an NRI from a TMSI identity, we always need to iterate all of
the MSCs to find possible NRI matches. The two round-robin sets (Emergency and
non-Emergency) are determined in the same loop iteration for cases that have no
or match no NRI, or where a matching MSC is currently disconnected.
Change-Id: Idf71f07ba5a17d5b870dc1a5a2875b6fedb61291
The separate struct osmo_bsc_data is like another separate struct gsm_network
for no reason. It is labeled "per-BSC data". These days, all of this is a
single BSC and there will not be different sets of osmo_bsc_data.
Drop struct osmo_bsc_data, move its members directly into gsm_network.
Some places tested 'if (net->bsc_data)', which is always true. Modify those
cases to rather do checks like 'if (net->rf_ctrl)', which are also always true
AFAICT, to keep as much unmodified logic as possible in this patch.
Change-Id: Ic7ae65e3b36e6e4b279eb01ad594f1226b5929e0
The BSC is the wrong network component to originate USSD messaging, as can be
seen in the hacks in the USSD code: for example, the BSC would send a CM
Service Accept message as if an MSC had accepted the connection, dispatch a
USSD and directly send some RR release message (without proper tear down
messaging like the lchan_fsm does these days). This made sense in the osmo-nitb
world, but by now we are aiming for solid 3GPP compliance. The BSC shall not
originate USSD messages.
Deprecate all VTY and CTRL commands related to USSD:
VTY
[no] bsc-welcome-text
[no] bsc-msc-lost-text
[no] bsc-grace-text
[no] missing-msc-text
(the commands with 'no' are ignored, without 'no' lead to an error)
CTRL
ussd-notify-v1
Drop (already unused) ussd.h.
Drop gsm_04_80.h, gsm_04_80_utils.c, and all calling code.
Drop "RF grace" notification, where osmo-bsc was able to notify active
subscribers that the RF was being turned off.
Change-Id: Iaef6f2e01b4dbf2bff0a0bb50d6851f50ae79f6a
It is not entirely clear to me what this used to do once, but I've stumbled
upon this before. By now I am certain that this is a non-standard legacy
feature. The BSC does *not* redirect connections during CC transactions.
Along with this, a bunch of legacy utility functions can be dropped. All of
this is unused code.
(Preparing for MSC pooling.)
Change-Id: Id54afe8ccf0e11b9121a733224054c9565eafb58
Filtering by IMSI in osmo-bsc is a legacy use case with questionable
usefulness. Remove.
Do not keep deprecated VTY commands: those could be dangerous, since
(presumably non-existing) users might assume that the filtering would still be
in place. Rather fail to start osmo-bsc for config with an IMSI ACL.
The IMSI filtering did, if present, provide the logging with an IMSI to print
for the bsc_subscriber. TMSIs should have ended up in logging likewise, which
has never been implemented. The proper way to learn the IMSI would be by the
Common Id message from the MSC. Furthermore, the upcoming MSC pooling feature
will extract the mobile identity again, and will hence make sure that both IMSI
and TMSI identities, as available, end up in the bsc_subscriber and will be
logged again.
So long, IMSI ACL, and thanks for all the fish.
Change-Id: I89727af5387e8360362e995fdee959883c37d89a
This is a corner case but still we should count the events to
know when is this happening. And for the number of paging requests
to match the number of paging responses.
Change-Id: I1755be40d29980b75353cb4b8087d1ce0d92854a
It's useful to know how many BTS are actually configured to compare
it to a number of connected BTS's.
Change-Id: I41cb60f9cb962003227e4a7b63db05acbcdb6f4c
Currently only supports a single MCTR with fixed configuration
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Change-Id: I96b8bb2c01c05bf153fc924f62bd6aafa96725ee
Starting from G12R13 the MCTR swiches to BSC controlled mode. And
although we think we know how to configure it (via MCTR Conf Req),
something doesn't work right and the timeslot configuration is not
accepted. (TS Conf Result shows "Data not according to request").
So as a workaround for now, we use this version of the protocol where
we don't configure the MCTR (it's in "BTS controlled mode") and with
this protocol, the BTS accepts our timeslot config and we can bring
the system up.
This commit add a generic option to limit either OML or RSL IWD
version to any value. It also keeps track of the actual negotation
version so we can react to it in other places of the code.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Change-Id: I8f0b0ba72056ea4250fe490e7a38630c77c04f65
better version limit
Change-Id: Ia789f8ede3eab7eeca6c759da0109e0b53398f60
The existing Nokia *Site code destroyed the LAPD SAP instance for OML
while processing an OML message. Once the stack frame returned back
to the LAPD code, the LAPD SAP was gone -> segfault.
Let's work around this by moving deletion of the LAPD SAP out-of-line
by starting a timer 0ms in the future. Not particularly nice, but
effective.
Change-Id: I6270c7210f600e53f845561898245d2fd30a368d
Closes: OS#1761
According to 3GPP TS 44.060, section 12.24, GPRS Cell Options IE
contains two parameters related to 11 bit Access Burst support:
- ACCESS_BURST_TYPE - whether the 8 or 11 bit format shall be
used in the PACKET CHANNEL REQUEST message, the PTCCH/U block,
PACKET CONTROL ACKNOWLEDGMENT and the PS HANDOVER ACCESS
messages on the PRACH (if present).
- EGPRS_PACKET_CHANNEL_REQUEST - whether EGPRS capable MSs shall
use EGPRS PACKET CHANNEL REQUEST message for Uplink TBF
establishment on the RACH or on the PRACH (if present).
The VTY option 'gprs 11bit_rach_support_for_egprs' actually controls
the second parameter - EGPRS_PACKET_CHANNEL_REQUEST, though it may
be hard to understand this from its name and description.
This patch is actually a group of tightly related changes:
- deprecate 'gprs 11bit_rach_support_for_egprs (0|1)':
- update its description to avoid any possible confusion,
- print a warning if it's used in non-EGPRS mode,
- print a warning if it's still used;
- introduce '[no] gprs egprs-packet-channel-request':
- ensure that it can only set / printed in the EGPRS mode;
- take a chance to clean-up / rename the related struct members:
- 'supports_egprs_11bit_rach' -> bool 'egprs_pkt_chan_request',
- remove 'supports_egprs_11bit_rach' from 'gprs_cell_options'
because we already have 'ext_info.use_egprs_p_ch_req' there.
Change-Id: Ied5bd10a806aeeac65ef32339d4ab0e3700e5da9
Save OML failure reports from each BTS. Add a VTY command to display them
conveniently and optionally clear the list.
OsmoBSC> show bts 0 fail-rep
[2020-03-23 14:51:22] Type=processing failure, Severity=minor failure, Probable cause=Manufacturer specific values: Software warning, Additional text=test message sent from VTY
[2020-03-23 14:51:19] Type=processing failure, Severity=minor failure, Probable cause=Manufacturer specific values: Software warning, Additional text=test message sent from VTY
Related: OS#1605
Change-Id: I18aa17a721cd5eb1c98926dc2367229c0a50bc78
Refuse to start with mutually exclusive codec settings, unless
allow-unusable-timeslots is set in the network section of the config.
The checks were already implemented and fill the error log if the config
is invalid.
Related: OS#3739
Change-Id: I3ccfc3b0a8641400cb97a23b24d7ed92d2ad25cd
As per 3GPP TS 45.002, section 3.3.2.3, and table 3 of clause 7,
the following limitations apply mapping of CCCH/BCCH channels:
- TS0/C0 shall be configured as CCCH/BCCH (optionally combined);
- combined CCCH (CCCH+SDCCH4) can only be used on TS0;
- additional CCCHs can be on TS2, TS4, and TS6;
- additional CCCHs are not allowed if TS0 is combined.
Let's make sure that OsmoBSC is properly configured before starring.
Change-Id: I758ef80f7884ba35cdf59d671ee30222ffb9d68b
In addition to transmission of the ETWS Primary Notification via all
dedicated channels, we also need to send it to the BTS for transmission
via PCH (P1 Rest Octets) and for forwarding to PCU for PACCH
transmission.
Change-Id: I7e45b0373458a4348b12b92dd92861062532548b
This adds code to handle CBSP (Cell Broadcast Service Protocol)
from the CBC (Cell Broadcast Centre), as well as BSC-internal data
structures for scheduling the various SMSCB on the CBCH of each BTS.
There are currently one known shortcoming in the code: We don't yet
verify if keepalives are received within repetition period.
Change-Id: Ia0a0de862a104d0f447a5d6e56c7c83981b825c7
Clarify some in-code comments.
Fix descriptions of some handover timers, which still talked of "MO" and "MT"
handover -- which we now call "inter-BSC out" or "inter-BSC in" instead.
Change-Id: I8429a830edd0325893ac90f22fcc05309617bd2d
Add a new VTY command "ccch load-indication-threshold <0-100>"
by which the user can configure the threshold after which the BTS
shall send CCCH LOAD IND. It used to be hard-coded to a
default value of 10.
Change-Id: I059fe4627438e26a06e00d84e342b736ab7af440
The Osmux CID obtained from the MSC is passed to the co-located BSC MGW
to configure the MSC-side MGW conn of a call leg.
Depends on: osmo-mgw.git I73b4c62baf39050da81d65553cbea07bc51163de
Change-Id: I86e7e13fc7921e3209fb764c0e7797e7ec09b79e
To support the 3 possible preferences, the changes needed were:
- Replace 'full_rate' bool with a 3 option enum to represent
the channels types for signalling
- Switch from _pref/_alt to using an array sorted in preference
order
Originally merged as Change-Id I4c7499c8c866ea3ff7b1327edb3615d003d927d3,
reverted because the change broke voice calls. Re-submitting with the fix:
don't forget to set conn->assignment.requires_voice_stream.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Change-Id: I7513d2cbe8b695ba6f031ad11560c63a6535cf2d
osmo-mgw.git also includes fixes of the MGW endpoint FSM, for example
I92a9944acc96398acd6649f9c3c5badec5dd6dcc.
Depends: I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I03e6b48d9b0a5370310d5f56809259ff7909cf9d
Move the T_defs API to libosmocore as osmo_tdefs: remove the local T_defs API
and use libosmocore's osmo_tdef* API instead.
The root reason is moving the mgw_endpoint_fsm to libosmo-mgcp-client to be
able to use it in osmo-msc for inter-MSC handover.
When adding osmo_tdef, the new concept of timer groups was added to the API. It
would make sense to apply group names here as well, but do not modify the VTY
configuration for timers. The future might bring separate groups (or not).
Depends: Ibd6b1ed7f1bd6e1f2e0fde53352055a4468f23e5 (libosmocore)
Change-Id: I66674a5d8403d820038762888c846bae10ceac58
This variable does not seem to be used anywere in OsmoBSC, seems to be a
remnant from OpenBSC times.
Change-Id: I5e4aa352fa5f16f6ff64738f25afd1a844fa4fcb
Pau Espin
Neels Hofmeyr
Vadim Yanitskiy
Harald Welte
Daniel Willmann
Sylvain Munaut
Oliver Smith
Martin Hauke