In Change-Id I6b7354f3b23a26bb4eab12213ca3d3b614c8154f we removed
the "dest" vty command, but we should simply ignore it and print
a related warning during start.
Change-Id: I531825061031918bbb1380e1b485b711e81bcd75
The user might not want to enable LCLS support for administrative
reasons. So let's keep it disabled by default, until somebody
explicitly enables it with "lcls-mode mgw-loop".
In the future, we may want to introduce a "lcls-mode bts-loop" where we
don't loop at the BSC-colocated MGW, but where we instruct the BTSs to
feed the RTP directly to each other. This would require a
falt/transparent IP routing between the BTSs in the RAN.
Change-Id: Ied7985056c8cd182bf16119007a08cc5be14459b
Related: OS#1602
It's not a good idea to keep extern declarations copied over
half a dozen C files. Let's move it to a header.
Change-Id: I6f643f1393ba0955d9c0cf1cf78d5c604e7b9451
The bsc_msc_connection dates back to the old pre-libosmo-sigtran
days, and 90% of the field members weren't used at all (even the
new sigtran specific ones!). Let's merge what remains into struct
bsc_msc_data.
As a side effect, the already dysfunctional "dest A.B.C.D" VTY
command has been removed from the MSC node.
There's quite a bit of fall-out in the CTRL interface, which was
the code with strongest ties to bsc_msc_connection. This was
resolved by properly porting CTRL handling over to libosmo-sigtran,
meaning that an IPA/SCCPlite connected MSC can now again send CTRL
GET/SET commands, and can also receive those selective few TRAPs
that old osmo-bsc-sccplite also sent to its MSC[s].
Change-Id: I6b7354f3b23a26bb4eab12213ca3d3b614c8154f
Related: OS#2012
We used to have hard-coded M3UA. Let's allow the user to configure
this per MSC using a new "asp-protocol (m3ua|sua|ipa)" VTY command.
For SUA this should just work 1:1 without any trouble. For IPA,
this of course only changes the underlying transport without reflecting
the various differences in terms of BSSMAP ASSIGNMENT, MGCP handling,
etc.
Change-Id: I0800c709e574cedd7f5dd98be81c78782245cd13
Related: OS#2544
Previously the MGW configuration was ignored during writing
of the MSC configuration. Let's fix this by calling the
mgcp_client_config_write() function.
Change-Id: I7d1eedb782a4f30bd089838969ce54f27cde060d
Legacy VTY commands were removed in commit
c74a5616bf
== I5cf3fec31cc774c902f3cfe6d16fb85ef301694a
Removing the dead VTY commands currently breaks our ttcn3-bts-test and is
likely to create problems with users of osmo-bsc, when their config osmo-bsc
stops working with a mere upgrade.
Instead, add deprecated dummy commands that don't do anything, to not break
existing configs.
Catch all of these legacy commands:
timeout-ping <number>
timeout-pong <number>
timeout-ping advanced
no timeout-ping
no timeout-ping advanced
by defining
timeout-ping ARG
timeout-pong ARG
no timeout-ping [ARG]
I verified manually that starting osmo-bsc with all the abovementioned VTY
commands in the config file works (and produces the deprecation messages).
Change-Id: I95a5bad1ade66ded849cfc20bebb7fc522aecc38
There is a lot of dead code in osmo_bsc_msc.c that used to handle
the IPA multiplexed SSCP lite A interface.
- remove portions of the dead code
- remove IPA Ping related VTY commands
Change-Id: I5cf3fec31cc774c902f3cfe6d16fb85ef301694a
Add 3-digit flags and use the new RAI and LAI API from libosmocore throughout
the code base to be able to handle an MNC < 100 that has three digits (leading
zeros).
The changes to abis_test and gsm0408_test show that this code now handles
3-digit MNC correctly, by not dropping the leading zero as 0xf in the encoded
PLMN.
Re-implement CTRL commands 'mcc', 'mnc' and 'mcc-mnc-apply' to preserve the
presence of the third digit of the MNC. Always reply with all leading zeros.
Adjust the expected results in ctrl_test_runner.py, to show that it works.
In VTY and CTRL, the parsing of MCC and MNC is inherently made stricter by use
of osmo_{mcc,mnc}_from_str() -- they will no longer allow surplus characters
and detect errno returned by strtol() (in contrast to atoi()).
Depends: Id2240f7f518494c9df6c8bda52c0d5092f90f221 (libosmocore),
Ib7176b1d65a03b76f41f94bc9d3293a8a07d24c6 (libosmocore),
I020a4f11791c61742a3d795f782805f7b7e8733e (libosmocore)
Change-Id: I8e722103344186fde118b26d8353db95a4581daa
Once upon a time, in the old osmo-bsc-sccplite, there was a restriction
of not being able to handle configurations with both TCH/F and TCH/H
type codecs. This time is long gone, so let's remove this constraint.
Change-Id: Iba0822f57c41cedeeb7f069be540f3a851752a23
Closes: OS#2763
This command lists the currently-active bsc_subscr and their contents,
the format looks like this:
OsmoBSC> show subscriber all
IMSI TMSI LAC Use
001010123456789 ffffffff 65534 3
001010100000001 a1b2c301 65534 1
Change-Id: Ib9c0c31a0a5a91b42fd832fa0df3460b1a440733
libosmo-sccp is the old sccp-lite-focused SCCP implementation that we
used before libosmo-sigtran was created. The new osmo-bsc in this
repository is using libosmo-sigtran and shouldn't be using parts of
libosmo-sccp anymore.
We only keep it around in configure.ac and Makefile.am for osmo-bsc_nat,
which is not even built in this repository anymore (or 'again yet'?)
Change-Id: I8f274be7d196cd7a5b1ec9ada949130fb06e984d
So far, the config would log an error upon config parsing, and then continue to
use defaults, which is super easy to miss. On errors, return CMD_ERR_INCOMPLETE
to abort the program in a config parsing error.
Be fatal for non-existing addressbook entries and for using address book
entries from mismatching cs7 instances.
Though it is mixing in cosmetic changes, add "Error:" to the output and arrange
the erratic name to the end of the message, as is customary for error messages.
Related: libosmo-sccp I2f71b9c4dd30f919d2054da81283dd7035f44f60
Change-Id: Ia4e58902a2d3757b266cf35ac89f256cfb8f0eec
osmo-bsc currently negotiates the RTP stream directly with the
BTS and reports back the RTP IP/Port on the BTS. This works fine
for a single BTS, but for Handover the port/ip pointing to the
MSC side must not change, so an entity in between the BTSs and
the MSC is required.
Integrate the mgcp-client and use osmo-mgw to switch the RTP
streams.
Depends: osmo-mgw Ib5fcc72775bf72b489ff79ade36fb345d8d20736
Depends: osmo-mgw I44b338b09de45e1675cedf9737fa72dde72e979a
Depends: osmo-mgw I29c5e2fb972896faeb771ba040f015592487fcbe
Change-Id: Ia2882b7ca31a3219c676986e85045fa08a425d7a
vty_install_default() and install_default() will soon be deprecated.
Depends: I5021c64a787b63314e0f2f1cba0b8fc7bff4f09b
Change-Id: If2edf59a687a78d6db6bc73117a27509374b0fc6
This was originally a long series of commits converging to the final result
seen in this patch. It does not make much sense to review the smaller steps'
trial and error, we need to review this entire change as a whole.
Implement AoIP in osmo-msc and osmo-bsc.
Change over to the new libosmo-sigtran API with support for proper
SCCP/M3UA/SCTP stacking, as mandated by 3GPP specifications for the IuCS and
IuPS interfaces.
From here on, a separate osmo-stp process is required for SCCP routing between
OsmoBSC / OsmoHNBGW <-> OsmoMSC / OsmoSGSN
jenkins.sh: build from libosmo-sccp and osmo-iuh master branches now for new
M3UA SIGTRAN.
Patch-by: pmaier, nhofmeyr, laforge
Change-Id: I5ae4e05ee7c57cad341ea5e86af37c1f6b0ffa77
This is the first step in creating this repository from the legacy openbsc.git.
Like all other Osmocom repositories, keep the autoconf and automake files in
the repository root. openbsc.git has been the sole exception, which ends now.
Change-Id: I9c6f2a448d9cb1cc088cf1cf6918b69d7e69b4e7
Harald Welte
Vadim Yanitskiy
Neels Hofmeyr
Philipp Maier
Pau Espin